Garmin Ltd.
Garmin Catalyst Camera Low Profile Windshield Mounting Kit
$24.95
Garmin Catalyst Low Profile Adhesive Mounting Kit
To mount the camera for the award winning Garmin Catalyst to a race car, we prefer the Garmin Catalyst Low Profile Adhesive Mounting Kit. It includes a small low profile ball joint with an adhesive base for mounting your Garmin Catalyst Remote Cam.
DETAILS
Manufacturer: Garmin Ltd.
Manufacturer Part Number: 010-12530-04
Fits Garmin Catalyst Remote Camera
We have many racers who like to take their Garmin Catalyst from their race car to their HPDE car. The Garmin Low Profile Adhesive Mounting Kit is a track-worthy way to mount your Catalyst in your race car and your track-day car!
ISC Racers Tape
ISC Non-Skid Racers Tape (2" x 10 ft.)
$24.95
ISC Non-Skid Racers Tape
ISC Non-Skid Racers Tape is the quickest and easiest way to prevent slipping and falling with its instant, self adhesive, and anti-slip safety surface. Each 2" x 10 ft. roll is made from a heavy-duty, long lasting material that is impervious to all weather conditions. ISC Non-Skid Racers Tape will endure temperature extremes of -40º F to 220º F.
There are no messy glues or additional adhesives to gum up the works. Just peel off the backing and apply ISC Non-Skid Racers Tape to any clean, dry surface. Especially great for race trailer ramps and stairs, truck tailgates, brake and clutch pedals, and floor boards.
Sparkling black finish.
Schroth Safety Products LLC
Schroth B23A Bendable Harness Snap End Kit
$24.95
Schroth B23A Bendable Harness Snap End Kit
Schroth B23A harness ends are bendable and make racing harnesses easier where there is very little clearance. The Schroth B23A bendable snap-on harness adapter lets you bolt one end to the chassis, bend it to the needed shape, and attach your harness snap end.
Schroth B23A Bendable Harness Snap End Kit Details:
Manufacturer: Schroth
Manufacturer part number: B23A
Manufacturer alternate part number: SR 01324
Bendable Fittings: Yes (2)
Bolts: Yes (2) 7/16-24
Wavy Washers: Yes (2)
Combination Washers: Yes (2)
The B23A End Fitting Kit is a set of bolt in brackets that are usually sewn into 2" Lap belts. Schroth slang calls it a "Rallye End" kit because it usually comes on the street legal Rallye style belts. Like the 01323 kit, it is designed to be bent. These pieces are commonly used in Porsche applications where space for an Eye bolt is insufficient. This bracket can be bolted to the car, then bent so that a Snap-In bracket can be used to fix the harness to the bracket.
We use Schroth B23A brackets in many applications where stock mounting locations do not leave sufficient space, or if the thread pitch is different from the eye bolts. If you have a Miata, S2000 or are putting a large/very large seat in a full interior car this is the harness mount kit you want.
Discovery Parts
Discovery Parts Logo T-Shirt
$24.95
Fly Our Flag at Your Next Event!
These Next Level Apparel 60/40% cotton/poly t-shirts are lightweight, soft, comfortable and of course stylish. Show your support for Discovery Parts at your next race weekend, track day, autocross or cars and coffee!
We love to see these shirts popping up on Facebook, Instagram and wherever else you post your favorite track pics, so be sure to tag us! We especially love to see customers walk into our store at Atlanta Motorsports Park donning our logo, so stop by and say hello!
CMS Performance
CMS Performance Rollbar Harness Collars
$24.95
Roll Bar Collars from CMS Performance
Keep your shoulder belts or head containment net straps in place with our heavy duty but lightweight aluminum 2 piece harness guide clamp that fits 1.5" and 1.75" roll bars perfectly.
ROLL BAR HARNESS COLLAR DETAILS:
Manufacturer: CMS Performance
Manufacturer part number 1.5": RB-COLLAR-AL15-BLK
Manufacturer part number: 1.75": RB-COLLAR-AL175-BLK
Material: aluminum
Finish: satin black powder coat
Helps keep your harness shoulder belts or cage net mount in place
Two-piece design makes installation easy
Smooth radius on all edges so no scrapes or cuts when working in the area
Priced per collar
Perfectly sized to fit all roll bars with either 1.75" or 1.50" harness cross-bars. Precision-machined roll bar harness collars help keep your harness shoulder straps in exactly the right place on your roll bar. Easy to install double-split collars with high-strength Allen bolt hardware, they are available in satin black powder-coated aluminum.
Longacre
Longacre 1 3-4" Steering Wheel Hook
$23.99
Longacre 1 3/4" Steering Wheel Hook
Longacre Steering wheel hooks keep your race wheel out of the way during service and in between heats. The Longacre 52-22576 Steering wheel hook fits perfectly on all 1.75" (1 3/4") roll bars and will last many years with its durable anodized finish.
Longacre 1 3/4" Steering Wheel Hook Details:
Manufacturer: Longacre
Manufacturer Part Number: 52-22576
Material: CNC Machined Billet Aluminum
Finished: Black anodized
Mount Diameter: 1.75"
Protect your steering wheel
Bolts onto your roll bar - no welding
Lightweight billet aluminum - black anodized
Red Line
Red Line Heavy Shockproof Gear Oil
$23.97
Red Line Shockproof Heavy Gear Oil
Red Line Heavy ShockProof Gear Oil was designed for heavily-loaded racing differentials and transmissions, as well as problem gearboxes. Red Line Heavy ShockProof Gear Oil has a film thickness greater than an SAE 75W250, yet low fluid friction like 75W90.
Many performance racing applications like Sprint, Midget, Dirt Late Model and Quick-Change differentials, Detroit Lockers and spools, NHRA Top Fuel and Funny Car rear ends.
Not recommended for most synchro applications due to the product's extreme slipperiness.
Red Line
Red Line Superlight Shockproof Gear Oil
$23.97
Red Line Superlight Shockproof Gear Oil
The Super Low Friction Gear Oil for Lower Loading
Used in low-power dog-ring racing transaxles seeing moderate to low loads (e.g., qualifying, etc.) Red Line Superlight Shockproof Gear Oil has a film thickness greater than an SAE 75W90 gear oil, yet exhibits low fluid friction like ATF.
Acting like a liquid grease, this unique lubricant contains a suspension of solid microscopic particles functioning as an extreme pressure agent. This gives you the best of both worlds, balancing low drag and superior protection for gear teeth.
Red Line Superlight Shockproof Gear Oil is popular in British F3, Euro F3, and Star Mazda racing gearboxes because of its ultra-low drag.
Red Line Superlight Shockproof Gear Oil Details:
Manufacturer: Red Line
Manufacturer part no.: 58504
Unique lubricant with solid microscopic particles offers low drag/high protection
40% lower coefficient of friction and 250% greater load carrying capacity vs. conventional gear oils
Relatively low viscosity, yet cushions gear teeth under extreme pressure
Helps to prevent tooth breakage, resists throw-off
Red Line Superlight Shockproof Gear Oil can be used with pumps and coolers when equipped with an inline screen rather than a fine filter. Avoid pumping down the center of a main shaft as the unique particles could centrifuge out of solution. Designed for wet sump transmissions and differentials with splash lubrication.
Schroth Safety Products LLC
Schroth Reinforcement Plates M10
$23.75
Schroth Reinforcement Plates M10
Schrtoth SG55 reinforcement plates, also called back-up plates by many chassis builders, are used when reinforcing a harness mount point when the location has not been engineered by the auto manufacturer. Any time you mount a harness to sheet metal, you will need to put a reinforcement plate under it to keep it from ripping out of the floor.
Schroth Racing SG55 Reinforcement Plate Details:
Manufacturer: Schroth
Manufacturer part number: SG55
Length: 3.25"
Width: 2"
Welded Nut Size/Pitch: M10
Finish: Zinc Plated
Material: Steel
Quantity in kit: 1
Schroth M8 Reinforcement Back-Up Plates make for a perfect harness install. This Schroth back-up plate measures 3.25" long x 2" wide with a M10 nut welded to it. This is what comes with most Schroth harness sets to mount your harness eye bolt to.
This back-up plate is what comes standard issue with most Schroth Racing Harness kits
Red Line
Red Line MT-90 GL-4 Transmission Gear Oil
$23.50
MT-90 75W90 GL-4 - QUART
75W90 GL-4 gear oil (similar to SAE 5W40/10W40 engine oil viscosity)
Popular in Nissan, Mazda, Mitsubishi, VW/Audi, Lotus Elise/Exige, Toyota, Mendeola transmissions and Atlas transfer cases for Off Road
Offers quicker shifts, perfect synchronizer coefficient of friction
Safe for brass synchros, as it lacks the reactive sulfurs found in most GL-5 oils that cause damage
High performance gear protection and longer synchro life
Eliminates notchy shifting, even when cold
Satisfies the gear oil viscosity requirements of 75W90, 80W90, 90 and motor oil viscosities of SAE 40, 10W40 and 15W40
Recommended for GL-1, GL-3 and GL-4 applications, as well as where most special synchromesh fluids are specified
Lifeline Fire & Safety Systems
Lifeline T Handle Fire Extinguisher Pull Cables 6 foot
$22.99
Lifeline T Handle Fire Extinguisher Pull Cables 6 foot
6 foot pull cable for Lifeline mechanical systems. Generally used for interior applications.
Longacre
Longacre 1 3-4" Helmet Hook
$22.99
Longacre 1 3/4" Helmet Hook
Longacre Helmet Hooks keep your race helmet off the floor and safe from scratches and damage. The Longacre 22570 Helmet Hook fits perfectly on all 1.75" (1 3/4") roll bars and will last many years with its durable anodized finish.
Longacre 1 3/4" Helmet Hook Details:
Manufacturer: Longacre
Manufacturer Part Number: 22570
Material: CNC Machined Billet Aluminum
Finish: Black anodized
Mount Diameter: 1.75"
Protect your helmet
Bolts onto your roll bar - no welding (choose size above)
Lightweight billet aluminum - black anodized
Longacre
Longacre 1 1/2" Helmet Hook
$22.99
Longacre Helmet Hook - 1.5"
Longacre Helmet Hooks keep your race helmet off the floor and safe from scratches and damage. The Longacre 22572 Helmet Hook fits perfectly on all 1.5" (1 1/2") roll bars and will last many years with its durable anodized finish.
Longacre 1 1/2" Helmet Hook Details:
Manufacturer: Longacre
Manufacturer Part Number: 22572
Material: CNC Machined Billet Aluminum
Finished: Black anodized
Mount Diameter: 1.5" Protect your helmet
Bolts onto your roll bar - no welding
Lightweight billet aluminum - black anodized
Allstar Performance
Allstar Performance Brake Bleeder Bottle Kit With Magnet
$22.95
Allstar Brake Bleeder Bottle Kit With Magnet
Contain The Mess Of Bleeding Your Brakes!
Bleeding brakes is a lot cleaner and easier with the Allstar Brake Bleeder Bottle Kit. This rugged magnet-mounted bottle features a no spill/no leak hose storage bung and bottom tube fluid entry. The 12" tube fits over most brake bleed screws
The large 16 oz. bottle holds twice the fluid as most other bottles, allowing more flushes before having to empty it. The magnet-mounted bottle easily sticks to your steel chassis parts, brake rotor, or multiple locations on the vehicle and stores away easily in your tool box. No-leak design for storage makes clean-up easy.
Allstar Brake Bleeder Bottle Kit w/ Magnet Details
Manufacturer: Allstar Performance
Manufacturer part number: 11018
Brake Bleeder Hose Included: Yes
Capacity: 16 oz.
Allstar Performance
Allstar Performance Brake Bleeder Bottle Kit With Lanyard
$22.95
Allstar Brake Bleeder Bottle Kit With Lanyard
Bleed Your Brakes and Contain The Mess!
Contain the mess of bleeding brakes by capturing fluid in this 16oz. bottle with a 12" long hose which attaches to most bleeder screws. The removable cap has a built-in fitting to secure the hose during storage to help prevent spills and a steel lanyard retainer that suspends the bottle from a chassis or suspension component during bleeding.
The bottle features a coated stainless lanyard that's great for hanging the bottle right where you need it, and it stores away easily in your tool box when you're done. The no-leak design makes clean-up and storage easy.
Allstar Brake Bleeder Bottle Kit w/ Lanyard Details
Manufacturer: Allstar Performance
Manufacturer part number: 11019
Brake Bleeder Hose Included: Yes
Capacity: 16 oz.
Sabelt S.p.A.
Sabelt UI-100 Nomex Socks (8856-2000)
$22.66
$35.00
Sabelt UI-100 Nomex Socks
The Sabelt UI-100 socks feature a blend of Aramidic (Nomex) and Viscose fibers, creating a soft, comfortable fit that performs well under all conditions. Calf length style socks for maximum protection.
Made in Italy, white fabric only.
FIA 8856-2010 homologated.
