Ultimate Search - Do not delete

FITMENT (REAR): Ford GT Discovery Parts is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. This Girodisc system is an upgrade to a two-piece steel rotor and aluminum hat combination as a direct replacement for the OEM brake discs. The Girodisc floating rotors will bolt directly to your Mustang and work flawlessly with OEM calipers. By upgrading your brakes with these lightweight high-performance replacements, as opposed to a big brake kit, your factory bias is maintained as well as your ABS effectiveness and efficiency. These 20-lb. Girodisc rotors are lighter than OEM pieces, resulting in a reduction in rotational and unsprung weight allowing for quicker acceleration, stronger braking, and faster suspension response. When used with Pagid or PFC performance brake pads, and Discovery Parts RF-1 brake fluid, you have the best possible solution to overheating, cracking, and warping rotors. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling. Sold/priced per pair.

Discovery Parts is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. Fits Ford GT This Girodisc system is an upgrade to a two-piece steel rotor and aluminum hat combination as a direct replacement for the OEM brake discs. The Girodisc floating rotors will bolt directly to your Mustang and work flawlessly with OEM calipers. By upgrading your brakes with these lightweight high-performance replacements, as opposed to a big brake kit, your factory bias is maintained as well as your ABS effectiveness and efficiency. These 20-lb. Girodisc rotors are lighter than OEM pieces, resulting in a reduction in rotational and unsprung weight allowing for quicker acceleration, stronger braking, and faster suspension response. When used with Pagid or PFC performance brake pads, and Discovery Parts RF-1 brake fluid, you have the best possible solution to overheating, cracking, and warping rotors. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling. Sold/priced per pair.

FITMENT (FRONT): Ford Mustang FR500S Discovery Parts is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. This Girodisc system is an upgrade to a two-piece steel rotor and aluminum hat combination as a direct replacement for the OEM brake discs. The Girodisc floating rotors will bolt directly to your Mustang and work flawlessly with OEM calipers. By upgrading your brakes with these lightweight high-performance replacements, as opposed to a big brake kit, your factory bias is maintained as well as your ABS effectiveness and efficiency. The Girodisc rotors are lighter than OEM pieces, resuutling in a reduction in rotational and unsprung weight (4 lbs per corner) allowing for quicker acceleration, stronger braking, and faster suspension response. When used with Pagid or PFC performance brake pads, and Discovery Parts RF-1 brake fluid, you have the best possible solution to overheating, cracking, and warping rotors. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling. Sold/priced per pair.

Sparco Racing Seats ADV Elite Carbon Seat The Sparco ADV Elite Carbon is an extremely strong, ultra-light weight carbon fiber seat designed to pass the FIA’s highest seat rating FIA 8862-2009. This means that the Sparco ADV Elite Carbon seat has been tested to an impact of approximately 70G. This rating is required for WRC racing, and the Sparco ADV Elite Carbon seat was specially designed with an upright driving position preferred by Rally drivers. In addition to the Rally driving position, the outer dimensions have been reduced to fit into typically smaller WRC cockpits. With strength at the top of its class, the Sparco ADV Elite carbon seat can withstand over 6,600 lbs. of lateral force. The Sparco ADV Elite carbon seat has an energy absorbing system in the areas subjected to the highest stress to protect the driver. The entire seat is covered in self-extinguishing fabric and special non-slip fabric in the shoulders and seat area. The Sparco ADV Elite carbon seat is FIA approved when mounted with the Sparco #004988ADV side-mount brackets. Sparco Racing Seats ADV Elite Carbon TECHNOLOGY Ultra-light weight Carbon Fiber construction FIA 8862-2009 approved Testing to an impact of 70G Designed for WRC Rally cockpits & driver position Hans device compatible Fire retardant fabric Special non-slip fabric Sparco Racing Seats ADV Elite Carbon DIMENSIONS

C3 Carbon Ferrari 488 GTB Carbon Fiber Engine Surrounds Stunning carbon fiber engine cover panels are an excellent upgrade for your 488 GTB! Ferrari displays the gorgeous 488 GTB V8 engine under a glass bonnet, but the stock flat-black plastic engine covers are a significant let down. C3 Carbon uses ultra-precise CNC-machined billet moulds to create incredible pre-impregnated (pre-preg) dry carbon fiber replacements with quality, fit, and finish equaling the incredibly expensive factory Ferrari carbon pieces! C3 matches the traditional Ferrari 1x1 3K plain weave to duplicate factory-original appearance and craftsmanship, but at a reasonable price. Straightforward installation makes this a favorite our 488 GTB customers. For the complete carbon treatment for your whole 488 GTB engine room, see our Complete 488 Engine Kit. FITS: 2016+ Ferrari F488 GTB Coupe (for Spider, click here). FEATURES: Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matches Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

The D2-145 is the replacement rotor ring kit for the Girodisc A2-145 two-piece steel rotor and aluminum hat combination. It includes all necessary hardware to replace both rear rotor rings. We recommend using the Pagid 2487 racing brake pad with this Girodisc system. As an authorized Girodisc dealer with one of the largest inventories in the country, we ship products within one business day to ensure we meet your delivery deadline. CONTAINS TWO REPLACEMENT ROTOR RINGS AND ASSOCIATED HARDWARE.

COBB Tuning Accessport V3 for Porsche 991.1 Turbo/Turbo S The COBB Accessport V3 is the world's best-selling, most flexible ECU upgrade solution for all turbocharged Porsche 991 Carrera models. Unlock power and torque masked by Porsche's conservative, one-size-fits-all factory ECU tuning by choosing and downloading COBB's more aggressive calibrations and mapping. Easily upgrade forever as you add future modifications to your engine with COBB's off-the-shelf (OTS) calibrations professionally designed for most of the popular bolt-on Porsche modifications. It's truly the last engine management solution you'll ever need! Once you receive your Accessport, you just download the tuned map(s) of your choice from COBB's customer website, then upload them to your car's ECU via the OBD2 port. It's simple and easy, requiring only about 20 minutes! You can also save your original factory tune so you can change the ECU back to 100% stock anytime. COBB OTS MAPS Stage1 maps are designed for a stock engine configuration, stock airbox, and stock exhaust. Stage 2 maps are designed for a high-flow exhaust and cats, with an otherwise-stock engine, airbox, and filter. Stage 3 maps designed for a high-flow exhaust, thicker core intercoolers, and upgraded intake such as the IPD Competiton Plenum and Y-Pipe. Each stage includes a 100-octane map for those times on the street or the track when you really (really) want to get down the road! (We use Race Gas in our race cars. It chemically reformulates pump gas to match 100-octane racing fuel!) The Accessport V3 has a large, full color, higher resolution TFT screen that allows you to monitor up to six parameters in real time. Fully customizable look (multiple bezel colors and styles are available), layout (set up a race, street or dyno gauge cluster) and mounting options (choose from dozens of standard vehicle mounts). Of course, a full range of unparalleled COBB tuning is included, with enough space for 100 calibrations! This is your new Accessport - the last tuning device you'll ever need. Warning! Installation of this Accessport over anything other than OEM or COBB software may result in ECU/TCU failure. Please contact COBB Support if you have any questions. CONFIRMED APPLICATIONS: 2014-2016 Porsche 911 (991) Turbo PDK 2014-2016 Porsche 911 (991) Turbo S PDK COBB TUNING DYNO GRAPHS FOR ACCESSPORT V3:

COBB Tuning Accessport V3 for 987.2 Cayman S/Boxster S The COBB Accessport V3 is the world's best-selling, most flexible ECU upgrade solution for the Porsche 987.2. Unlock power and torque masked by Porsche's conservative, one-size-fits-all factory ECU tuning by choosing and downloading COBB's more aggressive calibrations and mapping. Easily upgrade forever as you add future modifications to your engine with COBB's off-the-shelf (OTS) calibrations professionally designed for most of the popular bolt-on Porsche modifications. It's truly the last engine management solution you'll ever need! Once you receive your Accessport, you just download the tuned map(s) of your choice from COBB's customer website, then upload them to your car's ECU via the OBD2 port. It's simple and easy, requiring only about 20 minutes! You can also save your original factory tune so you can change the ECU back to 100% stock anytime. Warning! Installation of this Accessport over anything other than OEM or COBB software may result in ECU/TCU failure. Please contact us at 888-748-7223 if you have questions. Stage1 maps are designed for a stock engine configuration. Stage2 maps are designed for the addition of aftermarket high-flowing headers. Both Stage1 and Stage2 are designed to work well with the popular IPD Competition Plenum and throttle body upgrade. The Stage2, in particular, is a fantastic upgrade to stock! The in-cabin mountable Accessport V3 has a large, full color, higher resolution TFT screen that allows you to monitor up to six parameters in real time. Fully customizable look (multiple bezel colors and styles are available), layout (set up a race, street or dyno gauge cluster) and mounting options (choose from hundreds of standard vehicle mounts). Of course, a full range of unparalleled COBB tuning is included, with enough space for 100 calibrations! This is your new Accessport - the last tuning device you'll ever need. SUPPORTED VEHICLES: BOXSTER: 2009-2012 Porsche Boxster S (987.2) MT, PDK 2011-2012 Porsche Boxster Spyder (987.2) MT, PDK CAYMAN: 2009-2012 Porsche Cayman S (987.2) MT, PDK 2011-2012 Porsche Cayman R (987.2) MT, PDK FEATURES: Large, full color, higher resolution screen Customizable multi-gauge display In vehicle mount, with on/off switch User-customizable start-up screen Interchangeable faceplates

One pair of Girodisc 380mm steel replacement rotor rings for the Girodisc A2-155 two-piece floating rotor system for the Porsche 981 Cayman GT4 with steel brakes. Includes all necessary hardware to safely replace both worn rotor rings. INCLUDES TWO REPLACEMENT ROTOR RINGS AND ASSOCIATED HARDWARE.

C3 Carbon Ferrari F12 Carbon Fiber Rear Spoiler Upgrade your F12's rear end with an autoclaved, pre-impregnated (pre-preg) dry carbon fiber rear spoiler from C3 Carbon. C3 matches the factory 1x1 3K plain weave for an original Ferrari appearance; meticulously hand-laid, C3 Carbon gives you the luxurious look of carbon at a fraction of the Ferrari price. The C3 carbon rear spoiler is fully functional, installs easily, and dramatically upgrades the look of your F12 Berlinetta! FITS Ferrari F12 Berlinetta FEATURES: Autoclaved pre-preg dry carbon fiber with 1x1 3K plain weave matched to Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs easily without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

AiM SmartyCam GP HD Suction Mount This adjustable mount holds your AiM SmartyCam GP HD Rev 2.2 securely to your windshield, allowing you to quickly mount your camera and keep it pointed in the right direction during races, track days, and other driving events. Two pivoting ball joints allow a wide range of adjustment, and the 3 1/2" diameter lever-actuated suction cup base works on any smooth, clean, flat surface. The machined aluminum collar accepts a lipstick-type camera measuring 24mm (0.94") OD. You can also eliminate the collar to mount a lightweight, compact camera with a standard 1/4-20 tripod mount (including SmartyCam and SmartyCam HD). KIT INCLUDES: Suction cup base Lower ball clamp 60mm clamp arm Top ball with 1/4-20 mounting stud Machined collar

C3 Carbon Ferrari 488 Spider Carbon Fiber Engine Bay Stunning carbon fiber engine bay trim panels are a spectacular upgrade for your 488 Spider! Ferrari displays the 488 Spider's beautiful turbocharged V8 engine under a glass bonnet, but the stock flat-black plastic engine trim is a significant let down. C3 Carbon uses an autoclave to mould pre-impregnated (pre-preg) dry carbon fiber replacements with quality, fit, and finish that rival the factory carbon upgrade (for which Ferrari charges a fortune), bringing the 488 Spider engine room up to standard! C3 matches the traditional Ferrari 1x1 3K plain weave to duplicate factory-original quality and craftsmanship at a fraction of the factory cost. Straightforward installation makes this a very popular upgrade for our 488 Spider customers. FITS: 2016+ Ferrari F488 Spider FEATURES: Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matches Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari 458 Carbon Fiber Side Skirts Made from aerospace-grade autoclaved dry carbon fiber and matched to the Ferrari factory's signature 1x1 3K plain weave pattern, these side skirts are a perfect match to the stunning carbon fiber on the 458. Ferrari can add them to your 458 build at the factory...for $9,000! You can easily install them yourself using only hand tools for a fraction of the factory cost, without sacrificing even the smallest bit of fitment, finish, or quality. Unlike many other brands, these are not carbon overlaid on fiberglass. C3 uses only 100% hand-laid pre-preg dry carbon fiber, formed in the autoclave at high pressure and temperature using billet aluminum molds. These Ferrari carbon fiber side skirts were originally developed using highly innovative fluid dynamics techniques and perfected in the wind tunnel in order to optimize the 458's aerodynamics. The lateral plane on each skirt plays a crucial role in reducing high-speed lift by minimizing air flowing from the side of the car into the underside. C3 Carbon's carbon fiber combines cosmetic appeal with outstanding technical performance, reducing the total weight of the car in the process. FEATURES: Autoclaved pre-preg dry carbon fiber construction with 1x1 3K plain weave matching factory Ferrari carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari 458 Carbon Fiber Fuel Door Upgrade the factory painted fuel door cover on your Ferrari 458 with a C3 carbon fiber cover! Made from aerospace-grade autoclaved dry carbon fiber, matched to Ferrari's traditional 1x1 3K plain weave pattern, it's a perfect match to the rest of the carbon on your 458. Installs easily in minutes. FEATURES: Autoclaved pre-preg dry carbon fiber construction with 1x1 3k plain weave matching OEM Ferrari carbon fiber Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari 488 GTB/Spider Carbon Fiber Front Trunk C3 uses digital 3D laser scanning to ensure that their autoclaved, pre-impregnated (pre-preg) dry carbon fiber front trunk panels fit and function as perfectly as the factory pieces. The difference is C3 does it for a fraction of the cost of Ferrari carbon! C3 has matched the OEM Ferrari 1x1 3K plain weave for a perfectly factory Ferrari appearance. Easy installation makes this a must-have for any 488 GTB or Spider owner. FITS: All 2016+ Ferrari 488 models FEATURES: Autoclaved pre-preg dry carbon fiber with 1x1 3K plain weave identical to Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari 458 Carbon Fiber Front Trunk C3's exacting quality, precise fitment, and a premium hand-polished finish come at a far more reasonable price than the factory Ferrari pieces. Precision-formed in an autoclave from the finest aerospace-grade pre-impregnated dry carbon fiber, each C3 piece matches the 1x1, 3K plain weave of OEM Ferrari carbon perfectly. Fit-and-finish are, of course, impeccable for a truly factory appearance. FEATURES: Autoclaved pre-preg dry carbon fiber 1x1, 3K plain weave matched to OEM Ferrari Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Each piece installs in minutes without any modifications KIT INCLUDES: Four pre-preg dry carbon trim panels Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.