CMS Performance Bolt In Roll Bar For BMW G87 M2 (2023+) THE PREMIUM ROLL BAR FOR THE POWERFUL NEW M2 Introducing the CMS Performance Roll Bar for the all-new, amazing G87 M2*.  The powerful new M2 promises to be a hoot on the track-day circuit, so we got to work right away engineering a bolt-in roll bar that lives up to Competition Motorsport's tradition of building the strongest, safest, most beautifully constructed roll bars on the market. The new CMS Performance roll bar for the G87 delivers on all points! ENGINEERED FOR SAFETY AND PERFORMANCE Click Here for Installation Instructions Conceived from the ground up with a premium on safety and structural rigidity, the exceptional design of the CMS Performance M2 roll bar integrates perfectly with the M2's luxury/sport interior. CMS Performance uses advanced Docol R8 Advanced High-Strength Steel tubing throughout our roll bars, giving you unequalled tensile strength and occupant protection. Docol R8 is 15% stronger than 4130 CrMo steel and 30% stronger than mild (DOM) steel used in other bolt-in roll bars. It is superior in every way: resistance to deformation, weld strength, and energy dissipation. The one-piece main hoop with fully-integrated X-bracing and harness bar bolts directly to the M2 chassis, forming the backbone of the CMS Performance roll bar. Rearward kicker supports are optimized for support in a roll-over event while maintaining an unobstructed rear view. The harness bar is specifically designed to locate racing harness shoulder straps at the proper angle (0° to -20°) to the driver's shoulders regardless of seat position. CUTTING EDGE MATERIALS, DIRECT BOLT-IN The CMS Performance BMW M2 Roll Bar is designed to bolt directly to the M2 chassis strong points without the need for any modification of existing interior trim or use of backing plates. Adding a CMS custom designed rear seat delete gives the whole installation a clean, factory appearance. Full 360o TIG welding throughout gives the CMS Performance Roll Bar unsurpassed strength and durability. Each roll bar includes custom powder coating in your choice of matched G87 M2 factory colors. Or you can choose a standard color like Satin Black (for a stealthy install). We have access to over 5,000 powder coat colors, so if you need a color not on the list, just give us a call and we'll make sure your M2 roll bar has the look you like! BRAUN AND BEAUTY COMBINED Our unwavering focus on using cutting-edge materials, unsurpassed design & construction, and premium fit & finish has taken CMS Performance roll bars to the top of the industry. The BMW G87 M2 roll bar is the latest addition to our growing catalog, bringing safety, integrity, and beauty to customers taking their new M2 to the track! * Note: This roll bar does not fit cars equipped with the optional factory sunroof. CMS PERFORMANCE BMW G87 M2 ROLL BAR DETAILS Manufacturer: CMS Performance Materials: Docol R8 advanced high-strength steel tubing, 1.75 x 0.095; CNC-cut carbon steel mounting plates; CNC-machined solid steel interlocking roll-bar joints Construction: full penetration 360º TIG welding Finish: powder coat, custom colors at no extra charge Rear seat delete: optional Design features: one-piece main roll hoop with six-point bracing; three-piece support kickers to ease installation Hardware included: all necessary American-made Grade 8 installation hardware BMW G87 M2 Roll Bar Features & Options: Optional custom-designed rear seat delete for a factory-finished appearance Factory powder coat colors plus custom finishes at no additional charge Schroth Profi II ASM four-point harnesses have a patented anti-submarine design to give you racing harness safety with your factory BMW seats Roll Bar Harness Collars help keep your shoulder straps where you want them Allows full seat travel with virtually any seat Detailed installation instructions Installation requires removal of the factory rear seats. This product is intended for off-road use only.

CMS Performance Roll Bar for S197 Mustang This Roll Bar Fits the Following Cars: Ford Mustang S197 (2005 -2014), all except convertible Click Here for Installation Instructions HANDS DOWN THE BEST ROLL BAR FOR THE S197 MUSTANG The CMS Performance S197 Mustang Roll Bar is the strongest, safest, and most beautifully constructed roll bar on the market. In designing the Mustang roll bar, safety, strength, and structural integrity were primary goals. That's why the CMS Performance S197 roll bar is fully TIG welded from ultra-strong Docol R8 Advanced High-Strength Steel sized 1.75" diam x 0.095" wall, vs. the mild-steel tubing others use. Docol R8 is 30-35% stronger than DOM mild steel and even 10-15% stronger than 4130 CrMo steel. This allowed us to design a roll bar that is stronger and lighter. Precision CNC machined interlocking roll bar clamps, made to our specifications in the USA, make joining the main hoop and kickers easier during installation while giving the CMS Performance roll bar a premium, finished look. INCREASE YOUR SAFETY AND LOOK GOOD DOING IT Safety is the main reason to install a roll bar in the first place. So the CMS Performance S197 Mustang Roll Bar is designed to place your harness shoulder straps at both the proper angle (0 to -20 ) and distance to the driver. The rear kickers bolt to a strong existing bulkhead, requiring no reinforcement plates beneath the floor pan. Our use of state-of-the-art Docol ultra-high-strength-steel tubing throughout allows us to keep the driver's rear view unobstructed by diagonal braces, which also keeps weight down. Every detail is engineered with safety and structural integrity as our primary goal. AMERICAN MADE AND HAND-CRAFTED COOL The second reason to install a roll bar is because it really complements the aggressive, race-inspired styling of the Mustang. We get that. So each bar is crafted by hand by master fabricators, TIG welded for the ultimate in durability, and custom powder coated in our facility (at no extra charge). We've color-matched powder to most of Ford's factory paint colors for a truly customized look, or you can choose from thousands of custom colors and finishes to give your car a personalized look that will last. Going from raw Docol tube stock to a gleaming finish, every roll bar is handcrafted by our most experienced cage- and race car builders. Nothing is left to chance. The CMS roll bar is designed to give you an unobstructed view through your rear window. None of your plastic interior trim needs to be removed or cut, just a little carpet that is hidden away. So if you ever need to put your car back to stock, it will look as though the roll bar was never there. EASY INSTALLATION AND OPTIONAL HARNESSES COMPLETE YOUR SAFETY UPGRADE Complete, detailed instructions make installation pretty simple (figure about two hours if you're reasonably handy; having a buddy helps!) All the supplied installation hardware is American made: Grade 8 mounting hardware and an industrial carbide drill bit. So you don't have worry that you don't have what you need for a flawless installation. You can add four-point Schroth Profi II ASM Harnesses specifically designed for use in cars with no sub-strap cut-through in the seat (like the Mustang). Many customers also add CMS Locking Harness Collars to keep harness shoulder straps right where you want them (they're not required for safety, but a lot of people like the look!). CMS PERFORMANCE S197 MUSTANG ROLL BAR DETAILS Manufacturer: CMS Performance Manufacturer part no.: PRB197 Materials: Docol R8 advanced high-strength steel tubing 1.75 x 0.095; CNC-cut carbon steel mounting plates; CNC-machined solid steel interlocking roll bar joints Construction: full penetration 360º TIG welding Design features: one-piece main hoop and three-piece rear kicker make installation simple; allows full seat travel with any seat Weight: 52 lbs. (23.6 kg) Designed, built, and powder-coated by CMS in the USA Includes all necessary hardware including carbide drill bit Roll bar installation in the Mustang requires removal of the rear seats. This product is intended for off-road use only.

CMS Performance Bolt-In Roll Bar For Gen 5 Chevy Camaro (2010-2015) This Roll Bar Fits the Following Cars: Chevrolet Camaro, Gen 5 (2010-2015), all coupes Does not fit convertible THE STRONGEST ROLL BAR AVAILABLE FOR THE GEN 5 CAMARO Click Here for Installation Instructions The CMS Performance Camaro Roll Bar is the strongest, safest, and most beautifully constructed roll bar on the market. In designing the Camaro roll bar, safety, strength, and structural integrity were the primary goals. Fully TIG welded from Docol R8 Advanced High-Strength Steel allows CMS Performance to design a roll bar that is stronger and lighter! Our innovative design maximizes the room for the factory Recaro seats, meaning taller drivers can send their seat all the way back and still maintain a comfortable recline. Precision CNC machined solid steel interlocking roll bar clamps on the kicker mounting plates help make installation a snap. Free custom powder-coating gives you a premium, finished look without breaking the budget. Add the optional custom-cut Rear Seat Delete Kit and you've got a fully trimmed-out roll bar installation that performs as great as it looks. The CMS Performance Gen 5 Camaro Roll Bar is the perfect foundation for taking your safety up a huge notch. SAFETY IS CMS PERFORMANCE FIRST PRIORITY Safety is the main reason to install a roll bar in the first place. As racers themselves, CMS Performance sweat the details. That's why they use 1.75" x .095" Docol R8. Docol is 15% stronger than 4130 CrMo, and much less brittle. Docol R8 also dissipates impact energy more effectively. It's the same tubing used in full-competition road racing roll cages because, first and foremost, it's a roll bar not a trim piece. The beefy main hoop of the CMS Performance Gen 5 Camaro Roll Bar straddles the rear seat cross member, a much stronger location than the rear footwell, eliminating the need for underbody backing plates. Taking a cue from NHRA cage design, the diagonal supports feature a concave design to allow full front-seat travel while distributing roll-over energy between the main hoop and kickers. The harness cross-bar is precisely located to put your shoulder straps at both the proper angle (0 to -20 ) and distance to the driver. Finally, the rear kickers bolt to a reinforced corner of the rear seat floor, again requiring no backing plates beneath the floor pan. A clear rear view is a safety concern. CMS Performance uses stronger materials and innovative design, making it safe to keep your rear view unobstructed by additional bracing. This also helps weight down. Every detail of the CMS Performance Gen 5 Camaro Roll Bar is engineered with safety as the primary goal. HAND CRAFTED IN AMERICA Okay, another reason people install roll bars is because they look cool. We're all car guys, we get that. Each CMS Performance roll bar is handcrafted right here in America by master fabricators for a perfect fit, beautifully 360o TIG welded for high strength, and fully powder-coated in our facility for a brilliant, durable finish. There's no extra charge for custom colors. CMS Performance operates a complete powder-coating facility to offer you color-matched Camaro factory colors, giving your Camaro a personalized look that will last. None of your interior trim panels need to be eliminated or cut. Your rear seat back can be re-installed, or you can opt for our custom Shrader rear seat delete, the perfect place to put a track bag, helmet and HANS, driver cooling system, etc. (you can hide stuff under there, too). If you ever want to put your car back to stock, it will go back together as though the roll bar was never there. Complete, detailed instructions make installation pretty simple (figure about two hours if you're reasonably handy), and all Grade 8 hardware needed is shipped with your CMS roll bar. Add Racing Harnesses and a Head-And-Neck Restraint and and you're ready to hit the track safe and secure. CMS PERFORMANCE GEN 5 CHEVY CAMARO ROLL BAR DETAILS 1.75 Ä≥ X .095" Docol R8 Advanced High-Strength Steel for superior safety Full 360o TIG welding for ultimate strength, integrity, and beauty Stronger one-piece main hoop/kicker design with detachable kicker feet for installation Only 51 lbs., yet incredibly strong Custom-made rear seat delete available Precision CNC-cut mounting plates Designed, built, and powder-coated in the USA CNC machined steel interlocking roll bar clamps ease installation Allows full seat travel with any seat Straightforward install and perfect fitment Comes with all necessary hardware This product is intended for off-road use only.

CMS Performance Bolt In Roll Bar For Toyota GR Supra (2020+) This Roll Bar Fits The Following Cars: Toyota GR Supra 3.0 Toyota GR Supra 2.0 THE PREMIUM ROLL BAR FOR YOUR AMAZING SUPRA Click Here for Installation Instructions The CMS Performance Roll Bar is the strongest, safest, most beautifully constructed bolt-in roll bar on the market for the Toyota Supra GR. Engineered with a premium on safety and structural rigidity, the exceptional design integrates perfectly with the Supra's luxury/sport interior. CMS uses only advanced Docol R8 Advanced High-Strength Steel tubing throughout each roll bar, giving you unequalled tensile strength and occupant protection. Docol R8 is 15% stronger than 4130 CrMo steel and 30% stronger than mild (DOM) steel used in other bolt-in roll bars. It is superior in every way: resistance to deformation, weld strength, and energy dissipation. CMS Performance's one-piece main hoop with fully-integrated X-bracing and harness bar bolts directly to the chassis, forming the backbone of the CMS Performance Roll Bar. Rearward "kicker" supports are optimized for support in a roll-over event while maintaining an unobstructed rear view. The harness bar is designed to put your racing harness shoulder straps at the proper angle (0 to -20º) relative to your shoulders, regardless of seat position. AMERICAN-MADE DESIGN EXCELLENCE SETS CMS APART The CMS Performance Toyota GR Supra Roll Bar is designed to bolt directly to the Supra chassis strong points without the need for any modification of the chassis or use of backing plates. Full 360o TIG welding throughout gives the CMS Performance Roll Bar unsurpassed strength and durability. Each roll bar includes custom powder coating in your choice of matched Supra factory colors, satin black for a more stealthy appearance, or any of over 5,000 custom powder coat colors for a truly customized look. Check out the amazing Superchrome example in the photos! An unwavering focus on using cutting-edge materials, unsurpassed design & construction, and premium fit & finish has taken CMS Performance Roll Bars to the top of the industry. The Toyota Supra roll bar is the latest addition to their growing catalog, bringing safety, integrity, and beauty to customers taking their Toyota Supra to the track! CMS PERFORMANCE TOYOTA SUPRA ROLL BAR DETAILS Manufacturer: CMS Performance Manufacturer part no.: CPRB-GRSupra Materials: 1.75" X .095" Docol R8 Advanced High Strength Steel throughout (stronger than 4130 CrMo); CNC machined high-strength-steel interlocking joints Design: one-piece main hoop for superior strength and occupant safety; proprietary kickers ease installation w/o seat removal; CNC precision-cut mounting plates Construction: 360º TIG welded Allows full seat travel with virtually any seat Installation hardware: USA-made Grade 8 hardware included Installation instructions included This product is intended for off-road use only.

CMS Performance Bolt In Roll Bar For BMW F87 M2 (2016-2021) This Roll Bar Fits the Following Cars: BMW M2 (N55) 2016-2018 BMW M2 Competition (S55) 2019-2020 BMW M2 CS 2020-2021 THE PREMIER BOLT-IN ROLL BAR FOR THE ICONIC M2 The CMS Performance Roll Bar is the strongest, safest, most beautifully constructed bolt-in roll bar on the market for the BMW M2, M2 Competition, and M2 CS. Engineered with a premium on safety and structural rigidity, the exceptional design integrates perfectly with the M2's luxury/sport interior. CMS uses only advanced Docol R8 Advanced High-Strength Steel tubing throughout each roll bar, giving you unequalled tensile strength and occupant protection. Docol R8 is 15% stronger than 4130 CrMo steel and 30% stronger than mild (DOM) steel used in other bolt-in roll bars. It is superior in every way: resistance to deformation, weld strength, and energy dissipation. Our one-piece main hoop with fully-integrated X-bracing and harness bar bolts directly to the chassis, forming the backbone of the CMS Performance Roll Bar. Rearward "kicker" supports are optimized for support in a roll-over event while maintaining an unobstructed rear view. The harness bar is specifically designed to locate racing harness shoulder straps at the proper angle (0 to -20 ) to the driver's shoulders regardless of seat position. The CMS Performance BMW M2 Roll Bar is designed to bolt directly to the M2 chassis strong points without the need for any modification of existing interior trim or use of backing plates. Adding a CMS custom designed rear seat delete gives the whole installation a clean, factory appearance. Full 360o TIG welding throughout gives the CMS Performance Roll Bar unsurpassed strength and durability. Each roll bar includes custom powder coating in your choice of matched M2 factory colors, satin black for a more stealthy appearance, or any of over 5,000 custom powder coat colors for a truly customized look. Our unwavering focus on using cutting-edge materials, unsurpassed design & construction, and premium fit & finish has taken CMS Performance Roll Bars to the top of the industry. The BMW M2 roll bar is the latest addition to our growing catalog, bringing safety, integrity, and beauty to customers taking their M2 to the track! Click Here for Installation Instructions CMS PERFORMANCE BMW F87 M2 ROLL BAR OPTIONS CMS premium Rear Seat Delete Kit is custom-designed for the F87 M2, giving your roll bar installation a factory-finished look. Schroth Profi II ASM four-point harnesses have a patented anti-submarine design to give you racing harness safety with your factory BMW seats. CMS Roll Bar Harness Collars help keep your shoulder straps safely and securely in place on the harness cross-bar. CMS PERFORMANCE BMW F87 M2 ROLL BAR DETAILS Manufacturer: CMS Performance Manufacturer part no.: CPRB-F87 Materials: Docol R8 Advanced High Strength Steel tubing 1.75 x 0.095; CNC-cut carbon steel mounting plates; CNC-machined solid steel interlocking roll bar joints Construction: full penetration 360º TIG welding Design features: one-piece main hoop for strength; three-piece kickers ease installation; allows full seat travel with virtually any seat Optional custom-designed rear seat delete All American-made Grade 8 hardware included Detailed installation instructions Installation requires removal of the factory rear seats. A rear seat delete kit is recommended but not required for roll bar installation. This product is intended for off-road use only.

CMS Performance Bolt-In Roll Bar For Porsche 987 Cayman Fits the Following Cars: Porsche 987 Cayman (2007-12) Porsche 987 Cayman S (2006-12) Porsche 987.2 Cayman R (2011-12) HANDS DOWN THE BEST ROLL BAR FOR THE 987 The CMS Performance Roll Bar is the strongest, safest, and most beautifully constructed roll bar on the market for your Porsche 987 Cayman (base, S, GTS, or R). In designing our roll bar, safety and structural rigidity were our primary goals. That's why we use 1.75" x .095" premium Docol R8 Advanced High-Strength Steel tubing, vs. the weaker, more brittle 4130 tubing others use. Click Here for Installation Instructions RENOWNED CMS PERFORMANCE ATTENTION TO DETAIL Our attention to detail puts your harness shoulder straps at the proper angle (0 to -20 ) and distance relative to the driver, regardless of seat position. Our unique design provides an ideal mount for a Smarty Cam video camera. Our use of thicker state-of-the-art Docol tubing throughout allows us to keep the driver's rear view unobstructed by diagonal bracing, giving you unfettered access to the engine cover with the roll bar in place. (Our competitors make you remove part of your roll bar to get at your engine, risking damage to the bar and your interior!) The CMS roll bar's rear kickers bolt to the Cayman's rear shock towers, the safest, strongest mounting points. This allows the roll bar to contribute tremendous rigidity to your chassis and suspension. The main roll hoop is mounted to the frame structure across the rear bulkhead for lighter weight and superior strength. EXCEPTIONAL STRENGTH & UNCOMMON BEAUTY Each CMS roll bar is fully powder coated in your choice of colors custom-matched to Porsche's 987 color palette, or you can choose from over 6,000 custom colors -- no extra charge. Fully TIG welded by our master welders, using superior materials, and custom powder coated in-house by CMS Coatings. The design, strength, fit, and finish of the CMS roll bar all add up to this: you can spend more on a roll bar, but you only get the best from CMS. CMS PERFORMANCE PORSCHE 987 ROLL BAR DETAILS 1.75" X .095" Docol R8 Advanced High-Strength Steel for superior strength and safety Fully TIG welded for durability, strength, and beauty One-piece main hoop for incredible strength and safety. Full access to your engine without removal of any part of the roll bar Minimal cutting of trim required, for a factory-installed look CNC plasma-cut mounting plates Designed, built, and powder-coated by CMS in the USA CNC machined high-strength steel interlocking clamps to ease installation Allows full seat travel with any seat Straightforward installation and perfect fitment Detailed installation instructions and all necessary hardware included This product is intended for off-road use only.

CMS Performance Bolt-In Roll Bar for Porsche 991 GT2RS, GT3 & GT3RS This Roll Bar Fits the Following Cars: 991.1 Porsche GT3 (2014-15) 991.1 Porsche GT3RS (2016)  991.2 Porsche GT3 (2018-19) 991.2 Porsche GT3RS(2019) 991.2 Porsche GT2RS(2018) THE BEST ROLL BAR FOR PORSCHE'S GT TRACK ANIMAL The CMS Performance 991 Roll Bar is the strongest, safest, and highest quality bolt-in roll bar on the market for your GT2RS, GT3 or GT3RS, period. In designing and building the CMS roll bar, safety and structural rigidity are our primary goals. That's why we fully TIG welded 1.75" Docol R8 Advanced High-Strength Steel tubing instead of the less-expensive but inferior 4130 CrMo others use. It's why CMS Performance uses the strongest chassis mounting points and cross-brace the main hoop. Click Here for Installation Instructions AMERICAN CRAFTSMANSHIP & ATTENTION TO DETAIL The CMS roll bar places your safety harness shoulder straps at the proper angle (0º to -20º) and distance (as close as possible) to the driver, regardless of seat position. CMS Performance uses thicker Docol tubing and main-hoop cross bracing to give you an unobstructed rear view without the need for additional bracing. That adds up to safety superior to that of other products we've seen for sale. CMS rear kickers bolt to the Porsche 991 rear shock towers (where the factory racing roll cage mounts), the safest, strongest mounting points. This adds rigidity to the chassis and suspension. The main roll hoop is mounted to the steel frame structure beneath the vehicle just like the factory cage. CMS PERFORMANCE MEANS STRENGTH & BEAUTY Fully TIG welded by master welders and professionally powder-coated in-house, the structural integrity, fit, and finish of the CMS Performance Porsche 991 GT2RS/GT3/GT3RS Roll Bar is absolutely unsurpassed. CMS Performance offers a full range of powder-coat colors professionally matched to Porsche OEM paint codes. Or you can choose a custom color from thousands of Prismatic Powders shades, including, of course, a beautiful matte black if stealth is more your thing. Powder coating is included in the price of your CMS Performance roll bar. Superior engineering, design, quality, safety, and appearance at an affordable price, backed by our legendary customer service all add up to this: you can pay a lot more for a roll bar, but you'll only get the best from CMS. ADD RACING HARNESSES FOR SAFETY AND SAVINGS! Add six-point Schroth Enduro 2x2 GT3 , Schroth Flexi 2x2 GT3 , or Sabelt Silver Series GT3 , or four-point Schroth Profi II ASM GT3  harnesses to your order with our convenient pull-down menus above. These harnesses are specifically designed to bolt right up to your Porsche carbon lightweight bucket seats. (Porsche's passenger-side seat does not typically have a sub-strap pass through.) If you're installing six-point harnesses in your Porsche, we strongly recommend adding the CMS Performance Sub Strap Mounts to your order. They provide a solid, properly located anchor for your antisubmarine straps and are very easy to install. CMS PERFORMANCE PORSCHE 991 GT2RS/GT3/GT3RS ROLL BAR DETAILS 1.75"x0.095" Docol R8 Advanced High-Strength Steel tubing for superior strength Full-penetration 360o TIG welding throughout One-piece main hoop and three-piece kicker make installation so much easier CNC-cut precision mounting plates CNC-machined steel interlocking clamps ease installation US-made Grade 8 hardware included Full seat travel with any seat Comes with detailed installation instructions & all necessary hardware for a seamless installation This product is intended for off-road use only.