Auto Racing Driver Safety Gear at DiscoveryParts – Page 26

Stilo Stilo Pivot Kit ST5 Shield Only Gold $49.95 $64.95

Stilo ST5 Shield Pivot Kit In Gold Stilo ST5 replacement shield pivot kit for all Stilo ST5 helmets in gold. This is the same pivot kit that came standard on all Stilo ST5 Composite, Offshore, Carbon, 8860 and 8860 Zero helmets but with deep gold anodizing. Comprising of both the special Stilo knurled pivot screw and machined washer, this kit will stop the "drooping visor" that may happen after years of racing. Stilo ST5 Pivot Kit For Shield Only in Gold Details: Manufacturer: Stilo Manufacturer part number: YA0817G Fitment: Stilo ST5 all versions Color: Gold [img-10740-left-large_default]

-24% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Stilo Stilo Pivot Kit ST5 Shield Only Blue $49.95 $64.95

Stilo ST5 Shield Pivot Kit In Blue Stilo ST5 replacement shield pivot kit for all Stilo ST5 helmets in blue. This is the same pivot kit that comes standard on all Stilo ST5 Composite, Offshore, Carbon, 8860, and 8860 Zero helmets but with deep blue anodizing. Comprised of both the special Stilo knurled pivot screw and machined washer, this kit will stop the "drooping visor" that may happen after years of racing. Stilo ST5 Pivot Kit For Shield Only in Blue Details: Manufacturer: Stilo Manufacturer part number: YA0817B Fitment: Stilo ST5 all versions Color: Blue [img-10741-left-large_default]

-24% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Stilo Stilo Pivot Kit ST5 Shield Only Aluminum $49.95 $64.95

Stilo ST5 Shield Pivot Kit In Aluminum Stilo ST5 replacement shield pivot kit for all Stilo ST5 helmets in natural aluminum. This is the same pivot kit that came standard on all Stilo ST5 Composite, Offshore, Carbon, 8860 and 8860 Zero helmets. Comprising of both the special Stilo knurled pivot screw and machined washer, this kit will stop the "drooping visor" that may happen after years of racing. Stilo ST5 Pivot Kit For Shield Only in Aluminum Details: Manufacturer: Stilo Manufacturer part number: YA0817 Fitment: Stilo ST5 all versions Color: Natural Aluminum

-24% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Stilo Stilo ST5 Side Air Kit $49.95 $64.95

Stilo ST5 Side Air Kit Fresh air keeps you cool and keeps sweat from going into your eyes as you take the checkered flag. Endurance racers keep their focus high and lap times low by staying in the cool zone. This side air kit allows you to connect a standard forced-air hose, typically used for top-air connections, to the side air connector on your Stilo helmet. MUST BE USED IN CONJUCTION WITH SIDE AIR ADAPTER HOSE YA0639.

-24% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Stilo Stilo ST5 Hydration Kit $49.95 $64.95

Stilo ST5 Helmet Hydration Kit Hydration bite-valve kit designed specifically for the Stilo ST4 and ST5 helmet. KIT INCLUDES: (1) Male hydration connector (1) Female hydration connector (1) Hydration tube (1) Bite valve

-24% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Stilo Stilo ST5 Side Air Adapter Hose $49.95 $64.95

Stilo ST5 Side Air Adapter Hose Fresh air keeps you cool and keeps sweat from going into your eyes as you take the checkered flag. Endurance racers keep their focus high and lap times low by staying in the cool zone. This adapter hose allows you to connect a standard forced-air hose, typically used for top-air connections, to the side air connector on your Stilo helmet. MUST BE USED IN CONJUCTION WITH SIDE AIR KIT YA0653.

Coolshirt CoolShirt Lightweight Air Hose 1.5" ID x 8' $49.00

CoolShirt Lightweight Air Hose 1.5" ID x 8' CoolShirt Helmet Air Hose 1 ½” ID x 8’ is used to connect your helmet cooler to your helmet. Measuring 8 feet long with an inside diameter of 1.5", this easily connects your helmet blower or cooler output to your helmet. This CoolShirt Helmet Air Hose is a longer version of what is included in our CoolShirt Helmet Blower Systems with 135cfm and CoolShirt Helmet Blower Systems with 235cfm. If extra length of air hose is needed this is the CoolShirt Helmet Air Hose you need. CoolShirt Lightweight Air Hose 1.5" ID x 8' Details: Manufacturer: Coolshirt Manufacturer part numbers: 5013-0003 Manufacturer alternate part number: AIRH-8 Color: Black Hose ID: 1.5" Length: 8' Material: Lightweight Composite

Roux Helmets Roux Top Forced Air Adapter $49.00

Roux Top Forced Air Adapter Now you can easily attach your helmet blower to your Roux Helmet with the Roux Helmet Top Forced Air Adapter. Easily install your helmet top air adapter with the enclosed mini-screws and enjoy a shield that never fogs and keeps your head even cooler. Roux top forced air adapter the lightweight and the prefect addition to your Roux helmet. Roux Top Forced Air Adapter Details: Manufacturer: Roux Manufacturer part number: RXHI01-15888 Color: Clear Screws included: Yes Hose barb shape: Oval [img-6514-left-large_default] [img-6513-left-large_default]

-50% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Sabelt Sabelt Challenge TG-3 Nomex Gloves $49.00 $98.00

Sabelt Challenge TG-3 Nomex Gloves CLOSEOUT SALE - SAVE $$ FIA 8856-2000 Suede grip on fingers and palm

Sold out

Chillout Systems Chillout Systems 3" Air Duct Plenum $48.00

Chillout Motorsports 3" Air Duct Plenum connects to your Cooling System, efficiently increasing cooling performance whilst simultaneously reducing amp draw from your electrical system. The plenum is designed to fit the intake side of your Quantum Cooler, allowing for much cooler air to be forced through the system via the 3" duct. A 200 CFM blower (Minimum) is required in conjunction with the plenum for the best performance.The 3" Air Duct Plenum attaches via the plenum holder found on the front of the Quantum Cooler systems (V2 and above), creating a seal to keep the cooler pressurized with the cool air. Forcing cool air through the system and out through the exhaust side of the cooler is the most efficient way to reach maximum cooling - no wasted cool air, and the cooling shirt system appreciates every bit of cool air it can get.INCLUDED: 3" Air Duct Plenum

Racing Optics Stilo Perimeter Seal Tearoff ST5 Thick 4mil $46.95

Stilo ST5 Thick 4mil Perimeter Seal Tearoff Pack qty 9 (3 Sleeves of 3) Protect Your Stilo ST5 Helmet Shield from rocks, dirt, and debris with these 4 mil thick tearoffs. Measuring 4 mil thickness (the most popular thickness for open cockpit and harsh environment racers), it is intended for road racing and/or dirt track use. The perimeter seal system used in these tearoffs provides a tighter fit against the visor, blocking out dirt, dust, and water from getting between the visor and tearoff stack. This package of 4 mil tear-offs are in 3 stacks of 3 per package (9 tear-offs in all). Now you can greatly extend the life of your Stilo ST5 shield by drastically reducing pitting and scratches. Stilo 4 mil Perimeter Seal Tearoff Pack Quantity 9 (3 Sleeves of 3) Details: Manufacturer: Stilo Manufacturer part numbers: 3459CP Thickness each: 4 mil Gradient: Clear Fits All Stilo ST5 Helmets: Yes Fits All Stilo ST4F and Stilo ST4W Helmets: No 3 Stacks of 3 each Note: This is the thicker of tearoffs (4 mil) for your Stilo ST5 series helmets. It is used primarily in Road Racing Open Cockpit or other harsh environment race tracks

Racing Optics Stilo Perimeter Seal Tearoff ST5 Thin 2mil $46.95

Stilo ST5 Thin 2mil Perimeter Seal Tearoff Pack qty 30 (3 Sleeves of 10) Protect Your Stilo ST5 Helmet Shield From Rocks, Dirt, and Debris with these 2 mil thick tearoffs. Measuring 2 mil thickness (the most popular thickness for dirt track racers), it is intended for road racing and/or dirt track use. The perimeter seal system used in these tearoffs provides a tighter fit against the visor, blocking out dirt, dust, and water from getting between the visor and tearoff stack. This package of 2 mil tear-offs are in 3 stacks of 10 per package (30 tear-offs in all). Now you can greatly extend the life of your Stilo ST5 shield by drastically reducing pitting and scratches. Stilo ST5 2mm Perimeter Seal Tearoff Pack Quantity 30 (3 Sleeves of 10) Details: Manufacturer: Stilo Manufacturer part numbers:10259CP Thickness each: 2 mil Gradient: Clear Fits All Stilo ST5 Helmets: Yes Fits All Stilo ST4F and Stilo ST4W Helmets: No 3 Stacks of 10 tear-offs glued together Note: This is the thinner of tearoffs (2 mil) for your Stilo ST5 series helmets. It is used primarily in Dirt Track Racing where you need more pulls in a race

NecksGen Sparco Helmet kit AIR/SKY $45.00

Replacement hardwares for our Air Pro and Sky RF full face helmets Air/Sky Helmet Visor Fastener Kit by Sparco .This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship.Manufactured from industry-leading ... Rigorously tested to withstand years of abuse Built for maximum strength and endurance Designed and manufactured using innovative technologies

Coolshirt Coolshirt Safety-Pull Release Connectors $45.00

Two female dry quick-disconnects for any Coolshirt system water line. These are designed to disconnect in an emergency by the force of the driver pulling away from the lines. FEATURES 5/16" female connectors will work with your Coolshirt system (as well as some other cooling products) Sold as a pair

Racing Optics Racing Optics (X-Stack) - 2 mil Perimeter Seal Laminated Tearoffs XStack™ 10 (Clear) $43.95

The Perimeter Seal system is the latest technology from Racing Optics which allows for a tighter seal to visor, blocking out dirt, dust and water from behind the stack. The XStack™ is a stack of 10 laminated Tearoffs that are 2 mil thick each. The laminated technology creates a distortion-free optical lens. Each package contains 3 stacks of 10 Tearoffs for a total of 30 Tearoffs. Clear. Fits: (Bell: BR8, Dominator.2, GTX.2, GP.2, GP.2 Youth, M.8, 287 Shield, Star GP, Star Infusion) / (Zamp: FS-2, Z-15 Shield, Z-20 Shield, Z-70, FS1.2 RZ) / (RJS) / (G-Force: Revo, Rift, Rookie)

Find anything you need

Driver Gear