Brakes by Vehicle

BMW Racing Brakes

Camaro Racing Brakes

Corvette Racing Brakes

Ferrari Racing Brakes

Ford Racing Brakes

GM Racing Brakes

Honda S2000 Racing Brakes

Lamborghini Racing Brakes

McLaren Racing Brakes

Mercedes Racing Brakes

Mitsubishi Racing Brakes

Lotus Racing Brakes

Camaro Racing Brakes

Nissan Racing Brakes

Porsche Racing Brakes

Subaru Racing Brakes

Toyota / Lexus Racing Brakes

Volkswagen Racing Brakes

Image of Ferodo FCP1348W DS1.11 Camaro Z28, ZL1 & 1LE Rear Brake Pads

Ferodo Ferodo FCP1348W DS1.11 Camaro Z28, ZL1 & 1LE Rear Brake Pads $497.83

Ferodo FCP1348W DS1.11 Camaro Z28-ZL1 Rear Brake Pads Fitting the Camaro SS, Z28, ZL1 and 1LE the Ferodo FCP1348W-N racing brake pad in the DS1.11 compound is a long duration endurance race pad that is also used in the Red Group of advanced track day drivers. Featuring a flat torque curve with an intermediate profile, the Ferodo DS1.11 is repeatable across the entire temperature range, making it a great choice for many track drivers and racers. Ferodo FCP1348W-N DS1.11 Brake Pads Details: Manufacturer: Ferodo Manufacturer part number: FCP1348W-N Primary Use: Heavy Duty Endurance Application: All vehicle types Average Coefficient of Friction: 0.46 Temperature Range C: 200 - 750 C Temperature Range F: 392 - 1382 F Ferodo DS1.11 Brake Compound Details:The Ferodo DS1.11 is a long duration endurance pad with an incredible flat torque curve across the workable range of 392 to 1382 . Designed to put you on the podium of your next World Racing League race, the Ferodo DS1.11 is a track only pad that is designed for repeatable stopping performance and feel across a very wide temperature spectrum. The Ferodo DS1.11 brake compound makes the chassis repeatable in every brake zone, lap after lap. The cold friction profile of the Ferodo DS1.11 is predictable and grows linear as your pad heats up with very good fade resistance all the way to its maximum 1382 F limit. Another common use of the Ferodo DS1.11 is an advanced track day driver in the red group in a well set-up chassis with sticky rubber and aero. Ferodo FCP1348W-N DS1.11 Camaro Z28-ZL1 Rear Brake Pad Fitment: 2018 Chevrolet Camaro ZL1 2017 Chevrolet Camaro ZL1 2018 Chevrolet Camaro ZL1-1LE 2016 Chevrolet Camaro ZL1 2015 Chevrolet Camaro Z28 2014 Chevrolet Camaro Z28 2014 Chevrolet Camaro SS V8 2014 Chevrolet Camaro ZL1 2013 Chevrolet Camaro SS V8 2013 Chevrolet Camaro ZL1 2012 Chevrolet Camaro SS V8 2012 Chevrolet Camaro ZL1 2011 Chevrolet Camaro SS V8 2010 Chevrolet Camaro SS V8

Carbotech Brakes Carbotech CT1389 Brake Pads Porsche 997-987-991-981 Front from $238.00

Carbotech Brake Pads Carbotech Race and Track Pads CT 1389 is a popular Porsche 981 S/GTS, 991 C2, 997.2 C2, 997.2 C4, front pad. Measuring 17mm thick and available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer part number: CT1389 Most popular track combination: R10 Front, R8 Rear G-Loc cross reference: GP1389 Hawk cross reference: HB719._668 Material thickness of pad of backing plate and pad material: .668" Material thickness of pad of backing plate and pad material: 17mm [img-12155-left-large_default] Carbotech Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. Carbotech CT1465 Brake Pad Fitment: 2009 PORSCHE 911 CARRERA (2009) 2009 PORSCHE 911 CARRERA #N/A (2009) 2009 PORSCHE 911 TARGA (2009) 2009 PORSCHE 911 TARGA #N/A (2009) 2010 PORSCHE 911 CARRERA (2010) 2010 PORSCHE 911 CARRERA #N/A (2010) 2010 PORSCHE 911 TARGA (2010) 2010 PORSCHE 911 TARGA #N/A (2010) 2011 PORSCHE 911 CARRERA (2011) 2011 PORSCHE 911 CARRERA #N/A (2011) 2012 PORSCHE 911 NO SUBMODEL (2012) 2012 PORSCHE 911 NO SUBMODEL #N/A (2012) 2013 PORSCHE 911 NO SUBMODEL (2013) 2013 PORSCHE 911 NO SUBMODEL #N/A (2013) 2013 PORSCHE BOXSTER NO SUBMODEL (2013) 2013 PORSCHE BOXSTER NO SUBMODEL #N/A (2013) 2013 PORSCHE BOXSTER S (2013) 2013 PORSCHE BOXSTER S #N/A (2013) 2014 PORSCHE 911 NO SUBMODEL (2014) 2014 PORSCHE 911 NO SUBMODEL #N/A (2014) 2014 PORSCHE BOXSTER NO SUBMODEL (2014) 2014 PORSCHE BOXSTER NO SUBMODEL #N/A (2014) 2014 PORSCHE CAYMAN NO SUBMODEL (2014) 2014 PORSCHE CAYMAN NO SUBMODEL #N/A (2014) 2015 PORSCHE 911 99135193900 (2015) 2015 PORSCHE BOXSTER 99735193809 (2015) 2015 PORSCHE CAYMAN 99735193809 (2015) 2016 PORSCHE 911 NO SUBMODEL (2016) 2016 PORSCHE BOXSTER NO SUBMODEL (2016) 2016 PORSCHE CAYMAN NO SUBMODEL (2016) 2017 PORSCHE 718 BOXSTER NO SUBMODEL (2017) [img-12155-left-large_default]

Carbotech Brakes Carbotech CT412 C5 Corvette, 1994-2004 Mustang - Cobra, Bullitt, Mach 1 from $142.00

Carbotech CT412 C5 Corvette, 1994-2004 Mustang - Cobra, Bullitt, Mach 1 Carbotech CT412 fits the the Chevrolet Camaro, Corvette, Trans-Am, 1994-2004 Mustang - Cobra, Bullitt, Mach 1 are available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer part number: CT412 G-Loc equivalent: GLC412 Hawk Brake equivalent: HB111_.610 Thickness of backing plate and pad material: .610" Thickness of backing plate and pad material: 15mm Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. Carbotech CT412 Fitment: 2004 Ford Mustang Mach 1 2004 Ford Mustang Cobra & SVT, MACH 1 2004 Ford Mustang Cobra 2003 Ford Mustang Mach 1 2003 Ford Mustang Cobra & SVT, MACH 1 2003 Ford Mustang Cobra 2002 Ford Mustang Cobra F5ZZ2001A 2001 Ford Mustang Cobra & Bullitt 2001 Ford Mustang Cobra 2001 Ford Mustang Bullitt 2000 Ford Mustang Cobra & Bullitt 1999 Ford Mustang Cobra & Bullitt 1999 Ford Mustang Cobra 1998 Ford Mustang Cobra 1997 Ford Mustang Cobra 1996 Ford Mustang Cobra 1996 Chevrolet Corvette 1995 Ford Mustang Cobra SVT 1995 Ford Mustang Cobra R 1995 Ford Mustang Cobra 1995 Chevrolet Corvette Heavy Duty Suspension 1995 Chevrolet Corvette except heavy duty suspension 1994 Ford Mustang Cobra 1994 Chevrolet Corvette Heavy Duty Suspension 1994 Chevrolet Corvette except heavy duty suspension 1993 Chevrolet Corvette Heavy Duty Suspension 1993 Chevrolet Corvette except heavy duty suspension 1992 Pontiac Firebird w/Performance Package 1992 Pontiac Firebird Trans Am GTA w/Performance Package 1992 Pontiac Firebird Performance Pkg. 1992 Pontiac Firebird Formula w/Performance Package 1992 Chevrolet Corvette Heavy Duty Suspension 1992 Chevrolet Corvette except heavy duty suspension 1992 Chevrolet Camaro Z28 w/Heavy Duty Brakes 1992 Chevrolet Camaro RS w/Heavy Duty Brakes 1992 Chevrolet Camaro Rear Disc with 1LE Performance Pkg. 1991 Pontiac Firebird w/Performance Package 1991 Pontiac Firebird Trans Am GTA w/Performance Package 1991 Pontiac Firebird Performance Pkg. 1991 Pontiac Firebird Formula w/Performance Package 1991 Chevrolet Corvette Heavy Duty Suspension 1991 Chevrolet Corvette except heavy duty suspension 1991 Chevrolet Camaro Z28 w/Heavy Duty Brakes 1991 Chevrolet Camaro RS w/Heavy Duty Brakes 1991 Chevrolet Camaro Rear Disc with 1LE Performance Pkg. 1990 Pontiac Firebird w/Performance Package 1990 Pontiac Firebird Trans Am GTA w/Performance Package 1990 Pontiac Firebird Performance Pkg. 1990 Pontiac Firebird Formula w/Performance Package 1990 Chevrolet Corvette Heavy Duty Suspension 1990 Chevrolet Corvette except heavy duty suspension 1990 Chevrolet Camaro RS w/Heavy Duty Brakes 1990 Chevrolet Camaro Rear Disc with 1LE Performance Pkg. 1990 Chevrolet Camaro Iroc-Z w/Heavy Duty Brakes 1989 Pontiac Firebird w/Performance Package 1989 Pontiac Firebird Trans Am GTA w/Performance Package 1989 Pontiac Firebird Trans Am GTA SE w/Performance Package 1989 Pontiac Firebird Performance Pkg. 1989 Pontiac Firebird Formula w/Performance Package 1989 Chevrolet Corvette Heavy Duty Suspension 1989 Chevrolet Corvette except heavy duty suspension 1989 Chevrolet Camaro w/Heavy Duty Brakes 1989 Chevrolet Camaro Rear Disc with 1LE Performance Pkg. 1988 Pontiac Firebird w/Performance Package 1988 Pontiac Firebird Performance Pkg. 1988 Chevrolet Corvette Heavy Duty Suspension 1988 Chevrolet Corvette except heavy duty suspension 1988 Chevrolet Camaro w/Heavy Duty Brakes 1988 Chevrolet Camaro Rear Disc - with Performance Pkg. 1987 Chevrolet Camaro Rear Disc - with Performance Pkg. 1986 Chevrolet Camaro Rear Disc - with Performance Pkg. 1985 Chevrolet Camaro Rear Disc - with Performance Pkg.

Carbotech Brakes Carbotech CT78772-F 2020+ Toyota Supra (A90) 3.0 Front Brake Pads from $294.00

Carbotech CT78772-F 2020+ Supra (A90) 3.0 Front Brake Pads Carbotech CT78772-F fits the front axle of the 2020+ Toyota Supra 3.0 with the Brembo calipers. Available in Carbotech's 1521, AX6, XP8, XP10 and XP12 compounds. Carbotech offers a variety of compounds that can bring you to the deepest of brake zones, smooth consistent spirited mountain or track days, or the best street pads ever produced. Carbotech CT78772-F 2020 Supra Performance Front Brake Pads Details: Manufacturer: Carbotech Manufacturer part number: CT78772-F Fits: Front of 2020 Toyota Supra 3.0 with Brembo calipers Compounds available: 1521, AX6, XP8, XP10, XP12, XP20, XP24, & RP2 Most popular track combination: XP12 Front, XP10 Rear Carbotech Brake Compounds Carbotech 1521 The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotech AX6 The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotech XP8 A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotech XP10 When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech XP12 Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech XP20 The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech XP24 XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotech RP2 The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech CT78772-F Fitment: 2020+ Toyota Supra (A90) w/Brembo front calipers

Carbotech Brakes Carbotech CT1633 VW Front Caliper Brake Pads from $282.00

Carbotech CT1633 VW Front Caliper Brake Pads The Carbotech CT1633 brake pad set, fitting VW Golf R, GTI, Audi S3 and others, is available in Carbotech 1521, AX6, XP8, XP10, XP12, XP20, and XP24 compounds. Carbotech offers a variety of compounds that can bring you to the deepest of brake zones, smooth consistent spirited mountain or track days, or the best street pads ever produced. For XP8 and stronger compounds, we use laser cut backing plates that are thicker than OEM and do not use your anti-rattle factory spring clip. These will move around withing the caliper, but will work perfectly. 1521 and AX6 use the standard size water jet cut backing plate and can retain the OEM clips. How To Properly Bed In Carbotech Racing Brake Pads Carbotech CT1633 VW Front Caliper Brake Pads Details: Manufacturer: Carbotech Manufacturer Part Number: CT1633 FMSI: 1633 Most popular track combination: XP10 Front, XP8 Rear Material thickness of pad material and backing plate: .740" Material thickness of pad material and backing plate: 19mm Carbotech CT1633 VW Front Caliper Brake Pads Fitment: 2017 Volkswagen Golf GTI Mk7 with Performance Pack 2016 Volkswagen Golf GTI Mk7 with Performance Pack 2015 Volkswagen Golf GTI Mk7 with Performance Pack 2017 Volkswagen Golf GTI Mk7 Standard brakes 2017 Volkswagen Golf R Mk7 All 2016 Volkswagen Golf R Mk7 All 2015 Volkswagen Golf R Mk7 All 2018 Volkswagen Golf R Mk7 All 2018 Volkswagen Golf GTI Mk7 with Performance Pack 2018 Volkswagen Golf GTI Mk7 Standard brakes [img-12192-left-large_default] BRAKE COMPOUNDS Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. [img-12192-left-large_default]

Carbotech Brakes Carbotech Wilwood Dynapro Caliper Brake Pads CTW7812 from $143.00

Carbotech Dynapro Caliper Brake Pads CTW7812 Fitting many Wilwood Dynapro caliper fitments, the Carbotech CTW7812 brake pad set is available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. How To Properly Bed In Carbotech Racing Brake Pads Carbotech CT7812 Wilwood 12mm Brake Pad Details: Manufacturer: Carbotech Manufacturer Part Number: CTW7812 Most popular track combination: XP10 Front, XP8 Rear G-Loc cross reference: GP7812 Hawk cross reference: HB542_.490 Material thickness of pad of backing plate and pad material: .490" Material thickness of pad of backing plate and pad material: 12mm [img-12169-left-large_default] BRAKE COMPOUNDS Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. Carbotech CT7812 Brake Pad Fitment: Billet Dynalite - Side Inlet Dynapro Dust-Boot Dynapro Lug Mount Dynapro Lug Mount Dynapro Lug Mount Dynapro Lug Mount Forged DPHA Narrow Dynapro Radial Mount Narrow Dynapro Radial Mount [img-12168-left-large_default]

Carbotech Brakes Carbotech CT109L Lotus Elise (2005-11) Front Brake Pad Set from $137.00

Carbotech CT109L Lotus Elise (2005-11) Front Brake Pad Set Carbotech CT109L Brake Pads for the front calipers on 2005-2011 Lotus Elise (Base) in 1521, AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. How To Properly Bed In Carbotech Racing Brake Pads Carbotech CT109L Lotus Elise (2005-11) Front Brake Pad Set Details: Manufacturer: Carbotech Manufacturer Part Number: CT109L Material thickness of pad material and backing plate: .560" Material thickness of pad material and backing plate: 14mm Hawk brake cross over: HB180_.560 G-Loc Brake cross over: GLC109 Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. Carbotech CT109L fits the Front of: 2005-2011 Lotus Elise Base

Carbotech Brakes Carbotech CTBBK Brake Pads for Brembo Gran Turismo 6-Piston Calipers from $282.00

Carbotech CTBBK Brake Pads for Brembo Gran Turismo 6-Piston Calipers Fitting many Brembo caliper fitments, the Carbotech CTBBK brake pad set is available in Carbotech 1521, AX6, XP8, XP10, XP12, XP20, and XP24 compounds. How To Properly Bed In Carbotech Racing Brake Pads Carbotech CTBBK Brembo Brake Pad Details: Manufacturer: Carbotech Manufacturer Part Number: CTBBK Most popular track combination: XP10 Front, XP8 Rear Radial Depth: 54mm Total pad height: 73.2mm Material thickness of pad of backing plate and pad material: 16.8mm BRAKE COMPOUNDS Carbotech 1521 The Carbotech 1521 is our high performance street compound. The 1521 compound is known for its release and modulation, along with unmatched rotor friendliness. 1521 is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech 1521 operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotech AX6 The AX6 is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6 is NOT recommended as a race compound in most applications. Carbotech XP8 A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotech XP8 is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotech does NOT recommended XP8 as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8 is a great compound on the front & rear of most open wheel and sports racers. Carbotech XP10 When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech XP12 Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech XP20 The latest iteration of the highly successful XP series of compounds. XP20 is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XP series line of compounds from Carbotech . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotech XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotech compounds so successful. Carbotech XP20 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech XP24 XP24â is the pinnacle compound of the extremely successful XP Series of compounds engineered by Carbotech . This compound is based on the same fundamentals that exist in all other Carbotech formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotech offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotech offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24 has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotech RP2 The RP2 compound was engineered for endurance racing based on our highly successful XP Series formulations. RP2 has strong initial bite, a little less modulation than our XP12 , but still maintains the rotor friendliness of our XP series compounds. RP2 has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XP series compounds. Carbotech RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallic A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. Carbotech CTBBK Brake Pad Fitment: Brembo GT 6 Piston

Carbotech Brakes Carbotech CTCP5070-D54 Brake Pads AP CP9660, CP5555, CP5060 from $290.00

Carbotech CTCP5070-D54 Brake Pads AP CP9660, CP5555, CP5060 Carbotech CTCP5070-D54 fits the 6 piston AP Racing CP9660, AP Racing CP5060-2/3/4/5ST, AP Racing CP5555, Rotora FC6 and many others with a 54mm annulus. Available in Carbotech 1521, AX6, XP8, XP10 and XP12 compounds. Carbotech offers a variety of compounds that can bring you to the deepest of brake zones, smooth consistent spirited mountain or track days, or the best street pads ever produced. How To Properly Bed In Carbotech Racing Brake Pads [img-12179-left-large_default] Carbotech CTCP5070-D54 Brake Pads AP CP9660, CP5555, CP5060 Details: Manufacturer: Carbotech Manufacturer Part Number: CTCP5555-D54 Annulus: 54mm Material thickness of pad material and backing plate: .710" (18mm) Pagid interchange: 1904 Eyelet on the top center of the pad: No, it is removed [img-12179-left-large_default] CARBOTECH BRAKE COMPOUNDS Carbotech 1521 The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotech AX6 The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotech XP8 A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotech XP10 When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech XP12 Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech CTCP5555 Brake Pads Fitment: AP Racing CP9660 AP Racing CP5060-2/3/4/5ST AP Racing CP5555 Rotora FC6 Alfa RomeoGiulietta TCR18 Front Axle Alfa RomeoGiulietta TCR15 - 17 FordMustang FP350S (race car by FORD Performance) AP brakes18 Front Axle Honda (Acura)Civic TCR [race car]15 - 17 Front Axle MitsubishiLancer Evo X R4 Tarmac Rally07 - 16 Front Axle [img-12179-left-large_default]

Carbotech Brakes Carbotech CTW7912 Wilwood Powerlight Caliper Brake Pads from $181.00

Carbotech CTW7912 Wilwood Powerlight Caliper Brake Pads Fitting many Wilwood Calipers like the 7912 the Carbotech CTW7912 brake pad set is available in Carbotech 1521, AX6, XP8, XP10, XP12, XP20, and XP24 compounds. How To Properly Bed In Carbotech Racing Brake Pads Carbotech CTW7912 Wilwood Powerlight Caliper Brake Pads Details: Manufacturer: Carbotech Manufacturer Part Number: CTW7912 Most popular track combination: XP10 Front, XP8 Rear Carbotech CTW7912 Wilwood Powerlight Caliper Brake Pads Fitment: Wilwood Powerlight 7912 [img-12190-left-large_default] BRAKE COMPOUNDS Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. [img-12190-left-large_default]

Carbotech Brakes Carbotech FRS-BRZ-GT86 Front Brake Pad Set CT929 from $139.00

Carbotech FRS/BRZ/GT86 w/ standard Front Brake Pad Set Carbotech brake pads for the front of Subaru BRZ, Scion FRS, or Toyota GT86 with the standard calipers (not BBS). AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer Part Number: CT929 Brake Compounds Carbotech 1521 The Carbotech 1521 is our high performance street compound. The 1521 compound is known for its release and modulation, along with unmatched rotor friendliness. 1521 is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotech AX6 The AX6 is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6 due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotech XP8 A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotech XP8 is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotech does NOT recommended XP8 as a daily driven street pad due to elevated levels of dust and noise. Carbotech XP8 is a great compound on the front & rear of most open wheel and sports racers. Carbotech XP10 When Carbotech unleashed the XP10 to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10 has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10 still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotech compounds so successful. Carbotech XP10 is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech XP12 Another highly successful XP series compound with an excellent initial bite, torque and fade resistance over and above the XP10 compound. XP12 has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12 has that excellent Carbotech release and modulation that has made all other Carbotech compounds so successful. The XP12 is more rotor aggressive than XP10â , but compared to the competition the XP12 is still very rotor friendly. XP12 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech XP20 The latest iteration of the highly successful XP series of compounds. XP20 is a step up from the highly successful XP16 compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20 is another major step in progression of the highly successful XP series line of compounds from Carbotech . XP20 has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotech XP20 maintains our tradition of having the outstanding release and modulation that has made all other Carbotech compounds so successful. Carbotech XP20 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech XP24 XP24 is the pinnacle compound of the extremely successful XP Series of compounds engineered by Carbotech . This compound is based on the same fundamentals that exist in all other Carbotech formulations. XP24 has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotech offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotech offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24 has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotech XP24 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotech RP2 The RP2 compound was engineered for endurance racing based on our highly successful XP Series formulations. RP2 has strong initial bite, a little less modulation than our XP12 , but still maintains the rotor friendliness of our XP series compounds. RP2 has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2 is as rotor friendly as our XPâ series compounds. Carbotech RP2 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech 913 Kelated Metallic A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotech Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F.

HALO-P1-High-Performance-Brake-Fluid-Image

Castrol HALO P1 High Performance Brake Fluid $68.00

The World's Most Advanced Racing Brake Fluid Imagine you're on the race track, hitting the entry to a corner. Your foot hammers down on the brake, and you feel... absolute perfection. That's Halo P1 for you. Developed with Fade Resistant Technology, this specialist brake fluid is the secret sauce for top-tier motorsport enthusiasts worldwide. Why? Because when you're tearing up the track, the last thing you want is a mushy pedal feel. Halo P1 delivers a low and stable compressibility profile over an extended temperature range, not to mention a crazy-high dry boiling point of 341º C (646º F). All of this is to ensure your brake pedal feel remains as strong and consistent as your lap times. Halo P1 Brake Fluid Features & Benefits That'll Make You Weep Tears of Joy Fade Resistant Technology: Keeps your pedal feel consistent, lap after lap, so you can focus on nailing those corners. Pure Methyl Borate Ester Base: The purity level here is so high, it's like the distilled essence of speed itself, ensuring extreme resistance to compression, even when things get hot (and we mean really hot). World-Beating Dry Boiling Point: At 341° C (646° F), it's like this fluid laughed in the face of boiling points and set a new standard. Low Viscosity & High Lubricity: Because your brake system deserves to be as smooth as your driving skills. What Makes Halo P1 Brake FLuid The Secret Weapon? While other brake fluids are off playing checkers, Halo P1 is mastering chess. It's not just another methyl glycol borate ester brake fluid; it's a revolution in braking performance. With its unique proprietary manufacturing process, it achieves the highest levels of purity and the lowest compressibility possible, remaining constant over a wide temperature range. This is the highest boiling point of any racing brake fluid on the market, folks. And the lubricity? Off the charts, especially at high temperatures. Halo P1 Brake FLuid FAQs That'll Clear the Air Before you rush off to convert your entire garage to a Halo P1 shrine, let's tackle some of those burning questions you might have: Can I use Halo P1 in my daily driver? As much as we love the enthusiasm, Halo P1 is a race-only formula. It's like putting a rocket booster on a bicycle – thrilling, but not recommended. How often should I change my brake fluid with Halo P1? Regular maintenance is key in racing. Check with your team or mechanic, but before every major race is a good rule of thumb. The Call to Action You've Been Waiting For So, are you ready to elevate your racing game to legendary status? To feel the rush of confidence as you brake later and harder, knowing your brake fluid won't let you down? It's time to switch to Halo P1. Your podium awaits.

Carbotech Brakes Carbotech CT396 Brake Pads - BMW Rear from $148.00

Carbotech CT396 Brake Pads - BMW Rear Fitting many BMW track cars the Carbotech CT396 brake pad set is available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. How To Properly Bed In Carbotech Racing Brake Pads Carbotech CT396 Brake Pads - BMW Rear Details: Manufacturer: Carbotech Manufacturer Part Number: CT396 Most popular track combination: XP10 Front, XP8 Rear G-Loc cross reference: GP396 Hawk cross reference: HB227._630 Material thickness of pad of backing plate and pad material: .630" Material thickness of pad of backing plate and pad material: 16mm BRAKE COMPOUNDS Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. Carbotech CT396 Brake Pads - BMW Rear Fitment: 1989-1993 BMW M5 1987-1999 BMW M3 1987-1992 BMW 735/I/IL 1988 BMW 535I 34211157814 (1988) 1988 BMW 535IS 34211162536 (1988) 1988 BMW 750 SERIES NO SUBMODEL #N/A (1988) 1988 BMW 750IL NO SUBMODEL (1988) 1988 BMW 750IL NO SUBMODEL ALL (1988) 1989 BMW 525 SERIES E34 #N/A (1989) 1989 BMW 525I E34 (1989) 1989 BMW 525I NO SUBMODEL ALL (1989) 1989 BMW 535 SERIES E34 #N/A (1989) 1989 BMW 535I E34 (1989) 1989 BMW 750 SERIES NO SUBMODEL #N/A (1989) 1989 BMW 750IL NO SUBMODEL (1989) 1989 BMW 750IL NO SUBMODEL ALL (1989) 1990 BMW 525 SERIES E34 #N/A (1990) 1990 BMW 525I E34 (1990) 1990 BMW 525I NO SUBMODEL ALL (1990) 1990 BMW 535 SERIES E34 #N/A (1990) 1990 BMW 535I E34 (1990) 1990 BMW 750 SERIES NO SUBMODEL #N/A (1990) 1990 BMW 750IL NO SUBMODEL (1990) 1990 BMW 750IL NO SUBMODEL ALL (1990) 1991 BMW 525 SERIES E34 #N/A (1991) 1991 BMW 525I E34 (1991) 1991 BMW 525I NO SUBMODEL ALL (1991) 1991 BMW 535 SERIES E34 #N/A (1991) 1991 BMW 535I E34 (1991) 1991 BMW 750 SERIES E32 MODEL #N/A (1991) 1991 BMW 750IL E32 MODEL (1991) 1991 BMW 750IL NO SUBMODEL ALL (1991) 1992 BMW 318 SERIES E36 (5 LUG) #N/A (1992) 1992 BMW 318I E36 (5 LUG) (1992) 1992 BMW 318I NO SUBMODEL ALL (1992) 1992 BMW 318IS E36 (5 LUG) (1992) 1992 BMW 318IS NO SUBMODEL ALL (1992) 1992 BMW 325 SERIES E36 MODELS #N/A (1992) 1992 BMW 325I E36 MODELS (1992) 1992 BMW 325I E36 ALL (1992) 1992 BMW 325IS E36 MODELS (1992) 1992 BMW 325IS NO SUBMODEL ALL (1992) 1992 BMW 525 SERIES E34 #N/A (1992) 1992 BMW 525I E34 (1992) 1992 BMW 525I NO SUBMODEL ALL (1992) 1992 BMW 535 SERIES E34 #N/A (1992) 1992 BMW 535I E34 (1992) 1992 BMW 730 SERIES NO SUBMODEL #N/A (1992) 1992 BMW 750 SERIES E32 MODEL #N/A (1992) 1992 BMW 750IL E32 MODEL (1992) 1992 BMW 750IL NO SUBMODEL ALL (1992) 1993 BMW 318 SERIES E36 318I, 318IS #N/A (1993) 1993 BMW 318I E36 318I, 318IS (1993) 1993 BMW 318I NO SUBMODEL ALL (1993) 1993 BMW 318IS E36 318I, 318IS (1993) 1993 BMW 318IS NO SUBMODEL ALL (1993) 1993 BMW 325 SERIES NO SUBMODEL #N/A (1993) 1993 BMW 325I E36 ALL (1993) 1993 BMW 325I NO SUBMODEL (1993) 1993 BMW 325IS NO SUBMODEL (1993) 1993 BMW 325IS NO SUBMODEL ALL (1993) 1993 BMW 525 SERIES E34 #N/A (1993) 1993 BMW 525I E34 (1993) 1993 BMW 525I NO SUBMODEL ALL (1993) 1993 BMW 525IT E34 (1993) 1993 BMW 525IT NO SUBMODEL ALL (1993) 1993 BMW 530 SERIES E34 #N/A (1993) 1993 BMW 535 SERIES E34 #N/A (1993) 1993 BMW 535I E34 (1993) 1993 BMW 540 SERIES NO SUBMODEL #N/A (1993) 1993 BMW 730 SERIES NO SUBMODEL #N/A (1993) 1993 BMW 740 SERIES E32 MODEL #N/A (1993) 1993 BMW 740I E32 MODEL (1993) 1993 BMW 740I NO SUBMODEL ALL (1993) 1993 BMW 740IL E32 MODEL (1993) 1993 BMW 740IL NO SUBMODEL ALL (1993) 1993 BMW 750 SERIES E32 MODEL #N/A (1993) 1993 BMW 750IL E32 MODEL (1993) 1993 BMW 750IL NO SUBMODEL ALL (1993) 1994 BMW 318 SERIES E36 318I, 318IS #N/A (1994) 1994 BMW 318I E36 318I, 318IS (1994) 1994 BMW 318I NO SUBMODEL ALL (1994) 1994 BMW 318I REAR FROM 05/1993 34211161455 (1994) 1994 BMW 318IS E36 318I, 318IS (1994) 1994 BMW 318IS NO SUBMODEL ALL (1994) 1994 BMW 318IS REAR FROM 05/1993 34211161455 (1994) 1994 BMW 325 SERIES NO SUBMODEL #N/A (1994) 1994 BMW 325I E36 ALL (1994) 1994 BMW 325I NO SUBMODEL (1994) 1994 BMW 325I REAR FROM 05/1993 34211161455 (1994) 1994 BMW 325IS NO SUBMODEL (1994) 1994 BMW 325IS NO SUBMODEL ALL (1994) 1994 BMW 325IS REAR FROM 05/1993 34211161455 (1994) 1994 BMW 525 SERIES E34 #N/A (1994) 1994 BMW 525I E34 (1994) 1994 BMW 525I NO SUBMODEL ALL (1994) 1994 BMW 525IT E34 (1994) 1994 BMW 525IT NO SUBMODEL ALL (1994) 1994 BMW 530 SERIES E34 #N/A (1994) 1994 BMW 530I E34 (1994) 1994 BMW 540 SERIES NO SUBMODEL #N/A (1994) 1994 BMW 540I NO SUBMODEL (1994) 1994 BMW 740 SERIES E32 MODEL #N/A (1994) 1994 BMW 740I E32 MODEL (1994) 1994 BMW 740I NO SUBMODEL ALL (1994) 1994 BMW 740IL E32 MODEL (1994) 1994 BMW 740IL NO SUBMODEL ALL (1994) 1994 BMW 750 SERIES E32 MODEL #N/A (1994) 1994 BMW 750IL E32 MODEL (1994) 1994 BMW 750IL NO SUBMODEL ALL (1994) 1995 BMW 318 SERIES 318TI #N/A (1995) 1995 BMW 318 SERIES E36 318I, 318IS #N/A (1995) 1995 BMW 318I E36 318I, 318IS (1995) 1995 BMW 318I NO SUBMODEL ALL (1995) 1995 BMW 318IS E36 318I, 318IS (1995) 1995 BMW 318IS NO SUBMODEL ALL (1995) 1995 BMW 318TI 318TI (1995) 1995 BMW 318TI NO SUBMODEL ALL (1995) 1995 BMW 325 SERIES NO SUBMODEL #N/A (1995) 1995 BMW 325I E36 ALL (1995) 1995 BMW 325I NO SUBMODEL (1995) 1995 BMW 325IS NO SUBMODEL (1995) 1995 BMW 325IS NO SUBMODEL ALL (1995) 1995 BMW 525 SERIES E34 #N/A (1995) 1995 BMW 525I E34 (1995) 1995 BMW 525I NO SUBMODEL ALL (1995) 1995 BMW 525IT E34 (1995) 1995 BMW 525IT NO SUBMODEL ALL (1995) 1995 BMW 530 SERIES E34 #N/A (1995) 1995 BMW 530I E34 (1995) 1995 BMW 540 SERIES NO SUBMODEL #N/A (1995) 1995 BMW 540I NO SUBMODEL (1995) 1996 BMW 318 SERIES 318TI #N/A (1996) 1996 BMW 318 SERIES E36 318I, 318IS #N/A (1996) 1996 BMW 318I E36 318I, 318IS (1996) 1996 BMW 318I NO SUBMODEL ALL (1996) 1996 BMW 318IS E36 318I, 318IS (1996) 1996 BMW 318IS NO SUBMODEL ALL (1996) 1996 BMW 318TI 318TI (1996) 1996 BMW 318TI NO SUBMODEL ALL (1996) 1996 BMW 325I E36 ALL (1996) 1996 BMW 328 SERIES CONVERTIBLE - VENTED REAR DISC #N/A (1996) 1996 BMW 328 SERIES SEDAN/COUPE - SOLID REAR DISC #N/A (1996) 1996 BMW 328I CONVERTIBLE - VENTED REAR DISC (1996) 1996 BMW 328I SEDAN/COUPE - SOLID REAR DISC (1996) 1996 BMW 328IS CONVERTIBLE - VENTED REAR DISC (1996) 1996 BMW 328IS SEDAN/COUPE - SOLID REAR DISC (1996) 1996 BMW Z3 4 CYLINDER (1996) 1996 BMW Z3 6 CYLINDER (1996) 1996 BMW Z3 ROADSTER ALL (1996) 1997 BMW 318 SERIES 318TI #N/A (1997) 1997 BMW 318 SERIES E36 318I, 318IS #N/A (1997) 1997 BMW 318I E36 318I, 318IS (1997) 1997 BMW 318I NO SUBMODEL ALL (1997) 1997 BMW 318IS E36 318I, 318IS (1997) 1997 BMW 318IS NO SUBMODEL ALL (1997) 1997 BMW 318TI 318TI (1997) 1997 BMW 318TI NO SUBMODEL ALL (1997) 1997 BMW 328 SERIES 328CI CONVERTIBLE E36 #N/A (1997) 1997 BMW 328 SERIES SEDAN & COUPE E36 #N/A (1997) 1997 BMW 328I SEDAN & COUPE E36 (1997) 1997 BMW 328IS SEDAN & COUPE E36 (1997) 1997 BMW 528I NO SUBMODEL ALL (1997) 1997 BMW 540I 34211163395 (1997) 1997 BMW Z3 4 CYLINDER (1997) 1997 BMW Z3 6 CYLINDER (1997) 1997 BMW Z3 ROADSTER ALL (1997) 1998 BMW 318 SERIES 318TI #N/A (1998) 1998 BMW 318 SERIES E36 318I, 318IS #N/A (1998) 1998 BMW 318I E36 318I, 318IS (1998) 1998 BMW 318I NO SUBMODEL ALL (1998) 1998 BMW 318TI 318TI (1998) 1998 BMW 318TI NO SUBMODEL ALL (1998) 1998 BMW 323 SERIES 323I E36 CONVERTIBLE - VENTED REAR ROTORS #N/A (1998) 1998 BMW 323 SERIES 323IS E36 COUPE - SOLID REAR ROTORS #N/A (1998) 1998 BMW 323I 323I E36 CONVERTIBLE - VENTED REAR ROTORS (1998) 1998 BMW 323IS 323IS E36 COUPE - SOLID REAR ROTORS (1998) 1998 BMW 323IS NO SUBMODEL ALL (1998) 1998 BMW 328 SERIES 328CI CONVERTIBLE E36 #N/A (1998) 1998 BMW 328 SERIES SEDAN & COUPE E36 #N/A (1998) 1998 BMW 328I SEDAN & COUPE E36 (1998) 1998 BMW 328I NO SUBMODEL ALL (1998) 1998 BMW 328IC NO SUBMODEL ALL (1998) 1998 BMW 328IS SEDAN & COUPE E36 (1998) 1998 BMW 328IS NO SUBMODEL ALL (1998) 1998 BMW 528I NO SUBMODEL ALL (1998) 1998 BMW 540I 34211163395 (1998) 1998 BMW Z3 4 CYLINDER (1998) 1998 BMW Z3 6 CYLINDER EXC. M SERIES (1998) 1998 BMW Z3 M SERIES (1998) 1998 BMW Z3 1.9L 34211162446 (1998) 1998 BMW Z3 2.8L 34216761238 (1998) 1998 BMW Z3 M ROADSTER ALL (1998) 1998 BMW Z3 ROADSTER ALL (1998) 1999 BMW 318 SERIES 318TI #N/A (1999) 1999 BMW 318TI 318TI (1999) 1999 BMW 323 SERIES 323I - E36 CONVERTIBLE #N/A (1999) 1999 BMW 323 SERIES 323I - E46 SEDAN, COUPE #N/A (1999) 1999 BMW 323 SERIES 323I, 323IS - E36 SEDAN, COUPE #N/A (1999) 1999 BMW 323I 323I - E36 CONVERTIBLE (1999) 1999 BMW 323I 323I - E46 SEDAN, COUPE (1999) 1999 BMW 323I 323I, 323IS - E36 SEDAN, COUPE (1999) 1999 BMW 323I 34211164499 (1999) 1999 BMW 323I 34216750190 (1999) 1999 BMW 323I CONVERTIBLE 34216761239 (1999) 1999 BMW 323I NO SUBMODEL ALL (1999) 1999 BMW 323IS 323I, 323IS - E36 SEDAN, COUPE (1999) 1999 BMW 323IS NO SUBMODEL ALL (1999) 1999 BMW 328 SERIES E36 328CI CONVERTIBLE #N/A (1999) 1999 BMW 328 SERIES E36 328I COUPE/SEDAN #N/A (1999) 1999 BMW 328 SERIES E46 SEDAN #N/A (1999) 1999 BMW 328I 34216750190 (1999) 1999 BMW 328I E36 328I COUPE/SEDAN (1999) 1999 BMW 328I E46 SEDAN (1999) 1999 BMW 328I CONVERTIBLE 34216761239 (1999) 1999 BMW 328I NO SUBMODEL ALL (1999) 1999 BMW 328IC NO SUBMODEL ALL (1999) 1999 BMW 328IS E46 SEDAN (1999) 1999 BMW 328IS NO SUBMODEL ALL (1999) 1999 BMW 528I 34211163395 (1999) 1999 BMW 528IT NO SUBMODEL ALL (1999) 1999 BMW 540I 34211163395 (1999) 1999 BMW Z3 34211165233 (1999) 1999 BMW Z3 EXCEPT M SERIES (1999) 1999 BMW Z3 M SERIES (1999) 1999 BMW Z3 COUPE ALL (1999) 1999 BMW Z3 M COUPE ALL (1999) 1999 BMW Z3 M ROADSTER ALL (1999) 1999 BMW Z3 ROADSTER ALL (1999) 1999 SAAB 9-5 FROM SERIAL NUMBER X3025752 ALL (1999) 1999 SAAB 9-5 FRONT FROM VIN X3020001 REAR FROM VIN X3025752 5058110 (1999) 2000 BMW 323 SERIES 323I - E46 WAGON #N/A (2000) 2000 BMW 323 SERIES 323I, 323CI - E46 SEDAN, COUPE, CONVERTIBLE #N/A (2000) 2000 BMW 323CI 323I, 323CI - E46 SEDAN, COUPE, CONVERTIBLE (2000) 2000 BMW 323CI NO SUBMODEL ALL (2000) 2000 BMW 323I 323I - E46 WAGON (2000) 2000 BMW 323I 323I, 323CI - E46 SEDAN, COUPE, CONVERTIBLE (2000) 2000 BMW 323I 34216750190 (2000) 2000 BMW 323I NO SUBMODEL ALL (2000) 2000 BMW 323I SPORT WAGON 34216761241 (2000) 2000 BMW 323I SPORT WAGON ALL (2000) 2000 BMW 328 SERIES E46 SEDAN #N/A (2000) 2000 BMW 328CI 34211164499 (2000) 2000 BMW 328CI 34216750190 (2000) 2000 BMW 328CI E46 SEDAN (2000) 2000 BMW 328CI NO SUBMODEL 2.8L (2000) 2000 BMW 328I E46 SEDAN (2000) 2000 BMW 328I NO SUBMODEL ALL (2000) 2000 BMW 528I 34211163395 (2000) 2000 BMW 528IT NO SUBMODEL ALL (2000) 2000 BMW 540I 34211163395 (2000) 2000 BMW Z3 34211165233 (2000) 2000 BMW Z3 EXCEPT M SERIES (2000) 2000 BMW Z3 M SERIES (2000) 2000 BMW Z3 COUPE ALL (2000) 2000 BMW Z3 M COUPE ALL (2000) 2000 BMW Z3 M ROADSTER ALL (2000) 2000 BMW Z3 ROADSTER ALL (2000) 2000 SAAB 9-5 AERO ALL (2000) 2001 BMW 325 SERIES 325I; 325CI RWD (E46) #N/A (2001) 2001 BMW 325 SERIES 325XI AWD ONLY (E46) #N/A (2001) 2001 BMW 325CI 325I; 325CI RWD (E46) (2001) 2001 BMW 325CI NO SUBMODEL ALL (2001) 2001 BMW 325I 325I; 325CI RWD (E46) (2001) 2001 BMW 325I NO SUBMODEL ALL (2001) 2001 BMW 325I SPORT WAGON ALL (2001) 2001 BMW 325XI 325XI AWD ONLY (E46) (2001) 2001 BMW 325XI NO SUBMODEL ALL (2001) 2001 BMW 325XI SPORT WAGON ALL (2001) 2001 BMW 525I NO SUBMODEL ALL (2001) 2001 BMW 525I SPORT WAGON ALL (2001) 2001 BMW 530I 34211163395 (2001) 2001 BMW 540I 34211163395 (2001) 2001 BMW Z3 2.5L (2001) 2001 BMW Z3 3.0L (2001) 2001 BMW Z3 34211165233 (2001) 2001 BMW Z3 M SERIES (2001) 2001 BMW Z3 COUPE 2.5L (2001) 2001 BMW Z3 COUPE 3.0L (2001) 2001 BMW Z3 M COUPE ALL (2001) 2001 BMW Z3 M ROADSTER ALL (2001) 2001 BMW Z3 ROADSTER 2.5L (2001) 2001 BMW Z3 ROADSTER 3.0L (2001) 2001 SAAB 9-5 AERO ALL (2001) 2001 SAAB 9-5 NO SUBMODEL ALL (2001) 2002 BMW 325 SERIES 325I; 325CI RWD (E46) #N/A (2002) 2002 BMW 325 SERIES 325XI AWD ONLY (E46) #N/A (2002) 2002 BMW 325CI 325I; 325CI RWD (E46) (2002) 2002 BMW 325CI NO SUBMODEL ALL (2002) 2002 BMW 325I 325I; 325CI RWD (E46) (2002) 2002 BMW 325I NO SUBMODEL ALL (2002) 2002 BMW 325I SPORT WAGON ALL (2002) 2002 BMW 325XI 325XI AWD ONLY (E46) (2002) 2002 BMW 325XI NO SUBMODEL ALL (2002) 2002 BMW 325XI SPORT WAGON ALL (2002) 2002 BMW 525I NO SUBMODEL ALL (2002) 2002 BMW 525I SPORT WAGON ALL (2002) 2002 BMW 530I 34211163395 (2002) 2002 BMW 540I 34211163395 (2002) 2002 BMW Z3 2.5L (2002) 2002 BMW Z3 3.0L (2002) 2002 BMW Z3 34211165233 (2002) 2002 BMW Z3 M SERIES (2002) 2002 BMW Z3 COUPE 2.5L (2002) 2002 BMW Z3 COUPE 3.0L (2002) 2002 BMW Z3 M COUPE ALL (2002) 2002 BMW Z3 M ROADSTER ALL (2002) 2002 BMW Z3 ROADSTER 2.5L (2002) 2002 BMW Z3 ROADSTER 3.0L (2002) 2002 SAAB 9-5 AERO ALL (2002) 2002 SAAB 9-5 ARC ALL (2002) 2002 SAAB 9-5 LINEAR ALL (2002) 2003 BMW 325 SERIES 325I; 325CI RWD (E46) #N/A (2003) 2003 BMW 325 SERIES 325XI AWD ONLY (E46) #N/A (2003) 2003 BMW 325CI 325I; 325CI RWD (E46) (2003) 2003 BMW 325CI NO SUBMODEL ALL (2003) 2003 BMW 325I 325I; 325CI RWD (E46) (2003) 2003 BMW 325I NO SUBMODEL ALL (2003) 2003 BMW 325I SPORT WAGON ALL (2003) 2003 BMW 325XI 325XI AWD ONLY (E46) (2003) 2003 BMW 325XI NO SUBMODEL ALL (2003) 2003 BMW 325XI SPORT WAGON ALL (2003) 2003 BMW 525I NO SUBMODEL ALL (2003) 2003 BMW 525I SPORT WAGON ALL (2003) 2003 BMW 530I 34211163395 (2003) 2003 BMW 540I 34211163395 (2003) 2003 BMW Z4 2.5I (2003) 2003 BMW Z4 3.0I (2003) 2003 BMW Z4 ROADSTER 2.5L (2003) 2003 SAAB 9-5 AERO ALL (2003) 2003 SAAB 9-5 ARC ALL (2003) 2003 SAAB 9-5 LINEAR ALL (2003) 2004 BMW 325 SERIES 325I; 325CI RWD (E46) #N/A (2004) 2004 BMW 325 SERIES 325XI AWD ONLY (E46) #N/A (2004) 2004 BMW 325CI 325I; 325CI RWD (E46) (2004) 2004 BMW 325CI NO SUBMODEL ALL (2004) 2004 BMW 325I 325I; 325CI RWD (E46) (2004) 2004 BMW 325I 34216761241 (2004) 2004 BMW 325I NO SUBMODEL ALL (2004) 2004 BMW 325XI 325XI AWD ONLY (E46) (2004) 2004 BMW 325XI NO SUBMODEL ALL (2004) 2004 BMW Z4 2.5I (2004) 2004 BMW Z4 3.0I (2004) 2004 BMW Z4 2.5I 2.5L (2004) 2004 BMW Z4 2.5L 34216761239 (2004) 2004 BMW Z4 3.0I 3.0L (2004) 2004 SAAB 9-5 AERO ALL (2004) 2004 SAAB 9-5 ARC ALL (2004) 2004 SAAB 9-5 LINEAR ALL (2004) 2005 BMW 325 SERIES 325I; 325CI RWD (E46) #N/A (2005) 2005 BMW 325 SERIES 325XI AWD ONLY (E46) #N/A (2005) 2005 BMW 325CI 325I; 325CI RWD (E46) (2005) 2005 BMW 325CI NO SUBMODEL ALL (2005) 2005 BMW 325I 325I; 325CI RWD (E46) (2005) 2005 BMW 325I NO SUBMODEL ALL (2005) 2005 BMW 325XI 325XI AWD ONLY (E46) (2005) 2005 BMW 325XI NO SUBMODEL ALL (2005) 2005 BMW Z4 2.5I (2005) 2005 BMW Z4 3.0I (2005) 2005 BMW Z4 2.5I 2.5L (2005) 2005 BMW Z4 2.5L 34216761239 (2005) 2005 BMW Z4 3.0I 3.0L (2005) 2005 SAAB 9-5 AERO ALL (2005) 2005 SAAB 9-5 ARC ALL (2005) 2005 SAAB 9-5 LINEAR ALL (2005) 2006 BMW 325 SERIES CI COUPE & CONVERTIBLE (E46) #N/A (2006) 2006 BMW 325CI CI COUPE & CONVERTIBLE (E46) (2006) 2006 BMW 325CI NO SUBMODEL ALL (2006) 2006 BMW Z4 3.0I (2006) 2006 BMW Z4 3.0SI (2006) 2006 BMW Z4 3.0SI 34216761241 (2006) 2006 BMW Z4 COUPE 3.0SI 3.0L (2006) 2006 BMW Z4 ROADSTER 3.0I 3.0L (2006) 2006 BMW Z4 ROADSTER 3.0I 34216761241 (2006) 2006 SAAB 9-5 2.3T W/WEAR SENSOR ALL (2006) 2006 SAAB 9-5 288MM ROTOR 5058110 (2006) 2006 SAAB 9-5 308MM ROTOR 5058110 (2006) 2006 SAAB 9-5 AERO W/WEAR SENSOR ALL (2006) 2007 BMW 325CI NO SUBMODEL ALL (2007) 2007 BMW Z4 3.0I (2007) 2007 BMW Z4 3.0SI (2007) 2007 BMW Z4 3.0SI 34216761241 (2007) 2007 BMW Z4 COUPE 3.0SI 3.0L (2007) 2007 BMW Z4 ROADSTER 3.0I 3.0L (2007) 2007 BMW Z4 ROADSTER 3.0I 34216761241 (2007) 2007 SAAB 9-5 2.3T W/WEAR SENSOR ALL (2007) 2007 SAAB 9-5 288MM ROTOR 5058110 (2007) 2007 SAAB 9-5 308MM ROTOR 5058110 (2007) 2007 SAAB 9-5 AERO W/WEAR SENSOR ALL (2007) 2008 BMW Z4 3.0I (2008) 2008 BMW Z4 3.0SI (2008) 2008 BMW Z4 COUPE 3.0SI 3.0L (2008) 2008 BMW Z4 ROADSTER 3.0I 3.0L (2008) 2008 SAAB 9-5 2.3T W/WEAR SENSOR ALL (2008) 2008 SAAB 9-5 288MM ROTOR 5058110 (2008) 2008 SAAB 9-5 308MM ROTOR 5058110 (2008) 2008 SAAB 9-5 AERO W/WEAR SENSOR ALL (2008) 2009 SAAB 9-5 2.3T W/WEAR SENSOR ALL (2009) 2009 SAAB 9-5 288MM ROTOR 5058110 (2009) 2009 SAAB 9-5 308MM ROTOR 5058110 (2009) 2009 SAAB 9-5 AERO W/WEAR SENSOR ALL (2009)

Carbotech Brakes Carbotech CT1134 Brake Pads Porsche 997-987-991-981 Rear from $164.00

Carbotech CT1134 Brake Pads Porsche 997/987/991/981 Rear Brake Pads Carbotech Race and Track Pads CT 1134 is a popular Porsche 997, 991, 981 981 Cayman and Boxster rear pad. Measuring 16mm thick and available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer part number: CT1134 Most popular track combination: R10 Front, R8 Rear G-Loc cross reference: GP1134 Hawk cross reference: HB665._577 Material thickness of pad of backing plate and pad material: .577" Material thickness of pad of backing plate and pad material: 15mm Carbotech Brake Compounds Carbotech 1521 The Carbotech 1521 is our high performance street compound. The 1521 compound is known for its release and modulation, along with unmatched rotor friendliness. 1521 is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech 1521 operating range starts out at ambient and goes up to 800F (426C+). 1521 is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotech 1521 is NOT recommended for ANY track use. Carbotech AX6 The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotech XP8 A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F.

Carbotech Brakes Carbotech CT787 Brake Pads - Honda & Acura Front from $172.00

Carbotech Brake Pads How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer part number: CT787 Fits: Honda Applications from 1999-2014 Honda Accord and other front pads. Carbotech Brake Pads are available in Carbotech 1521, AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. [img-12121-left-large_default] Carbotech Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. [img-7276-left-large_default] Carbotech CT787 Brake Pads | Honda & Acura Fitment Guide: 1999 ACURA RL NO SUBMODEL (1999, 1999) 1999 ACURA RL NO SUBMODEL ALL (1999, 1999) 1999 ACURA TL NO SUBMODEL ALL (1999, 1999) 2000 ACURA RL NO SUBMODEL (2000, 2000) 2000 ACURA RL NO SUBMODEL ALL (2000, 2000) 2000 ACURA TL NO SUBMODEL ALL (2000, 2000) 2001 ACURA CL NO SUBMODEL ALL (2001, 2001) 2001 ACURA CL TYPE-S ALL (2001, 2001) 2001 ACURA RL NO SUBMODEL (2001, 2001) 2001 ACURA RL NO SUBMODEL ALL (2001, 2001) 2001 ACURA TL NO SUBMODEL ALL (2001, 2001) 2002 ACURA CL 45022S0KA11 (2002, 2002) 2002 ACURA RL NO SUBMODEL (2002, 2002) 2002 ACURA RL NO SUBMODEL ALL (2002, 2002) 2002 ACURA TL NO SUBMODEL ALL (2002, 2002) 2002 ACURA TL TYPE-S ALL (2002, 2002) 2003 ACURA CL 45022S0KA11 (2003, 2003) 2003 ACURA RL NO SUBMODEL (2003, 2003) 2003 ACURA RL NO SUBMODEL ALL (2003, 2003) 2003 ACURA TL NO SUBMODEL ALL (2003, 2003) 2003 ACURA TL TYPE-S ALL (2003, 2003) 2003 HONDA ACCORD COUPE V6 MODELS WITH AUTOMATIC TRANS (2003, 2003) 2003 HONDA ACCORD COUPE V6 MODELS WITH MANUAL TRANS (2003, 2003) 2003 HONDA ACCORD SEDAN 6 CYLINDER (2003, 2003) 2004 ACURA RL NO SUBMODEL (2004, 2004) 2004 ACURA RL NO SUBMODEL ALL (2004, 2004) 2004 ACURA TL W/O BREMBO FRONT CALIPERS ALL (2004, 2004) 2004 ACURA TSX NO SUBMODEL (2004, 2004) 2004 ACURA TSX NO SUBMODEL ALL (2004, 2004) 2004 HONDA ACCORD COUPE V6 MODELS WITH AUTOMATIC TRANS (2004, 2004) 2004 HONDA ACCORD COUPE V6 MODELS WITH MANUAL TRANS (2004, 2004) 2004 HONDA ACCORD SEDAN 6 CYLINDER (2004, 2004) 2005 ACURA TL W/O BREMBO FRONT CALIPERS ALL (2005, 2005) 2005 ACURA TSX NO SUBMODEL (2005, 2005) 2005 ACURA TSX NO SUBMODEL ALL (2005, 2005) 2005 HONDA ACCORD COUPE V6 MODELS WITH AUTOMATIC TRANS (2005, 2005) 2005 HONDA ACCORD COUPE V6 MODELS WITH MANUAL TRANS (2005, 2005) 2005 HONDA ACCORD SEDAN 6 CYLINDER; EXCEPT HYBRID (2005, 2005) 2006 ACURA TL W/O BREMBO FRONT CALIPERS ALL (2006, 2006) 2006 ACURA TSX NO SUBMODEL (2006, 2006) 2006 ACURA TSX NO SUBMODEL ALL (2006, 2006) 2006 HONDA ACCORD COUPE V6 MODELS WITH AUTOMATIC TRANS (2006, 2006) 2006 HONDA ACCORD COUPE V6 MODELS WITH MANUAL TRANS (2006, 2006) 2006 HONDA ACCORD HYBRID V6 HYBRID (2006, 2006) 2006 HONDA ACCORD HYBRID, SEDAN 3.0L (2006, 2006) 2006 HONDA ACCORD SEDAN 6 CYLINDER; EXCEPT HYBRID (2006, 2006) 2006 HONDA CIVIC SEDAN GX; W/REAR DRUMS (2006, 2006) 2007 ACURA TL W/O BREMBO FRONT CALIPERS ALL (2007, 2007) 2007 ACURA TSX NO SUBMODEL (2007, 2007) 2007 ACURA TSX NO SUBMODEL ALL (2007, 2007) 2007 HONDA ACCORD COUPE V6 MODELS WITH AUTOMATIC TRANS (2007, 2007) 2007 HONDA ACCORD COUPE V6 MODELS WITH MANUAL TRANS (2007, 2007) 2007 HONDA ACCORD HYBRID V6 HYBRID (2007, 2007) 2007 HONDA ACCORD HYBRID, SEDAN 3.0L (2007, 2007) 2007 HONDA ACCORD SEDAN 6 CYL; EXCEPT HYBRID (2007, 2007) 2007 HONDA CIVIC SEDAN GX; W/REAR DRUMS (2007, 2007) 2008 ACURA TL W/O BREMBO FRONT CALIPERS ALL (2008, 2008) 2008 ACURA TSX NO SUBMODEL (2008, 2008) 2008 ACURA TSX NO SUBMODEL ALL (2008, 2008) 2008 HONDA ACCORD COUPE EX, EX-L 4 CYLINDER OR EX-L V6 (2008, 2008) 2008 HONDA ACCORD EX, COUPE 2.4L (2008, 2008) 2008 HONDA ACCORD EX, COUPE 3.5L (2008, 2008) 2008 HONDA ACCORD EX, SEDAN 2.4L (2008, 2008) 2008 HONDA ACCORD EX, SEDAN 3.5L (2008, 2008) 2008 HONDA ACCORD SEDAN EX, EX-L (2008, 2008) 2008 HONDA CIVIC SEDAN GX; W/REAR DRUMS (2008, 2008) 2009 ACURA TSX NO SUBMODEL ALL (2009, 2009) 2009 HONDA ACCORD COUPE EX, EX-L 4 CYLINDER OR EX-L V6 (2009, 2009) 2009 HONDA ACCORD EX, COUPE 2.4L (2009, 2009) 2009 HONDA ACCORD EX, COUPE 3.5L (2009, 2009) 2009 HONDA ACCORD EX, SEDAN 2.4L (2009, 2009) 2009 HONDA ACCORD EX, SEDAN 3.5L (2009, 2009) 2009 HONDA ACCORD SEDAN EX, EX-L (2009, 2009) 2009 HONDA CIVIC SEDAN GX; W/REAR DRUMS (2009, 2009) 2010 ACURA TSX NO SUBMODEL ALL (2010, 2010) 2010 HONDA ACCORD COUPE EX, EX-L 4 CYLINDER OR EX-L V6 (2010, 2010) 2010 HONDA ACCORD EX, COUPE 2.4L (2010, 2010) 2010 HONDA ACCORD EX, COUPE 3.5L (2010, 2010) 2010 HONDA ACCORD EX, SEDAN 2.4L (2010, 2010) 2010 HONDA ACCORD EX, SEDAN 3.5L (2010, 2010) 2010 HONDA ACCORD SEDAN EX, EX-L (2010, 2010) 2010 HONDA CIVIC SEDAN GX; W/REAR DRUMS (2010, 2010) 2011 ACURA TSX NO SUBMODEL ALL (2011, 2011) 2011 HONDA ACCORD COUPE EX, EX-L 4 CYLINDER OR EX-L V6 (2011, 2011) 2011 HONDA ACCORD EX, COUPE 2.4L (2011, 2011) 2011 HONDA ACCORD EX, COUPE 3.5L (2011, 2011) 2011 HONDA ACCORD EX, SEDAN 2.4L (2011, 2011) 2011 HONDA ACCORD EX, SEDAN 3.5L (2011, 2011) 2011 HONDA ACCORD SEDAN EX, EX-L (2011, 2011) 2011 HONDA CIVIC SEDAN GX; W/REAR DRUMS (2011, 2011) 2012 ACURA TSX NO SUBMODEL ALL (2012, 2012) 2012 HONDA ACCORD COUPE EX, EX-L 4 CYLINDER OR EX-L V6 (2012, 2012) 2012 HONDA ACCORD EX, COUPE 2.4L (2012, 2012) 2012 HONDA ACCORD EX, COUPE 3.5L (2012, 2012) 2012 HONDA ACCORD EX, SEDAN 2.4L (2012, 2012) 2012 HONDA ACCORD EX, SEDAN 3.5L (2012, 2012) 2012 HONDA ACCORD SEDAN EX, EX-L (2012, 2012) 2013 ACURA TSX NO SUBMODEL ALL (2013, 2013) 2014 ACURA TSX NO SUBMODEL ALL (2014, 2014) [img-12121-left-large_default]

2 3 4 5 6

Find anything you need

Discovery Parts offers premium racing brake products only from top manufacturers.

Racing brake components ensure you have consistent and repeatable performance from white flag to checker.

Select your vehicle make below to see the best racing brakes for your car.