Stilo
Stilo ST5 Top Ram Air Vent Kit
$52.53
Stilo ST5 Top Ram Air Vent Kit
Force cool air into your helmet with The Stilo ST5 Top Ram Air Vent Kit . Every formula car, open wheel and kart racer puts this hi-impact ABS clear ram air vent on. Does it work? Just jump out of the draft and feel the rush of cool air as you make that offline last corner pass.
Stilo ST5 Top Ram Air Vent Kit Details:
Manufacturer: Stilo
Manufacturer part number: YA0822
Qty in kit: two (sold as a pair)
Material: Impact Plastic
Attaches how: 3M VHB 2 Sided Tape
Fits all Stilo ST5 Helmets: Yes
Fits Stilo ST4 Helmets: No, Use Stilo YA0620 ST4 Ram Air Intake Kit
For those customers in open cockpit cars, some additional aerodynamics may be desired by the driver. We offer a Top air vent to help move the cool air into the helmet, a rear spoiler for stability and slight downforce, as well as a vent blockoff kit to allow for more control of the airflow inside the helmet.
All pieces are made of clear plastic, and easily adhere with double-sided adhesive tape (pre-installed).
Stilo
Stilo ST5 Front Spoiler Kit
$52.53
Stilo ST5 Front Spoiler Kit
For Open Cockpit Racers, The Stilo ST5 Front Spoiler stabilizes your helmet and stops buffeting and lifting at high speeds. Used in WKA kart racing to compensate for the extreme upright seats some kart racers have.
For those customers in open cockpit cars, some additional aerodynamics may be desired by the driver. We offer a front spoiler to help split air around the helmet. No more helmet lifting and instability under the highest speeds in a car with questionable driver aero.
All pieces are made of clear plastic, and adhere with double-sided adhesive tape.
Stilo ST5 Front Spoiler Kit Details:
Manufacturer: Stilo
Manufacturer part number: YA0823
Reduce Helmet Buffeting
Removable
Fits All Stilo ST5 Models
Can be painted
Roux Helmets
Roux Peak Visor White Fits Roux R-1 Helmets
$50.00
Roux Peak Visor White Fits Roux R-1 Helmets
Analogous to the brim of a hat, peak visors are designed to keep the sun out of your eyes. Roux peak visors will fit your your Roux R-1 Helmet perfectly.
Roux Peak Visor White, Fits Roux R-1 Helmets Details:
Manufacturer: Roux
Manufacturer part number: RXHS05-15G00
Color: Gloss White
Roux hardware kit ROU-RXHS07-15D is required to install this peak visor
Roux Helmets
Roux Peak Visor Silver Fits Roux R-1 Helmets
$50.00
Roux Peak Visor Silver Fits Roux R-1 Helmets
Analogous to the brim of a hat, peak visors are designed to keep the sun out of your eyes. Roux peak visors will fit your your Roux R-1 Helmet perfectly.
Roux Peak Visor Silver, Fits Roux R-1 Helmets Details:
Manufacturer: Roux
Manufacturer part number: RXHS05-15444
Color: Silver
Roux hardware kit ROU-RXHS07-15D is required to install this peak visor
[img-6519-left-large_default]
Rental
Daily Rental of HANS Device at AMP
from $50.00
Rent An Up-To-Date HANS Device Right At AMP!
Discovery Parts store in the AMP paddock carries a full complement of HANS devices to make sure every driver is safe out on the race track.
You can rent a HANS device for up to four days. Your rental is due back to Discovery Parts by 5pm on the final day of your rental.
Rental
Daily Rental of One Piece Race Suit at AMP
from $50.00
No Fire Suit? No Problem, We'll Rent You One!
Rent a one-piece, multi-layer SFI rated fire suit at the Discovery Parts store right in the Atlanta Motorsports Park paddock. Clean, comfortable, and professionally-maintained, our rental suits will keep you safe while you're out on the AMP race track.
Bell
BELL Cover plate & FORCED AIR low profile nozzle for HP6/GT6 helmet
$49.95
BELL Cover plate & FORCED AIR low profile nozzle for HP6/GT6 helmet
Kit consist of:1 Pcs FORCED LOW PROFILE NOZZLE (Clear)1 Pcs COVER PLATE2 Sets* SEAL KIT
*Each SEAL KIT set contains 2 pieces of 20 x 80mm and 2 pieces of 20 x 120mm.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Stilo
Stilo Pivot Kit ST5 Shield Only Gold
$49.95
$64.95
Stilo ST5 Shield Pivot Kit In Gold
Stilo ST5 replacement shield pivot kit for all Stilo ST5 helmets in gold. This is the same pivot kit that came standard on all Stilo ST5 Composite, Offshore, Carbon, 8860 and 8860 Zero helmets but with deep gold anodizing. Comprising of both the special Stilo knurled pivot screw and machined washer, this kit will stop the "drooping visor" that may happen after years of racing.
Stilo ST5 Pivot Kit For Shield Only in Gold Details:
Manufacturer: Stilo
Manufacturer part number: YA0817G
Fitment: Stilo ST5 all versions
Color: Gold
[img-10740-left-large_default]
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Stilo
Stilo Pivot Kit ST5 Shield Only Blue
$49.95
$64.95
Stilo ST5 Shield Pivot Kit In Blue
Stilo ST5 replacement shield pivot kit for all Stilo ST5 helmets in blue. This is the same pivot kit that comes standard on all Stilo ST5 Composite, Offshore, Carbon, 8860, and 8860 Zero helmets but with deep blue anodizing. Comprised of both the special Stilo knurled pivot screw and machined washer, this kit will stop the "drooping visor" that may happen after years of racing.
Stilo ST5 Pivot Kit For Shield Only in Blue Details:
Manufacturer: Stilo
Manufacturer part number: YA0817B
Fitment: Stilo ST5 all versions
Color: Blue
[img-10741-left-large_default]
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Stilo
Stilo Pivot Kit ST5 Shield Only Aluminum
$49.95
$64.95
Stilo ST5 Shield Pivot Kit In Aluminum
Stilo ST5 replacement shield pivot kit for all Stilo ST5 helmets in natural aluminum. This is the same pivot kit that came standard on all Stilo ST5 Composite, Offshore, Carbon, 8860 and 8860 Zero helmets. Comprising of both the special Stilo knurled pivot screw and machined washer, this kit will stop the "drooping visor" that may happen after years of racing.
Stilo ST5 Pivot Kit For Shield Only in Aluminum Details:
Manufacturer: Stilo
Manufacturer part number: YA0817
Fitment: Stilo ST5 all versions
Color: Natural Aluminum
Stilo
Stilo ST5 Side Air Kit
$49.95
Stilo ST5 Side Air Kit
Fresh air keeps you cool and keeps sweat from going into your eyes as you take the checkered flag. Endurance racers keep their focus high and lap times low by staying in the cool zone.
This side air kit allows you to connect a standard forced-air hose, typically used for top-air connections, to the side air connector on your Stilo helmet.
MUST BE USED IN CONJUCTION WITH SIDE AIR ADAPTER HOSE YA0639.
Stilo
Stilo ST5 Side Air Adapter Hose
$49.95
Stilo ST5 Side Air Adapter Hose
Fresh air keeps you cool and keeps sweat from going into your eyes as you take the checkered flag. Endurance racers keep their focus high and lap times low by staying in the cool zone.
This adapter hose allows you to connect a standard forced-air hose, typically used for top-air connections, to the side air connector on your Stilo helmet.
MUST BE USED IN CONJUCTION WITH SIDE AIR KIT YA0653.
Roux Helmets
Roux Top Forced Air Adapter
$49.00
Roux Top Forced Air Adapter
Now you can easily attach your helmet blower to your Roux Helmet with the Roux Helmet Top Forced Air Adapter. Easily install your helmet top air adapter with the enclosed mini-screws and enjoy a shield that never fogs and keeps your head even cooler. Roux top forced air adapter the lightweight and the prefect addition to your Roux helmet.
Roux Top Forced Air Adapter Details:
Manufacturer: Roux
Manufacturer part number: RXHI01-15888
Color: Clear
Screws included: Yes
Hose barb shape: Oval
[img-6514-left-large_default]
[img-6513-left-large_default]
Chillout Systems
Chillout Systems 3" Air Duct Plenum
$48.00
Chillout Systems 3" Air Duct Plenum
Chillout Motorsports 3" Air Duct Plenum connects to your Cooling System, efficiently increasing cooling performance whilst simultaneously reducing amp draw from your electrical system.
The plenum is designed to fit the intake side of your Quantum Cooler, allowing for much cooler air to be forced through the system via the 3" duct. A 200 CFM blower (Minimum) is required in conjunction with the plenum for the best performance.The 3" Air Duct Plenum attaches via the plenum holder found on the front of the Quantum Cooler systems (V2 and above), creating a seal to keep the cooler pressurized with the cool air. Forcing cool air through the system and out through the exhaust side of the cooler is the most efficient way to reach maximum cooling - no wasted cool air, and the cooling shirt system appreciates every bit of cool air it can get.INCLUDED WITH THE CHILLOUT 3" PLENUM
3" Air Duct Plenum
Racing Optics
Stilo Perimeter Seal Tearoff ST5 Thick 4mil
$46.95
Stilo ST5 Thick 4mil Perimeter Seal Tearoff Pack qty 9 (3 Sleeves of 3)
Protect Your Stilo ST5 Helmet Shield from rocks, dirt, and debris with these 4 mil thick tearoffs. Measuring 4 mil thickness (the most popular thickness for open cockpit and harsh environment racers), it is intended for road racing and/or dirt track use. The perimeter seal system used in these tearoffs provides a tighter fit against the visor, blocking out dirt, dust, and water from getting between the visor and tearoff stack. This package of 4 mil tear-offs are in 3 stacks of 3 per package (9 tear-offs in all). Now you can greatly extend the life of your Stilo ST5 shield by drastically reducing pitting and scratches.
Stilo 4 mil Perimeter Seal Tearoff Pack Quantity 9 (3 Sleeves of 3) Details:
Manufacturer: Stilo
Manufacturer part numbers: 3459CP
Thickness each: 4 mil
Gradient: Clear
Fits All Stilo ST5 Helmets: Yes
Fits All Stilo ST4F and Stilo ST4W Helmets: No
3 Stacks of 3 each
Note: This is the thicker of tearoffs (4 mil) for your Stilo ST5 series helmets. It is used primarily in Road Racing Open Cockpit or other harsh environment race tracks
NecksGen
Sparco Helmet kit AIR/SKY
$45.00
Replacement hardwares for our Air Pro and Sky RF full face helmets
Air/Sky Helmet Visor Fastener Kit by Sparco .This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship.Manufactured from industry-leading ...
Rigorously tested to withstand years of abuse
Built for maximum strength and endurance
Designed and manufactured using innovative technologies
