CoolShirt and ChillOut Systems Small Parts

Fittings & Parts

A Driver Cooling system is both simple and complex at the same time. Basically, the process of the cooling system entails compressing and circulating cold water through some fittings, hoses, and a shirt. With all the correct pieces working together in unison, the system is a breeze - or at least will make you think it is one. On this page, you will find all the pieces to repair, build, or improve your CoolShirt or other driver cooling system. 

CoolShirt 19 Qt Mounting Tray with Strap
In Stock
Make An Easy Install Of Your CoolShirt 19 quart Cooler Into Your Race Car With The CoolShirt 19 Quart Mounting Tray With Strap. This is a powder-coated aluminum mount tray with strap.  Facilitates easy cooler removal between sessions and after a long race weekend. 
$92.00
CoolShirt FC-1 Temperature Control Switch
Last items in stock
This CoolShirt FC-1 switch is designed to allow control of the on pulse (12vdc+) to make your your CoolShirt system last longer in duration and allow for better temperature controll. The CoolShirt 4300-0001 is usually installed in sprint and enduro race cars with the 13qt or 19qt club systems. An additional use we see is the CoolShirt FC-1 temperature control switch for a CoolShirt helmet blower
$245.00
CoolShirt Maintenance Additive Solution - 16oz.
In Stock
Remove Fungus From Your CoolShirt Shirt With This Non-toxic Bio-Degradable Solution. Keep the lines clean and flowing well with CoolShirt MA-16 Maintenance Additive.
$11.00
CoolShirt O Ring Kit - 6 Pieces
In Stock
CoolShirt Replacement O Ring Kit Replaces the O-Ring on the male end of your CoolShirt Shirt or CoolShirt Insulated Water Hose.
$8.00
CoolShirt Replacement Rechargeable Lithium-Ion Battery
Last items in stock
CoolShirt Lithium-Ion battery can run your CoolShirt battery powered cooler for up to 7 hours. Most racers keep a spare battery to keep one in the unit and one on the charger ready to go. When you have a CoolShirt portable system it is not uncommon to see drivers in their transporter "cooling down" between sessions or in a lawn chair in their pit stall. 
$153.00
CoolShirt Safety Pull Release Connectors Female(Pair)
In Stock
Providing Immediate Release From Your Cooling Unit. Emergency Safety Pull Release Connectors By CoolShirt release under pressure. No wasting valuable seconds trying to locate and release normal release buttons.
$42.00
CoolShirt UK-8 Universal Safety Connector Drain Kit
In Stock
Now You Have Replacement Coolshirt Ends For Any Emergency With The CoolShirt UK-8 Universal Connector Kit featuring the Red Button safety-pull connectors that break free with 6 lbs of pulling force. 
$94.00
CoolShirt 120V Battery Wall Charger
In Stock
This CoolShirt replacement battery charger is a direct replacement for the CoolShirt battery charger that is included with all battery powered CoolShirt coolers. Easy to connect to your CoolShirt battery, use this 120v wall charger to keep your CoolShirt Battery fully charged.
$59.00
CoolShirt Endurance Ice - 32 oz.
CoolShirt 32oz Endurance Ice, the larger of the two sizes, are the ultimate in refrigerant cold packs to keep enduro drivers focused and cool. 
$6.00
CoolShirt Endurance Ice - 3 oz.
CoolShirt 3oz Endurance Ice, the smaller of the two sizes, is the ultimate in refrigerant cold packs to keep enduro drivers focused and cool. 
$4.00
CoolShirt 13 Qt Mounting Tray with Straps
In Stock
Make An Easy Install Of Your CoolShirt 13 quart Cooler Into Your Race Car With The CoolShirt 13 Quart Mounting Tray With Strap. This is a powder-coated aluminum mount tray with strap.  Facilitates easy cooler removal between sessions and after a long race weekend. 
$86.00
CoolShirt Thermal Pad - Between Mount Tray & Cooler
In Stock
CoolShirt thermal pad is designed to fit perfectly into the bottom of your CoolShirt mount trays to insulate your coolers from the hottest part of your car, the floor pan. Weighing in at just over 3 ounces, the thermal pad is the perfect companion to your tray to keep your cooler secure and the ice remain frozen longer.
CoolShirt Replacement Female Connector
In Stock
CoolShirt Replacement Female End For Shirt Or Water Hose. Did You Slam The Door on your CoolShirt water hose? This is the female shirt connector to use. 
$9.00
CoolShirt Bulk Head Fitting for Cooler
Last items in stock
CoolShirt Bulk Head Fitting (Female) is a direct replacement for the fitting that came with your cooler but has since worn out or become damaged.
$16.00
CoolShirt Mounting Tray Strap
In Stock
CoolShirt replacement mounting tray black velcro strap is what is attached to your CoolShirt mount tray from the factory. If your CoolShirt mount tray straps are worn or abraded, then the replacement mount tray straps will get you back to lightning quick cooler changes. Fitting both 13 quart and 19 quart mount trays, in heavy duty black fabric with velcro closure, these mount straps last years. 
$14.00
ChillOut Systems Coolant Formula - 1.5L
In Stock
Non-toxic and biodegradable coolant that circulates through cooler and cooling garments, keeping you cool and your machine running in prime condition.  
$28.00
ChillOut Systems Wiring Harness
Last items in stock
Replacement ChillOut Systems 10' power harness. Your ChillOut Systems Quantum Cooler is easily removed and installed in multiple vehicles thanks to the ingenious cooler base plate system. This additional power harness is trimable from it's full 10' length to your exact requirment.
$65.00
Universal Accessory Plug 12V, 5A, w/ LED Pilot Light
Use This Universal Cigarette Lighter Adapter Plug to Power Your CoolShirt System or any accessory using 5 amps or less. Built in LED light instantly lets you know your supply power is good so you are ready to take the track. 
$6.99
CoolShirt Maintenance Additive Solution - Case
Remove Fungus From Your CoolShirt Shirt With This Non-Toxic Bio-Degradable Solution. Keep the lines clean and flowing well with CoolShirt MA-16 Maintenance Additive. Case quantity. (12 16oz bottles)
$132.00
CoolShirt Replacement Cooler Pump
This is a genuine CoolShirt replacement pump used in modern CoolShirt hard coolers. If you have a CoolShirt 13qt or 19qt hard sided cooler, this is the CoolShirt replacement pump you need.
$99.00
ChillOut Systems Cooler Base Plate
Engineered to keep your cooler steadily mounted no matter how hard you drive. The cooler base plate doubles as insulation between your cooler and your car for noise cancellation and acts as a barrier between your chilled driver cooling unit and your hot floor pan.
$45.00
ChillOut Systems Dash-Mountable Wired Remote Control
The Quantum Cooler dash-mountable wired remote control features an 18ft. rubber power cord, easy adjustable digital temperature display and easy-touch power button. This is a great addition if you are mounting your Quantum Cooler in an out of reach area in your vehicle like the trunk or rear seat area.
$130.00
ChillOut Systems Dual Prong Connector
Designed to withstand wear, these military-grade cooling adapters improve the reliability of the Quantum Cooler by latching securely and enabling the coolant formula to cycle through the system with no leakage.
$25.00
ChillOut Systems AC Power Supply
Shock-resistant external AC power supply enables cooling outside of your vehicle. This power adapter plugs into the wall and supports 110-220 volts.
$160.00
ChillOut Systems Single Tube Connectors (Pair)
Designed to withstand wear, these military-grade cooling adapters improve the reliability of the Quantum Cooler by latching securely and enabling the coolant formula to cycle through the system with no leakage.
$25.00
ChillOut Systems Ultralight 100% Carbon Fiber Base Plate
Engineered to keep your cooler steadily mounted no matter how hard you drive. The cooler base plate doubles as insulation between your cooler and your car for noise cancellation and acts as a barrier between your chilled driver cooling unit and your hot floor pan.
$130.00
ChillOut Systems 4-Inch Carbon Fiber Air Plenum
Forcing fresh air to your cooler is the most efficient way to increase cooling performance and reduce amp draw from your electrical system. This plenum fits perfectly to cover the intake side of your Quantum Cooler and allows much cooler air to be forced through the system via a 4 inch duct. This 4" inlet generally allows enough airflow to eliminate the need for an in-line blower.
$205.00
ChillOut Systems Wired Remote Control for Quantum Pro
The Quantum Pro Cooler dash-mountable wired remote control features a 10ft. rubber power cord, full-color digital display, and easy-touch power button. This is a great addition if you are mounting your Quantum Pro Cooler in an out of reach area in your vehicle like the trunk or rear seat area.
$225.00
ChillOut Systems Quantum Pro Ultralight 100% Carbon Fiber Base Plate
Engineered to keep your cooler steadily mounted no matter how hard you drive. The cooler base plate doubles as insulation between your cooler and your car for noise cancellation and acts as a barrier between your chilled driver cooling unit and your hot floor pan.
$150.00