Girodisc
A1-015 Girodisc 2pc Front Brake Rotors
$1,400.00
FITS: Ferrari 360 Challenge
Discovery Parts is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline.
The GiroDisc system is an upgrade to a 2-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake disc. The 2-piece floating disc will bolt directly to the car and work with OEM calipers perfectly. By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Giro Disc rotors are lighter than OEM pieces. The reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.
When used with Pagid or PFC performance brake pads, and Discovery Parts RF-1 brake fluid (also available from CompetitionMotorsport.com), you have an amazing solution to overheating, cracking and warping rotors.
The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations. The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.
The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The 2-piece GiroDisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling.
Sold/Priced per pair.
Girodisc
A1-001 Girodisc Front Or 2pc Rear Brake Rotors (Ferrari 360-430)
$1,200.00
FITMENTS (FRONT or REAR):
Ferrari F430
Ferrari 360 Modena
DiscoveryParts is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline.
This Girodisc system is an upgrade to a two-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake discs. The two-piece floating rotors will bolt directly to the F430 and 360 Modena, front or rear, and work flawlessly with OEM calipers. By upgrading your brakes with these lightweight, high-performance replacements -- as opposed to a big brake kit -- your factory brake bias is maintained as well as your ABS effectiveness and efficiency. These Girodisc rotors are lighter than OEM pieces, giving you a reduction in rotational and unsprung weight allowing for quicker acceleration, stronger braking, and faster suspension response.
When used with Pagid or PFC performance brake pads, and Discovery Parts RF-1 brake fluid, you have the ultimate solution to overheating, cracking, and warping rotors from high-performance driving.
The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured in the USA from cast iron made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.
The rotor and hat mount together through a floating mount system which utilizes ten high-strength alloy steel drive pins manufactured by Girodisc in the USA to exact specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade 12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The two-piece Girodisc design allows for rotor-ring only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling.
Sold/priced per pair.
Girodisc
D2-054 Girodisc Rear Replacement Rotor Rings
$600.00
FITS: FERRARI 355 CHALLENGE
REPLACEMENT ROTOR DISC ONLY, DOES NOT INCLUDE ALUMINUM HAT.
Discovery Parts is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline.
The GiroDisc replacement rotor system is a direct rotor disc replacement for the Giro Disc 2-piece hat and rotor and no modifications are necessary.
The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The 2-piece GiroDisc design allows for rotor only replacement to minimize replacement costs and deliver outstanding performance and cooling.
Sold/Priced per pair.
Girodisc
A2-054 Girodisc 2pc Rear Brake Rotors
$1,300.00
FITS: Ferrari 355 CHALLENGE
Discovery Parts is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline.
The GiroDisc system is an upgrade to a 2-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake disc. The 2-piece floating disc will bolt directly to the car and work with OEM calipers perfectly. By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Giro Disc rotors are lighter than OEM pieces. The reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.
When used with Pagid or PFC performance brake pads, and Discovery Parts RF-1 brake fluid (also available from CompetitionMotorsport.com), you have an amazing solution to overheating, cracking and warping rotors.
The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations. The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.
The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The 2-piece GiroDisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling.
Sold/Priced per pair.
Girodisc
D1-054 Girodisc Front Replacement Rotor Rings
$600.00
FITS: FERRARI 355 CHALLENGE
REPLACEMENT ROTOR DISC ONLY, DOES NOT INCLUDE ALUMINUM HAT.
Discovery Parts is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline.
The GiroDisc replacement rotor system is a direct rotor disc replacement for the Giro Disc 2-piece hat and rotor and no modifications are necessary.
The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The 2-piece GiroDisc design allows for rotor only replacement to minimize replacement costs and deliver outstanding performance and cooling.
Sold/Priced per pair.
Girodisc
D1-002 Girodisc Front Replacement Rotor Rings
$600.00
FITS: FERRARI 348/355
REPLACEMENT ROTOR DISC ONLY, DOES NOT INCLUDE ALUMINUM HAT.
Discovery Parts is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline.
The GiroDisc replacement rotor system is a direct rotor disc replacement for the Giro Disc 2-piece hat and rotor and no modifications are necessary.
The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The 2-piece GiroDisc design allows for rotor only replacement to minimize replacement costs and deliver outstanding performance and cooling.
Sold/Priced per pair.
Girodisc
A1-054 Girodisc 2pc Front Brake Rotors
$1,400.00
FITS: Ferrari 355 CHALLENGE
Discovery Parts is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline.
The GiroDisc system is an upgrade to a 2-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake disc. The 2-piece floating disc will bolt directly to the car and work with OEM calipers perfectly. By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Giro Disc rotors are lighter than OEM pieces. The reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.
When used with Pagid or PFC performance brake pads, and Discovery Parts RF-1 brake fluid (also available from CompetitionMotorsport.com), you have an amazing solution to overheating, cracking and warping rotors.
The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations. The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.
The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The 2-piece GiroDisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling.
Sold/Priced per pair.
Girodisc
A1-002 Girodisc 2pc Front Brake Rotors
$1,200.00
FITS: Ferrari 348/355
DiscoveryParts is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline.
The GiroDisc system is an upgrade to a 2-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake disc. The 2-piece floating disc will bolt directly to the car and work with OEM calipers perfectly. By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Giro Disc rotors are lighter than OEM pieces. The reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.
When used with Pagid or PFC performance brake pads, and Discovery Parts RF-1 brake fluid (also available from CompetitionMotorsport.com), you have an amazing solution to overheating, cracking and warping rotors.
The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations. The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.
The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The 2-piece GiroDisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling.
Sold/Priced per pair.
IPD
IPD Intake Plenum Porsche 970 Panamera Turbo-Turbo S
$795.00
IPD Plenum for Porsche Panamera Turbo/Turbo S
The IPD Panamera Turbo/Turbo S intake plenum has a revised diversion area and larger openings that optimize intake air velocity and volume. This more efficient design provides the same great power increase as it does on the Cayenne Turbo, with an additional 30 horsepower and 32 lbs-ft of torque at the wheels. The IPD Panamera Turbo/Turbo S plenum opens up performance throughout the entire power curve, giving you performance that can be felt in the seat of your pants.
The factory plastic intake plenum is prone to cracking, especially given the Panamera Turbo's higher boost levels. The IPD Plenum is precision-cast aluminum that will not crack and can handle the highest boost levels.The IPD Plenum utilizes all factory hardware including the OEM 76mm throttle body. The only thing more impressive than the substantial power gains provided by the IPD Panamera Turbo/Turbo S plenum is how easily it installs.
IPD
IPD Intake Plenum Porsche 997.1 Turbo (74mm TB)
$950.00
IPD Intake Plenum for Porsche 997.1 Turbo
Designed for the 74mm throttle body to maximize performance and durability!
FITS: Porsche Carrera Turbo (2007-2009)
In 2007, the incredible 997 Porsche Turbo was the most revolutionary and capable Porsche Turbo to ever come out of Germany. This already-explosive power can be further increased with the 997.1 Turbo IPD Intake Plenum.
The patented IPD Plenum design unlocks power and torque increases over factory power curves from launch to redline. Maximum power increases take place in the midrange where they're most needed and most critical. The 997 Turbo ECU requires an adaptation period through either a series of hard pulls on the dyno or 10 to 50 miles of hard driving (on a closed-circuit or race track).
Turbo customers looking to increase engine power and torque without pushing the motorsport envelope to redline would best benefit from the 74mm IPD Turbo Plenum. This version of the plenum uses the factory 74mm throttle body and delivers impressive performance gains for both stock and slightly modified Turbos with exhaust and software. To push beyond these performance mods, we recommend upgrading to the larger IPD Intake Plenum for 82mm Throttle Body .
Add IPD's extraordinary high-flowing 997.1 Turbo Y-Pipe for even more dramatic increases in horsepower and torque. This IPD Plenum and Y-Pipe are designed to work perfectly together.
We recommend installation of this IPD Plenum be performed by a qualified and trained Porsche technician.
IPD
IPD Intake Plenum Porsche 991.1 Carrera S-GTS-4S 3.8L
$995.00
IPD Intake Plenum for Porsche 991.1 Carrera S/GTS/4S
FITS:
Porsche Carrera S (2011-2015)
Porsche Carrera GTS (2014-2016)
Porsche Targa 4S (2014-2016)
Like most Carreras, the power output of this Porsche's 3.8L naturally-aspirated engine is controlled to meet a performance target that satisfies mass buyers but not necessarily the dedicated Porsche driving enthusiast. IPD helps scratch the proverbial performance itch for Porsche drivers looking to elevate the already visceral driving experience to the next level.
The 3.8L engine in the 991 Carrera S, GTS, and 4S is relatively unchanged from the previous 997.2 Carrera S, continuing to employ the 82mm throttle body. IPD's new specifically-designed 3.8L DFI Carrera S intake plenum is a direct bolt-on upgrade that replaces the factory air distributor and utilizes all pre-existing factory hardware including that OE factory throttle body.
INCREASED POWER & TORQUE ACROSS THE REV RANGE
The improved IPD intake design creates increased air velocity and air speed resulting in impressive power and torque gains of 15 HP and 14 lbs-ft. at the wheels on an otherwise-stock 991 S. As with most IPD plenums, the bulk of the power gains are realized in the mid-range where they are most used and enjoyed. Unlike other mods, though, the IPD Plenum delivers net power gains across the entire rev range.
Installation time is four to five hours and should only be performed by a qualified Porsche technician. Feel free to give us a call at 888-748-7223 with any questions!
IPD
IPD Intake Plenum Porsche 991.1 Carrera 3.4L
$950.00
IPD Intake Plenum for Porsche 991 Carrera 3.4L
FITS: Porsche 911 Carrera (2011-2015)
The 991 Carrera is arguably one of the sexiest Porsches to come out of Stuttgart. But like most Carreras, power output is controlled to meet a performance target below the Carrera S, one that satisfies the masses but not necessarily the dedicated Porsche driving enthusiast. IPD helps scratch the proverbial performance itch for Porsche drivers looking to elevate the already visceral driving experience to the next level.
The 3.4L engine in the 991 is relatively unchanged from the previous 997.2 Carrera. It continues to employ the 82mm throttle body just like the Carrera before it. IPD's new specifically-designed 3.4L DFI Carrera intake plenum is a direct bolt-on upgrade that replaces the factory air distributor and utilizes all pre-existing factory hardware including the OE factory throttle body.
INCREASED POWER & TORQUE ACROSS THE REV RANGE
The improved IPD intake design creates increased air velocity and air speed resulting in impressive power and torque gains of 15 HP and 14 lbs-ft. at the wheels on an otherwise-stock 991. As with most IPD plenums, the bulk of the power gains are realized in the mid-range where they are most used and enjoyed. Unlike other mods, though, the IPD Plenum delivers net power gains across the entire rev range.
Installation time is four to five hours and should only be performed by a qualified Porsche technician. Feel free to give us a call at 888-748-7223 with any questions!
Forgeline
Forgeline GZ3R Wheels (5 Lug)
$1,800.00
Call us any time at 888-748-7223 for Discovery Parts-Exclusive
Forgeline pricing you won't find anywhere else!
Discovery Parts offers
FREE SHIPPING on all Forgeline Wheel Orders!
FORGELINE GZ3R (5 LUG)
Priced per Wheel (ask about our special wheel and tire package pricing)
CONTACT ONE OF OUR SPECIALISTS TODAY TO CREATE YOUR CUSTOM FORGED WHEEL SET. BECAUSE WE USE FORGELINES ON OUR OWN CARS, WE KNOW WHAT WORKS FOR YOURS!
After over 20 years of involvement with teams of virtually every sports car racing organization in the world, we have learned what it takes to produce a racing wheel that can withstand the fierce conditions of the sport. This knowledge has been applied to our latest competition wheel - the GZ3R.An updated version of the incredibly popular ZX3R, the Forgeline GZ3R is an attractive contemporary premium 3-piece performance racing wheel featuring our "I-beamed" spoke technology to reduce weight while adding strength and rigidity. It uses hidden ARP stainless steel assembly hardware for a smooth clean appearance and faster/easier wheel cleaning. Plus the design of the center allows plenty of room for caliper clearance and extreme brake fitment. Visible through-bolts are an option on this wheel, for those who prefer the look of the assembly hardware. The GZ3R is designed for racing. It is engineered with a 1900 lb. street-tire load rating to ensure strength and integrity, even when subjected to the massive loads encountered when used with the stickiest race tires. The GZ3R is produced using our traditional forging method utilizing 6061-T6 aluminum with heat-treated rim shells. And just like any Forgeline wheel, the GZ3R offers fully-customizable fitment and finish, including center-lock applications.
3-Piece Performance Wheel
Stepped-Lip Design
I-Beamed Spoke Technology
Hidden ARP Fasteners
Generous Brake Clearance
Forged 6061-T6 Aluminum
Heat-Treated Rim Shells
1900 lb. Street-Tire Load Rating
Customizable Fitment and Finish Options
Forgeline
Forgeline GW3R Wheels (5 Lug)
$1,800.00
Call us any time at 888-748-7223 for Discovery Parts-Exclusive
Forgeline pricing you won't find anywhere else!
Discovery Parts offers
FREE SHIPPING on all Forgeline Wheel Orders!
FORGELINE GW3R (5 LUG)
Priced per Wheel (ask about our special wheel and tire package pricing)
CONTACT ONE OF OUR SPECIALISTS TODAY TO CREATE YOUR CUSTOM FORGED WHEEL SET. BECAUSE WE USE FORGELINES ON OUR OWN CARS, WE KNOW WHAT WORKS FOR YOURS!
After over 20 years of involvement with teams of virtually every sports car racing organization in the world, we have learned what it takes to produce a racing wheel that can withstand the fierce conditions of the sport. This knowledge has been applied to our latest competition wheel - the GW3R.The Forgeline GW3R is an attractive contemporary premium 3-piece performance racing wheel featuring our "I-Beamed" spoke technology to reduce weight while adding strength and rigidity. It uses hidden ARP stainless steel assembly hardware for a smooth clean appearance and faster/easier wheel cleaning. Plus the design of the center allows plenty of room for caliper clearance and extreme brake fitment. Visible through-bolts are an option on this wheel, for those who prefer the look of the assembly hardware. The GW3R is designed for racing. It is engineered with a 1900 lb. street-tire load rating to ensure strength and integrity, even when subjected to the massive loads encountered when used with the stickiest race tires. The GW3R is produced using our traditional forging method utilizing 6061-T6 aluminum with heat-treated rim shells. And just like any Forgeline wheel, the GW3R offers fully-customizable fitment and finish, including center-lock applications.
3-Piece Performance Wheel
Stepped-Lip Design
I-Beamed Spoke Technology
Hidden ARP Fasteners
Generous Brake Clearance
Forged 6061-T6 Aluminum
Heat-Treated Rim Shells
1900 lb. Street-Tire Load Rating
Customizable Fitment and Finish Options
Forgeline
Forgeline GA3R CL Wheels (Porsche Centerlock)
$1,800.00
Call us any time at 888-748-7223 for Discovery Parts-Exclusive
Forgeline pricing you won't find anywhere else!
Discovery Parts offers
FREE SHIPPING on all Forgeline Wheel Orders!
FORGELINE GA3R CL (PORSCHE CENTERLOCK)
Priced per Wheel (ask about our special wheel and tire package pricing)
CONTACT ONE OF OUR SPECIALISTS TODAY TO CREATE YOUR CUSTOM FORGED WHEEL SET. BECAUSE WE USE FORGELINES ON OUR OWN CARS, WE KNOW WHAT WORKS FOR YOURS!
After over 20 years of involvement with teams of virtually every sports car racing organization in the world, Forgeline has learned what it takes to produce a lightweight racing wheel that can withstand the fierce conditions of the sport. This knowledge has been applied to their latest and greatest - the best three-piece wheel that they have ever made - the GA3R. This version, the GA3R CL, is engineered specifically for Porsche Center Lock applications.Their signature "I-beamed" spoke technology reduces weight and applies additional strength and rigidity within the spokes of the wheel. The hidden titanium assembly hardware delivers a smooth clean look and makes wheel cleaning faster and easier. The design of the GA3R's center allows plenty of room for caliper clearance and extreme brake fitment. And Forgeline employed a new, proprietary fast-drying super-strength sealer that is highly resistant to leaks and allows for quick and easy repairs.The GA3R CL is truly designed for racing. It is engineered with a 2100-lb. street-tire load rating to ensure strength and integrity, even when subjected to the massive loads encountered on the stickiest race tires. And it is the only wheel that is actually warranted for use in racing applications!The GA3R CL is produced using Forgeline's traditional forging method, machined from 6061-T6 aluminum billets with heat-treated rim-shells. And just like any Forgeline wheel, the GA3R CL is fully customizable in fitment and finish.Now available in 18-inch, 19-inch, and 20-inch sizes in virtually any width and offset.
Extremely Lightweight and Very Strong
3-Piece Competition Wheel
Stepped-Lip Design
I-Beamed Spoke Technology
Lightweight Titanium Fasteners
Hidden Fasteners
Generous Brake Clearance
Forged 6061-T6 Aluminum
Heat-Treated Rim Shells
2100-lb. Street-Tire Load Rating
Warranted for Racing!
Unlimited Customizable Fitment and Finish Options
Forgeline
Forgeline GA3R Wheels (5 Lug)
$1,429.00
Call us any time at 888-748-7223 for Discovery Parts-Exclusive
Forgeline pricing you won't find anywhere else!
Discovery Parts offers
FREE SHIPPING on all Forgeline Wheel Orders!
FORGELINE GA3R (5 LUG)
Contact one of our wheel specialists today at 888-748-7223 to discuss your custom Forgeline wheel package. We can help you with sizing, offset, finish selection, and features. Plus, they are racing tire specialists who can put together the perfect wheel-and-tire package to suit your needs!
After over 20 years of involvement with teams in virtually every sports car racing series in the world, Forgeline knows what it takes to produce a lightweight racing wheel that can withstand the fierce conditions of the sport. This knowledge has been applied to their latest and greatest, the best three-piece wheel that they have ever made: the GA3R.Forgeline's signature I-Beamed Spoke technology reduces weight and adds strength and rigidity to the spokes of the wheel. The hidden titanium assembly hardware delivers a smooth, clean look, making wheel cleaning faster and easier. The design of the GA3R's center allows plenty of room for caliper clearance and extreme brake fitment. Forgeline employs a proprietary fast-drying, super-strength sealer that is highly resistant to leaks and allows for quick and easy repairs.The Forgeline GA3R is truly designed for racing. Each wheel is engineered with a 2100-lb. load rating to ensure strength and integrity when subjected to the massive forces encountered on the stickiest race tires. It is the only wheel actually warranted for use in racing applications!The GA3R is produced using Forgeline's traditional forging method, milled from a 6061-T6 aluminum billet with heat-treated rim shells. Like any Forgeline wheel, the GA3R is fully customizable in fitment and finish, including center lock applications. It is available in 17-, 18-, 19-, and 20-inch sizes in virtually any width and offset.
FEATURES:
Extremely Lightweight and Very Strong
Forged 6061-T6 Aluminum
Three-Piece Competition Wheel
Stepped-Lip Design
I-Beamed Spoke Technology
Hidden, Lightweight Titanium Fasteners
Generous Brake Clearance
Heat-Treated Rim Shells
2100-lb. Street-Tire Load Rating
Warranted for Racing
Unlimited Customizable Fitment and Finish Options
