Chillout Systems
Chillout Pro Sport Single Layer SFI Rated Balaclava
$79.00
CHILLOUT PRO SPORT SINGLE LAYER FIRE RESISTANT SFI RATED BALACLAVA
SFI ONLY!
The CHILLOUT PRO SPORT underlayers are turning the racing world on its head with the latest technology which will give you a performance advantage on the track. The Pro Sport flame and heat resistance underlayers are thermal regulating which can reduce your skin temperature by up to eight degrees which will quicken your reflexes and reaction time on the track.
The Ultralight weight materials prioritize airflow to help you regulate your body temperature during the heat of battle on the track. The Chillout Pro Sport underwear is the only SFI approved thermal regulating underlayers available on the planet to be sure you meet the most stringent homologation standards for your race sanctioning body. The Chillout Pro Sport underlayers sport antibacterial technology woven into every thread to neutralize 99% of bacteria to keep you fresh and focused on the track regardless of the length of your driving stint. If you are serious about winning, then you need the Chillout Pro Sport underlayers in your gear bag.
SFI Homologation Specification: 3.3
Sizes: ONE SIZE
Colors: BLACK, CHARCOAL, WHITE
Composition: 42% M-Aramide, 42% Viscose FR, 16% EA
PERFORMANCE CHILLOUT PRO SPORT UNDERLAYERS
SIZING AND USAGE CHILLOUT PRO SPORT UNDERWEAR
All users shall ensure that the Chillout Pro Sport garments are not too tight, as this reduces the level of protection, and that they are also comfortable to wear under the actual conditions of use.
Wearers are warned of the particular vulnerability of the neck, wrists, and ankles. The neck, wrist, and ankles shall always be covered by at least two articles of protective clothing.
The balaclava and top underlayers shall overlap by a minimum of 3cm / 1.2" around the driver's neck, except at the front center line where there shall be 8cm / 3.2" overlap. The top and bottom underlayers shall overlap by a minimum of 7cm / 2.8" around the drivers waist.
MAINTENANCE CHILLOUT PRO SPORT UNDERWEAR
Chillout PRO SPORT Flame Resistant underwear must be cleaned and ironed according to the instructions on the label and always to be handled with care. Drivers should replace any and all items as soon as they show signs of wear. Please note that the materials are light sensitive and should not be exposed to direct sunlight for a prolonged period of time. Sunlight especially can cause changes in the shade of colors and begin the premature aging of the materials.
CLEANING/MAINTENANCE CHILLOUT PRO SPORT UNDERLAYERS
The clothing items must be cleaned and ironed following the instructions provided on the label and handled with due care and attention at all times. Garments showing signs of wear should be replaced promptly. It is important to be aware that the materials used in the clothing are sensitive to light and should not be exposed to direct sunlight for prolonged periods. Exposure to sunlight can result in changes to the colors and premature aging of the materials. If your clothing sustains damage such as tears, abrasions, or exposure to heat and flames, it must be replaced. However, if minor tears can be repaired, the same materials and fabrics originally used in manufacturing must be utilized for the repair. Chillout Systems bears no responsibility for any damage incurred by users or third parties due to improper use, abuse, or incorrect maintenance of the clothing, including any improperly repaired garments.
EEC CERTIFICATION/GUARANTEE CHILLOUT PRO SPORT UNDERWEAR
Chillout Systems clothing is certified in compliance with Directive 89/686/EEC and the essential safety requirements outlined in Document II of the directive. Certification has been issued by CSI s.P.a.'s head office, a certified body of the European Commission (No. 0497), with additional production controls conducted by CSI s.P.a. itself.
Stilo
Stilo ST6 GT 8860-2018 Carbon Fiber Helmet
$3,100.00
Stilo ST6 GT Carbon Fiber 8860-2018 Racing Helmet
The Legendary Stilo Carbon Helmet - Forever Ahead
For over 25 years Stilo has lead the way in racing helmet innovation, and the new ST6 line marks a bold new chapter. With input from Porsche and F1 teams, Stilo developed enhanced front and top aerodynamics to deliver exceptional performance from the new Stilo ST6 line of helmets. Developed with the world's top drivers from Formula One and endurance racing, the ST6 reflects real-world needs at ever level of auto racing. The ST6 carbon fiber helmet is one of the lightest helmets on the market. Featuring enhanced airflow, visibility, and comfort while maintaining market-leading safety standards. Developed with input from the Aston martin F1 team, every feature of the ST6 including the track-tested aerodynamics and a cutting edge dual lock visor system, its designed to give racers a performance edge.
The Brand New Stilo ST6 helmet improves on the market-leading Stilo ST5 in every way including;
10% Lighter than Stilo ST5
26% More Airflow than Stilo ST5
11% More Visibility
More Comfortable Liner and Cheek pads
More Shell Sizes for Lower Weight
Better Visor Construction for Durability and Ease of Care
Higher Quality Visor Hardware for Increased Reliability
Stilo ST6 GT 8860 Carbon Fiber Auto Racing Helmet Features
Puro Tech - Stilo's proprietary carbon fiber manufacturing process eliminates the need for extra lacquers or additional coatings, minimizing the weight of your new helmet. With the Puro process, Stilo delivers the lightest and safest helmet on the market.
New Shell Size Options - Now offered in three shell sizes, the Stilo ST6 auto racing helmet allows you to receive the lightest and smallest shell size possible for your head shape.
Increased Airflow Design - by utilizing our key partnerships with Formula One teams we have redesigned our front ventilation to increase airflow while maximizing safety. The new Stilo ST6 also comes standard with ventilation holes in the top channeling airflow through the EPS foam to reduce sweat and moisture to keep you performing at your best.
Increased Downward Visibility - with input from professional drivers around the globe, Stilo has increased the downward Field of view of the Stilo ST6 carbon fiber helmet creating a wider field of vision for greater awareness on the track.
Interior Comfort - New and improved, the Stilo ST6 carbon fiber helmet cheek padding is redesigned to enhance stability and increase comfort.
Injection Molded Visor - brand new high performance visors provide exceptional vision and are coated in a new high performance washable anti-fog treatment.
Dual Visor Lock - pioneering the industry, this dual visor lock complies with FIA standards both in fully closed and ventilation positions.
Updated Visor Hardware - designed for easy installation and smoother activation, this visor hardware can be purchased in a variety of anodized finishes.
Stilo ST6 GT 8860-2018 Carbon Fiber Auto Racing Helmet Sizing Note
We have found that customers who typically wear a size 59 in other brands are most comfortable in a Stilo size 60, which uses the large shell. Please order accordingly.
Stilo ST6 GT 8860-2018 Carbon Fiber Helmet Details
Manufacturer: Stilo Helmets
Manufacturer part number: AA0800AG1R
Homologation: FIA 8860-2018
Compatible shields: Stilo ST6 helmet shields
Noise-attenuating earmuffs included
Other Versions of the Stilo ST6 Racing Helmet
Stilo ST6 GT SA2020 Carbon Fiber Helmet
Stilo Helmet ST6 FN 8859-ABP Helmet
Stilo ST6 FN Zero 8860-2018 Carbon Fiber Helmet
Stilo ST6 FN Zero ABP 8860-2018 Carbon Fiber Helmet
Stilo ST6 GT Composite Helmet
Stilo ST6 FN 8859-ABP Helmet
Stilo ST6 FN 8860 Carbon Fiber Helmet
Stilo ST6 FN 8860-ABP Carbon Fiber Helmet
Stilo ST6 FN Carbon Fiber Helmet
Stilo ST6 GT ZERO 8860-2018 Carbon Fiber Helmet
Measuring Your Head For Your New Stilo ST6 GT 8860-2018 Carbon Fiber Helmet
The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one.
This helmet will ship with signature required for delivery.
Paragon
Paragon Blower Hose Fitting (4")
$30.99
Paragon 4.0" Blower Hose Fitting
Paragon’s 4” Blower Hose Fitting is custom made for connecting the Paragon 1.25” Air Hose to Paragon’s 240 CFM Air Blower.
Sabelt
Sabelt Hero Pro TB-10.1
$499.00
Sabelt Hero Pro TB-10.1
Hey track day titans and racing enthusiasts! Ready to step up your game? Slide into the Sabelt Hero Pro TB-10.1 Racing Shoes – where Italian craftsmanship meets the need for speed. These aren't just shoes; they're a statement of intent every time you hit the track.
SABELT HERO PRO TB 10.1 RACE SHOE FEATURES & BENEFITS
Ultrathin Kangaroo Leather: As sleek as your racing line. This top-quality leather isn't just lightweight; it's like a second skin, ensuring maximum comfort and breathability.
Soft Perforations & Honeycomb 3D Lining: Keep your cool when the heat is on. The perforations and innovative lining ensure your feet stay ventilated, even as the laps pile up.
Super Flexible Strobel Construction: Flexibility at its finest. This construction offers ultimate pedal sensibility, so you feel every shift, every move.
Ultra Flat Outer Sole: Feel the track beneath you. The new ultra-flat sole design enhances your connection with the pedals for precise control.
Removable Carbon Fiber Insole: Step into innovation. The carbon fiber insole, laminated in an autoclave, offers flexibility and a feather-light feel.
Anti-Abrasion Reinforcements: Tougher than your toughest competitor. These reinforcements protect your feet and ensure the shoes last longer than just a few victory laps.
Made in Italy: A touch of Italian flair. Because style matters, even when you're chasing the checkered flag.
SABELT HERO PRO TB 10.1 RACE SHOE SPECIFICATIONS
Material: Kangaroo leather, Honeycomb 3D lining, Natural rubber sole
Closure System: Aramidic laces
Features: Padded ankle and tongue, Removable carbon fiber insole, External reinforcements
Colors: Black, Blue, Red, White
Sizes: 36-48
SABELT HERO PRO TB 10.1 RACE SHOE FAQs:
Q: How do the Sabelt Hero Pro TB-10.1 shoes enhance my driving? A: With their ultra-sensitive soles and lightweight design, these shoes improve your pedal control, making every shift and acceleration more precise.
Q: Are these shoes suitable for long races? A: Absolutely! The breathable design and comfortable construction ensure your feet stay comfortable, even in the most grueling of endurance races.
Ready to take the wheel like a champion? Lace up a pair of Sabelt Hero Pro TB-10.1 Racing Shoes and feel the difference that professional-grade gear makes. Click 'Add to Cart' and step into the winner's circle. Your fastest lap is just a pair of shoes away!
Alpinestars
Alpinestars GP Tech v4 Fire Suit FIA
$1,799.95
Alpinestars GP Tech v4 Race Suit FIA
Hey speedster! Ever dreamt of suiting up in gear that makes you feel invincible on the track? Well, dream no more. Introducing the Alpinestars GP Tech V4 Fire Suit - where cutting-edge technology meets unparalleled comfort.
Alpinestars GP Tech V4 Race Suit Features & Benefits
Exclusive Outer Shell Material: Developed just for Alpinestars, this twill material isn't just about looking sleek. It's about giving you that edge.
Aramidic-Based Knit Lining: Imagine the comfort of your favorite pajamas but with the protection of a knight's armor. That's what this innovative lining offers. Plus, it's lightweight, so you won't feel like you're dragging a chainmail around the track.
Super Breathability: Thanks to the aramidic base lining with its open weave structure, you'll feel the breeze even when you're burning rubber. And with added breathable panels on the side, you'll stay cooler than the other side of the pillow.
Stretchable Panels: Strategically placed at the center back, lower back, elbow, crotch, and knee zone. Because who said you can't be flexible while going full throttle?
Advanced Three-Layer Construction: Ensures breathability, maximum comfort, and effective regulation of body temperature. It's like having a personal AC unit.
Anatomically Engineered Design: Pre-curved arms and legs mean you fit into this suit like a glove. Or, more accurately, it fits you.
Formula 1-Derived Stretch Panels: Located on the lumbar area, elbows, knees, and crotch for that extra oomph in flexibility.
Enhanced Breathability Areas: More ventilation because let's face it, racing is sweaty business.
All-New Extraction Handle: A safety feature straight from Formula 1. Because your safety is our top gear.
Lightweight Knitted Cuffs: For that snug feeling without the weight.
Soft Collar with Knit Fabric: No more scratchy necks. Just pure comfort.
Elastic Waist Construction: Because one size should fit YOU.
Printed Logos: Helps maintain the suit’s integrity and reduces weight. Plus, it looks pretty darn cool.
Premium YKK Metal Zipper: For when you need to get in and out in a flash.
Thigh Pockets: Because where else would you keep your secret racing snacks?
Athletic-Regular Fit Design: Look good. Feel good. Race even better.
Certified to FIA 8856-2018: Because we're all about keeping you safe in style.
ALPINESTARS GP TECH V4 AUTOR RACE SUIT FAQs:
What rating are FIA race suits? They are certified to the FIA 8856-2018 homologation standard.
Are racing suits fireproof? Absolutely! They're designed to protect you from fire hazards on the track.
How long do FIA race suits last? Typically, they have a life span of about 3-5 years, depending on usage.
What does FIA approved mean? It means the suit meets the strict safety and quality standards set by the Fédération Internationale de l'Automobile.
Can you wash a fireproof racing suit? Yes, but always follow the manufacturer's instructions to maintain its integrity.
What is the difference between FIA and SFI? Both are governing bodies that set safety standards, but FIA is international while SFI is primarily US-based.
What should I wear under my race suit? It's recommended to wear fire-resistant undergarments for added protection.
Ready to Unleash the Beast? Don't just be a racer; be a legend. Suit up in the Alpinestars GP Tech V4 Fire Suit and dominate the track.
Alpinestars
Alpinestars Vapor Driver Race Suit
from $549.95
Alpinestars Vapor Driver Racing Suit
The Vapor Suit boasts a soft aramidic exterior, and its triple-layer design is crafted from durable, fire-resistant cotton twill combined with feltro padding, ensuring maximum protection for drivers. For enhanced mobility and comfort, the suit features stretch panels in the crotch, waist, and underarm areas. Its outer shell and lining, made of fire-resistant cotton twill, prioritize driver comfort. Notable design elements include arms and legs that are pre-curved, 3/4 stretchable arm design, and stretch panels on the shoulders. Additionally, the suit has a boot cut leg design with an inner elasticated cuff, further enhancing protection. protection.
ALPINESTARS VAPOR DRIVER RACING SUIT FEATURES
New, three-layer construction Aramid Modacrylic assembly for maximum comfort, excellent resistance, and low weight.
Anatomically engineered, pre-curved arms and legs provide an enhanced fit and an optimum position while driving.
3D Mesh lining for greater breathability.
Aramidic knitted stretch panels on the back, waist, and crotch for ease of movement and enhanced comfort.
Stretch panel construction on backs of shoulders and crotch for improved range of motion and comfort while driving.
Ergonomic collar with soft, knitted lining for extended coverage and maximum comfort.
100% fire-resistant fabric provides high heat and flame-resistant proprieties.
Alpinestars’ all-new Formula 1-derived extraction handle design provides an effective safety feature for the extraction
of the driver in the event of a crash.
Ribbed wrist and ankle cuffs for maximum comfort and reduced weight.
Premium metal double-sided zipper, personalized for a versatile and customizable fit.
Thigh pockets for convenient storage.
Elastic waist construction for belt cinch fit.
Regular fit design.
Certified to SFI 3.2/5 homologation standard.
Stilo
Stilo Carbon Peak Visors ST5 Helmets
$247.00
Stilo ST5 Carbon Peak Visors
Introducing the Stilo ST5 8860 Carbon Peak, the perfect accessory to enhance your racing experience. Designed as an optional extra for FIA8860 ST5 helmets, this peak is FIA approved and offers both style and functionality on the track. Similar to the bill of a ball cap, the ST5 Peak Visor by Stilo is effective at blocking the sunlight from your eyes. The peak visor can be adjusted to the angle of the sun throughout the day. Fitted for the SA2020 Stilo ST5 models, the ST5 peak is the perfect visor for keeping the sun out of your eyes.
Stilo ST5 Peak Visors Details:
Manufacturer: Stilo
Fits Stilo ST5: Yes
Stilo SKU YA0862 Gloss Carbon Fiber (FIA 8859 weave)
Stilo SKU YA0863 Gloss Carbon Fiber (FIA 8860 weave)
Chillout Systems
Chillout Systems 3" Air Duct Plenum
$48.00
Chillout Systems 3" Air Duct Plenum
Chillout Motorsports 3" Air Duct Plenum connects to your Cooling System, efficiently increasing cooling performance whilst simultaneously reducing amp draw from your electrical system.
The plenum is designed to fit the intake side of your Quantum Cooler, allowing for much cooler air to be forced through the system via the 3" duct. A 200 CFM blower (Minimum) is required in conjunction with the plenum for the best performance.The 3" Air Duct Plenum attaches via the plenum holder found on the front of the Quantum Cooler systems (V2 and above), creating a seal to keep the cooler pressurized with the cool air. Forcing cool air through the system and out through the exhaust side of the cooler is the most efficient way to reach maximum cooling - no wasted cool air, and the cooling shirt system appreciates every bit of cool air it can get.INCLUDED WITH THE CHILLOUT 3" PLENUM
3" Air Duct Plenum
Chillout Systems
Chillout Systems No Drip 1/4" Shirt Adapters
$105.00
Chillout Systems No Drip 1/4" Shirt Adapters
No Drip Adapters from Chillout Systems are designed to never leak and maximize the reliability of your driver cooling unit without the annoying "drip" when you disconnect.
Chillout Systems No Drip 1/4" Shirt Adapter Details
Manufacturer: ChillOut Systems
Manufacturer Part Number: CO-DLC-1
Works with other ¼" cooling shirts: Yes
Quantity: 4 Pieces (2 complete sets)
We have found in very long endurance races such as the World Racing league 24 Hours of Sebring, multiple driver changes have parasitic loss of fluid during the repetitious connecting of the drivers shirts. No Drip adapters also prevent unintentional release as the Shirt Adapters lock together, linking the hose to your system securely.
Sparco
Sparco RW-4 Nomex Balaclava
$79.00
Sparco RW-4 Nomex Balaclava
The RW-4 line of undergarments are designed to provide both comfort and protection. The RW-4 features a soft-touch interlock fabric. The hoods are one size fits all The RW-4 line is FIA 8856-2018 approved.SPARCO RW-4 NOMEX BALACALVA TECHNOLOGYSoft and comfortableRegular FitFIA 8856-2018 Approved
Racing Optics
Racing Optics (X-Stack) - Bell 287 SRV, SRV-8 and Roux R-1 Helmets
$36.95
Racing Optics (X-Stack) - Bell 287 SRV and Roux R-1 Helmet Shields
Racing Optics has the most optically advanced tearoff technology. 10 layer "distortion free" laminated tearoff system for the Bell 287, SRV-8 and Roux R-1 helmets. Protect your Bell or Roux Helmet shield from rocks, dirt, and debris and extend the life of your shield by drastically reducing pitting and scratches.
Racing Optics (X-Stack) - Bell 287 SRV and Roux R-1 Helmets Details:
Qty in one stack: 10
Thickness: 2 mil
Stacks in one package: 3
Post centers: 12 1/8"
Shape: Banana
Racing Optics (X-Stack) - Bell 287 SRV and Roux R-1 Helmets Fitment Guide:
Fits Bell:
Bell 287 SRV Shields
Bell GTX.2 Helmets
Bell GP.2 Helmets
Bell Star Infusion Helmets
Bell Dominator.2 Helmets
Bell M.8 Composite SA2015/SA2020
Bell M.8 Carbon SA2015/SA2020
Fits Roux:
R-1 Fiberglass
R-1 Composite
R-1 Gloss Carbon
R-1 Matte Carbon
Racing Optics is a laminated tear off solution for dirt and pavement forms of racing eliminating the need to apply individual tear offs. Racing Optics has the most optically advanced tearoff technology. 10 layer "distortion free" laminated tearoff system for the Bell 287 SRV and Roux R-1 shields. Protect your Bell and Roux Helmet shield from rocks, dirt, and debris and extend the life of your shield by drastically reducing pitting and scratches. For racers who prefer thinner tear offs, Racing Optics is available in X Stack (10 per stack) 2 mil with patterns specific to Bell Helmets including the GTX.2, GP.2, Star Infusion, Dominator.2, and all Roux R-1 helmets. Each sleeve comes with three stacks of 10 Racing Optics. (total of 30)
FluidLogic
FluidLogic Hydro Helmet Side Kit
$149.95
FluidLogic Hydro Helmet Side Kit
The FluidLogic Hydro Helmet Side Kit gives you everything you need to fully outfit your helmet for use with the latest FluidLogic Hydro hydration system. Built for serious racers, it delivers clean, efficient hydration without interfering with comfort or communication.
Complete Hydro System Connection Kit
This kit connects your helmet to the updated FluidLogic Hydro system and includes:
Helmet-side Hydro magnetic connector
Aquacom Pro (small silicone mic sleeve)
Aquacom Baja (large silicone mic sleeve)
Durable 4mm hydration tubing
Important Compatibility Notice
The FluidLogic Hydro and older Flush 360 systems are not cross-compatible. The Hydro features a redesigned hose-side connector and relocated check valve, making it incompatible with previous-generation helmet-side hardware. Mixing components between systems will result in connection issues, water delivery failures, or accidental leaks.
Additionally, AquaCom sleeves have changed and will not fit Flush 360 components. Always confirm which system—Flush 360 or Hydro—you’re using before installing or replacing parts.
Key Details
Exclusively for use with the FluidLogic Hydro system
Includes both mic sleeve sizes for versatile fitment
Upgraded design with helmet-side check valve integration
This helmet-side kit is a critical component for anyone using the new Hydro hydration system. For peak performance and reliability, make sure all components match the correct generation.
Alpinestars
Alpinestars Stella GP Pro Comp v2 Women's Driver Race Suit
$1,199.95
Alpinestars Stella GP Pro Comp v2 Women's Driver Race Suit
The Stella GP Pro Comp v2 race suit for women features an outer shell material developed exclusively for Alpinestars which is combined with a soft aramidic base knit lining for optimum levels of comfort, protection, and light weight. Thanks to the introduction of this aramidic base lining, with its open-weave structure, the Stella GP Pro Comp v2 race suit delivers excellent breathability, which is further reinforced by strategically-positioned knitted, stretchable open mesh panels on the back, crotch, and armholes for additional airflow and flexibility both in and out of the car.
The Alpinestars Stella GP Pro Comp v2 race suit also incorporates innovative silicon grip technology applied to the shoulders and lower back to prevent any movement within your racing seat. This also helps keep your HANS device in place and helps reduce pressure on the shoulders.
ALPINESTARS STELLA GP PRO COMP V2 RACE SUIT DETAILS
Certified to the latest FIA 8856-2018 homologation standard
Female anatomical torso, leg, and arm paneling is patterned for optimum driving position fit
Lightweight, breathable multi-layer suit incorporating mesh stretch panels for maximum comfort and effective body temperature regulation
Innovative silicon grip detailing on shoulders and lower back to provide better feel from the racing seat and connection to the HANS device
Strategically positioned Formula One derived stretch mesh panels on the lower back and crotch for enhanced flexibility
ALPINESTARS STELLA GP PRO COMP V2 RACE SUIT CONSTRUCTION
Alpinestars fully-floating arm construction with stretchable knit fabric ensures minimal material resistance while driving
100% aramidic antistatic outer shell fabric for exceptional heat- and flame-resistance
Ribbed wrist and ankle cuffs for maximum comfort
Tall ribbed collar extends coverage of the neck and improves driver comfort
Alpinestars exclusive shoulder epaulette construction provides for the extraction of the driver in the event of a crash
Premium YKK metal zipper with double sliders
Thigh pockets for convenient, unobtrusive storage
"ALPINESTARS PROTECTS" slogan on the lower back of the lining, as used on Alpinestars F1 racing suits
Comes with a laundry bag for convenience and effective material fiber protection
Athletic/regular fit
Weight 345 g/m2
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Sparco
Sparco Shield Tech Nomex Underlayer Shirt
$199.00
$299.00
Sparco Shield Tech Nomex Shirt
The Shield Tech line of Nomex undergarments provides the highest level of protection and technology for comfort and breathability. The Shield Tech is homologated to the newest FIA standard 8856-2018 which provides the highest fire protection. When designing this new line of undergarments, Sparco studied the drivers seating position to ensure ultimate fit and comfort. Strategic weaving of the material produces increased breathability along with articulation.
Shield Tech uses a seamless construction with ultra-soft stretchable material. There are two different woven materials in key areas; thin stretch for comfort and mobility as well as a double perforated panels for increased breathability. The minimal seams are stitched flat with thin specialized thread for added comfort.
All Shield Tech pieces are treated with Sparco’s X-Cool treatment, which draws heat from the body surface to cool the driver. In addition to cooling the driver, X-Cool treatment has an anti-bacterial effect.
SPARCO SHIELD TECH UNDERLAYER TECHNOLOGY
Newest FIA rating, FIA 8856-2021
Seamless stretchable Nomex in key areas for mobility
Perforated knit in key areas for breathability
Designed for comfort in a driving position
Minimal external seams increase driver comfort
X-Cool Silver draws heat from the skin to cool the driver
X-Cool Silver has anti-bacterial effect
Stilo
Stilo ST5 Side Air Adapter Hose
$49.95
Stilo ST5 Side Air Adapter Hose
Fresh air keeps you cool and keeps sweat from going into your eyes as you take the checkered flag. Endurance racers keep their focus high and lap times low by staying in the cool zone.
This adapter hose allows you to connect a standard forced-air hose, typically used for top-air connections, to the side air connector on your Stilo helmet.
MUST BE USED IN CONJUCTION WITH SIDE AIR KIT YA0653.
Chillout Systems
Chillout Systems Insulated Coolant Y-Hose (14ft)
$179.00
Chillout Systems Insulated Coolant Y-Hose
The Chillout Systems Insulated Coolant Y-Hose is made of insulated liquid-transfer tubes encased in an ultra-durable, tear-resistant fabric shield.
The primary end of the hose is 10 feet long, branching off into dual 4-foot hose ends that enable two cooling garments to be connected to one driver cooling unit with 1/4" fittings.
Hose too long for your set-up? It's easy to cut the hose to desired length and re-attach the end fittings. Chillout hoses comes with an extra supply of matching shrink wrap for a flawless, clean, and durable finish.
CHILLOUT SYSTEMS INSULATED COOLANT Y-HOSE DETAILS
Manufacturer: Chillout Systems
Manufacturer part no.: HYA-1
Double-insulation: one layer protects hoses and insulation, the other keeps coolant cold
Length: 14-feet overall
Male connectors: four
Female Dual-Prong connector: one
Additional heat shrink tubing for custom sizing while maintaining a finished look
Can be connected to other hoses including another Y-connector
