New products

Stilo to RACEceiver Adapter Cable Stilo Helmet Adapter to go to RACEceiver. Genuine TracCom Stilo to RACEceiver helmet adapter for clear communication for your RACEceiver to your wired Stilo. This is the Stilo to RACEceiver Adapter Cable. Stilo to RACEceiver Adapter Cable Details: Manufacturer: RaceCom Manufacturer part number: R AD STLO2RCVR12 Cable end #1: Male Stilo Cable end #2: Male RACEceiver Cord style: Straight 

Red Line Water Wetter Red Line Water Wetter doubles the wetting ability of water in your race car's cooling system. Red Line has created a special performance agent that lowers temperatures by reducing or completely eleminating bubbles or even the vapor barier that forms on hot metal surfaces.   Red Line Water Wetter Details: Manufacturer: Red Line Manufacturer part number: 80204 Size: 12oz Unique agent for cooling systems that doubles the wetting ability of water Rust and corrosion protection allows for use of straight water in racing or reduced antifreeze levels in warm climates Improves heat transfer and reduces cylinder head temperature May allow more spark advance for increase power and efficiency Use one bottle for most passenger cars and light trucks, treats 3 to 5 gallons or 13.2 to 15.9 liters. Vehicles with larger cooling systems should use two bottles. Small cooling systems should use 1oz (3 to 4 capfuls) per quart Compatible with new or used antifreeze (including DEX-COOLTM and long-life versions) to improve the heat transfer of ethylene and propylene glycol systems Satisfies ASTM D2570 and ASTM D1384 corrosion tests for glycol-based antifreezes Reduces or eliminates bubbles or vapor barrier that form on hot metal surfaces to reduce coolant temperatures by up to 20° Superior heat transfer properties compared to glycol-based antifreeze Compatible with new or used antifreeze (including DEX-COOL and long-life versions) to improve the heat transfer of ethylene and propylene glycol systems Improves heat transfer and reduces cylinder head temperature Designed for use with all modern aluminum, cast iron, copper, brass and bronze cooling systems Cleans and lubricates water pump seals Reduces cavitation and complexes with hard water to reduce scaling Does not lower cooling system below the thermostatically-controlled temperature One 12 oz Bottle does most cars. Rear engine/front radiator vehicles (Porsche) will use 2 bottles. Go-Karts use 1 bottle per 5 years.

Sparco RW-7 Nomex Fireproof Shirt   The RW-7 line of undergarments are designed to provide both comfort and protection. The RW-7 is made from a unique mixture of very comfortable soft fibers. The undershirts are made with seamless sides with raglan sleeves to enhance comfort.  The Sparco RW-7 line of underlayers includes long-sleeved shirts, long pants, a balaclava (hood) and mid-calve socks. The hoods are one size fits all; shirts and pants are available in a large range of sizes. The RW-7 shirts and pants are designed to fit close to the body due to the soft stretchable fabric. If you prefer a loose-fit please choose one size up. RW-7 shirts and pants are treated with Sparco’s X-Cool treatment, which draws heat from the body surface to cool the driver. In addition to cooling the driver, X-Cool treatment has an anti-bacterial effect. The RW-7 line is FIA 8856-2018 homologated.SPARCO RW-7 UNDERLAYER TECHNOLOGYNewest FIA rating - FIA 8856-2018Seamless stretchable Nomex in key areas for mobilityDesigned for comfort in a driving positionMinimal external seams increase driver comfort

Sparco RW-4 Nomex Fireproof Shirt   The entry-level RW-4 line of undergarments are designed to provide both comfort and protection at a reasonable price. The RW-4 features a soft-touch interlock fabric. The RW-4 undershirts and underpants are regular fit. RW-4 line is FIA 8856-2018 approved. SPARCO RW-4 NOMEX UNDERLAYER SHIRT TECHNOLOGY Soft and comfortable Regular Fit FIA 8856-2018 Approved

AiM Memory Module for AiM Devices Use SD memory cards1 effortlessly to keep your driver data more organized. This unit allows you to easily swap memory cards in and out to view driver data more efficiently between stints. Using the AiM Memory Module is really simple: just connect the Module to your device and data will be saved simultaneously both in the data-logger and on the SD card. No configuration is needed. The SD card can be removed and replaced even during pit stops, while the car engine is still on, making it extremely fast to get data during endurance races or long tests, when the time in the paddock is really limited. When the session is over, all you need to do is move the SD card from the AiM Memory Module to your PC and download the data using RaceStudio 3. The Module features a front LED showing its recording/updating status. The AiM Memory Module can support up to 32GB SD cards. AiM MEMORY MODULE FOR AiM DEVICES DETAILS Manufacturer: AiM Sports Manufacturer part no: X08MMD040 Cable length: 40cm (16 in.) SD card 1: up to 32GB Power consumption: 50 mA Dimensions: 55.5 x 78.3 x 18mm (2.2 x 3.1 x 0.7 in.) Weight: 103g (3.5 oz.) Waterproof: IP65 CONNECTS VIA CAN BUS TO THESE AiM DEVICES MXL2 MXG (1st gen) MXS (1st gen) EVO4S EVO5S MXT 1.3 MXG 1.3 MXP 1.3 MXS 1.3 PDM08 PDM32 1 SD card is not included

Chillout Systems 3" Air Duct Plenum Chillout Motorsports 3" Air Duct Plenum connects to your Cooling System, efficiently increasing cooling performance whilst simultaneously reducing amp draw from your electrical system. The plenum is designed to fit the intake side of your Quantum Cooler, allowing for much cooler air to be forced through the system via the 3" duct. A 200 CFM blower (Minimum) is required in conjunction with the plenum for the best performance.The 3" Air Duct Plenum attaches via the plenum holder found on the front of the Quantum Cooler systems (V2 and above), creating a seal to keep the cooler pressurized with the cool air. Forcing cool air through the system and out through the exhaust side of the cooler is the most efficient way to reach maximum cooling - no wasted cool air, and the cooling shirt system appreciates every bit of cool air it can get.INCLUDED WITH THE CHILLOUT 3" PLENUM 3" Air Duct Plenum

ISC Non-Skid Racers Tape ISC Non-Skid Racers Tape is the quickest and easiest way to prevent slipping and falling with its instant, self adhesive, and anti-slip safety surface. Each 2" x 10 ft. roll is made from a heavy-duty, long lasting material that is impervious to all weather conditions. ISC Non-Skid Racers Tape will endure temperature extremes of -40º F to 220º F. There are no messy glues or additional adhesives to gum up the works. Just peel off the backing and apply ISC Non-Skid Racers Tape to any clean, dry surface. Especially great for race trailer ramps and stairs, truck tailgates, brake and clutch pedals, and floor boards. Sparkling black finish.

Alpinestars Tempest V2 Waterproof Karting Gloves Dominate the Wet with Confidence and Control Alpinestars Tempest V2 Waterproof Karting Gloves give kart racers the grip, response, and comfort they need to perform at their best. Built to handle the rigors of competition, they deliver control and style in every lap. Featuring a fully waterproof membrane and fleece-lined interior, the Tempest V2 provides excellent insulation without compromising grip or dexterity. The synthetic suede palm with silicone print enhances control on wet steering wheels, while the extended cuff and elastic wrist ensure a snug fit that seals out water. Lightweight, breathable, and CIK-FIA Level 2 homologated, the Tempest V2 is trusted by serious drivers who refuse to let the weather slow them down. Alpinestars Tempest V2 Waterproof Karting Glove Highlights CIK-FIA Level 2 homologated waterproof kart gloves for competitive racing Waterproof membrane and fleece lining for warmth and dryness in the rain Silicone-printed synthetic suede palm for enhanced grip on wet steering wheels Pre-curved construction for reduced fatigue and increased control Extended cuff and elastic wrist closure for a secure, sealed fit The Alpinestars Tempest is a versatile, wet weather glove featuring a full fleece lining and water-resistant main construction. An advanced rubber composite palm offers excellent grip and control for those blustery days on the kart track. Alpinestars Tempest V2 Waterproof Karting Glove Size Chart Alpinestars Tempest V2 Waterproof Karting Glove FAQs Q: Are the Tempest V2 gloves waterproof? A: Yes, they feature a fully integrated waterproof membrane to keep your hands dry during wet karting sessions. Q: Are they FIA certified?A: Yes, the Tempest V2 is CIK-FIA Level 2 approved, making it legal for use in most national and international karting competitions. Q: Do these gloves keep your hands warm?A: Absolutely. They’re fleece-lined for insulation, making them ideal for cold and wet racing conditions. Q: How’s the grip in wet conditions?A: Excellent. The synthetic suede palm with silicone printing provides superior grip and steering control even in heavy rain. Q: Are they bulky due to the waterproofing?A: Not at all. The design balances insulation and dexterity, allowing for great feel without added bulk. Q: Do they have a secure closure system?A: Yes, the gloves feature an elastic wrist and extended cuff, ensuring a snug, sealed fit to keep water out. Q: Can these gloves be used in dry conditions too?A: They can be, but the Tempest V2 is optimized for wet-weather performance—for dry racing, consider Alpinestars’ Tech-1 K v3 gloves.

Stilo ST5 Shield and Peak Pivot Kit The Stilo ST5 Shield and Peak Pivot Kit allows a Stilo Peak Visor and Shield to be used together on all ST5 helmets. The visor will have to be able to open and close and the peak visor can be adjusted to the perfect angle to keep the sun out of your eyes. Stilo has a reputation for excellence and the ST5 peak and visor kit will not disappoint. Remember, if you are using a shield in combination with a visor, ( Stilo ST5 Short Sun Visor or other visors of your choice ) it is recommended that you order this kit for the visor and shield to all go on a Stilo helmet.  Stilo ST5 Shield and Peak Pivot Kit Manufacturer: Stilo Manufacturer part number: YA0864 Fitment: Stilo ST5 versions

CMS Performance Bolt In Roll Bar For BMW E92 M3 (2008-13) A PREMIUM BOLT-IN ROLL BAR FOR THE LEGENDARY E92 The CMS Performance Roll Bar is the strongest, safest, most beautifully constructed bolt-in roll bar on the market for the BMW E92 M3. It is engineered to easily bolt into any E92 variant, providing you with both the rollover protection of a super-strong roll bar and the beauty and craftsmanship for which CMS Performance is renowned. Engineered with a premium on safety and structural rigidity, the exceptional design integrates perfectly with the M3's luxury/sport interior. CMS uses only advanced Docol R8 Advanced High-Strength Steel tubing throughout each roll bar, giving you unequalled tensile strength and occupant protection. Docol R8 is 15% stronger than 4130 CrMo steel and 30% stronger than mild (DOM) steel used by other roll bar manufacturers. It is superior in every way: resistance to deformation, weld strength, and energy dissipation. Our one-piece main hoop with fully-integrated X-bracing and harness bar bolts directly to the chassis, forming the backbone of the CMS Performance Roll Bar. Rearward "kicker" supports are optimized for support and easy installation while maintaining an unobstructed rear view. The harness bar is specifically designed to locate racing harness shoulder straps at the proper angle (0° to -20°) in most seating positions. CUTTING EDGE MATERIALS & DIRECT BOLT-IN Click Here for Installation Instructions The CMS Performance BMW E92 M3 Roll Bar is designed to bolt directly to the M3 chassis' strong points without the need for any modification of existing interior trim or use of backing plates. Adding a CMS custom designed rear seat delete gives the whole installation a clean, factory appearance. Full 360o TIG welding throughout gives the CMS Performance Roll Bar unsurpassed strength and durability. Each roll bar includes custom powder coating in your choice of matched M3 factory colors1, satin black for a more stealthy appearance, or any of over 5,000 custom powder coat colors for a truly customized look. Our unwavering focus on using cutting-edge materials, unsurpassed design & construction, and premium fit & finish has taken CMS Performance Roll Bars to the top of the industry. The BMW E92 M3 roll bar is the latest addition to our growing catalog, bringing safety, integrity, and beauty to your M3 whether on the street or at the track! CMS PERFORMANCE BMW E92 M3 ROLL BAR OPTIONS Main hoop X-brace gussets (as shown in photos) can be added for $200. Schroth Profi II ASM four-point harnesses have a patented anti-submarine design to give you racing harness safety with your factory BMW seats. Roll Bar Harness Collars help keep your shoulder straps where you want them. CMS PERFORMANCE BMW E92 M3 ROLL BAR DETAILS 1.75″ X .090" Docol R8 Advanced High Strength Steel throughout (stronger than 4130 CrMo) One-piece main hoop for superior strength and occupant safety Three-piece kickers ease installation while maintaining exceptional strength Precision-cut mounting plates Designed and TIG welded in the USA by master racing fabricators CNC machined high-strength-steel interlocking joints Allows full seat travel with virtually any seat All USA-made Grade 8 hardware included Comes with detailed installation instructions Installation requires removal of the factory rear seat bottom cushion. This product is intended for off-road use only. 1 Note: CMS Performance powder coat colors are professionally matched to be as close as possible to factory paint codes. However, color-matching powder is not the same as mixing liquid paint. In a few cases, slight color variance is normal and is not perceptible with the roll bar installed inside the car.

Sparco RW-10 Seamless Nomex Balaclava The Sparco RW-10 line of Nomex® undergarments is the lightest and most breathable on the market that is homologated to the new FIA 8856-2018 standard. When designing this new line of undergarments, Sparco studied the drivers seating position to ensure ultimate fit and comfort. The RW-10 features a fully seamless structure with ultra-soft stretchable material for a very comfortable fit.    The RW-10 balaclava is seamless, designed with no seams across the mouth and chin area for comfort when wearing a helmet. The traditional center seam across the front of the forehead has been removed to lessen any chances of pressure when wearing a helmet. SPARCO RW-10 SEAMLESS NOMEX BALACLAVA TECHNOLOGY FIA rating - FIA 8856-2018 Seamless stretchable Nomex in key areas for mobility Designed for comfort in a driving position Minimal external seams increase driver comfort

Sparco Victory Driver Race Suit FIA 8856-2018 The lightweight and breathable Sparco Victory 2023 racing suit is feature packed with lightweight HOCOTEX® fabric construction, comfort stretch panels, and is dual SFI 3.2A/5 and FIA 8856-2018 homologated. Built in Italy with pride, the new lightweight and breathable Sparco Victory race suit brings the performance of competitor's suits that are double the price to weekend racers. It's hard to improve on a classic, but Sparco has done just that with the updated Victory racing suit! Built from the popular Victory racing suit that brought HOCOTEX® technology to this price point. Largely keeping the popular Victory classic design with modern color options, the new Victory race suit takes things a step further with an improved cut, style, and fit. An improved stretch panel on the lower-back further improves mobility, while preformed sleeves maintain excellent steering performance. Sparco's unique HOCOTEX® technology makes use of an intricate honeycomb structure that contains thousands of protective microcapsules built into a super-thin and breathable fabric weave. Twice as breathable as other entry-level suits, these insulating compartments replace the multi-layer fabric construction found in every other suit on the market, all while maintaining dual SFI 3.2A/5 and FIA 8856-2018 certifications for zero compromises in protection! SPARCO VICTORY RACE SUIT DETAILS FIA 8856-2018 and SFI 3.2A/5 homologated Soft, lightweight, and twice as breathable as a standard multi-layer suit Single-layer comfort with multi-layer protection Hidden front pockets Fully-floating pre-formed sleeves with stretch panels Additional stretch gusset in the shoulders and armpits Three years of research and development HOCOTEX® patented Sparco technology Made in Italy The only single-layer SFI 3.2A/5 suit on the market

Stilo ST5 Breath Deflector Anti-Fog Kit Fitting all ST5 helmets, the Stilo ST5 anti-fog breath deflector kit uses four special components to bring visor fog to a standstill. Your Stilo ST5 helmet - be it an ST5 Composite, Offshore, Carbon, Carbon 8860 or the DiscoveryParts favorite, the Carbon 8860 Zero - came to you with a special anti-fog coating on the visor. By combining the Stilo YA0873 anti-fog breath deflector kit with your specially coated Stilo shield, your best vision is ahead. The four components included in the Stilo YA0873 kit perfectly match your Stilo ST5 chin pad to stop air from coming in through the front air vents. The specially shaped front pad is attached to the inside of your chin pad with a little "lip" of extra material to go between your upper lip and nose. This fire resistant fabric flap with the three vent plugs are a perfect addition to our Stilo accessory department. Stilo ST5 Breath Deflector Anti-Fog Kit Details: Manufacturer: Stilo Manufacturer part number: YA0873 Fits all Stilo ST5 helmets: Yes Fits Stilo ST4 Helmets: No

Alpinestars Tech-1 K YOUTH Karting Shoes Sizes 1 and 12.5 Youth Only!  An aggressively-styled driving shoe specifically developed for youth drivers, the Tech-1 KS is constructed from a lightweight microfiber and 3D mesh inserts for high levels of comfort, durability and breathability. Performance includes include an innovative rounded heel for support and Alpinestars exclusive rubber compound sole for improved pedal sensitivity and grip. ALPINESTARS TECH1-K YOUTH KART SHOE FEATURES Light and durable advanced microfiber and mesh construction offers excellent comfort and feel. 3D mesh inserts on the tongue and perforated microfiber panels on the heel and sides offer excellent ventilation. Innovative heel counter and lateral forefoot structure offers support and stability. Traditional symmetric lace closure system and hook-and-loop strap grip offers safe and secure fitting. Padded sole incorporates improved Alpinestars exclusive rubber compound for improved pedal sensitivity and grip in all conditions. sleek shoe profile follows foot anatomy and guarantees great fit and performance  ALPINESTARS TECH1-K YOUTH KART SHOE CONSTRUCTION Designed and developed specifically for the stresses of kart racing Designed and constructed especially for young drivers, incorporating aggressive styling External heel, ankle and internal toe reinforcements for abrasion resistance and protection ALPINESTARS TECH1-K YOUTH KART SHOE SIZE CHART