Smart Products Filter Index - Do not delete

Call us any time at 888-748-7223 for Discovery Parts-Exclusive Forgeline pricing you won't find anywhere else! Discovery Parts offers FREE SHIPPING on all Forgeline Wheel Orders! FORGELINE GS1R (FIVE-LUG) Contact a wheel specialist today at 888-748-7223 to discuss the details of your custom Forgeline wheel build. We can guide you through sizing, offsets, finishes, and other details to make sure your Forgelines are perfectly suited to your needs! Designed for professional racing teams competing in the IMSA WeatherTech GS class, the Forgeline GS1R combines the latest in advanced wheel technologies: one-piece forged monoblock construction, motorsport engineered design, and I-beamed spokes. This wheel is engineered to withstand the rigors of top-level endurance racing with a 2100-lb. street tire load rating, exceptional deflection stiffness, and very light weight.Made from the same forgings and similar design as the popular GA1 street wheel, the GS1R has more material machined from the center area for additional weight reduction and improved access to the lugs. In combination with a new chamfered outer lip (with fewer sharp edges for easier handling), this open-lug design enables faster wheel changes and saves up to an additional pound of mass from each wheel.The GS1R is currently available in 17, 18, 19, and 20-inch diameters with a range of widths and offsets. And just like any Forgeline wheel, the GS1R is available with fully customizable finish options. FEATURES: One-Piece Forged 6061-T6 Monoblock Design Concave Profile I-Beamed Spoke Technology Extreme Stiffness Extreme Fatigue Strength 2100-lb. Street Tire Load Rating Light Weight (Up to One Pound Lighter Than The Standard GA1R) Generous Brake Clearance Open Lug Center Customizable Finish Options Legendary Forgeline Quality (Note: this wheel does not accept a center cap. It is recommended for track use only.)

Call us any time at 888-748-7223 for Discovery Parts-Exclusive Forgeline pricing you won't find anywhere else! Discovery Parts offers FREE SHIPPING on all Forgeline Wheel Orders! FORGELINE GA1R (CENTERLOCK) Contact a wheel specialist today at 888-748-7223 to discuss the details of your custom Forgeline wheel build. We can guide you through sizing, offsets, finishes, and other details to make sure your Forgelines are perfectly suited to your needs! The Forgeline GA1R is a fully-forged one-piece monoblock wheel that utilizes much of the technology and design of the very successful GA3R racing wheel, including Forgeline's exclusive I-Beamed Spoke technology. The concave design of the GA1R not only looks great but allows plenty of room for caliper clearance and extreme brake fitment, while the one-piece monoblock forging and I-beamed spoke design yield a wheel that is extremely stiff with fatigue strength equal to the proven GA3R. Yet despite the strength and stiffness, for most applications and sizes, it also delivers a high-performance weight reduction - making it perfect for motorsports and racing applications or the discerning street enthusiast who demands the ultimate in performance capability!The GA1R is designed for racing. It is engineered with a 2,100 lb. street-tire load rating (per wheel) to ensure strength and integrity, even when subjected to the massive loads encountered on the stickiest race tires.The GA1R is currently available in 18, 19, 20, and 21-inch sizes with a range of widths (6" to 15") and offsets. Just like any Forgeline wheel, the GA1R is available in thousands of fully customizable finish options. Also available with a knurled bead and TPMS. FEATURES: One-Piece Monoblock Design Concave Profile I-Beamed Spoke Technology Extreme Stiffness Extreme Fatigue Strength 2100 lb. Street-Tire Load Rating (per wheel) Lightweight Generous Brake Clearance Forged 6061-T6 Aluminum Customizable Finish Options Designed specifically for Porsche Center Lock Applications Legendary Forgeline Quality

Call us any time at 888-748-7223 for Discovery Parts-Exclusive Forgeline pricing you won't find anywhere else! Discovery Parts offers FREE SHIPPING on all Forgeline Wheel Orders! FORGELINE GE1R (PORSCHE CENTER LOCK) Contact a Forgeline specialist today at 888-748-7223 to discuss the details of your Forgeline wheel build. We will guide you through sizing, offsets, finishes, and other details to make sure your Forgelines are perfectly suited to your needs! FITS PORSCHE CENTER LOCK HUBS The eight-spoke center-locking Forgeline GE1R represents the absolute latest in advanced wheel technology, including one-piece forged monoblock construction, motorsport engineered design, and I-beamed spokes and spans. It combines head-turning good looks with race-ready strength and durability. The Forgeline GE1R is a fully-forged one-piece monoblock wheel that is 30% stiffer than the popular GS1R, minimizing wheel deflection under load for incredibly precise control. The concave eight-spoke design of the GE1R offers generous caliper clearance for large racing-brake fitments. Forgeline's computer-simulated FEA design process yields a wheel that is very lightweight and extremely stiff, with excellent fatigue strength. The GE1R is engineered exclusively for Porsche center lock applications such as the GT3 and GT3RS; it can be equipped with a special center lock to accommodate Porsche Cup Car and RSR hub assemblies. Available in 18, 19, 20, and 21-inch diameters, the GE1R is fully customizable with thousands of finish options! FEATURES: One-Piece Monoblock Forged 6061-T6 Construction Concave Profile Eight-Spoke Design Engineered for Porsche Center Lock Fitments I-Beamed Spoke Technology I-Beamed Spoke Spans Along the Lip Extremely Lightweight, Stiff, and Strong Generous Brake Caliper Clearance Accommodates Porsche Cup Car Pressure Washer and Hub Customizable Finish Options Legendary Forgeline Quality

Forgeline Shelby GT350/GT350R 19" Track Package Discovery Parts Makes Buying Forgelines Easy, Saving You Over $1,000 We've sold hundreds of Forgeline Competition Wheels to our customers wanting to hit the track. As a result we have optimized offsets, wheel sizes, brake and fender clearance, etc., for the awesome S550 Shelby GT350/GT350R. We've used that extensive experience to create a straightforward Track Package to take all the guesswork out of getting a second set of wheels. Simply choose your offset preference, choose your color, and we'll get your Forgeline wheels on their way.1 It's that easy. We spec all of our Forgelines with knurled beads to prevent tires moving around the wheels under heavy braking. Of course, if you prefer to talk to one of our Forgeline specialists, give us a call at 888-748-7223 and we can answer any questions you might have! INCLUDES: Two front and two rear Forgeline Competition Wheels, 11" x 19", with knurled beads, finished in any standard color. These can be made either with staggered front and rear offsets (similar to the OEM wheels), or "square" (all four wheels the same offset) with 25mm spacers and lug bolts for the front, allowing you to swap wheels front-to-rear and maximize tire longevity.   FORGELINE GS1R FOR MUSTANG GT350 AND 350R Originally designed for professional racing teams competing in the IMSA Continental Tire SportsCar Challenge Grand Sport (GS) class, the Forgeline GS1R is the product of the latest in advanced wheel technology, including one-piece forged monoblock construction, motorsport-engineered design, and I-beamed spokes. This wheel is engineered to withstand the rigors of top-level endurance racing with a 2,100 lbs. street tire load rating and exceptional deflection stiffness. Machined from a single forging of 6061-T6 aluminum, the GS1R employs an open-lug center area for additional weight reduction and improved access to the lugs. In combination with a new chamfered outer lip (with fewer sharp edges for easier handling), this enables faster wheel changes and, depending on size and offset, can save an additional pound of mass from each wheel!   FORGELINE GTD1 FOR MUSTANG GT350 AND 350R The Forgeline GTD1 5-Lug is a 10-spoke five-lug derivative of Forgeline's race-winning GTD1 wheel. The Forgeline GTD1 5-Lug combines the latest in advanced wheel technology, including one piece forged monoblock construction, motorsport engineered design, I-beamed spokes, and channelled spoke spans. This wheel is engineered to withstand the rigors of top-level endurance racing, delivering uncompromising strength and exceptional deflection stiffness. Made from the same forgings and similar in design to the centerlock GTD1 racing wheel, the GTD1 5-Lug wheel has been re-engineered with 10 spokes and an open lug center to reduce mass and enable easy access to the lug nuts. FORGELINE VX1R FOR MUSTANG GT350 AND 350R If you like the look of the popular VX1 but need a load rating suitable for dedicated track duty, then the VX1R was engineered for you! The VX1R is a full track-ready competition wheel equal in strength to our famous GA1R and GS1R Competition Series wheels. The VX1R features a sharp Y-spoke design (with long spokes that wrap around the lug holes), striking sharp angles, deep concave profile, and chamfered outer edge. The Forgeline VX1R is a fully-forged one-piece monoblock wheel that utilizes manufacturing technology similar to our very successful GA1R wheel. Beyond just beautiful style, the VX1R is engineered to allow plenty of room for caliper clearance and extreme brake fitment. And the one-piece monoblock forging and computer-simulated FEA design process yield a wheel that is lightweight, stiff, and has excellent fatigue strength.   Note 1: Forgeline Motorsport Series wheels are custom made to order; lead time is typically three to five weeks. However, Discovery Parts is the only dealer in the country that carries a significant inventory of popular Forgeline wheels. So give us a call to see if we have the wheels you're looking for in-stock for immediate shipping!      

CMS Performance Bolt In Roll Bar For BMW F87 M2 (2016-2021) This Roll Bar Fits the Following Cars: BMW M2 (N55) 2016-2018 BMW M2 Competition (S55) 2019-2020 BMW M2 CS 2020-2021 THE PREMIER BOLT-IN ROLL BAR FOR THE ICONIC M2 The CMS Performance Roll Bar is the strongest, safest, most beautifully constructed bolt-in roll bar on the market for the BMW M2, M2 Competition, and M2 CS. Engineered with a premium on safety and structural rigidity, the exceptional design integrates perfectly with the M2's luxury/sport interior. CMS uses only advanced Docol R8 Advanced High-Strength Steel tubing throughout each roll bar, giving you unequalled tensile strength and occupant protection. Docol R8 is 15% stronger than 4130 CrMo steel and 30% stronger than mild (DOM) steel used in other bolt-in roll bars. It is superior in every way: resistance to deformation, weld strength, and energy dissipation. Our one-piece main hoop with fully-integrated X-bracing and harness bar bolts directly to the chassis, forming the backbone of the CMS Performance Roll Bar. Rearward "kicker" supports are optimized for support in a roll-over event while maintaining an unobstructed rear view. The harness bar is specifically designed to locate racing harness shoulder straps at the proper angle (0 to -20 ) to the driver's shoulders regardless of seat position. The CMS Performance BMW M2 Roll Bar is designed to bolt directly to the M2 chassis strong points without the need for any modification of existing interior trim or use of backing plates. Adding a CMS custom designed rear seat delete gives the whole installation a clean, factory appearance. Full 360o TIG welding throughout gives the CMS Performance Roll Bar unsurpassed strength and durability. Each roll bar includes custom powder coating in your choice of matched M2 factory colors, satin black for a more stealthy appearance, or any of over 5,000 custom powder coat colors for a truly customized look. Our unwavering focus on using cutting-edge materials, unsurpassed design & construction, and premium fit & finish has taken CMS Performance Roll Bars to the top of the industry. The BMW M2 roll bar is the latest addition to our growing catalog, bringing safety, integrity, and beauty to customers taking their M2 to the track! Click Here for Installation Instructions CMS PERFORMANCE BMW F87 M2 ROLL BAR OPTIONS CMS premium Rear Seat Delete Kit is custom-designed for the F87 M2, giving your roll bar installation a factory-finished look. Schroth Profi II ASM four-point harnesses have a patented anti-submarine design to give you racing harness safety with your factory BMW seats. CMS Roll Bar Harness Collars help keep your shoulder straps safely and securely in place on the harness cross-bar. CMS PERFORMANCE BMW F87 M2 ROLL BAR DETAILS Manufacturer: CMS Performance Manufacturer part no.: CPRB-F87 Materials: Docol R8 Advanced High Strength Steel tubing 1.75 x 0.095; CNC-cut carbon steel mounting plates; CNC-machined solid steel interlocking roll bar joints Construction: full penetration 360º TIG welding Design features: one-piece main hoop for strength; three-piece kickers ease installation; allows full seat travel with virtually any seat Optional custom-designed rear seat delete All American-made Grade 8 hardware included Detailed installation instructions Installation requires removal of the factory rear seats. A rear seat delete kit is recommended but not required for roll bar installation. This product is intended for off-road use only.

IPD Intake Y-Pipe for Porsche 997.2 Turbo/Turbo S The revolutionary 997.2 Turbo IPD Y-Pipe was built for the most demanding Turbo performance customer. This is not a cast reproduction of the factory Y-pipe; it is a complete re-design from scratch, developed to deliver greater air flow for both stock and highly-modified Porsche 997.2 Turbo or Turbo S engines. The factory Y-pipe becomes restrictive when adding substantial power gains, particularly when you increase boost. The IPD Y-Pipe has larger inlets and a dimpled flow-optimized diversion area, removing the restrictions of the stock pipe. This superior more efficient design flows 126 CFM more than the factory Y-pipe delivering the additional capacity needed to raise the performance bar on the 997.2 Turbos. Bigger isn't always better, and the IPD Y-Pipe is designed to deliver optimum flow without being so large as to cause a loss in boost response. The IPD 997.2 Turbo Y-Pipe is designed to be a direct replacement of the factory OEM Y-Pipe. There are no modifications or fabrication required for installing the IPD Y-Pipe. This is an easy and straight forward bolt-on upgrade.

GET IT CUSTOM POWDER-COATED TO MAKE YOUR ENGINE BAY POP! The revolutionary 997.1 Turbo/Turbo S IPD Y-pipe was built for the more demanding Porsche Turbo performance customer. This is not a cast reproduction of the factory Y-pipe but a complete re-design from scratch, developed to deliver greater air flow for both stock and highly modified Turbos. The factory Y-pipe becomes restrictive when adding substantial power gains. The IPD Y-pipe has larger inlets and an optimized diversion area allowing for even greater power gains. This superior and more efficient design flows 126 CFM higher than the factory Y-pipe, delivering the additional power needed to raise the performance bar on any Turbo. Bigger isn t always better, and the IPD Y-pipe is designed to deliver optimum flow without being so large that it causes a loss in boost response. These Y-pipes can be custom powder coated in dozens of colors, ceramic coated, or polished to add drama to the aesthetic appeal of your Turbo engine. The IPD 997.1 Turbo/Turbo S Y-pipe is designed to be a direct replacement of the factory OEM Y-pipe. There are no modifications or fabrication required for installing the IPD Y-pipe. This is an easy and straight forward bolt on upgrade.

IPD Intake Y-Pipe for Porsche 991.1 Turbo/Turbo S The 991.1 (2014-16) 911 Turbo and Turbo S from Stuttgart offer ballistic acceleration and top speeds on either side of 200 mph. Of course, there's always room for performance improvement for Porsche driving enthusiasts looking to raise the performance bar even higher. IPD invested countless hours of R&D with a variety of unique design features and testing multiple prototypes before settling on the optimum design to significantly improve engine performance for both stock and highly modified 991.1 Turbos. Their innovative Y-Pipe design is not only larger but also utilizes non-round runners, an optimized merge collector area, and their proven dimpled interior surfacing. This superior design delivers greater volume of air, improved laminar flow, and increased air velocity, delivering an additional 35 horsepower and 40 lbs-ft of torque at the wheels! Plus improved boost response and more linear horsepower and torque curves. As you know, bigger is not always better when it comes to forced induction applications. The IPD Y-Pipe is considerably larger than the factory, but not so large as to cause pressure drop within the intake tract that could result in turbo lag and reduced performance. This optimized non-round design with dimpled interior surface cannot be achieved with conventional round tube construction. The 991.1 Turbo/Turbo S Y-Pipe is a direct bolt-on engine upgrade that requires no modifications but should be perform by an experienced Porsche technician familiar with the 991.1 platform. IPD Y-Pipe comes with all the required hardware necessary to complete the installation.

IPD Intake Plenum for Porsche 997.2 Turbo/Turbo S The incredible 997.2 Porsche Turbo and Turbo S received a completely redesigned engine with many substantial upgrades. At the time, they were the most powerful, revolutionary, and capable Porsche Turbos ever to come out of Stuttgart. The 997.2 Porsche Turbo may have been labeled a "facelift" but the engine was a major evolutionary leap forward in Porsche's coveted Turbo history. This seventh-generation Turbo engine, titled the 9A1, delivers 500 HP (530 HP in the "S") in stock trim. The 997.2 IPD Turbo plenum was considerably more difficult to design and develop than previous plenums. The good news is that all these efforts yielded a much easier installation process than previous Turbo plenums. The IPD 997.2 Turbo plenum is offered in a single version that utilizes the factory 74mm throttle body. The 997.2 Turbo intake manifolds are smaller than the 997.1 Turbo manifolds, which is great for improved boost response and gas mileage but less than ideal for making substantial power gains. The 74mm TB provides more than adequate flow for these more restrictive intake runners eliminating the need for a larger 82mm Competition version. The already explosive power of the 997.2 Turbo can be further increased with the new 997.2 Turbo IPD intake plenum. The patented IPD plenum design works exceptionally well with all forced induction applications, and the 997.2 Turbo is no exception. Power and torque increases provided by the IPD plenum are impressive and stay well above all factory power curves from launch to redline. Maximum power increases take place in the midrange where it's most needed and most enjoyed. The IPD 997.2 Turbo Plenum delivers smooth, linear power with considerably quicker boost response creating a broader, more desirable power band. The Turbo plenum gives reliable performance for both street and motorsport applications, enhancing the already visceral Porsche Turbo driving experience. Porsche's 997.2 Turbo ECU requires an adaptation period that can be fully realized with either a series of hard pulls on the dyno or a series of spirited driving sessions (which, of course, IPD recommends only be performed on a closed course circuit). Installation of all Turbo Plenums is highly recommended to be performed by qualified and trained Porsche technicians.

IPD Intake Plenum for Porsche 997.2 911 Carrera S (3.8L) Porsche DFI (Direct Fuel Injection) intake was a completely redesigned intake system developed to deliver improved performance, fuel consumption and lower emissions by optimizing the air fuel mixture directly inside the combustion chamber. The DFI Porsche engine package is a finely-tuned performance machine and additional power has proved difficult to find. The unique design of Porsche new DFI intake system posed challenging tuning hurdles but once again IPD developed a design that out-performs the factory intake system without compromising reliability and drive-ability. This innovative and revolutionary IPD DFI Intake Plenum employs the patented Y design as well as an enlarged plenum area that allows for improved intake air speed and velocity resulting in increased performance. The all new specifically designed IPD 3.8L DFI intake Plenum is a direct bolt-on upgrade that replaces the factory air intake distributor and utilizes all pre-existing factory hardware and throttle body. The improved IPD intake design allows for smoother, less turbulent and more efficient air flow resulting in impressive power and torque gains for Porsche driving enthusiasts. The superior design of the DFI IPD Plenum provides an additional 15 HP at the wheels. Unlike previous naturally aspirated IPD plenums that delivered stronger gains in the mid range, the new IPD DFI Plenums deliver a similar shaped power curve as the factory but is considerably stronger from the mid-RPMs to redline without any loses in power down low. Installation of the IPD 3.8L DFI Plenum is relatively straight forward and can be installed by mechanically inclined DIY customers, though IPD strongly recommends installation be performed by a trained and qualified Porsche technician.

IPD Plenum for Porsche 997.2 911 Carrera 3.6L Porsche DFI (Direct Fuel Injection) intake was a completely redesigned intake system developed to deliver improved performance, fuel consumption and lower emissions by optimizing the air fuel mixture directly inside the combustion chamber. The DFI Porsche engine package is a finely-tuned performance machine and additional power has proved difficult to find. The unique design of Porsche new DFI intake system posed challenging tuning hurdles but once again IPD developed a design that out-performs the factory intake system without compromising reliability and drive-ability. This innovative and revolutionary IPD DFI Intake Plenum employs the patented Y design as well as an enlarged plenum area that allows for improved intake air speed and velocity resulting in increased performance. The all new specifically designed IPD 3.6L DFI Intake Plenum is a direct bolt-on upgrade that replaces the factory air intake distributor and utilizes all pre-existing factory hardware and throttle body. The improved IPD intake design allows for smoother, less turbulent and more efficient air flow resulting in impressive power and torque gains for Porsche driving enthusiasts. The superior design of the DFI IPD Plenum provides an additional 14 HP at the wheels. Unlike previous naturally-aspirated IPD plenums that delivered stronger gains in the mid range, the new IPD DFI Plenums deliver a similar shaped power curve as the factory which is considerably stronger from the mid-RPMs to redline without any loses in power down low. Installation of the IPD 3.6L DFI Plenum is relatively straight forward and can be installed by mechanically inclined DIY customers, although IPD strongly recommends installation be performed by a trained and qualified Porsche technician.

IPD Plenum for Porsche 991.1 Turbo/Turbo S The incredible 991 Porsche Turbo received a completely redesigned exterior but the engine remained virtually identical to the previous model 997.2 Turbo. This latest Turbo is the most powerful, revolutionary and capable Porsche Turbo to ever come out of Stuttgart. This latest generation Turbo engine, titled the 9A1, delivers 520 HP (560 HP with the "S") and once again, raises the proverbial performance bar in the sports car world. The new 991 IPD Turbo Plenum is nearly identical to the previous 997.2 Turbo Plenums. The new IPD Turbo Plenum is offered in one single 74mm version which utilizes the factory 74mm throttle body. The 991 Turbo intake manifolds are smaller than the 997.1 Turbo manifolds which is great for improved boost response and gas mileage but less than ideal for making substantial power gains. The 74mm TB provides more than adequate flow for these more restrictive intake runners eliminating the need for a larger 82mm "Competition" version. The already explosive power of the 991 Turbo can be further increased with the new 991 Turbo IPD Intake Plenum. The patented IPD Plenum design works exceptionally well with all forced induction applications and the 991 Turbo is no exception. Power and torque increases provided by the IPD plenum are impressive and stay well above all factory power curves from launch to redline. Maximum power increases take place in the midrange where it's most needed, most critical and most enjoyed. The 991 Turbo plenums deliver smooth and linear power with considerably quicker boost response creating a longer and more desirable power band. The Turbo plenums deliver reliable performance for both street and motorsport applications enhancing the already visceral Porsche Turbo driving experience. The 991 Turbo requires an "adaptation" period that can be fully realized with either a series of hard pulls on the dyno or a series of spirited driving sessions, which of course IPD recommends only be performed on a closed course circuit. We recommend nstallation of all Turbo Plenums be performed by qualified and trained Porsche technicians.  

IPD Competition Plenum for Porsche 997.1 Carrera/Carrera S The IPD "Y" design plenum replaces the factory "T" style air distributor and provides substantial power and torque gains by means of a more efficient design. Horsepower gains range from 24 to 28 depending on engine displacement and engine condition. These max power gains are experienced in the mid range where is it most useable and enjoyed. The IPD plenum not only delivers impressive power and torque increases but also creates a more linear power and torque band. Tiptronic customers even claim considerable improvements with more positive shifting after installing the IPD Plenums. Porsche has been controlling engine output by restricting the inlet track for decades. This has been successfully accomplished by utilizing smaller throttle bodies. This simple power control solution has been a very effective way of preventing lower level models from out performing certain flagship models, especially models with prolific racing pedigree. Although the factory engine packages are fantastic performance machines, they are engineered and developed to achieve specific performance numbers that satisfy a target demographic and compete with rival brands. Unfortunately driving enthusiasts who seek an elevated Porsche driving experience require performance levels well outside the target market. IPD Plenums deliver substantial power and torque gains, but when combined with larger throttle bodies they perform even better. All of the IPD "Competition" Plenums utilize the next largest size throttle body offered by Porsche. In this case, the Competition Plenum does away with your original 74mm throttle body in favor of Porsche's 82mm 997 GT3 throttle body (can be added above). All of our Competition Plenums are designed to perform with cars equipped with high performance exhaust systems. The more extensive the exhaust system (headers, kats and mufflers) the better. Optimizing air intake and exhaust together creates a balanced performance package that allows the engine to inhale and exhale more air thus creating more power and torque. IPD has pioneered another new Plenum design with the Competition Carrera Plenum. Laminar flows and volumetric efficiencies have been further enhanced with our unique and innovative internal merge collector area. This completely new approach has yielded not only great performance gains but more linear power delivery and improved throttle response as well. Gains vary depending on pre-existing mods and quality of after-market exhaust installed. As we all "should" know, horsepower and torque become harder to find and typically more expensive as we climb the proverbial performance ladder. That being said, performance components yield different power gains depending on the order they were installed. IPD tests and evaluates all products on bone stock cars, this establishes a level playing field and a better "apples to apples" comparison. The Competition Carrera Plenum however is designed to work with applications that are already moderately to heavily modified. Power gains will vary with each Carrera, but the bottom line is, there will be noticeable and impressive gains that are sure to make any Porsche Carrera driving enthusiast smile. Power improvements will be fully realized once the factory ECU/DME makes all the necessary "adaptation" requirements. This process can be expedited with a series of "hard pulls" or spirited full throttle acceleration runs through the gears. Of course this should only be performed on a closed course circuit. This plenum requires a Bosch 82mm throttle body, which can be added to your order above for only $225 (save $100).

IPD Competiton Plenum for Porsche 987.2 DFI Boxster/Cayman Porsche's DFI (Direct Fuel Injection) intake in the 987.2 Boxster/Cayman (2009-2012) was a totally and completely redesigned intake system developed to improve performance, fuel consumption and emissions by optimizing the air fuel mixture directly inside the combustion chamber. The DFI Porsche engine package is a finely-tuned performance machine and additional power proved difficult to find. The unique design of Porsche's new DFI intake system posed very challenging tuning hurdles. As usual, however, Porsche left the door open for engine performance improvements with the 987.2 Boxster and Cayman. Porsche is famous for controlling Boxster and Cayman engine output by choking the inlet tract with a less-than-optimum throttle body. This has handicapped the smaller Porsches from treading on 911 Carrera territory. Once again, IPD developed a design that out-performs the factory intake system without compromising reliability and drive-ability, bringing the Cayman and Boxster much closer to the performance of the 911! This innovative and revolutionary IPD DFI Intake Plenum employs the patented "Y" design as well as an enlarged plenum area that allows for improved intake air speed and air velocity resulting in performance increases without any power losses. This plenum requires a Bosch 82mm throttle body, which can be added to your order above for only $225 (save $100).