Racing Harness | Accessories | Mounting Hardware

Harness Mounting

Race Car Mounting Hardware. Regardless of what car you drive or what class you compete in, you are going to need to install a harness system. Proper harness mounting is essential for proper function. We stock harness end plates, long and short eyebolts, slide bars adjusters, long and short snap ends, bolt ends in both 2" and 3" width - you name it, DiscoveryParts has it. We even have the harness belt roll bar end clamps to keep your shoulder belts or head containment net in the perfect position. Whether you are mounting a new system or reconfiguring an old one, we have what you need to get the job done correctly and safely.

G-Force Harness 3" Slide Bar Adjuster
In Stock
These Replacement Harness 3 Inch Slide Bar Adjusters Allow Racers To Make adjustments to G-FORCE seat belt harnesses for a safe and comfortable fit when strapped into the driver's seat. They're made of steel with a zinc plated finish and fit 3" belts perfectly.
$6.00
G-Force 7/16 x 20mm Short Eyebolt
In Stock
The G-Force 109H eyebolt has a 1/2" I.D. eyelet that has 7/16 x 24 threads that are 20mm long to install into your chassis. Make harness mounting to your tub or mount tab easy with this G-Force harness eyebolt.
$6.00
G-Force Harness 2" Snap-End
In Stock
G-Force 2" harness snap end for easy harness removal. G-Force 107H 2" Snap-End Harness Snap Hooks From G-Force provide secure anchoring without having to be bolted down. If you need to remove the belts, they allow you to do so quickly and easily.
$5.00
G-Force Harness Back-Up Plate
Last items in stock
 A 4" x 4" x 1/8" steel plate with pre-drilled 7/16" hole. G-Force Harness Back-Up Plate is required by most sanctioning bodies when mounting belts directly to body of race car.
$5.00
Schroth Bolt In Bracket 2" B24
In Stock
The Schroth B24 is the most economical harness bolt-in bracket offered. It is a heavy-duty Steel bracket that fits both 2" and 3" belts and has a 10° bend to make install easy. Heavy Duty Steel - Schroth Bolt In Bracket - 2" B24.
$3.99
Harness Belt Roll Bar Guide Clamp 1.5"
In Stock
Keep your shoulder belts or head containment net straps in place with our H.D. metal 2 piece harness guide clamp that fits 1.5" roll bars perfectly.
$17.95
Harness Belt Roll Bar Guide Clamp 1.75"
Last items in stock
Keep your shoulder belts or head containment net straps in place with our H.D. metal 2 piece harness guide clamp that fits 1.75" roll bars perfectly.
$17.95
Schroth Reinforcement Plates 7/16" x 20TPI
In Stock
Schroth 7/16" x 20TPI Reinforcement Back-Up Plates for a perfect harness install. This Schroth back-up plate measures 3.25" long x 2" wide with a 7/16 x 20TPI nut welded to it. This is what comes with most Schroth harness sets to mount your harness eyebolt to.
$4.50
Schroth Reinforcement Plates M10 Nut
In Stock
Schroth M10 Reinforcement Back-Up Plates for a perfect harness install. This Schroth back-up plate measures 3.25" long x 2" wide with a M10 nut welded to it. 
$12.50
Schroth Harness 7/16" x 22mm Short Eyebolt
In Stock
These Eye Bolts Are Designed To Work Perfectly with the B14 Snap On Brackets to make harness installation easy. The thread length is 22mm long and the thread size is 7/16", making it possible to install in most factory seat belt mount holes. 

 
$3.50
Schroth Harness 7/16" x 38mm Long Eyebolt
In Stock
Schroth Short Eyebolt, usually installed on the chassis of a racecar, makes harness install and removal lightning fast. Motorsports grade 7/16" x 38mm is Grand-Am, SCCA, NASA, PCA, BMWCCA, ChumpCar and Lemons legal. This harness end is built better than almost every car it is installed in. This is real racing harness hardware.
 
$4.00
G-Force Harness 3" Snap-End
In Stock
These 3" Snap-End Harness Snap Hooks From G-Force Provide Secure Anchoring Without Having To be bolted down. If you need to remove the belts, they allow you to do so quickly and easily.
$5.00
Schroth Harness Bar Slide 2" LV4
In Stock
The Schroth LV4 is the most compact 2" harness lock bar (harness end) offered. If you have a tight space and the normal double slot lock bar is too bulky, the Schroth LV4 Harness Bar Slide (Harness Lock Bar) is your answer.
$3.75
Schroth Snap In Bracket B14/B15
In Stock
The Schroth B14 is a race harness snap in bracket, also called a harness snap hook, that fits both 2" and 3" belts. Manufactured from heavy duty steel with a spring loaded snap, the Schroth B14 snap in bracket is SCCA, NASA, PCA, BMWCCA, Grand-Am, and WRC legal.
$3.25
Schroth Wavy Washer for 7/16" Eyebolts
In Stock
Whenever a bolt or eye-bolt is used to attach a harness to your vehicle, you should use the Schroth S3 wavy washer. We usually install one Schroth S3 on each side of the sheet metal with a little Loc-Tite to ensure many race seasons of a worry free harness installation. In addition, the Schroth S3 wavy washer will help keep the eyebolts tight.
$0.15
Schroth Harness 3 Bar Slide 2" LV10
In Stock
The Schroth LV10 is used on the Profi Hans shoulder and sub-belts. Easy to install, this 3 bar 2" harness lock bar is black powder coated for years of trouble free installation. 
$3.75
Schroth Reinforcement Plates M8 Nut
Schroth M8 Reinforcement Back-Up Plates for a perfect harness install. This Schroth back-up plate measures 3.25" long x 2" wide with a M8 nut welded to it. 
$6.50
Schroth B23A Bendable Snap End Kit
Schroth B23 harness ends are bendable and make racing harness easier where there is very little clearance. You bolt one end to the chassis, bend it to the needed shape, and attach your harness snap end.

 
$14.95
BMW F8x/E9x Harness Mount Kit for Passenger Lap Belt Brey Krause R-9288
The Brey Krause Model R-9288 Lap Belt Mount fits the passenger-side of all BMW F8x & E9x models (including the M3) and allows for the quick and easy mounting of snap-in lap belts. Will not interfere with factory seat belt. Includes 2 brackets for both the door and tunnel sides of the seat.
$88.15
BMW F8x/E9x Harness Mount Kit for Driver Lap Belt Brey Krause R-9289
The Brey Krause Model R-9289 Lap Belt Mount fits the driver-side of all BMW F8x & E9x models (including the M3) and allows for the quick and easy mounting of snap-in lap belts. Will not interfere with factory seat belt. Includes 2 brackets for both the door and tunnel sides of the seat.
$88.15
Schroth 01327 Harness Bolt-on Kit with Bushings
Schroth 01327 Harness Bolt-on Kit with Bushings is used then you need a bolt-on harness to chassis fitting to allow relative motion between the two. Why would you want to use the Schroth 01327 bolt-in kit? When you have a moveable seat you want to keep the belt properly placed, regardless of seat position, the Schroth 01327 allows alignment and no binding.
$32.95
Schroth Harness 3 Bar Slide 3" LV7
The Schroth LV7 is used on Schroth 3" harness webbing to secure the harness material to a roll-bar, snap-end or bolt-end fitting. Easy to install, this 3 bar 3" harness lock bar is black powder coated for years of trouble free installation. 
$4.50