Girodisc
A1-205 Girodisc 2pc Front Brake Rotors for Lamborghini Huracan (Centerlock)
$1,900.00
A1-205 Girodisc 2pc Front Brake Rotors for Lamborghini Huracan (Centerlock)
FITMENT: Lamborghini Huracán w/ Centerlock
Iron Rotor Conversion
is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline.
This Girodisc iron rotor conversion is a direct replacement for the OEM Lamborghini carbon ceramic discs with the addition of the provided caliper spacers. At 394mm, the diameter of these Girodisc rotors is larger than the 380mm OEM CCM rotors. By upgrading your brakes with these lightweight, high-performance replacements (as opposed to a big brake kit), your factory brake bias is maintained, along with your ABS efficiency.
Girodisc two-piece floating rotors are lighter than OEM cast iron brake rotors. This reduction in rotational mass and unsprung weight allows for quicker acceleration, sharper steering, and faster suspension response.
When used with Pagid or PFC performance brake pads and CMS RF-1 brake fluid (available from ), you have an amazing solution to overheating, cracking and warping rotors.
The central hat section of each Girodisc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.
The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance.
Sold/priced per pair.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Girodisc
A2-161 Girodisc 2pc Rear Brake Rotors for Ferrari 488/F8/Pista
$1,900.00
A2-161 Girodisc 2pc Rear Brake Rotors for Ferrari 488/F8/Pista
Fitments (REAR):
Ferrari 488
Ferrari 488 Pista
Ferrari F8
is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most Girodisc systems the same or next business day to ensure we meet your delivery deadline.
The Girodisc system is a direct replacement for the OE disc. No modifications are necessary. The disc will bolt directly to the car and work with OE calipers perfectly.
The central hat section of our rotor is made from strictly U.S. sourced 6061-T6 aircraft specification aluminum. The disc is made from our own proprietary cast iron, poured in the USA and machined from start to finish in house at Girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.
The rotor and hat have a floating mount system, which utilizes ten high strength alloy steel drive pins, manufactured by Girodisc in the USA to our own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking while maintaining the axial and radial float between the hat and disc.
The pins are secured by Class 12.9 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads.
Once the Girodisc system is in place, simply replace the cast iron rotor when needed.
Sold/priced in pairs
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Forgeline
Forgeline GE1 Wheels (Porsche Centerlock)
$1,900.00
Call us any time at 888-748-7223 for Discovery Parts-Exclusive
Forgeline pricing you won't find anywhere else!
Discovery Parts offers
FREE SHIPPING on all Forgeline Wheel Orders!
Forgeline GE1 Wheels (Porsche Centerlock)
Contact a wheel specialist today at 888-748-7223 to discuss the details of your custom Forgeline wheel build. We can guide you through sizing, offsets, finishes, and other details to make sure your Forgelines are perfectly suited to your needs!
The 8-spoke center locking Forgeline GE1 combines the latest in advanced wheel technology, including one piece forged monoblock construction, motorsport engineered design, I-beamed spokes, and I-beamed spoke spans to deliver head-turning good looks with track-ready capability. The GE1 is engineered exclusively for Porsche center lock applications and fits all Porsche center lock systems for street and track, including Cup Car and RSR applications.
The Forgeline GE1 is a fully-forged one-piece monoblock wheel. Utilizing manufacturing technology similar to our very successful GA1R wheel, the concave 8-spoke design of the GE1 looks great and allows plenty of room for caliper clearance and extreme brake fitment. The one-piece monoblock forging and computer-simulated FEA design process yield a wheel that is very lightweight, extremely stiff, and has excellent fatigue strength.
The GE1 is machined from a single forging of 6061-T6 aluminum. It is currently available in 18, 19, 20, and 21-inch diameters. (Please Note: Depending on size, the GE1 may be available in deep, medium, or shallow concave profiles.) And just like any Forgeline wheel, the GE1 is available with fully customizable finish options.
One-Piece Monoblock Construction
Available in 18", 19", 20", and 21"
Concave Profile
8-Spoke Design
Engineered for Porsche Center Lock Fitments
I-Beamed Spoke Technology
I-Beamed Spoke Spans Along the Lip
Very Lightweight
Generous Brake Clearance
Forged 6061-T6 Aluminum
Fits All Porsche Center Lock Systems for Street and Track, Including Cup Car and RSR Applications
Customizable Finish Options
Legendary Forgeline Quality
Girodisc
A2-159 Girodisc 2pc Rear Brake Rotors (McLaren 570 - 650S - 600LT - 720S)
$1,900.00
A2-159 Girodisc 2pc Rear Brake Rotors (McLaren 570 - 650S - 600LT - 720S)
This high-performance product is built to meet the demands of competitive racing. Designed for durability, precision, and track-day performance.
Engineered for Performance on the Track
FITMENT (REAR):
McLaren 650S
McLaren 570S
McLaren 720S
McLaren 600LT
is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most Girodisc systems the same or next business day to ensure we meet your delivery deadline.
The Girodisc system for the McLaren 600LT, 720S, 650S or 570S is a direct replacement for the OEM carbon ceramic rotors. No modifications are necessary, the Girodisc rotors will bolt directly to your McLaren and work with the original calipers without issue.
We recommend Pagid 4346 racing brake pads for this Girodisc system, in either RS29 (endurance) or RS14 (sprint) compound.
The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is made from cast iron to the same specification and material as used by professional racing organizations. It is a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, manufactured by Girodisc to our own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads.Once the Girodisc system is in place, simply replace the cast iron rotor when needed. When used with Pagid pads and high-temp racing brake fluid, you have a truly amazing, race-proven solution to the fragile, ultra-expensive carbon-ceramic rotors on your McLaren.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Forgeline
Forgeline GE1R Wheels (Porsche Centerlock)
$1,900.00
Call us any time at 888-748-7223 for Discovery Parts-Exclusive
Forgeline pricing you won't find anywhere else!
Discovery Parts offers
FREE SHIPPING on all Forgeline Wheel Orders!
FORGELINE GE1R (PORSCHE CENTER LOCK)
Contact a Forgeline specialist today at 888-748-7223 to discuss the details of your Forgeline wheel build.
We will guide you through sizing, offsets, finishes, and other details to make sure your Forgelines are perfectly suited to your needs!
FITS PORSCHE CENTER LOCK HUBS
The eight-spoke center-locking Forgeline GE1R represents the absolute latest in advanced wheel technology, including one-piece forged monoblock construction, motorsport engineered design, and I-beamed spokes and spans. It combines head-turning good looks with race-ready strength and durability.
The Forgeline GE1R is a fully-forged one-piece monoblock wheel that is 30% stiffer than the popular GS1R, minimizing wheel deflection under load for incredibly precise control. The concave eight-spoke design of the GE1R offers generous caliper clearance for large racing-brake fitments. Forgeline's computer-simulated FEA design process yields a wheel that is very lightweight and extremely stiff, with excellent fatigue strength.
The GE1R is engineered exclusively for Porsche center lock applications such as the GT3 and GT3RS; it can be equipped with a special center lock to accommodate Porsche Cup Car and RSR hub assemblies.
Available in 18, 19, 20, and 21-inch diameters, the GE1R is fully customizable with thousands of finish options!
FEATURES:
One-Piece Monoblock Forged 6061-T6 Construction
Concave Profile
Eight-Spoke Design
Engineered for Porsche Center Lock Fitments
I-Beamed Spoke Technology
I-Beamed Spoke Spans Along the Lip
Extremely Lightweight, Stiff, and Strong
Generous Brake Caliper Clearance
Accommodates Porsche Cup Car Pressure Washer and Hub
Customizable Finish Options
Legendary Forgeline Quality
Girodisc
A1-119 Girodisc 2pc Front Brake Rotors for Lamborghini Aventador
$1,900.00
A1-119 Girodisc 2pc Front Brake Rotors for Lamborghini Aventador
FITMENT: Lamborghini Aventador
is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline.
The Girodisc system is an upgrade to a two-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake rotors. These two-piece floating rotors will bolt directly to the car and work with your OEM calipers perfectly. By upgrading your brakes with these lightweight, high-performance replacements (as opposed to a big brake kit), your factory brake bias is maintained, along with your ABS efficiency.
Girodisc two-piece floating rotors are lighter than OEM brake rotors. This reduction in rotational mass and unsprung weight allows for quicker acceleration, sharper steering, and faster suspension response.
When used with Pagid or PFC performance brake pads, and RF-1 brake fluid (available from ), you have an amazing solution to overheating, cracking and warping rotors.
The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.
The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance.
Sold/priced per pair.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Girodisc
A1-075 Girodisc 2pc Front Brake Rotors
$1,900.00
A1-075 Girodisc 2pc Front Brake Rotors
FITMENT: Ferrari 599 GTB with CCM rotors
is an authorized dealer for Girodisc products. As one of the largest stocking dealers in the country, we ship most products the same or the next business day to ensure we meet your delivery deadline.
The Girodisc system is a direct replacement for the OE disc however a different brake pad with an annulus (pad swept area) of 66mm or less must be used. This is done to keep the rotor weight at a reasonable level. If we manufactured a rotor with the same annulus as the OEM CCM rotors they would be far too heavy.
The necessary pad shape is available from both Pagid and PFC. If there is a specific pad compound you're after, please contact us directly and we'll provide the correct part numbers.
The central hat section of our rotor is made from strictly U.S. sourced 6061-T6 aircraft specification aluminum. The disc is made from Girodisc's own proprietary cast iron, poured in the USA and machined from start to finish in house. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.
The rotor and hat have a floating mount system, which utilizes 8 or 10 high-strength alloy steel drive pins, manufactured by Girodisc in the USA to their own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking while maintaining axial and radial float between the hat and disc. The pins are secured by Grade-12 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side, allowing the rotor to grow with heat expansion while eliminating the rattle and noise typically associated with floating rotors. This float also allows the rotor to self-center between the brake pads.
Once the Girodisc system is in place, simply replace the cast iron rotor when needed.
Sold/priced in pairs.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Girodisc
A2-156 Girodisc 2pc REAR Brake Rotors (OEM PCCB)
$1,900.00
A2-156 Girodisc 2pc REAR Brake Rotors (OEM PCCB)
PORSCHE 991 TURBO & 981 CAYMAN GT4 OEM PCCB
This Girodisc system is a 390mm two-piece steel rotor and aluminum hat combination, a direct-replacement upgrade for the OEM PCCB brakes. The A2-156 will bolt directly to your Porsche and work perfectly with your OEM calipers. There are two main reasons for replacing your PCCB: first, the Girodisc rotors are designed to shed heat more effectively than the original rotors; second, the machined cast iron rotor rings are far more durable than the fragile OEM carbon-ceramic rotors. This is critical when you're swapping wheels on and off the car for track days or racing, because it's so easy to nick a carbon rotor and take a nice chunk out of it. When paired with the Girodisc A1-156 front rotors, your factory brake bias and ABS efficiency are maintained.
When used with Pagid or PFC performance brake pads, and RF1 brake fluid (also available from Discovery Parts), you have an amazing solution to overheating, cracking and warping rotors.
The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations. The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.
The rotor and hat mount together through a floating mount system which utilizes eight to ten high strength alloy steel drive pins manufactured by Girodisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade 12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The two-piece Girodisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling.
Sold/priced per pair.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Girodisc
A1-156 Girodisc 2pc 410mm Front Brake Rotors (replace OEM PCCB)
$1,900.00
A1-156 Girodisc 2pc 410mm Front Brake Rotors (replace OEM PCCB)
This Girodisc system is a 410mm two-piece steel rotor and aluminum hat combination, a direct-replacement upgrade for your car's OEM PCCB brakes1. The Girodisc A1-156 will bolt directly to your Porsche and work perfectly with your OEM calipers.
There are two main reasons for replacing your PCCB: first, Girodisc rotors are designed to shed heat more effectively than the original rotors; second, the machined cast iron rotor rings are far more durable than the fragile PCCB rotors. This is critical when you're swapping wheels on-and-off the car for track days or racing. It's so easy to nick a carbon rotor and take a chunk out of it, rendering it useless.
Pair these Girodisc rotors with Girodisc A2-156 rear rotors to maintain your factory brake bias and ABS efficiency. When used with Pagid or PFC performance brake pads, and CMS RF1 brake fluid, you have an excellent solution to easily cracked carbon-ceramic rotors.
The central hat section of the Girodisc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.
The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance.
Sold/priced per pair.
1 Note: you must use the same pad shape as that used on the Porsche 991/992 GT3/Turbo with factory iron rotors. The annulus (pad swept height) of these pads is smaller than that of the large PCCB pads.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Girodisc
A2-119 Girodisc 2pc Rear Brake Rotors
$1,900.00
A2-119 Girodisc 2pc Rear Brake Rotors
Fits Lamborghini Aventador
The GiroDisc system is a direct replacement for the OEM brake disc. The 2-piece floating disc will bolt directly to the car and work with OEM calipers perfectly. By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Giro Disc rotors are lighter than OEM pieces. The reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.
When used with Pagid or PFC performance brake pads, and RF-1 brake fluid (also available from Discovery Parts), you have an amazing solution to overheating, cracking and warping rotors.
The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations. The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.
The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The 2-piece GiroDisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling.
Sold/Priced per pair.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Girodisc
A2-111 Girodisc 2pc Rear Brake Rotors
$1,900.00
A2-111 Girodisc 2pc Rear Brake Rotors
is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline.
The Girodisc system is an upgrade to a two-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake disc. The two-piece floating disc will bolt directly to the car and work with OEM calipers perfectly. By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Girodisc rotors are lighter than OEM Ferrari parts. The reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.
When used with Pagid or PFC performance brake pads, and RF-1 brake fluid, you have an amazing solution to overheating, cracking and warping rotors.
The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations. The rotor's curved vane design was developed in racing, acting as a centrifugal pump to force cooling air through the disc.
The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by Girodisc in the USA and cadmium plated for corrosion resistance. The alloy drive pins transfer the load from braking while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade 12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The two-piece Girodisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling.
Sold/priced per pair.
Girodisc
A2-110 Girodisc 2pc Rear Brake Rotors
$1,900.00
A2-110 Girodisc 2pc Rear Brake Rotors
FITS: Ferrari 430 SCUDERIA
is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline.
The GiroDisc system is an upgrade to a 2-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake disc. The 2-piece floating disc will bolt directly to the car and work with OEM calipers perfectly. By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Giro Disc rotors are lighter than OEM pieces. The reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.
When used with Pagid or PFC performance brake pads, and RF-1 brake fluid (also available from CompetitionMotorsport.com), you have an amazing solution to overheating, cracking and warping rotors.
The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations. The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.
The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The 2-piece GiroDisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling.
Sold/Priced per pair.
Girodisc
A2-102 Girodisc 2pc Rear Brake Rotors
$1,900.00
is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline.
Fits Ferrari 430 Challenge
The GiroDisc system is an upgrade to a 2-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake disc. The 2-piece floating disc will bolt directly to the car and work with OEM calipers perfectly. By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Giro Disc rotors are lighter than OEM pieces. The reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.
When used with Pagid or PFC performance brake pads, and RF-1 brake fluid (also available from CompetitionMotorsport.com), you have an amazing solution to overheating, cracking and warping rotors.
The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations. The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.
The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The 2-piece GiroDisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling.
Sold/Priced per pair.
Forgeline
Forgeline VX1R Wheels (5 Lug)
$1,900.00
Call us any time at 888-748-7223 for Discovery Parts-Exclusive
Forgeline pricing you won't find anywhere else!
Discovery Parts offers
FREE SHIPPING on all Forgeline Wheel Orders!
FORGELINE VX1R (FIVE-LUG)
Contact a wheel specialist today at 888-748-7223 to discuss the details of your custom Forgeline wheel build. We can guide you through sizing, offsets, finishes, and other details to make sure your Forgelines are perfectly suited to your needs!
If you like the look of our popular VX1, but need a load rating that is suitable for dedicated track duty, then the VX1R was engineered for you! The VX1R is a fully track-ready competition wheel equal in weight and strength to Forgeline's famous GA1R and GS1R Competition Series wheels.The VX1R features a sharp Y-spoke design, with long spokes that wrap around the lug holes, striking sharp angles, a deep concave profile, and a chamfered outer edge. The Forgeline VX1R is a fully-forged, one-piece monoblock wheel utilizing manufacturing technology similar to the very successful GA1R. Beyond just beautiful style, the VX1R is engineered to allow plenty of room for caliper clearance and extreme brake fitment. Forgeline's computer-simulated FEA design process yield a wheel that is lightweight and stiff, with excellent fatigue strength.Currently available in 18, 19, 20, and 21-inch diameters with a range of widths and offsets, the VX1R can be made to accommodate most five-lug or center lock applications. And just like any Forgeline wheel, the VX1R is available with fully customizable finish options!
FEATURES:
One-Piece Forged Monoblock Construction
Concave Profile
Sharp Y-Spoke Design
Striking Sharp Angles
Strong Chamfered Machining Details
Lightweight
Load Rated for Motorsport Applications
Generous Brake Clearance
Forged 6061-T6 Aluminum
Includes Aluminum Center Cap
Customizable Finish Options
Legendary Forgeline Quality
Forgeline
Forgeline GT1 Wheels (Porsche Centerlock)
$1,900.00
Call us any time at 888-748-7223 for Discovery Parts-Exclusive
Forgeline pricing you won't find anywhere else!
Discovery Parts offers
FREE SHIPPING on all Forgeline Wheel Orders!
FORGELINE GT1 (CENTER LOCK)
Contact a wheel specialist today at 888-748-7223 to discuss the details of your custom Forgeline wheel build. We can guide you through sizing, offsets, finishes, and other details to make sure your Forgelines are perfectly suited to your needs!
FITS PORSCHE CENTER LOCK
Derived from the Forgeline GTD1 racing wheel, the GT1 brings racing DNA to the street. The GT1 represents the latest in advanced wheel technology -- including one-piece forged monoblock construction, motorsport engineered design, I-beamed spokes and spoke spans -- to deliver head-turning good looks with track-ready capability!
The Forgeline GT1 is a fully-forged one-piece monoblock wheel. Utilizing manufacturing technology similar to the very successful GA1R wheel, the concave 12-spoke design of the GT1 looks great and allows plenty of room for caliper clearance and extreme brake fitment. Forgeline's computer-simulated FEA design process yields a wheel that is very lightweight and extremely stiff, with excellent fatigue strength.
The GT1 is engineered exclusively for Porsche center lock applications and fits all Porsche center lock systems for street and track, including Cup Car and RSR applications.
Currently available in 18, 19, 20, and 21-inch diameters, we'll have your GT1 made in your choice hundreds of customizable finish options!
FEATURES:
One-Piece Monoblock Construction
Concave Profile
12-Spoke Design
Engineered for Porsche Center Lock Fitments
I-Beamed Spoke Technology
I-Beamed Spoke Spans Along the Lip
Very Lightweight, Stiff, and Strong
Generous Brake Clearance
Forged 6061-T6 Aluminum
Fits All Porsche Center Lock Systems for Street and Track, Including Cup Car and RSR Applications
Customizable Finish Options
Legendary Forgeline Quality
