All

Carbotech Brake Pads Carbotech Race and Track Pads For the rear of 2005 - 2014 Ford Mustang. Measuring a full 17mm thick and available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer part number: CT1465 Most popular track combination: R10 Front, R8 Rear G-Loc cross reference: GP1465 Hawk cross reference: HB485._656 Material thickness of pad of backing plate and pad material: .656" Material thickness of pad of backing plate and pad material: 17mm [img-12119-left-large_default] Carbotech Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. Carbotech CT1465 Brake Pad Fitment: 2005 FORD MUSTANG V6 - 4.0L (2005, 2005) 2005 FORD MUSTANG V8 4.6L (2005, 2005) 2005 FORD MUSTANG V6 (2005, 2005) 2006 FORD MUSTANG V6 - 4.0L (2006, 2006) 2006 FORD MUSTANG V8 4.6L (2006, 2006) 2006 FORD MUSTANG V6 (2006, 2006) 2007 FORD MUSTANG SHELBY GT (2007, 2007) 2007 FORD MUSTANG SHELBY GT500 (2007, 2007) 2007 FORD MUSTANG V6 - 4.0L (2007, 2007) 2007 FORD MUSTANG V8 4.6L (2007, 2007) 2007 FORD MUSTANG SHELBY GT500 5.4L (2007, 2007) 2007 FORD MUSTANG V6 (2007, 2007) 2008 FORD MUSTANG SHELBY GT (2008, 2008) 2008 FORD MUSTANG SHELBY GT500 (2008, 2008) 2008 FORD MUSTANG V6 (2008, 2008) 2008 FORD MUSTANG V8; GT (2008, 2008) 2008 FORD MUSTANG SHELBY GT500 5.4L (2008, 2008) 2008 FORD MUSTANG SHELBY GT500 ALL (2008, 2008) 2008 FORD MUSTANG V6 (2008, 2008) 2009 FORD MUSTANG SHELBY (2009, 2009) 2009 FORD MUSTANG V6 (2009, 2009) 2009 FORD MUSTANG V8; GT (2009, 2009) 2009 FORD MUSTANG SHELBY GT500 5.4L (2009, 2009) 2009 FORD MUSTANG SHELBY GT500 ALL (2009, 2009) 2009 FORD MUSTANG V6 (2009, 2009) 2010 FORD MUSTANG BASE OR GT WITH BREMBO FRONT CALIPERS (2010, 2010) 2010 FORD MUSTANG SHELBY (2010, 2010) 2010 FORD MUSTANG V6 MFG AFTER 3/21/2010 - EXCEPT MODELS WITH BREMBO FRONT CALIPERS (2010, 2010) 2010 FORD MUSTANG V6 MFG UP TO 3/20/2010 (2010, 2010) 2010 FORD MUSTANG V8; GT MFG AFTER 3/21/2010 - EXCEPT MODELS WITH BREMBO FRONT CALIPERS (2010, 2010) 2010 FORD MUSTANG V8; GT MFG UP TO 3/20/2010 (2010, 2010) 2010 FORD MUSTANG SHELBY GT500 ALL (2010, 2010) 2010 FORD MUSTANG V6 (2010, 2010) 2011 FORD MUSTANG BASE OR GT WITH BREMBO FRONT CALIPERS (2011, 2011) 2011 FORD MUSTANG SHELBY (2011, 2011) 2011 FORD MUSTANG V6 MODELS WITHOUT BREMBO FRONT CALIPERS (2011, 2011) 2011 FORD MUSTANG V8; GT MODELS WITHOUT BREMBO FRONT CALIPERS (2011, 2011) 2011 FORD MUSTANG 5.0L PERFORMANCE W/BREMBO BRAKES 5.0L (2011, 2011) 2011 FORD MUSTANG SHELBY GT500 ALL (2011, 2011) 2011 FORD MUSTANG V6 FRONT ROTOR FITS MODELS W/O PERFORMANCE BRAKE PKG 3.7L (2011, 2011) 2012 FORD MUSTANG BASE, GT, OR BOSS 302 WITH BREMBO FRONT CALIPERS (2012, 2012) 2012 FORD MUSTANG V6 MODELS WITHOUT BREMBO FRONT CALIPERS (2012, 2012) 2012 FORD MUSTANG V8; GT MODELS WITHOUT BREMBO FRONT CALIPERS (2012, 2012) 2012 FORD MUSTANG 5.0L PERFORMANCE W/BREMBO BRAKES 5.0L (2012, 2012) 2012 FORD MUSTANG BOSS 302 5.0L (2012, 2012) 2012 FORD MUSTANG GT BREMBO ALL (2012, 2012) 2012 FORD MUSTANG GT STANDARD BRAKES 5.0L (2012, 2012) 2012 FORD MUSTANG V6 FRONT ROTOR FITS MODELS W/O PERFORMANCE BRAKE PKG 3.7L (2012, 2012) 2013 FORD MUSTANG BASE, GT, OR BOSS 302 WITH BREMBO FRONT CALIPERS (2013, 2013) 2013 FORD MUSTANG MODELS WITH STANDARD FRONT CALIPERS AND 316MM (12.45") FRONT ROTORS (2013, 2013) 2013 FORD MUSTANG MODELS WITH STANDARD FRONT CALIPERS AND 336MM (13.23") FRONT ROTORS (2013, 2013) 2013 FORD MUSTANG SHELBY GT500 (2013, 2013) 2013 FORD MUSTANG BOSS 302 5.0L (2013, 2013) 2013 FORD MUSTANG GT PERFORMANCE BRAKES ALL (2013, 2013) 2013 FORD MUSTANG GT STANDARD BRAKES 5.0L (2013, 2013) 2013 FORD MUSTANG V6 FRONT ROTOR FITS MODELS W/O PERFORMANCE BRAKE PKG 3.7L (2013, 2013) 2014 FORD MUSTANG BASE, GT, OR BOSS 302 WITH BREMBO FRONT CALIPERS (2014, 2014) 2014 FORD MUSTANG MODELS WITH STANDARD FRONT CALIPERS AND 316MM (12.45") FRONT ROTORS (2014, 2014) 2014 FORD MUSTANG MODELS WITH STANDARD FRONT CALIPERS AND 336MM (13.23") FRONT ROTORS (2014, 2014) 2014 FORD MUSTANG SHELBY GT500 (2014, 2014) 2014 FORD MUSTANG GT BREMBO TRACK ALL (2014, 2014) 2014 FORD MUSTANG GT BREMBO W/AUTO TRANS ALL (2014, 2014) 2014 FORD MUSTANG GT PERFORMANCE BRAKES ALL (2014, 2014) 2014 FORD MUSTANG GT STANDARD BRAKES 5.0L (2014, 2014) 2014 FORD MUSTANG SHELBY GT500 ALL (2014, 2014) 2014 FORD MUSTANG V6 FRONT ROTOR FITS MODELS W/O PERFORMANCE BRAKE PKG 3.7L (2014, 2014) [img-12119-left-large_default]

Sparco Martini Racing Hoodie Full-Throttle Style, Everyday Comfort Throw on the Sparco Martini Hoodie and bring a shot of trackside heritage to your everyday lineup. Built from a buttery-soft cotton/poly blend and finished with fully embroidered logos and racing stripes, this hoodie is every bit as legit as a Martini-liveried race car. Whether you’re at the paddock, in the pits, or just daydreaming about your next session, this is the hoodie that keeps your motorsport loyalty on full display. Sparco Martini Racing Wide Stripe Hoodie Details Official Sparco Martini Racing branding with fully embroidered logos Large Martini logo across the chest for unmistakable race livery flair Soft jersey-lined hood with drawstring closure for comfort and adjustability Made from a premium 80% cotton / 20% polyester blend (300 g/m²) Front kangaroo pocket for utility and warmth Available in white, navy, red, blue, celeste, gray, or black Sizes XS–XXXL Sparco Martini Hoodie FAQs Is the Sparco Martini Hoodie officially licensed? Yes, this is part of Sparco’s official Martini Racing collection with embroidered branding—not screen printed knockoffs. How does the sizing run? This hoodie uses a European cut and fits small compared to standard US sizing. We recommend ordering one size larger than usual if you want a looser, more casual fit. Is this hoodie good for trackside wear? Absolutely. It's warm enough for morning sessions and breathable enough for garage work or casual wear. What material is the hoodie made from? It's an 80/20 cotton/polyester blend with a soft jersey-lined hood, giving you warmth without the bulk. With its clean lines, embroidered Martini stripes, and Sparco quality, this hoodie does more than keep you warm—it makes a statement. Add it to your gear lineup and wear your racing roots with pride.

Sparco Martini Crewneck Sweater The Sparco Martini Crewneck blends timeless racing style with everyday comfort. Whether you're at the paddock or just repping motorsport heritage around town, this sweater keeps it classy with embroidered Martini Racing stripes and classic crew styling in your choice of soft cotton or a warm wool blend. Minimalist from afar, legendary up close. Legendary Livery, Everyday Comfort Features: Available in two materials: 100% cotton or 50% merino wool / 50% acrylic blend Embroidered Martini Racing logos and signature tri-stripe detailing Soft-touch finish for comfort at the track or in the garage European cut – fitted through the shoulders and chest Sizes S–3XL (order one size up for US fit) Sparco Martini Crewneck FAQs: How do I choose between cotton and wool? Cotton is great for everyday wear—lightweight and breathable. The wool blend offers more warmth and is perfect for colder weather or layering. Is this sweater machine washable? The cotton version is machine washable. For the wool blend, we recommend hand washing or dry cleaning to preserve the shape and stitching. Does it fit like a typical U.S. crewneck? Not quite. This is a European-cut garment, which means it runs a bit smaller and slimmer. We recommend ordering one size up for a relaxed fit. Is this officially licensed Martini Racing apparel? Yes, it features official Sparco x Martini Racing branding, with quality embroidery and licensed design. This crewneck is built for fans of clean design, vintage livery, and modern comfort. Whether you're in the stands or behind the wheel, rep the Martini stripes with style.

Sparco Gulf Full Zip Sweatshirt *EUROPEAN FIT - This item is made in Italy with a European cut. It runs smaller when compared to standard US sizing. We recommend selecting one size up when ordering. When the wind picks up or light rain threatens your trackside prep, the Sparco Gulf Full Zip has you covered with racing-inspired functionality and sleek Gulf styling. Waterproof Feel Meets Lightweight Italian Engineering Features: • Wind/Water-Resistant Fabric: Lightweight technical weave blocks breezes and repels light rain• European Racing Fit: Made in Italy with a slimmer cut—size up for layering• Full-Length Zipper: Easy on/off in the pits or paddock without fumbling• Sizes XS–3XL: Broad range to suit every driver’s build• Two Colorways: Iconic Gulf Navy or subtle Gray to match your livery• Italian Craftsmanship: Precision stitching and durable finishes for lasting performance Sparco Gulf Full Zip FAQs: Does the Full Zip fit true to US sizing? It’s based on a European cut and runs a bit snug—ordering one size up is recommended for layering over racewear. Is this jacket fully waterproof? It’s water-resistant—perfect for light showers and wind protection but not designed for heavy downpours. How do I clean the Sparco Gulf Full Zip? Machine wash cold on a gentle cycle, hang to dry, and avoid fabric softeners to maintain water repellency. Can I wear this off the track? Absolutely—its clean lines and Gulf accents make it a weekend wardrobe standout as well as trackside essential. For a perfect blend of motorsport DNA and everyday utility, the Sparco Gulf Full Zip delivers protection and style wherever you go.

GiroDisc Magic Pad The Magic Street Pad 1718 Fits the Following: Make Model Build (Year) Front Rear Chevrolet Corvette Stingray [JL9 Standard Brake Package] 14 X Chevrolet Corvette Stingray Z51 [J55 Brake Package – Co-Cast Rotors] 14 - 15 X Chevrolet Corvette Stingray Z51 [J55 Brake Package – Full Cast Rotors] 14 - 15 X Chevrolet Corvette [Base / No Submodel / Heavy Duty] 15 - 17 X Chevrolet Corvette Z06 15 - 17 X Girodisc's "Magic Pads" offer a solution to common issues with factory brake pads such as squeaking, excessive dust, and high costs. These pads produce less dust compared to typical factory and performance pads, reducing the need for frequent wheel cleaning. Moreover, they provide excellent initial bite, a feature often lacking in more affordable pads. However, what truly sets our pads apart is their ability to effectively address brake noise problems, earning them the reputation of being a "silver bullet" solution. Crafted from a semi-metallic composition, Magic Pads are gentle on both rotors and your budget. When transitioning between different pad compounds, we recommend replacing all pads in the car simultaneously. Each set of Magic Pads includes pre-installed anti-noise shields at no extra cost. Should you have any inquiries, feel free to reach out to us – we're here to assist you!

Stilo Venti WRX Visors WRX Dirt and Short Visor Options for Stilo Venti WRX Helmets The Stilo Venti WRX Visor lineup gives racers a clean way to customize visibility, glare control, and helmet appearance for WRX helmet setups. This single listing includes the available WRX Dirt Visor and WRX Short Visor color options, allowing drivers to select the visor style and tint that best fits their racing environment. Choose from iridium, smoked, mirror, and amber finishes depending on the visor style selected. Each option is designed as a dedicated Stilo Venti WRX visor accessory for racers building out their helmet setup for dirt, rally, and off-road competition use. Available Visor Styles WRX Dirt Visor WRX Short Visor Available WRX Dirt Visor Colors Iridium Dark Blue Iridium Dark Red Iridium Dark Yellow Dark Mirror Dark Smoked Amber Available WRX Short Visor Colors Iridium Dark Blue Iridium Dark Red Iridium Dark Yellow Dark Mirror Dark Smoked Why Choose a Stilo WRX Visor? Changing visor tint can help tailor your helmet setup for different lighting conditions while giving your WRX helmet a more personalized race-ready look. The WRX visor range makes it easier to keep the correct replacement or alternate shield on hand for varying track and weather conditions. FAQs Are all Stilo Venti WRX visor colors on this listing?Yes. This listing combines the available WRX Dirt Visor and WRX Short Visor colors into one product with selectable variants. What is the difference between the WRX Dirt Visor and WRX Short Visor?The listing separates the two visor styles so racers can choose the exact WRX visor format needed for their helmet setup, then select the desired color or tint. Which colors are available for the WRX Dirt Visor?The WRX Dirt Visor is available in Iridium Dark Blue, Iridium Dark Red, Iridium Dark Yellow, Dark Mirror, Dark Smoked, and Amber. Which colors are available for the WRX Short Visor?The WRX Short Visor is available in Iridium Dark Blue, Iridium Dark Red, Iridium Dark Yellow, Dark Mirror, and Dark Smoked. Can I use this listing to order the exact Stilo visor part number I need?Yes. Each style and color selection maps to its corresponding Stilo part number in the variant dropdown. Upgrade or replace your Stilo Venti WRX visor with the exact dirt or short visor color you need for your next race weekend.

Racing Radios 3/C NASCAR Helmet Coil Cord 3-conductor NASCAR coiled cable for your helmet kit. By using a coiled cord, the driver can have greater mobility, even with the tight head containment seats used in modern race cars. The helmet side is 3.5mm and 3C (3 Conductor) and looks similar to an electric guitar or of you are old enough, 8 track headphones. DETAILS Manufacturer: Racing Radios Manufacturer part number: RR-HKP-121020 End 1 fitting: 3.5mm 3 conductor End 2 fitting: 4 gold plated terminals (male)

Racing Radios NASCAR Male Helmet to IMSA Female Chassis Adapter If you have a NASCAR 3/C plug on your helmet and an IMSA 4/C Harness in the car, this adapter will go in line between your helmet and the harness to convert your 3/C output to a 4/C output. This cable is handmade in America using a Nexus plug and magnetically shielded cabling. Racing Radios NASCAR Male to IMSA Female Adapter Details: Manufacturer: Racing Radios Manufacturer part number: RRC-10 Connector 1 / Helmet Side: NASCAR 3C Female Connector 2 / Chassis Side: IMSA 4C Male [img-2298-left-large_default]

Racing Radios IMSA Male to NASCAR Female Adapter If You Have An IMSA 4/c Plug On Your Helmet and a NASCAR 3/C Harness in the car, this adapter will go in line between your helmet and the harness to convert your 4/C output to a 3/C output. This cable is handmade in Racing Radios US office in Forest Park Georgia using genuine Nexus plugs and magnetically shielded cabling. Short Connector On Your Helmet, Long Connector on Car Harness. DETAILS Manufacturer: Racing Radios Manufacturer part number: RRC-20 Connector 1 / Helmet Side: IMSA 4C Female Connector 2 / Chassis Side: NASCAR 3C Male

Carbotech CT31 Brake Pads - Stoptech STR-21 Carbotech Brake Pads for Stoptech STR-21 calipers. Carbotech CT31 Brake Pads are offered in 1521, AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. How To Properly Bed In Carbotech Racing Brake Pads Carbotech CT31 Brake Pads - Stoptech STR-21 Details: Manufacturer: Carbotech Manufacturer Part Number: CT31 G-Loc cross reference: GP31 Hawk cross reference: HB172._500 Material thickness of pad of backing plate and pad material: .500" Material thickness of pad of backing plate and pad material: 13mm Carbotech Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. Carbotech CT31 Brake Pads - Stoptech STR-21 Fitment: Stoptech STR-21 calipers

Stilo Anti-Fog/Anti-Scratch Short Visor for the ST5 Helmet Stilo ST5 short visors fit all Stilo SA2020, SA2015, FIA 8859/8860 non-ABP model helmets. Stilo visors are available in over 4 different colors in different levels of gradient to make sure you have the perfect shield for every race condition. From the Stilo dark smoke to a selection of multiple iridiums, Stilo ST5 visors are a great way to ensure your best vision and lap time. Stilo ST5 GT Visor Part Number Chart: YA0854 ST5 Mirror dark visor YA0836 ST5 Iridium blue dark visor YA0837.2 ST5 Iridium red dark visor YA0838 ST5 Iridium yellow dark visor - Not FIA Certified High quality, Anti-fog visors shaped for the Stilo ST5 GT helmets. The Stilo ST5 series is unique in that the shield lock is located in the center position of the shield. The shield lock is released by squeezing the outboard sides together and that will then release it from the mount stud that is located in the center of the helmet. The reason for this is to "clean-up" the sides of the helmet where a side impact in a head containment seat may grab parts of the helmet. All Stilo ST5 shilds have the center release mechanism installed on it.All Stilo ST5 shields are treated with an anti-fog treatment and they do require special care. The best result we have by far is the Stilo Visor cleaner. Liberally spray the outside of the visor with the cleaner, and wipe in a single swipe with a micro fiber towel until clean and dry. If fingerprints or dirt remain, repeat as needed. A back and forth wiping motion will tend to leave lint from the rag on the visor, so the single pass works best. Repeat if necessary, but usually one pass works great.Stilo Visor Care: Do not use Windex or any glass cleaner containing ammonia, as this can harm the anti-scratch coating on the outside of the visor, and the anti-fog coating on the inside of the visor. This is the official Stilo Visor Cleaner.

Trac-Com Helmet Speaker Kit V2 This helmet kit is designed for drivers looking to add integrated speakers and a microphone to their helmet. Designed in-house by RaceCom to be a universal solution, the Helmet Kit V2 is compatible with most motorsport helmets regardless the size and shape. The Instructor Helmet Kit includes the V2 Helmet Kit with an IMSA male cable end.What makes the V2 kit different? The new V2 helmet kit takes lessons learned from the V2 Student headset and applies them to bring you the loudest, most complete, highest quality universal helmet kit available. This kit features the brand new R7 digital mic and powerfully tuned speakers all built into a compact package that will easily install to almost any helmet quickly and comfortably. TRAC COM HELMET SPEAKER KIT V2 FEATURES Two powerfully tuned speakers New R7 digital microphone Male IMSA plug on headset Strong, sturdy RaceCom cables have been pull-tested by a certified lab Meticulous build process proven to outlast and outperform all others TRAC COM HELMET SPEAKER KIT V2  INCLUDES: Helmet Speaker Kit V2

Carbotech Brake Pads How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer part number: CT722 Fits: 1999-2001 Subaru Impreza Does NOT Fit: Subaru Impreza with RS package Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F.

Alpinestars Tech-1 K YOUTH v2 Karting Shoes New external reinforcements on the heel and toe area and an ultra-thin Formula 1 spec sole with rounded heel give you unsurpassed levels of grip and sensitivity on the pedals. ALPINESTARS TECH-1 K V2 KART RACING SHOE FEATURES Innovative Alpinestars foot counter for maximum performance: an ergonomic, polypropylene heel counter provides support and stability inside the shoe, while a flatter forefoot with die-cut ribbing provides greater feel on the pedals. Ultra-thin Formula 1 specification sole uses Alpinestars exclusive rubber compound which is strategically ribbed to provide pedal sensitivity and grip - in both wet and dry conditions. ALPINESTARS TECH-1 K V2 KART RACING SHOE CONSTRUCTION Designed and developed specifically for the stresses of kart racing. Advanced hybrid construction consisting of a durable nubuck microfiber upper with strategically positioned perforated zones for lightweight performance, excellent breathability and superior feel. External toe reinforcements on both sides for additional abrasion resistance and protection. Enhanced anatomical profiling for improved levels of comfort, fit and performance. Dual asymmetric closure system incorporates adjustable ultra-thin hook-and-loop grip strap plus aramidic speed top lacing coupled with para-aramidic eyelets for durability, personalized fit and secure closure. Collar padding constructed from Nitrile rubber for comfort and weight-saving. Soft microfiber collar is cut lower at the rear to allow greater Achilles’ heel comfort and improved range of movement. Tongue features perforated soft padding for comfort and improved fit. External rear heel rubber for improved abrasion resistance and protection. ALPINESTARS TECH-1 K V2 KART RACING SHOE SIZE CHART