Chillout Systems
Chillout Systems Insulated Coolant Y-Hose (14ft)
$179.00
Chillout Systems Insulated Coolant Y-Hose
The Chillout Systems Insulated Coolant Y-Hose is made of insulated liquid-transfer tubes encased in an ultra-durable, tear-resistant fabric shield.
The primary end of the hose is 10 feet long, branching off into dual 4-foot hose ends that enable two cooling garments to be connected to one driver cooling unit with 1/4" fittings.
Hose too long for your set-up? It's easy to cut the hose to desired length and re-attach the end fittings. Chillout hoses comes with an extra supply of matching shrink wrap for a flawless, clean, and durable finish.
CHILLOUT SYSTEMS INSULATED COOLANT Y-HOSE DETAILS
Manufacturer: Chillout Systems
Manufacturer part no.: HYA-1
Double-insulation: one layer protects hoses and insulation, the other keeps coolant cold
Length: 14-feet overall
Male connectors: four
Female Dual-Prong connector: one
Additional heat shrink tubing for custom sizing while maintaining a finished look
Can be connected to other hoses including another Y-connector
Discovery Parts
HANS Device 24 Hour Express Recertification
$299.00
HANS Device 24 Hour Express Recertification
Did you wait until the very last second or forgot your HANS device's SFI 38.1 certification is about to expire? No problem! Get your HANS (Simpson or Stilo brand) device recertified in just 24 hours. Discovery Parts will perform a LEVEL 2 inspection and recertification and get your HANS shipped back to you via UPS Standard Overnight shipping (to the US lower 48 states).
Get the 24-Hour Express Recertification Form here
HANS DEVICE 24-HOUR RECERTIFICATION DETAILS
Manufacturer: Simpson/HANS/Stilo
SFI Spec: 38.1
Includes UPS Standard Overnight return shipping to the US lower 48 states
LEVEL 2 includes device inspection, replacement tether for standard post anchors, new SFI 38.1 certification sticker
LEVEL 2 QR includes device inspection, replacement tether for Quick Release post anchors, new SFI 38.1 certification sticker
Only for Simpson/Stilo HANS devices
Discovery Parts is certified by Simpson Racing / HANS to inspect and recertify all HANS devices that have a SFI 38.1 tag (silver metal foil decal) installed. All HANS SFI 38.1 devices must be recertified every five years.
RECERTIFICATION EXAMPLE
If, for instance, your device was last certified in April 2020, you'll need to get it recertified before May 1, 2025. Recertification typically consists of cleaning, damage inspection, and installation of a brand new tether system.
A HANS device passing inspection gets a new SFI 38.1 compliance sticker punched with the new date of certification. This device will now be valid for five years.
AN IMPORTANT NOTICE ABOUT OVERNIGHT SHIPPING
Discovery Parts guarantees that we will return your device via UPS standard overnight shipping. Be aware, however, that UPS does not guarantee next-day delivery and so we can't either.
Discovery Parts will ship your device on the next business day following receipt of the device at our shop.
TO GET YOUR HANS DEVICE EXPRESS RECERTIFIED:
Pay for your 24-Hour Express Recertification.
Print out and complete this form, being sure to put your 24-Hour Express Recertification order number on the form.
Pack your device and the completed form securely, and ship it insured and trackable to the address on the form.
We will inspect your device and recertify your HNR device. If there's any problem with recertifying it, we will notify you immediately.
Your recertified device will be shipped back to you via UPS Standard Overnight no later than the next business day following receipt at our shop.
Chillout Systems
Chillout Systems Pro Touring Cooling Shirt FIA / SFI
$700.00
Chillout Systems Pro Touring Cooling Shirt FIA/SFI
When the heat is on—literally—this is the cooling shirt that steps up. The Chillout Systems Pro Touring Cooling Shirt offers full-coverage performance cooling with professional-grade FIA and SFI approvals. Whether you’re running endurance races in brutal temps or hammering through back-to-back sessions, this shirt keeps your core cool, your mind sharp, and your focus laser-locked. It’s race-proven tech that goes under your suit but works overtime to keep you on top of your game.
Maximum Cooling Performance with FIA/SFI Approval
Features:
Superior Cooling Coverage: With up to 160 feet of precision-placed tubing, this shirt offers maximum body coverage for more effective core temperature regulation in the harshest racing conditions.
Contoured Fit for Optimal Contact: Designed to hug the torso like a second skin, ensuring the cooling veins stay flush with your body and don't shift while you drive. Better contact equals better cooling and less distraction.
Advanced 8-Circuit Cooling: Eight individual coolant circuits work in unison to eliminate hot spots and provide fast, balanced heat dissipation across your entire upper body.
Antimicrobial Construction: Woven with bacteria-fighting fibers that keep your shirt fresher for longer—even during multi-day race weekends. Certified safe and skin-friendly.
FIA & SFI Certified: Approved to FIA 8856-2018 and SFI 3.3 standards for professional use in sanctioned motorsport events.
Custom Fit Options: Choose the correct fitting option to match your cooling system. Sizes 3XL and above require an 8-week lead time due to custom production.
Chillout Systems Pro Touring Cooling Shirt FAQs:
Is this shirt compatible with all Chillout cooling systems? Yes, but you must select the proper fitting to match your system. Compatibility is system-dependent.
How long does it take to receive a 3XL or larger size? Larger sizes (3XL+) are made to order and require up to 8 weeks for production. These are not stocked items.
Can I use this cooling shirt without FIA/SFI certification? Yes, but the FIA/SFI approval means it's also safe and compliant for professional-level competition if needed.
Is this shirt machine washable? Hand washing is strongly recommended to preserve the tubing and antibacterial properties. Do not use fabric softener.
Stay cool and stay competitive with the Chillout Systems Pro Touring Cooling Shirt—because overheating should never be the reason you miss a podium.
OMP
OMP FIRST-S Driver Race Suit
$629.00
OMP FIRST-S Racing Driver Suit
FIA 8856-2018 Homologated
OMP's revised entry-level FIRST-S Racing suit is improved with all-new lightweight fabrics, while still maintaining its popular classic style. Its durable fire-retardant exterior is matched to a soft, knitted inner layer for improved comfort and durability. The high-quality Italian construction uses ultra-flat internal seams to prevent rubbing, and features an elastic knitted lower-back insert for improved comfort and mobility.
Lighter weight than previous versions of OMP's FIRST-S, the new design includes full-floating arms for greater freedom of movement, and modern "fishbone" quilting to match the driver's ergonomics in a seated position.
OMP FIRST-S Racing Driver Suit Protection Features:
Certified to FIA 8856-2018 homologation standard.
Lightweight and breathable two-layer suit
OMP FIRST-S Driver Race Suit Details:
Two-layer suit construction
Soft-knitted inner material
Floating arms with elastic bellows
Ultra-flat anti rubbing seams
Classic fit design
Weight: 385 g/m2
OMP
OMP Tecnica Hybrid Driver Race Suit
$929.00
OMP Tecnica Hybrid Driver Race Suit
The OMP Tecnica Hybrid is professional, high-spec, two-layer racing suit benefiting from traditional Nomex flame-retardant material paired with high tech printed inserts and additional embroidered details. The external layer of the OMP Tecnica Hybrid is a satin Nomex material giving the suit a modern look while the inner layer is soft knit Nomex for high levels of comfort. The suit is finished in vertical fishbone quilting with hidden side pockets. Available in a range of complimenting colors.
Floating sleeves with elastic bellows and a knitted elastic insert on the back give the driver maximum freedom of movement. A shaped collar lined with soft knitted fabric, an adjustable velcro belt, ultra-flat non-rubbing seams and a soft insert in the groin guarantee excellent comfort. Breathable inserts on the hips and under the sleeves let moisture escape.
OMP Tecnica Hybrid Racing Suit Details
Two-layer suit with 400 g/m² material weight
FIA 8856-2018 approved
Shiny outer Nomex material for superb looks
Soft knit Nomex lining material provides high levels of comfort
Breathable elasticated inserts on the lower back, hips, and sleeves vastly improve mobility and comfort
Ultra-flat, non-rubbing seams eliminate pressure points for an improved fit and feel
Fully-floating sleeves for less restrictive arm movements
Sparco
Sparco Martini Racing Nomex Glove (New)
$145.00
Sparco Martini Racing Land Nomex Glove (New)
In the golden years of rally racing, Sparco and Martini Racing contributed to the triumphs of the best drivers in the world. Now, with this renewed partnership, fans of the Martini Racing historical livery have access to reproductions of the original Sparco products. All reproductions have been updated with the newest Sparco technologies and carry current FIA homologations.
The Sparco Martini Racing Land glove provides excellent protection and feedback. The classic design features Martini Racing and Sparco logos in “period correct” embroidered patches. The palm features an ergonomic design with reinforced stitching that conforms to the hand’s position. The glove has anti-slip suede fingertips and provide grip and feedback. The elastic wrist and wide range of sizes helps ensure proper fitment. Colors: Navy or Red. The Martini Racing Land is FIA approved.
SPARCO MARTINI RACING GLOVE TECHNOLOGY
Period-correct embroidered Martini Racing patches
Ergonomic palm design with reinforced stitching conforms to the hand’s position
Suede grip for finger tips and palm
Elastic wrist support
FIA approved
Chillout Systems
Chillout Pro Sport Single Layer SFI Rated Balaclava
$79.00
CHILLOUT PRO SPORT SINGLE LAYER FIRE RESISTANT SFI RATED BALACLAVA
SFI ONLY!
The CHILLOUT PRO SPORT underlayers are turning the racing world on its head with the latest technology which will give you a performance advantage on the track. The Pro Sport flame and heat resistance underlayers are thermal regulating which can reduce your skin temperature by up to eight degrees which will quicken your reflexes and reaction time on the track.
The Ultralight weight materials prioritize airflow to help you regulate your body temperature during the heat of battle on the track. The Chillout Pro Sport underwear is the only SFI approved thermal regulating underlayers available on the planet to be sure you meet the most stringent homologation standards for your race sanctioning body. The Chillout Pro Sport underlayers sport antibacterial technology woven into every thread to neutralize 99% of bacteria to keep you fresh and focused on the track regardless of the length of your driving stint. If you are serious about winning, then you need the Chillout Pro Sport underlayers in your gear bag.
SFI Homologation Specification: 3.3
Sizes: ONE SIZE
Colors: BLACK, CHARCOAL, WHITE
Composition: 42% M-Aramide, 42% Viscose FR, 16% EA
PERFORMANCE CHILLOUT PRO SPORT UNDERLAYERS
SIZING AND USAGE CHILLOUT PRO SPORT UNDERWEAR
All users shall ensure that the Chillout Pro Sport garments are not too tight, as this reduces the level of protection, and that they are also comfortable to wear under the actual conditions of use.
Wearers are warned of the particular vulnerability of the neck, wrists, and ankles. The neck, wrist, and ankles shall always be covered by at least two articles of protective clothing.
The balaclava and top underlayers shall overlap by a minimum of 3cm / 1.2" around the driver's neck, except at the front center line where there shall be 8cm / 3.2" overlap. The top and bottom underlayers shall overlap by a minimum of 7cm / 2.8" around the drivers waist.
MAINTENANCE CHILLOUT PRO SPORT UNDERWEAR
Chillout PRO SPORT Flame Resistant underwear must be cleaned and ironed according to the instructions on the label and always to be handled with care. Drivers should replace any and all items as soon as they show signs of wear. Please note that the materials are light sensitive and should not be exposed to direct sunlight for a prolonged period of time. Sunlight especially can cause changes in the shade of colors and begin the premature aging of the materials.
CLEANING/MAINTENANCE CHILLOUT PRO SPORT UNDERLAYERS
The clothing items must be cleaned and ironed following the instructions provided on the label and handled with due care and attention at all times. Garments showing signs of wear should be replaced promptly. It is important to be aware that the materials used in the clothing are sensitive to light and should not be exposed to direct sunlight for prolonged periods. Exposure to sunlight can result in changes to the colors and premature aging of the materials. If your clothing sustains damage such as tears, abrasions, or exposure to heat and flames, it must be replaced. However, if minor tears can be repaired, the same materials and fabrics originally used in manufacturing must be utilized for the repair. Chillout Systems bears no responsibility for any damage incurred by users or third parties due to improper use, abuse, or incorrect maintenance of the clothing, including any improperly repaired garments.
EEC CERTIFICATION/GUARANTEE CHILLOUT PRO SPORT UNDERWEAR
Chillout Systems clothing is certified in compliance with Directive 89/686/EEC and the essential safety requirements outlined in Document II of the directive. Certification has been issued by CSI s.P.a.'s head office, a certified body of the European Commission (No. 0497), with additional production controls conducted by CSI s.P.a. itself.
Paragon
Paragon Blower Hose Fitting (4")
$30.99
Paragon 4.0" Blower Hose Fitting
Paragon’s 4” Blower Hose Fitting is custom made for connecting the Paragon 1.25” Air Hose to Paragon’s 240 CFM Air Blower.
Paragon
Paragon O-Ring Pack
$8.99
Paragon O-Ring Pack
The Paragon O-Ring Pack contains six new O-rings to replace a dry, cracked, or torn O-ring on any Paragon male connector.
Sabelt
Sabelt Hero Pro TB-10.1
$499.00
Sabelt Hero Pro TB-10.1
Hey track day titans and racing enthusiasts! Ready to step up your game? Slide into the Sabelt Hero Pro TB-10.1 Racing Shoes – where Italian craftsmanship meets the need for speed. These aren't just shoes; they're a statement of intent every time you hit the track.
SABELT HERO PRO TB 10.1 RACE SHOE FEATURES & BENEFITS
Ultrathin Kangaroo Leather: As sleek as your racing line. This top-quality leather isn't just lightweight; it's like a second skin, ensuring maximum comfort and breathability.
Soft Perforations & Honeycomb 3D Lining: Keep your cool when the heat is on. The perforations and innovative lining ensure your feet stay ventilated, even as the laps pile up.
Super Flexible Strobel Construction: Flexibility at its finest. This construction offers ultimate pedal sensibility, so you feel every shift, every move.
Ultra Flat Outer Sole: Feel the track beneath you. The new ultra-flat sole design enhances your connection with the pedals for precise control.
Removable Carbon Fiber Insole: Step into innovation. The carbon fiber insole, laminated in an autoclave, offers flexibility and a feather-light feel.
Anti-Abrasion Reinforcements: Tougher than your toughest competitor. These reinforcements protect your feet and ensure the shoes last longer than just a few victory laps.
Made in Italy: A touch of Italian flair. Because style matters, even when you're chasing the checkered flag.
SABELT HERO PRO TB 10.1 RACE SHOE SPECIFICATIONS
Material: Kangaroo leather, Honeycomb 3D lining, Natural rubber sole
Closure System: Aramidic laces
Features: Padded ankle and tongue, Removable carbon fiber insole, External reinforcements
Colors: Black, Blue, Red, White
Sizes: 36-48
SABELT HERO PRO TB 10.1 RACE SHOE FAQs:
Q: How do the Sabelt Hero Pro TB-10.1 shoes enhance my driving? A: With their ultra-sensitive soles and lightweight design, these shoes improve your pedal control, making every shift and acceleration more precise.
Q: Are these shoes suitable for long races? A: Absolutely! The breathable design and comfortable construction ensure your feet stay comfortable, even in the most grueling of endurance races.
Ready to take the wheel like a champion? Lace up a pair of Sabelt Hero Pro TB-10.1 Racing Shoes and feel the difference that professional-grade gear makes. Click 'Add to Cart' and step into the winner's circle. Your fastest lap is just a pair of shoes away!
Alpinestars
Alpinestars GP Tech v4 Fire Suit FIA
$1,799.95
Alpinestars GP Tech v4 Race Suit FIA
Hey speedster! Ever dreamt of suiting up in gear that makes you feel invincible on the track? Well, dream no more. Introducing the Alpinestars GP Tech V4 Fire Suit - where cutting-edge technology meets unparalleled comfort.
Alpinestars GP Tech V4 Race Suit Features & Benefits
Exclusive Outer Shell Material: Developed just for Alpinestars, this twill material isn't just about looking sleek. It's about giving you that edge.
Aramidic-Based Knit Lining: Imagine the comfort of your favorite pajamas but with the protection of a knight's armor. That's what this innovative lining offers. Plus, it's lightweight, so you won't feel like you're dragging a chainmail around the track.
Super Breathability: Thanks to the aramidic base lining with its open weave structure, you'll feel the breeze even when you're burning rubber. And with added breathable panels on the side, you'll stay cooler than the other side of the pillow.
Stretchable Panels: Strategically placed at the center back, lower back, elbow, crotch, and knee zone. Because who said you can't be flexible while going full throttle?
Advanced Three-Layer Construction: Ensures breathability, maximum comfort, and effective regulation of body temperature. It's like having a personal AC unit.
Anatomically Engineered Design: Pre-curved arms and legs mean you fit into this suit like a glove. Or, more accurately, it fits you.
Formula 1-Derived Stretch Panels: Located on the lumbar area, elbows, knees, and crotch for that extra oomph in flexibility.
Enhanced Breathability Areas: More ventilation because let's face it, racing is sweaty business.
All-New Extraction Handle: A safety feature straight from Formula 1. Because your safety is our top gear.
Lightweight Knitted Cuffs: For that snug feeling without the weight.
Soft Collar with Knit Fabric: No more scratchy necks. Just pure comfort.
Elastic Waist Construction: Because one size should fit YOU.
Printed Logos: Helps maintain the suit’s integrity and reduces weight. Plus, it looks pretty darn cool.
Premium YKK Metal Zipper: For when you need to get in and out in a flash.
Thigh Pockets: Because where else would you keep your secret racing snacks?
Athletic-Regular Fit Design: Look good. Feel good. Race even better.
Certified to FIA 8856-2018: Because we're all about keeping you safe in style.
ALPINESTARS GP TECH V4 AUTOR RACE SUIT FAQs:
What rating are FIA race suits? They are certified to the FIA 8856-2018 homologation standard.
Are racing suits fireproof? Absolutely! They're designed to protect you from fire hazards on the track.
How long do FIA race suits last? Typically, they have a life span of about 3-5 years, depending on usage.
What does FIA approved mean? It means the suit meets the strict safety and quality standards set by the Fédération Internationale de l'Automobile.
Can you wash a fireproof racing suit? Yes, but always follow the manufacturer's instructions to maintain its integrity.
What is the difference between FIA and SFI? Both are governing bodies that set safety standards, but FIA is international while SFI is primarily US-based.
What should I wear under my race suit? It's recommended to wear fire-resistant undergarments for added protection.
Ready to Unleash the Beast? Don't just be a racer; be a legend. Suit up in the Alpinestars GP Tech V4 Fire Suit and dominate the track.
Stilo
Stilo Carbon Peak Visors ST5 Helmets
$247.00
Stilo ST5 Carbon Peak Visors
Introducing the Stilo ST5 8860 Carbon Peak, the perfect accessory to enhance your racing experience. Designed as an optional extra for FIA8860 ST5 helmets, this peak is FIA approved and offers both style and functionality on the track. Similar to the bill of a ball cap, the ST5 Peak Visor by Stilo is effective at blocking the sunlight from your eyes. The peak visor can be adjusted to the angle of the sun throughout the day. Fitted for the SA2020 Stilo ST5 models, the ST5 peak is the perfect visor for keeping the sun out of your eyes.
Stilo ST5 Peak Visors Details:
Manufacturer: Stilo
Fits Stilo ST5: Yes
Stilo SKU YA0862 Gloss Carbon Fiber (FIA 8859 weave)
Stilo SKU YA0863 Gloss Carbon Fiber (FIA 8860 weave)
Chillout Systems
Chillout Systems 3" Air Duct Plenum
$48.00
Chillout Systems 3" Air Duct Plenum
Chillout Motorsports 3" Air Duct Plenum connects to your Cooling System, efficiently increasing cooling performance whilst simultaneously reducing amp draw from your electrical system.
The plenum is designed to fit the intake side of your Quantum Cooler, allowing for much cooler air to be forced through the system via the 3" duct. A 200 CFM blower (Minimum) is required in conjunction with the plenum for the best performance.The 3" Air Duct Plenum attaches via the plenum holder found on the front of the Quantum Cooler systems (V2 and above), creating a seal to keep the cooler pressurized with the cool air. Forcing cool air through the system and out through the exhaust side of the cooler is the most efficient way to reach maximum cooling - no wasted cool air, and the cooling shirt system appreciates every bit of cool air it can get.INCLUDED WITH THE CHILLOUT 3" PLENUM
3" Air Duct Plenum
Chillout Systems
Chillout Systems No Drip 1/4" Shirt Adapters
$105.00
Chillout Systems No Drip 1/4" Shirt Adapters
No Drip Adapters from Chillout Systems are designed to never leak and maximize the reliability of your driver cooling unit without the annoying "drip" when you disconnect.
Chillout Systems No Drip 1/4" Shirt Adapter Details
Manufacturer: ChillOut Systems
Manufacturer Part Number: CO-DLC-1
Works with other ¼" cooling shirts: Yes
Quantity: 4 Pieces (2 complete sets)
We have found in very long endurance races such as the World Racing league 24 Hours of Sebring, multiple driver changes have parasitic loss of fluid during the repetitious connecting of the drivers shirts. No Drip adapters also prevent unintentional release as the Shirt Adapters lock together, linking the hose to your system securely.
Sparco
Sparco RW-4 Nomex Balaclava
$79.00
Sparco RW-4 Nomex Balaclava
The RW-4 line of undergarments are designed to provide both comfort and protection. The RW-4 features a soft-touch interlock fabric. The hoods are one size fits all The RW-4 line is FIA 8856-2018 approved.SPARCO RW-4 NOMEX BALACALVA TECHNOLOGYSoft and comfortableRegular FitFIA 8856-2018 Approved
Racing Optics
Racing Optics (X-Stack) - Bell 287 SRV, SRV-8 and Roux R-1 Helmets
$36.95
Racing Optics (X-Stack) - Bell 287 SRV and Roux R-1 Helmet Shields
Racing Optics has the most optically advanced tearoff technology. 10 layer "distortion free" laminated tearoff system for the Bell 287, SRV-8 and Roux R-1 helmets. Protect your Bell or Roux Helmet shield from rocks, dirt, and debris and extend the life of your shield by drastically reducing pitting and scratches.
Racing Optics (X-Stack) - Bell 287 SRV and Roux R-1 Helmets Details:
Qty in one stack: 10
Thickness: 2 mil
Stacks in one package: 3
Post centers: 12 1/8"
Shape: Banana
Racing Optics (X-Stack) - Bell 287 SRV and Roux R-1 Helmets Fitment Guide:
Fits Bell:
Bell 287 SRV Shields
Bell GTX.2 Helmets
Bell GP.2 Helmets
Bell Star Infusion Helmets
Bell Dominator.2 Helmets
Bell M.8 Composite SA2015/SA2020
Bell M.8 Carbon SA2015/SA2020
Fits Roux:
R-1 Fiberglass
R-1 Composite
R-1 Gloss Carbon
R-1 Matte Carbon
Racing Optics is a laminated tear off solution for dirt and pavement forms of racing eliminating the need to apply individual tear offs. Racing Optics has the most optically advanced tearoff technology. 10 layer "distortion free" laminated tearoff system for the Bell 287 SRV and Roux R-1 shields. Protect your Bell and Roux Helmet shield from rocks, dirt, and debris and extend the life of your shield by drastically reducing pitting and scratches. For racers who prefer thinner tear offs, Racing Optics is available in X Stack (10 per stack) 2 mil with patterns specific to Bell Helmets including the GTX.2, GP.2, Star Infusion, Dominator.2, and all Roux R-1 helmets. Each sleeve comes with three stacks of 10 Racing Optics. (total of 30)
