Hyundai

Carbotech CT2212 Rear Brake Pads, 2019-2022 Veloster N, 2022+ Elantra N Carbotech CT2212 Rear Brake Pads, 2019-2022 Veloster N, 2022+ Elantra N Front Pad Set pads in 1521, AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer Part Number: CT2212 Carbotech Brake Compounds Carbotech 1521 The Carbotech 1521 is our high performance street compound. The 1521 compound is known for its release and modulation, along with unmatched rotor friendliness. 1521 is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech 1521 operating range starts out at ambient and goes up to 800 F (426 C+). 1521 is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotech 1521 is NOT recommended for ANY track use. Carbotech AX6 The AX6 is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6 for street driving as well, even though Carbotech doesn't recommend street driving with AX6 due to possible elevated levels of dust and noise. AX6 is NOT recommended as a race compound in most applications. Carbotech XP8 A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotech XP8 is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotech does NOT recommended XP8 as a daily driven street pad due to elevated levels of dust and noise. Carbotech XP8 is a great compound on the front & rear of most open wheel and sports racers. Carbotech XP10 When Carbotech unleashed the XP10 to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10 has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10 still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotech compounds so successful. Carbotech XP10 is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech XP12 Another highly successful XP series compound with an excellent initial bite, torque and fade resistance over and above the XP10 compound. XP12 has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12 has that excellent Carbotech release and modulation that has made all other Carbotech compounds so successful. The XP12 is more rotor aggressive than XP10 , but compared to the competition the XP12 is still very rotor friendly. XP12 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech XP20 The latest iteration of the highly successful XP series of compounds. XP20 is a step up from the highly successful XP16 compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20 is another major step in progression of the highly successful XP series line of compounds from Carbotech . XP20 has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotech XP20 maintains our tradition of having the outstanding release and modulation that has made all other Carbotech compounds so successful. Carbotech XP20 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech XP24 XP24 is the pinnacle compound of the extremely successful XP Series of compounds engineered by Carbotech . This compound is based on the same fundamentals that exist in all other Carbotech formulations. XP24 has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotech offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotech offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24 has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotech XP24 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotech RP2 The RP2 compound was engineered for endurance racing based on our highly successful XP Series formulations. RP2 has strong initial bite, a little less modulation than our XP12 , but still maintains the rotor friendliness of our XP series compounds. RP2 has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2 is as rotor friendly as our XP series compounds. Carbotech RP2 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech 913 Kelated Metallic A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotech Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F.

Carbotech CT2211 Front Brake Pads, 2019-2022 Veloster N, 2022+ Elantra N Carbotech CT2211 Front Brake Pads, 2019-2022 Veloster N, 2022+ Elantra N Front Pad Set pads in 1521, AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer Part Number: CT2211 Carbotech Brake Compounds Carbotech 1521 The Carbotech 1521 is our high performance street compound. The 1521 compound is known for its release and modulation, along with unmatched rotor friendliness. 1521 is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech 1521 operating range starts out at ambient and goes up to 800 F (426 C+). 1521 is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotech 1521 is NOT recommended for ANY track use. Carbotech AX6 The AX6 is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6 for street driving as well, even though Carbotech doesn't recommend street driving with AX6 due to possible elevated levels of dust and noise. AX6 is NOT recommended as a race compound in most applications. Carbotech XP8 A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotech XP8 is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotech does NOT recommended XP8 as a daily driven street pad due to elevated levels of dust and noise. Carbotech XP8 is a great compound on the front & rear of most open wheel and sports racers. Carbotech XP10 When Carbotech unleashed the XP10 to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10 has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10 still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotech compounds so successful. Carbotech XP10 is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech XP12 Another highly successful XP series compound with an excellent initial bite, torque and fade resistance over and above the XP10 compound. XP12 has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12 has that excellent Carbotech release and modulation that has made all other Carbotech compounds so successful. The XP12 is more rotor aggressive than XP10 , but compared to the competition the XP12 is still very rotor friendly. XP12 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech XP20 The latest iteration of the highly successful XP series of compounds. XP20 is a step up from the highly successful XP16 compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20 is another major step in progression of the highly successful XP series line of compounds from Carbotech . XP20 has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotech XP20 maintains our tradition of having the outstanding release and modulation that has made all other Carbotech compounds so successful. Carbotech XP20 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech XP24 XP24 is the pinnacle compound of the extremely successful XP Series of compounds engineered by Carbotech . This compound is based on the same fundamentals that exist in all other Carbotech formulations. XP24 has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotech offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotech offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24 has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotech XP24 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotech RP2 The RP2 compound was engineered for endurance racing based on our highly successful XP Series formulations. RP2 has strong initial bite, a little less modulation than our XP12 , but still maintains the rotor friendliness of our XP series compounds. RP2 has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2 is as rotor friendly as our XP series compounds. Carbotech RP2 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech 913 Kelated Metallic A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotech Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F.

These are replacement rings for A1-327 Hyundai N Girodisc Rotors. Our replacement rings are sold in pairs and include replacement hardware. The only parts you will reuse are your existing GiroDisc hats. Please note that unless specifically noted, GiroDisc replacement rings are only designed to work with GiroDisc hats. They are not designed to be used with other brands, including hats from cars equipped with 2-piece rotors from the factory.

FITMENTS (FRONT or REAR): Ferrari F430 Ferrari 360 Modena DiscoveryParts is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. These GiroDisc 2-piece rotors serve as direct replacements for the front rotors found on Hyundai Elantra N, Kona N, and i30 N models. Featuring fully floating assemblies, they effectively reduce unsprung weight and rotating mass on the vehicle's front axle. Crafted from a proprietary casting of high-carbon iron tailored to GiroDisc’s exacting standards, the rotor rings boast superior metallurgical properties, ensuring enhanced durability. The inclusion of 48 curved vanes acts as a centrifugal pump, drawing air in through the hub to facilitate efficient cooling during intense use. The 2-piece design incorporates a reusable hat, facilitating easy attachment to new rings (part number D1-327) when replacement is needed. All primary components, including hats, rotor rings, and drive pins, are meticulously manufactured in-house at our Bellingham, WA facility using domestically sourced materials. The hat is constructed from 6061-T6 aluminum and features a durable black anodized finish. Drive pins are crafted from a high-strength steel alloy and coated with cadmium for optimal corrosion resistance. Assembly includes spring clips and Belleville washers to ensure race-ready float while maintaining street-friendly noise levels without loose hardware. We recommend replacing the rotor rings when they reach a minimum thickness of 28mm or if a crack extends to the ring's edge. These rotors are sold and priced per pair.