Alpinestars
Alpinestars Tech-1 Start v4 Nomex Gloves
$134.95
Alpinestars Tech-1 Start v4 Nomex Gloves
Designed with a single upper panel and innovative finger construction, the Tech-1 Start v4 Gloves have been engineered to reduce the excess material in the fingers, as well as the total weight of the glove.
ALPINESTARS TECH-1 START V4 CONSTRUCTION AND FEATURES
Box cut fingertip construction offers a seamless no-fourchettes design on the ring and middle fingers, resulting in a glove which is anatomically optimized for a confined cockpit.
Ergonomically positioned silicon printed zones on palm for enhanced grip.
Close-fitting, straight, extended with elasticated wrist for easy entry and a secure fit.
Certified to FIA 8856-2018 homologation standard
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Stilo
Stilo ST5 Short Helmet Shields
$133.00
$206.00
Stilo Anti-Fog/Anti-Scratch Short Visor for the ST5 Helmet
Stilo ST5 short visors fit all Stilo SA2020, SA2015, FIA 8859/8860 non-ABP model helmets. Stilo visors are available in over 4 different colors in different levels of gradient to make sure you have the perfect shield for every race condition. From the Stilo dark smoke to a selection of multiple iridiums, Stilo ST5 visors are a great way to ensure your best vision and lap time.
Stilo ST5 GT Visor Part Number Chart:
YA0854 ST5 Mirror dark visor
YA0836 ST5 Iridium blue dark visor
YA0837.2 ST5 Iridium red dark visor
YA0838 ST5 Iridium yellow dark visor - Not FIA Certified
High quality, Anti-fog visors shaped for the Stilo ST5 GT helmets. The Stilo ST5 series is unique in that the shield lock is located in the center position of the shield. The shield lock is released by squeezing the outboard sides together and that will then release it from the mount stud that is located in the center of the helmet. The reason for this is to "clean-up" the sides of the helmet where a side impact in a head containment seat may grab parts of the helmet. All Stilo ST5 shilds have the center release mechanism installed on it.All Stilo ST5 shields are treated with an anti-fog treatment and they do require special care. The best result we have by far is the Stilo Visor cleaner. Liberally spray the outside of the visor with the cleaner, and wipe in a single swipe with a micro fiber towel until clean and dry. If fingerprints or dirt remain, repeat as needed. A back and forth wiping motion will tend to leave lint from the rag on the visor, so the single pass works best. Repeat if necessary, but usually one pass works great.Stilo Visor Care: Do not use Windex or any glass cleaner containing ammonia, as this can harm the anti-scratch coating on the outside of the visor, and the anti-fog coating on the inside of the visor. This is the official Stilo Visor Cleaner.
Trac-Com
Trac-Com Helmet Speaker Kit V2
$132.00
Trac-Com Helmet Speaker Kit V2
This helmet kit is designed for drivers looking to add integrated speakers and a microphone to their helmet. Designed in-house by RaceCom to be a universal solution, the Helmet Kit V2 is compatible with most motorsport helmets regardless the size and shape. The Instructor Helmet Kit includes the V2 Helmet Kit with an IMSA male cable end.What makes the V2 kit different? The new V2 helmet kit takes lessons learned from the V2 Student headset and applies them to bring you the loudest, most complete, highest quality universal helmet kit available. This kit features the brand new R7 digital mic and powerfully tuned speakers all built into a compact package that will easily install to almost any helmet quickly and comfortably.
TRAC COM HELMET SPEAKER KIT V2 FEATURES
Two powerfully tuned speakers
New R7 digital microphone
Male IMSA plug on headset
Strong, sturdy RaceCom cables have been pull-tested by a certified lab
Meticulous build process proven to outlast and outperform all others
TRAC COM HELMET SPEAKER KIT V2 INCLUDES:
Helmet Speaker Kit V2
Stilo
Stilo Communications Kits
from $131.00
Stilo Communications Kits
Discovery Parts does not recommend installing these kits without proper training and tools. Call us at (888) 748-7223 and we'll make arrangements for you to send your helmet to us for professional installation and/or retrofitting.
PLEASE NOTE: We will not warranty any Stilo communications kit that has not been professionally installed by our team of experts.
Stilo AE0210 Details:
Manufacturer: Stilo
Manufacturer part number: AE0210
Microphone: Yes, Gentex button shaped microphone that fits in chin bar of all Stilo Helmets
Speakers: Yes, mounted in noise reducing padded Stilo Ear Cups
Wiring protocol: Female IMSA (4C)
The Stilo AE0210 is easily the #1 Stilo electronics wiring kit. Fitting all Stilo GT helmets that have side ports, SA2020, FIA 8859, FIA 8860-2010 and FIA 8860-2018. The round, button microphone is placed into the factory installed hole in the chinbar padding and ear cups are placed into the recesses on each side of the helmet.
Stilo AE0214 Details:
Manufacturer: Stilo
Manufacturer part number: AE0214
Audio in: Earbud 3.5mm female jack
Microphone: Gentex button shaped microphone that fits in chin bar of all Stilo Helmets
Who would want the Stilo AE0214? Anyone with a Stilo helmet with custom earbuds that does not want the ear-cups installed. If you find ear cups uncomfortable and use ear buds, then the Stilo AE0214 electronics kit is for you. Audio In: This Stilo EarBud Rally electronics kit uses the Stilo 3.5mm female earbud jack. All audio will be played into your ear buds. Microphone: Your Stilo helmet has a female recess in the front chin bar to place a microphone. The Stilo EarBud Electronics gives you a microphone that fits into the recessed area of your Stilo chin bar.
Stilo AE0320 Details:
Manufacturer: Stilo
Manufacturer part number: AE0320
Audio in: Earcup and Earbud, both work at the same time
Audio out: Gentex flex boom microphone
Stilo description: Gen Boom, Speakers, Earbuds 3.5mm
What racers prefer the Stilo AE0320? Anyone with an extremely loud race engine. Some formula cars with the engine close to the driver or a ultra high compression race V8. If your car is very loud, or you went to too many Who concerts when you were younger, this is a great communication upgrade.Audio In: This Stilo Dual Rally electronics kit uses the proven Stilo powered ear cup audio electronics for each ear, but also lets you use your earbuds in addition. The audio will be played into both the ear cups and your earbuds at the same time. Microphone: Your Stilo helmet has a female recess in the cheek pad backing and front chin bar to place a noise canceling microphone. The Stilo Dual Rally & Ear Bud Electronics gives you a Gentex noise canceling microphone on a flex boom. You can place the microphone barely touching your upper lip and save your crew chiefs ears.
Stilo AE0216 Details:
Manufacturer: Stilo
Manufacturer part number: AE0216
Microphone: Gentex boom-mounted noise-canceling mic
Speakers: Mounted in noise reducing padded Stilo Ear Cups
The Stilo AE0216 wiring kit takes the proven ear cups from the AE0210 kit, but replaces the round button microphone with a boom microphone. The boom style microphone allows the driver to place the microphone barely touching their upper lip. This reduces ambient noise transmission through your radio system. This is a great choice for loud cars or anything with a straight cut gearbox.
Stilo AE0321 Details:
Manufacturer: Stilo
Manufacturer part number: AE0321
Wiring protocol: IMSA (4C)
Audio in: Earcup
Audio out: Gendex flex boom microphone
Stilo description: 4 Conductor, Gentex Boom Mic, Earcup Speakers and Earbud 3.5mm Jack
Who would want the Stilo AE0321? First you would have a Stilo Formula or Naked Helmet (no side ports), have a race car wired with IMSA communications and want the Stilo noise reduction ear cup communication. Some formula cars with the engine close to the driver or a ultra high compression race V8. If your car is very loud, or you went to too many Who concerts when you were younger, this is a great communication upgrade.Helmet connection: This Stilo cable uses an IMSA (4C) male plug attached to a coil cord to ensure there are no accidental disconnects. Audio In: This Stilo Ear Cup Electronics with Flex Mic and IMSA Coil Cord uses the proven Stilo earcup audio electronics to keep the race car out and the crew member in your ear. There is also a 3.5mm female jack for earbuds. The receiving audio will work through the ear cups or earbuds or both together. This is a proven race worth set-up. Microphone: Your Stilo helmet has a female recess in the front chin bar to to place a noise cancelling microphone, but the 0231 kit uses a Gentex noise cancelling microphone on the end of a flex-boom so you can place the microphone so it is barely touching you upper lip. This is popular in hi-speed formula cars, and extreme environments like Baja 1000, power boats, V8 SuperCars etc.
Stilo AE0322 Details:
Manufacturer: Stilo
Manufacturer part number: AE0322
Wiring protocol: NASCAR (3C)
Audio in: Earcup
Audio out: Gendex flex boom microphone
Stilo description: 3 Conductor, Gentex Boom Mic, Earcup Speakers and Earbud 3.5mm Jack
Who would want the Stilo AE0322? First you would have a Stilo Formula or Naked Helmet (no side ports), have a race car wired with NASCAR communications and want the Stilo noise reduction ear cup communication. Some formula cars with the engine close to the driver or a ultra high compression race V8. If your car is very loud, or you went to too many Who concerts when you were younger, this is a great communication upgrade.Helmet connection: This Stilo cable uses a NASCAR (3C) male plug attached to a coil cord to ensure there are no accidental disconnects. Audio In: This Stilo Ear Cup Electronics with Flex Mic and NASCAR Coil Cord uses the proven Stilo earcup audio electronics to keep the race car out and the crew member in your ear. There is also a 3.5mm female jack for earbuds. The receiving audio will work through the ear cups or earbuds or both together. This is a proven race worth set-up. Microphone: Your Stilo helmet has a female recess in the front chin bar to to place a noise canceling microphone, but the 0231 kit uses a Gentex noise canceling microphone on the end of a flex-boom so you can place the microphone so it is barely touching you upper lip. This is popular in hi-speed formula cars, and extreme environments like Baja 1000, power boats, V8 SuperCars etc.
Stilo SRO-9217 Kit Details:
Manufacturer: Stilo
Manufacturer part number: SRO-9217-KIT
Helmet Connection 1: Female IMSA connection to connect to the radio harness
Helmet Connection 2: Female 3.5mm connection to connect to earbuds
Microphone: Gentex noise canceling with flex boom
Earpad kit: 2 soft noise transparent earpads
If you run in the SRO GT World Series, GT America, GT4 or TC America series, the SRO 2022 rule book removed the legal use of your Stilo earcup communication kit. Our Stilo SRO-9217 kit makes converting your Stilo GT series helmet to the SRO rules fast and easy. We include a genuine Stilo Gentex Boom Mic w/ 3.5mm Earbud Connection and SRO legal ear pad kit.
While Stilo earcup communications are still allowed in IMSA, NASCAR, INDYCAR, F4, F3 and many other series, you will need to convert your Stilo GT series helmet to compete while driving in the SRO series. The Stilo SRO-9217 helmet electronic kit replaces your Stilo earcup kit with a Gentex flex boom microphone, 3.5mm earbud connection and soft earpads.
Stilo AE0217 Kit Details:
Manufacturer: Stilo
Manufacturer part number: AE0217
Helmet Connection 1: Female IMSA connection to connect to the radio harness
Helmet Connection 2: Female 3.5mm connection to connect to earbuds
Microphone: Gentex noise cancelling with flex boom
Stilo AE0217 is the helmet electronic kit that uses the female threaded receptacle, a Gentex flex boom microphone, and a 3.5mm earbud connection. If you are using your normal foam or custom earbuds and want a Gentex noise canceling microphone on a flex boom, this is your Stilo helmet wiring kit.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpinestars
Alpinestars Tech-1 Race v3 Nomex Gloves
$129.95
$159.95
Alpinestars Tech-1 Race v3 Nomex Gloves
Clearance Sale going on Now! Alpinestars continues to lead the market in design and technology. Offering increased levels of protection from the previous generation, the new Tech-1 Race v3 Glove has many features and benefits of a higher price point glove, such as pre-curved fingers and external palm seams to reduce pressure points.The new Alpinestars Tech-1 Race v3 racing glove has been designed to offer exceptional levels of feel, comfort and performance in an affordable glove. It features inside-stitched seams on all five fingers for superb comfort and durability.
Equipped with Alpinestars' open cuff design, the 180° elasticated wrist makes for easy entry in the pits and a secure fit in the car. Additional premium design touches include a silicon surface for improved flexibility and control, and pre-curved fingers to reduce fatigue while driving to maximize performance.
ALPINESTARS TECH-1 RACE V3 CONSTRUCTION
Flame resistant aramidic fiber main construction is bonded for optimum performance, comfort, and safety.
Combination of innovative materials and construction methods resuls in a significant weight reduction.
Full-gauntlet single panel top construction for maximum coverage.
Extended silicon printing on fingers and palm for improved grip and feel.
Pre-curved fingers and palm help reduce fatigue while driving.
ALPINESTARS TECH-1 RACE V3 GLOVE PROTECTION
Certified to the latest FIA 8856-2018 homologation standard.
Extended cuff length in accordance with new FIA standards for maximum protection against fire and heat.
ALPINESTARS TECH-1 RACE V3 GLOVE KEY FEATURES
Minimal-seam construction for enhanced comfort, feel, and weight-savings.
Alpinestars cuff opening design with a 180° elasticated wrist for easy entry/exit and a secure fit.
External super-lightweight printed design details for reduced weight.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
OMP
OMP ONE-S Nomex Gloves (Garage Sale)
$129.66
$189.00
OMP ONE-S Racing Gloves
FIA 8856-2018 HOMOLOGATED
Featuring freshly-redesigned graphics and the latest FIA 8856-2018 rating, OMP's restyled lightweight ONE-S Racing Gloves boast the ultra comfortable pre-curved design and external stitching that has made them one of our top sellers (and a staff favorite). Thin silicone inserts, re-engineered for better ergonomics, are printed directly onto the palm. OMP's diagonal cut gauntlet is a subtly great feature, giving the driver unobstructed performance. The strapless design uses an elastic wrist band for increased comfort and very easy on/off.
OMP ONE-S AUTO RACING GLOVE CONSTRUCTION
Palm has fire-retardant, silicon rubber inserts proven to give optimal grip and sensitivity.
Diagonal cut on the gauntlet and elastic band on the wrists.
External seams for maximum comfort.
Pre-curved design for optimal comfort.
Grip inserts are strategically located in order to decrease bunching.
OMP ONE-S AUTO RACING GLOVE PROTECTION
Certified to the new FIA 8856-2018 homologation standard.
Interior is sprayed with latex for improved grip and resistance.
Extended cuff length in accordance with new FIA homologation standards for maximum protection against fire and heat.
Sparco
Sparco Martini Vest
$129.00
Sparco Martini Vest
A lightweight layer that screams racing heritage
Pulling garage duty or making a pit lane appearance? The Sparco Martini Vest delivers a motorsport-inspired edge without weighing you down. Designed with Martini Racing livery and down-like insulation, this technical vest is your go-to layer for cooler track days or paddock strolls.
Sparco Martini Racing Vest Details
Motorsport styling with Martini Racing livery: Authentic embroidered logos and stripes make this vest a standout piece for fans of iconic racing history.
Lightweight insulation with weather protection: Water-resistant outer layer combined with softshell side panels and down-like polyester fill—ideal for chilly mornings at the track.
Smart pocket placement: External waterproof zipper pocket for quick access and an internal pocket on the left side to keep essentials secure.
Technical comfort: Polyester outer, nylon lining, and softshell flexibility let you move easily while staying warm and dry.
Sparco Martini Vest Specifications:
Outer: 100% matte polyester with TPU membrane
Side panels: knitted soft shell with TPU membrane
Lining: 100% nylon
Padding: 100% down-like polyester
External WR zip pocket
Internal left-side pocket
Sizes: Small to XXX-Large
Sparco Martini Vest FAQs:
Is the Sparco Martini Vest suitable for cold weather? It’s a lightweight vest with insulated fill and water resistance—perfect for cool mornings, but not a substitute for a full winter jacket.
Does the vest fit true to size? It fits close to the body for a tailored look. If you prefer extra room, consider sizing up.
Is the Martini Racing branding stitched or printed? All logos and stripes are fully embroidered for long-lasting quality and visual impact.
Can I layer it under a Sparco Martini Jacket? Yes! It’s slim enough to layer under other Martini Racing outerwear for extra warmth and style continuity.
Step into the spirit of Martini Racing—whether you're at the track or out for the weekend. The Sparco Martini Vest is the perfect blend of lightweight performance, heritage style, and daily wearability.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpinestars
Alpinestars Race v3 Nomex Fireproof Shirt (Discontinued Colors)
$129.00
$189.95
Alpinestars Race v3 Nomex Fireproof Shirt
This lightweight Nomex® undergarment gives you exceptional breathability and comfort, along with flame-resistant properties. The Race v3 Series Formula 1 specification tech base layer incorporates a relaxed fit for comfort when wearing under a driving suit.
ALPINESTARS RACE V3 NOMEX UNDERLAYER SHIRT CONSTRUCTION
Advanced tech base layer with Alpinestars innovative flame-resistant technology incorporating elastane fiber for improved engineered elasticity and high levels of comfort.
Stretchable construction under the new homologation standard requirements.
ALPINESTARS RACE V3 NOMEX UNDERLAYER SHIRT PROTECTION
Certified to the new FIA 8856-2018 homologation standard.
Lenzing FR® fire-resistant material
ALPINESTARS RACE V3 NOMEX UNDERLAYER SHIRT KEY FEATURES
Soft-touch textile for feel and enhanced comfort.
Lenzing FR® material is a natural viscose fiber with unique thermal insulation and flame resistance properties that help prevent heat stress.
Roux Helmets
Roux Radio - Drink Tube Connector Assembly NASCAR Plug
$129.00
Roux Radio / Drink Tube Connector Assembly NASCAR Plug
Connecting to the left side of your Roux helmet, the Roux NASCAR radio plug/drink tube connector attaches to your helmet with a slight push and releases quickly by pressing the red fast release push button on the Roux helmet connector assembly. This is the NASCAR protocol (3c) that is used in most older radio systems.
The drink tube is open ended to connect to your Longacre Drink Kit, Camelback or any other drink system you may use. The dry-break hidden inside the connector assembly guarantees a no-drip easy connection.
Roux Radio / Drink Tube Connector Assembly NASCAR Plug Details:
Manufacturer: Roux
Manufacturer part number: RXHA12-15
Radio protocol: NASCAR (longer and thinner than your Roux helmet)
Coil cord: Yes
Dry break included on drink connector: Yes
[img-6535-left-large_default]
Roux Helmets
Roux Radio - Drink Tube Connector Assembly IMSA Plug
$129.00
Roux Drink Tube Connector Assembly IMSA Plug
Connecting to the left side of your Roux helmet, the Roux IMSA radio plug/drink tube connector attaches to your helmet with a slight push and releases quickly by pressing the red fast release push button on the Roux helmet connector assembly. This is the IMSA protocol (4c) that is used in most modern radio systems.
Roux Drink Tube Connector Assembly IMSA Plug Details:
Manufacturer: Roux
Manufacturer part number: RXHA11-15
Radio protocol: IMSA (same as on your Roux helmet)
Coil cord: Yes
Dry break included on drink connector: Yes
The drink tube is open ended to connect to your Longacre Drink Kit, Camelback or any other drink system you may use. The dry-break hidden inside the connector assembly guarantees a no-drip easy connection.
OMP
OMP First Nomex Pants
$129.00
OMP First Nomex Pants
The OMP First Nomex Pant is a premium entry-level racing underlayer designed to provide drivers with essential fire-resistant protection while maximizing comfort and performance. Constructed from high-quality, flame-retardant Nomex® material, this FIA 8856-2018 certified top ensures superior safety in the most demanding racing conditions. The lightweight, breathable fabric offers excellent moisture-wicking properties, keeping drivers cool and dry during intense races. With a regular, ergonomic fit, the OMP First Nomex Top reduces bulk under race suits, allowing for full freedom of movement, making it a perfect choice for both professional and amateur drivers.
The OMP First Nomex pant is part of OMP’s trusted First Collection, combining advanced safety technology with a budget-friendly price point. Designed for compatibility with other OMP fire-resistant underwear and racewear, this top offers excellent value without compromising on safety or comfort. Whether you're preparing for your next track day or competing in high-level motorsports, the OMP First Nomex Pant provides the protection and performance you need to stay focused and secure on the track.
Entry level fire retardant underwear pant with flat seams, shaped neck and raglan sleeves to increase comfort. Regular fit.
OMP entry level fire retardant underwear pants with flat seams, tight ankle and elastic on waist to increase comfort. Regular fit.
FIA 8856-2018 Homologated
SFI 3.3 Homologated
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Walero
Walero Keep Your Cool Nomex Fireproof Shirt
from $129.00
$198.00
Walero Keep Your Cool Nomex Fireproof Shirt
Walero is committed to bringing you the most technologically-advanced range of thermo-regulating base layers available so you can stay committed to what matters most to you delivering your best performance.
Here why more and more drivers are choosing Walero:
Active Temperature Control
Developed by NASA for off-world applications, Outlast¬ technology actively regulates your body temperature despite changes in your environment, keeping you cool when the temperature rises or lessening the chill when it falls. This thermo-regulating know-how has been proven to effectively reduce perspiration by up to 33%.
Tailored for Comfort
Walero race underwear has been tailored for a superior fit with flat-lock seams and super-soft fabric to ensure maximum ease of movement and palpable comfort from start to finish.
Freshness Beyond the Finish Line
Treated with Envirotex, Walero next-to-skin base layers keep you fresher for longer meaning no more smelly kit bags either! This cutting-edge, hospital-grade antimicrobial is 99.999% effective against many common bacteria as well as many fungal spores and viruses, as well as being non-toxic and eco-friendly.
Protection When Needed
Ready to face the unexpected, Walero base layers are quality-assured and have been tested and approved to SFI 3.3, which means they are fully flame-retardant and fully approved for racing worldwide. The Protal FR material responsible for the fire protection doesn't wear out or expose your skin to chemical additives, and exceed the SFI test criteria.
WALERO NOMEX UNDERLAYER FEATURES:
SFI Approved Flame-Retardant underwear
Active temperature regulation
Treated with a cutting-edge antimicrobial
Supersoft material with flattlock seams
Paragon
Paragon Viking Cooler Mounting Tray
from $128.99
Paragon Viking Cooler Mounting Tray
Paragon’s Viking Cooler Mounting Tray is designed to provide a customized mounting option with protection for Paragon’s Viking and Viking Pro driver cooling systems. The Paragon Viking Cooler Mounting Tray includes two Viking tray straps that secure the cooler while allowing access to the interior without having to remove the cooler from the tray.
Made from a single sheet of steel and powder-coated black for durability. The Viking Cooler Mounting Tray is available to fit either the 12L or 18L Paragon Viking cooler.
Paragon Viking Cooler Mounting Tray Dimensions
Fits 18L cooler: 4 lbs., 16" x 10" x 6"
Fits 12L cooler: 3 lbs., 14" x 9" x 4"
Sparco
Sparco Martini Lady Hoodie
$125.00
Sparco Martini Lady Hoodie
Motorsport legacy, everyday comfort
This isn’t just a hoodie—it’s a motorsport statement piece. The Sparco Martini Lady Hoodie combines everyday comfort with the unmistakable legacy of Martini Racing. Whether you're trackside or just channeling race-day vibes, this ultra-soft, tailored hoodie delivers heritage and style in one iconic piece.
Sparco Martini Lady Hoodie Features
Tailored Fit for Women: Designed specifically for female racers and fans, the cut is athletic and flattering—just size up for comfort.
Authentic Martini Racing Style: Fully embroidered logo patches and Martini stripes pay tribute to one of racing’s most iconic liveries.
Soft Cotton-Blend Comfort: The polyester/cotton blend is soft and breathable, with a jersey-lined hood for extra coziness on cool days.
Two Colors Available: Choose between bright Celeste or crisp White to match your paddock vibe.
Sizes S–L: A streamlined fit that runs small. If you want a loose, baggy fit, go one size up for the perfect race-day feel.
Sparco Martini Lady Hoodie FAQs
Does the Sparco Martini Lady Hoodie run small? Yes, it runs smaller than standard U.S. sizing. We recommend going up one size for best fit.
Is this hoodie officially licensed? Yes, this hoodie is officially licensed and features authentic Martini Racing embroidery and branding.
Is the fabric heavy or lightweight? It has a medium-weight cotton/poly blend, ideal for layering or wearing on its own during mild to cool weather.
Are the logos printed or stitched? All logos and stripes are fully embroidered—not screen printed—giving it a high-quality, long-lasting finish.
Bring racing heritage into your everyday style with the Sparco Martini Lady Hoodie. Whether you're headed to the track or just living the racing lifestyle, this hoodie will turn heads wherever you go.
Sparco
Sparco RW-10 Seamless Nomex Balaclava
$125.00
Sparco RW-10 Seamless Nomex Balaclava
The Sparco RW-10 line of Nomex® undergarments is the lightest and most breathable on the market that is homologated to the new FIA 8856-2018 standard. When designing this new line of undergarments, Sparco studied the drivers seating position to ensure ultimate fit and comfort. The RW-10 features a fully seamless structure with ultra-soft stretchable material for a very comfortable fit.
The RW-10 balaclava is seamless, designed with no seams across the mouth and chin area for comfort when wearing a helmet. The traditional center seam across the front of the forehead has been removed to lessen any chances of pressure when wearing a helmet.
SPARCO RW-10 SEAMLESS NOMEX BALACLAVA TECHNOLOGY
FIA rating - FIA 8856-2018
Seamless stretchable Nomex in key areas for mobility
Designed for comfort in a driving position
Minimal external seams increase driver comfort
Sparco
Sparco Hydration Pack
$125.00
Sparco Hydration Pack
With temperatures that can reach 130o F in the cockpit of a race car, a driver can lose up to 10 pounds of fluid during a three-hour race. Dehydration can impair a driver’s ability to concentrate and focus during long stints. The Sparco Hydration Pack helps you stay hydrated in the race car to combat the negative effects of dehydration.
The Hydration Pack attaches to the back of any Sparco competition seat (and most non-Sparco seats). It features a specially designed insulated pouch that holds two liters of water. The drink tube can be attached to your shoulder harness to keep it properly located for easy access. It also features extra pockets for carrying small items.
FEATURES
Attaches to any Sparco competition seat, and most others
Insulated pouch holds 2 liters of liquid
Convenient drink tube clip
