Bell Helmet Forced Air Upgrade Kits

Forced Air Kits

DiscoveryParts offers the top and side forced-air upgrade kits for your Bell Helmet. With driver cockpits becoming loaded with more things, let's not forget the basics - upgrading your Bell helmet to forced-air to bring driver comfort to a new level. No more fogged shields or sweat going into your eyes during the hottest days on track!

Top Forced-Air: If you have extra headroom, we prefer a Bell Top Air Adapter to keep the aifrlow on the top of your head (hottest part) along with Bell's proven air ducting and channeling system that also allows a smaller portion of air to be channeled to your forehead and eye area. By having the majority of the air concentrated to the top of your head and a smaller portion going to your forehead/eye area, we combine driver temperature regulation with the ability to prevent salty sweat from dripping in your eyes.

Side Forced-Air: If you are a taller driver or your race seat/roll cage/chassis does not allow the required 2 inches above your helmet, then the side force air adapter is your choice. With about 80% effectiveness compared to the Top Forced-Air option, the Bell side forced air adapters are a problem solver. If you are a taller driver in a Miata, Cayman, or small driver compartment racecar, a Bell side forced-air adapter will bring your driver temperatures lower allowing for less fatigue and quicker lap times.

Bell Carbon Top Air Cover for HP5,HP7, RS7 for 1.25" Hose
Last items in stock
The 8 Hole Carbon Fiber Top Air kit for the standard 1.25" Cool Shirt Blower hose is designed to make the Bell HP5, GT.5, HP7, HP7 Duckbill, RS7 and RS7 Duckbill helmets top forced air. The 8 Hole Top Air design directs airflow only around the top of the helmet and is effective for drivers with contact lenses or who are sensitive to airflow around the eye area.
$149.95
Bell Forced Air Adaptor QL Nozzle 90°
In Stock
The Bell Forced Air 90 Degree Adaptor Allows the Use of 1.5" Forced Air hoses with Bell Helmets (all Forced-Air SA2010 Bell helmets come with 1" outlets). Malleable construction is easy to install. 90° design allows for more efficient hose routing in tight spaces.
$19.95
Bell Forced Air Adaptor QL Nozzle Straight
In Stock
Bell Helmets 2070066 Helmet Hose Adapter Small helmet fitting to large supply hose. This Bell Adapter attachment hose to air vents on Bell helmets.  For use with the smaller 0.875" helmet air intake tubes.
$19.95
Maglock Air Helmet Air Hose Disconnect Kit
Last items in stock
Maglock Air Helmet Air Hose Disconnect Kit is the fastest, safest, and best way to connect a helmet air hose to your forced air helmet. Using rare earth magnets that positively lock the supply hose to your helmet connector to provide full flow when connected, and disconnects easily during a driver change or emergency egress. 
$189.95
MagLock Air Helmet Side Only Kit
Last items in stock
Maglock Air Helmet Air Hose Disconnect Kit is the fastest, safest, and best way to connect a helmet air hose to your forced air helmet. Using rare earth magnets that positively lock the supply hose to your helmet connector to provide full flow when connected, and disconnects easily during a driver change or emergency egress. 
$94.95
Bell Carbon Top Air Cover 10 Hole for HP5,HP7, RS7 for 1.25" Hose
The 10 Hole Carbon Fiber Top Air kit for the standard 1.25" Cool Shirt Blower hose is designed to make the Bell HP5, GT.5, HP7, HP7 Duckbill, RS7 and RS7 Duckbill helmets top forced air. The 10 Hole Top Air design directs airflow around the top of the helmet for comfort and onto the shield to reduce fogging.
$149.95
Bell Carbon Top Air Cover for HP5,HP7, RS7 for 0.875" Hose
The 10 Hole Carbon Fiber Top Air kit for the standard 0.875" Cool Shirt Blower hose is designed to make the Bell HP5, GT.5, HP7, HP7 Duckbill, RS7 and RS7 Duckbill helmets top forced air. The 10 Hole Top Air design directs airflow around the top of the helmet for comfort and onto the shield to reduce fogging.
$149.95
Bell HP5 Side Air Adapter for 1.25" Hose
This Bell Side-Air Adapter easily installs to your Bell HP5 or GT5 helmet using the supplied 3M VHB (Very Hi-Bond) tape to provide fresh forced air into your helmet. Designed to perfectly fit the Bell HP5, this has the larger 1.25" nozzle that Bell Racing calls V.05. This is an easy to install side forced air piece that makes the longest of enduro's not just tolerable, but enjoyable.
Bell K.1 Pro/GP.2 Carbon Top Air Kit 1.25" Hose
The Bell Carbon Fiber Top Forced Air kit for the standard 1.25" Cool Shirt Blower hose is designed to make the Bell K.1 Pro and GP.2 helmets top forced air. The Bell Carbon Fiber Top Air design directs airflow around the top of the helmet for comfort and onto the shield to reduce fogging.
$99.95
Bell K.1 Pro/GP.2 Carbon Top Air Kit .875" Hose
The Bell Carbon Fiber Top Forced Air kit for the European 0.875" Cool Shirt Blower hose is designed to make the Bell K.1 Pro and GP.2 helmets top forced air. The Bell Carbon Fiber Top Air design directs airflow around the top of the helmet for comfort and onto the shield to reduce fogging.
$99.95
Bell Clear Top Air Cover 10 Hole for HP5,HP7, RS7 for 1.25" Hose
The 10 Hole Clear Top Air kit for the standard 1.25" Cool Shirt Blower hose is designed to make the Bell HP5, GT.5, HP7, HP7 Duckbill, RS7 and RS7 Duckbill helmets top forced air. The 10 Hole Top Air design directs airflow around the top of the helmet for comfort and onto the shield to reduce fogging.
$79.95