Rental
Daily Rental of HANS Device at AMP
from $50.00
Rent An Up-To-Date HANS Device Right At AMP!
Discovery Parts store in the AMP paddock carries a full complement of HANS devices to make sure every driver is safe out on the race track.
You can rent a HANS device for up to four days. Your rental is due back to Discovery Parts by 5pm on the final day of your rental.
Sparco
Sparco Lap Nomex Gloves
$195.00
Sparco Lap Nomex Gloves
The Sparco Lap racing glove is a glove that packs high-end features into a reasonably priced package. The Lap features a unique elastic cuff system which is extremely comfortable and was designed to work well with the Sparco Competition suit. The Lap also features “hybrid” finger stitching. The fingers are both external and internal stitched for comfort. The external stitching is used on the palm side of the finger so the driver does not have any pressure points from the stitch lines. The upper side of the finger is traditional internal stitching. This gives the glove excellent durability as the stitches are not exposed. The palm features high-grip smooth silicon for maximum performance.
SPARCO LAP AUTO RACE GLOVE TECHNOLOGY
Unique Elastic Cuff System
Pre-Curved Hybrid Fingers
Anatomically correct palm that contours to the natural shape of the hand
Printed smooth high-grip silicon increases grip, comfort and dexterity
FIA 8856-2018 and SFI 3.3/5 approved
SKU 001316
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Sparco
Sparco Eagle LT Driver Race Suit
$699.00
$999.00
Sparco Eagle LT Race Suit
The Eagle LT race suit is a limited-edition suit available only for the US market. The Eagle LT race suit features an all-new design in two colorways. This is a limited edition suit so only available while supplies last.
SINGLE LAYER CONSTRUCTION, MULTI-LAYER PROTECTION
The Eagle LT race suit is the result of over 3 years of research and development. Sparco has patented a new technology called HOCOTEX® which revolutionizes the way racing suits are made. This new exclusive Sparco technology creates a single layer fabric which has the protection of what is normally achieved by a multi-layer fabric. The Eagle LT race suit is FIA approved.
SPARCO EAGLE LT RACE SUIT UNPRECEDENTED COMFORT
Thanks to HOCOTEX®, the Eagle LT race suit is three times more breathable than a suit produced using traditional technology. The use of this relatively thinner fabric along with large side and back stretch panels and 360 degree arm gussets give the Eagle LT race suit ultimate flexibility and comfort. The Eagle LT race suit uses a new stretch material called Eagle fabric. This Eagle Fabric is lighter, more breathable and abrasion resistant than the traditional stretch material.
SPARCO EAGLE LT RACE SUIT IMPROVED FIRE RESISTANCE
Traditional racing suits have layers of fabric sewn together with a quilted pattern. The quilting provides air space between the layers which bloats in a fire, this provides thermal protection to the driver. HOCOTEX® creates a honeycomb structure with internal air cells that ensure the driver even more fire protection. Traditional box quilting creates an average of 300 air chambers in a size 52 suit. The Eagle LT has over 60,000 microcell air chambers which provide a 10 to 12% increase in heat protection performance.
SPARCO EAGLE LT RACE SUIT TECHNOLOGY
Single layer construction, multi-layer protection
Three times more breathable than a standard suit
Full 360o arm gussets
Large stretch panels on the sides and back with new breathable fabric
Three years of research and development
HOCOTEX® patented Sparco technology, made in Italy
FIA approved
SPARCO EAGLE LT RACE SUIT SIZE CHART
Roux Helmets
Roux Radio - Drink Tube Connector Assembly NASCAR Plug
$129.00
Roux Radio / Drink Tube Connector Assembly NASCAR Plug
Connecting to the left side of your Roux helmet, the Roux NASCAR radio plug/drink tube connector attaches to your helmet with a slight push and releases quickly by pressing the red fast release push button on the Roux helmet connector assembly. This is the NASCAR protocol (3c) that is used in most older radio systems.
The drink tube is open ended to connect to your Longacre Drink Kit, Camelback or any other drink system you may use. The dry-break hidden inside the connector assembly guarantees a no-drip easy connection.
Roux Radio / Drink Tube Connector Assembly NASCAR Plug Details:
Manufacturer: Roux
Manufacturer part number: RXHA12-15
Radio protocol: NASCAR (longer and thinner than your Roux helmet)
Coil cord: Yes
Dry break included on drink connector: Yes
[img-6535-left-large_default]
OMP
OMP Pro Mech Evo Nomex Pit Gloves
$205.00
OMP Pro Mech Evo Nomex Pit Gloves
The latest and greatest fire retardant mechanic’s gloves from OMP, offer excellent protection against heat and impacts. Reinforcements in high protective silicon rubber sheet with perforated soft upper fabric located in critcal impact areas (knuckels, between thumb and forefinger, lower part of the arm). Inner seams, anti-slip silicon rubber palm and fingers.
FIA 8856-2018 Homologated
Sparco
Sparco RW-4 Nomex Socks
$59.00
Sparco RW-4 Nomex Socks
The RW-4 line of undergarments are designed to provide both comfort and protection. The RW-4 features a mid-calf soft-touch interlock fabric.
SPARCO RW-4 NOMEX SOCK TECHNOLOGY
Soft and comfortable
Regular Fit
FIA 8856-2018 Approved
HJC
HJC H10 Carbon Fiber Helmet SA2020
$799.99
HJC H10 Carbon Fiber SA2020 Helmet
Ever wonder if you could look and feel like a Formula 1 champ without having to sell a kidney?
Introducing the HJC H10 Carbon Fiber SA2020 Helmet: The Game-Changing Carbon Delight!
"Budget" and "Carbon Fiber" in the same sentence? Yeah, you heard right! Dive into the world of premium auto racing without burning a hole in your pocket. The HJC H10 Carbon Fiber Helmet is the shining beacon in the sea of auto racing helmets, proving you don’t need to splurge to sport the best.
Let's start with the bragging rights:
Ultra-Lightweight: With its dreamy Carbon Fiber Composite Weave shell, this bad boy weighs in at just 3.2lbs. So, when you're cruising down that racetrack, your neck won’t be staging a protest!
Superior Fit: Those advanced CAD technology boffins sure knew what they were doing. This helmet fits so well; Cinderella's shoe is jealous.
Cool as a Cucumber: Thanks to the ACS Advanced Channeling System, feel that rush of cool air as it sends all that sweaty racing heat packing!
Visionary Views: Fancy a new perspective? Opt for shields in Amber, Dark Smoke, Dark Blue, or even the edgy Black Chrome. And for those who love the extra oomph, there’s even an optional clear spoiler.
Safety First: Snell SA2020 Approved. Enough said.Crystal Clear: Comes with a polycarbonate anti-fog shield, and those tear-off posts? A blessing for the serious racers.Secured in Style: The pre-installed M6 terminals are ready for your head and neck restraints, and the double D-ring retention system ensures everything's snug and tight.Ventilation Galore: Improved front ventilation ensures you’re not sweating buckets in there.Your Perfect Fit: Sizes ranging from XS-XXL. We've got you covered, no matter what your noggin size is!Discover Excellence in Racing with the HJC H10 Carbon Fiber SA2020 Helmet. The Ideal Choice for All Racers, it's Engineered for Comfort with a Fire Resistant Moisture-Wicking ComforT Interior and Advanced Ventilation System for Cool Racing Comfort. Snell SA2020 Approved, Ultra-Lightweight Carbon Fiber Composite Weave Shell, and Superior Fit Using CAD Technology. Experience the ACS Advanced Channeling System for Optimal Airflow. Optional Shields and Clear Spoiler Available. Get Race-Ready with HJC H10 Carbon.
HJC H10 CARBON FIBER AUTO RACING HELMET FEATURES:
Snell SA2020 Approved
Helmet weight: 3.2lbs (size L)
Carbon Fiber Composite Weave shell is extremely lightweight
Superior fit and comfort using advanced CAD technology
ACS Advanced Channeling System provides front-to-back airflow flushing heat and humidity up and out
Optional shields available: Amber, Dark Smoke, Dark Blue, and Black Chrome
Optional clear spoiler is available
Polycarbonate anti-fog shield with tear-off posts
Pre-installed M6 terminals for head and neck restraints
Improved front ventilation
Double D-ring retention system
Sizes XS-XXL
HJC H10 CARBON FIBER HELMET FREQUENTLY ASKED QUESTIONS (FAQ):
Remember that safety is paramount in auto racing, and choosing the right helmet and maintaining it properly is essential for your protection on the track. Always consult with the professionals at Discovery Parts and refer to the manufacturer's guidelines for specific questions about your racing helmet.
Why do I need a racing helmet?
Auto racing helmets are designed to protect drivers from head injuries and fire during high-speed races and crashes. They are a crucial safety component in motorsports.
How do I choose the right size HJC Carbon Fiber helmet? You should measure your head's circumference using a flexible tape measure, then refer to the manufacturer's sizing chart to select the appropriate size helmet. Please review our blog posting on how to properly fit your new auto racing helmet from Discovery Parts.
What safety standards should I look for in a racing helmet? Look for helmets that meet safety standards like Snell and FIA depending on your racing discipline. These standards ensure the helmet's safety and quality. DOT helmets are designed for street use and not for racing and track use.
What's the difference between full-face and open-face, and helmets? Full-face helmets provide the most protection with a complete face shield, while open-face helmets cover the top and sides of the head.
Can I use a motorcycle helmet for auto racing? No, motorcycle helmets do not provide the same level of protection as auto racing helmets, as they are designed for different purposes. It's recommended to use a helmet specifically designed for auto racing which includes fire protection in addition to impact protection.
How often should I replace my HJC Carbon Fiber auto racing helmet? Auto racing helmets should be replaced every 5-10 years, depending on the manufacturer's recommendations and usage. If the helmet is involved in a crash, it should be replaced immediately.
Are expensive racing helmets safer than budget ones? Safety standards dictate the minimum safety requirements, so even budget-friendly helmets can offer protection. However it’s important to consider how lower-priced helmets are meeting the required testing standards. More expensive helmets are lighter, smaller, are constructed of superior materials, and often come with additional features then less expensive helmets.
How do I maintain and clean my HJC Carbon Fiber racing helmet? Follow the manufacturer's instructions for cleaning and maintenance. You should clean the exterior, interior and shield with the Molecule Helmet Care Kit.
Do I need to wear a balaclava under my HJC Carbon Fiber racing helmet? Balaclavas are typically not required for Driver's Education events, however they make wearing a helmet much, much more comfortable. Balaclavas will provide fire protection (if fire rated), help keep your helmet lining clean and order free by absorbing the majority of sweat while using it, and additionally balaclavas make putting your helmet on and taking it off by protecting your ears and keeping from from folding over when you helmet is worn. Discovery Parts recommends balaclavas from Alpinestars, OMP, Sabelt, Sparco, and Stand21. If you are entering sanctioned auto racing events, balaclavas will be required for fire protection.
Is the SNELL SA Rating important? The Snell SA2020 certification is a safety standard established by the Snell Memorial Foundation for auto racing helmets. It sets the criteria and requirements that helmets must meet to be considered safe and suitable for use in motorsport events. Snell SA2020 certification is highly regarded in the motorsports industry and is often required or recommended by racing organizations and events. It signifies that a helmet has passed rigorous testing to provide maximum safety for drivers in various motorsport disciplines, including road racing, NASCAR, Formula 1, drag racing, and more. It's essential for drivers to check the specific safety standards required by the racing organizations they participate in to ensure compliance.
Is the FIA helmet certification important? Yes, FIA (Fédération Internationale de l'Automobile) certification is crucial for auto racing helmets, especially in the context of international motorsport events and many national and regional racing series in the USA. The FIA 8859-2015 standard is commonly associated with racing helmets used in various motorsport disciplines. Helmets certified to FIA 8859-2015 met the safety requirements set by the FIA and were widely accepted in many racing series
Which helmet certification is the most stringent and the hardest to meet? The FIA 8860-2018 certification is considered the most stringent and advanced helmet certifications available for auto racing helmets, and it is often associated with top-tier motorsport categories like Formula 1. It's important to note that the FIA 8860-2018 helmets offer a high level of protection and their use is mandatory in many racing series. Drivers should always check the regulations of the racing series they intend to participate in to ensure compliance with helmet certification standards.
Can I wear glasses with my HJC Carbon Fiber helmet? Most helmets have provisions for wearing glasses or goggles, but check the design to be sure. Most manufacturers feature helmet models with wider eye ports to better accommodate eye glasses.
Are carbon fiber helmets better? Carbon fiber helmets are lightweight and strong, a top choice for racers. But remember, certification matters most.
Can I use a used helmet for racing? It's best to buy a new helmet. Used helmets may have unseen damage or be out of date on safety standards.
Can I buy replacement parts for my HJC Carbon Fiber helmet, like visors or padding? Many manufacturers offer replacement parts, including visors and padding, to extend your helmet's lifespan.
How can I prevent helmet fogging during races? Anti-fog sprays and inserts are available to help keep your visor clear during races.
What's the importance of proper helmet ventilation? Proper ventilation helps keep you cool and comfortable during races, reducing the risk of heat exhaustion.
How do I store my HJC Carbon Fiber helmet between races? Keep it in a cool, dry place away from direct sunlight and chemicals in a bag designed to store your auto racing helmet, like the Discovery Parts Evo Helmet Bag.
Where can I buy a certified racing helmet? You should only buy from a professional authorized dealer who has sold thousands of helmets. You can find all the best brands at Discovery Parts online at www.discoveryparts.com or visit our retail store at Atlanta Motorsports park or at one of the hundreds of race and track day events we attend and support.
Remember, safety should always come first in auto racing. Choose a certified helmet that meets the necessary standards to protect yourself on the track.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Sparco
Sparco Slalom+ Fabric Racing Shoes
$175.66
$219.00
Sparco Slalom+ Fabric Racing Shoes
The Slalom+ Fabric is a mid-top design that features a unique suede and fabric upper. The combination of durable suede and fire resistant fabric allow the shoe to stretch and breath. This gives a comfortable fit and offers a high level of protection. The Slalom+ Fabric has a comfortable cushioned inner sole and an all-new slim rubber sole that is anti-slip, anti-static, and oil- and fuel-resistant.
Available in three color choices: Black/Black, Blue/Black or Red/Black in European sizes 42 to 48.
The Sparco Slalom+ Fabric is SFI and FIA approved.
SPARCO SLALOM+ FABRIC RACE SHOE TECHNOLOGY
High-quality suede mid-boot design
Unique suede/fabric construction
Cushioned inner sole
Lightweight outer sole for excellent pedal feel
Anti-slip, anti-static, fuel- and oil-resistant sole
SFI and FIA approved
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Sabelt
Sabelt Hero Pro TB-10 Racing Shoes
$199.00
$399.00
Sabelt Hero Pro TB-10 Racing Shoes
The Sabelt Hero Pro TB-10 is a racing shoe at the pinnacle of motorsport shoe design. Its hallmarks of greatness: sleek styling, supple leather, and a sole that lets you feel the fine details of feedback through your pedals.
The exceptional Hero Pro TB-10 combines Sabelt’s many years of racing experience with modern design and ultra-premium materials. The result is an exceptional racing shoe that maximizes the interface between car and driver.
SABELT HERO TB-10 RACING SHOE FEATURES:
FIA 8856-2018 certified
Supple, ultra-lightweight Italian leather for exceptional style and comfort.
Custom sole construction for weight reduction and unmatched grip.
Hans
HANS Sport 3 Tether Kits
$59.95
HANS Sport III Tether For Post Anchors
Hans Device Replacement Tether For your Hans Sport III device with Post anchors. This Hans replacement tether and slider kit fits the Hans Sport III device and comes in the standard 18" length and others for special applications.
HANS Sport III Tether For Post Anchors Details:
Manufacturer: Simpson
Manufacturer part number: TK.1441.3
Some race series require replacements between 2 and 5 years
A great upgrade for an older fixed tether device.
Kit includes one tether, two tether carriers and 4 new mount screws
Length of X-Short tether: 16" / 406cm TK14317XS
Length of Short tether: 17" / 431cm TK14317S
Length of Standard tether: 18" / 457cm TK14317
Length of Long tether: 19" / 482cm TK14317L
If you have a medium or large device, please stay with the standard 18" length
Racing Optics
Stilo Tearoff ST5 Thick 4mil
$34.95
Stilo ST5 Thick 4mil Tearoff Pack qty 12 (4 Sleeves of 3)
Protect Your Stilo ST5 Helmet Shield from rocks, dirt, and debris with these 4 mil thick tearoffs. Measuring 4 mil thickness (the most popular thickness for open cockpit and harsh environment racers), it is intended for road racing and/or dirt track use. This package of 4 mil tear-offs are in 4 stacks of 3 per package (12 tear-offs in all). Now you can greatly extend the life of your Stilo ST5 shield by drastically reducing pitting and scratches.
Stilo 4 mil Tearoff Pack Quantity 10 (4 Sleeves of 3) Details:
Manufacturer: Stilo
Manufacturer part numbers: 3459C
Thickness each: 4 mil
Gradient: Clear
Fits All Stilo ST5 Helmets: Yes
Fits All Stilo ST4F and Stilo ST4W Helmets: No
4 Stacks of 3 each
Note: This is the thicker of tearoffs (4 mil) for your Stilo ST5 series helmets. It is used primarily in Road Racing Open Cockpit or other harsh environment race tracks
Stilo
Stilo ST6 Helmet Shield Visors
from $144.00
Stilo ST6 Helmet Shield Visors
Colorful anti-fog/anti-scratch shields for your Stilo ST6 (non-ABP) helmet
These Stilo visors are a great way to add some color to your racing life! Stilo offers a wide variety of shield options including many popular iridium colors. All Stilo shields have an anti-fog and anti-scratch coating and are made for a perfect fit on your Stilo ST6 helmet (both the GT and N "naked" versions).
Chillout Systems
Chillout Pro Sport Socks
$69.00
CHILLOUT PRO SPORT FIRE RESISTANT SOCKS
The CHILLOUT PRO SPORT underlayers are turning the racing world on its head with the latest technology which will give you a performance advantage on the track. The Pro Sport flame and heat resistance underlayers are thermal regulating which can reduce your skin termperature by up to eight degrees which will quicken your reflexes and reaction time on the track. The Ultralight weight materials prioritize airflow to help you regulate your body temperature during the heat of battle on the track. The Chillout Pro Sport underwear is the only FIA & SFI approved thermal regulating underlayers available on the planet to be sure you meet the most stringent homologation standards for your race sanctioning body. The Chillout Pro Sport underlayers sport antibacterial technology woven into every thread to neutralize 99% of bacteria to keep you fresh and focused on the track regardless of the length of your driving stint. If you are serious about winning, then you need the Chillout Pro Sport underlayers in your gear bag.
FIA Homologation Standard: 8856-2018
SFI Homologation Specification: 3.3
Sizes: S / M / L
Colors: BLACK, WHITE
Composition:28% Aramide, 28% Viscose FR, 22% Modacrylic, 18% Cotton, 4% Elastane
PERFORMANCE CHILLOUT PRO SPORT SOCKS
SIZING AND USAGE CHILLOUT PRO SPORT SOCKS
All users shall ensure that the Chillout Pro Sport garments are not too tight, as this reduces the level of protection, and that they are also comfortable to wear under the actual conditions of use.
In order to obtain the maximum protection, all the clothing required in Apendix L (Chaper III, Article 2) to the FIA International Sporting Code should be used.
Wearers are warned of the particular vulnerability of the neck, wrists, and ankles. The neck, wrist, and ankles shall always be covered by at least two articles of protective clothing.
The balaclava and top underlayers shall overlap by a minimum of 3cm / 1.2" around the driver's neck, except at the front center line where there shall be 8cm / 3.2" overlap. The top and bottom underlayers shall overlap by a minimum of 7cm / 2.8" around the drivers waist.
MAINTENANCE CHILLOUT PRO SPORT SOCKS
Chillout PRO SPORT Flame Resistant underwear must be cleaned and ironed according to the instructions on the label and always to be handled with care. Drivers should replace any and all items as soon as they show signs of wear. Please note that the materials are light sensitive and should not be exposed to direct sunlight for a prolonged period of time. Sunlight especially can cause changes in the shade of colors and begin the premature aging of the materials.
EMBROIDERY/LABELS CHILLOUT PRO SPORT SOCKS
Protective clothing, while designed to offer protection against heat and flames, may not safeguard against all potential hazards encountered in automobile racing. It is essential that users adhere to the guidelines outlined in this manual. Proper sizing and usage are imperative for optimal protection. Users should ensure that garments are not overly tight, as this can compromise protection levels, and that they are comfortable to wear under actual usage conditions. For maximum protection, it is recommended to utilize all clothing items specified in Appendix L (Chapter III, Article 2) of the FIA International Sporting Code. Wearers should pay particular attention to the vulnerability of the neck, wrists, and ankles, ensuring they are covered by at least two articles of protective clothing. Specific overlap measurements are provided for various garment combinations, detailed within this manual. Embroidery and badges should be applied in accordance with fireproof standards outlined in ISO 15025. Only the garment manufacturer is authorized to apply advertising through printing or transfers, and certification from the manufacturer is necessary for any customized garments. Any alterations or customizations not meeting these standards may invalidate the garment's homologation, potentially resulting in penalties or disqualification during events. In case of uncertainty regarding advertising additions, it is advisable to consult the manufacturer.
CLEANING/MAINTENANCE CHILLOUT PRO SPORT SOCKS
The clothing items must be cleaned and ironed following the instructions provided on the label and handled with due care and attention at all times. Garments showing signs of wear should be replaced promptly. It is important to be aware that the materials used in the clothing are sensitive to light and should not be exposed to direct sunlight for prolonged periods. Exposure to sunlight can result in changes to the colors and premature aging of the materials. If your clothing sustains damage such as tears, abrasions, or exposure to heat and flames, it must be replaced. However, if minor tears can be repaired, the same materials and fabrics originally used in manufacturing must be utilized for the repair. Chillout Systems bears no responsibility for any damage incurred by users or third parties due to improper use, abuse, or incorrect maintenance of the clothing, including any improperly repaired garments.
EEC CERTIFICATION/GUARANTEE CHILLOUT PRO SPORT SOCKS
Chillout Systems clothing is certified in compliance with Directive 89/686/EEC and the essential safety requirements outlined in Document II of the directive. Certification has been issued by CSI s.P.a.'s head office, a certified body of the European Commission (No. 0497), with additional production controls conducted by CSI s.P.a. itself.
Paragon
Paragon Guardian Female Connector
from $17.99
Paragon Guardian Female Hose
PARAGON GUARDIAN CONNECTOR FEATURES
1/4" or 5/16" connector that work with your Paragon Viking system as well as others.
Sold individually, you'll need two to adapt a garment properly.
SYSTEM COMPATIBILITY (Paragon/Coolshirt/Momo/F.A.S.T.):
Paragon’s Guardian Connector is offered as a replacement for existing 1/4” or 5/16" Guardian Connectors used on non-Paragon branded hose sets, as well as all Paragon Hose Sets. The Guardian Connectors are Paragon’s emergency release option allowing an easy disconnect when a quick pull motion is applied to the connected garment.
Bell
Bell M.8 Carbon Fiber Helmet SA2020
$1,159.95
Bell M.8 Carbon Fiber Auto Racing Helmet SA2020
Bell M.8 Carbon Fiber Helmet: When "Fast and Furious" Meets Haute Couture!
Welcome to the helmet equivalent of that supercar you've been eyeing. Imagine the roar of the engine, the thrill of the chase, and... the utmost comfort? That's right! The Bell M.8 Carbon Fiber Helmet has been sculpted, not just for speed, but for those of us who like to race in style, with our sunglasses on and not a hair out of place.
Why the Bell M.8 Isn't Your Regular Joe Helmet:
Crystal Clear Vision: Boasts a vast eye port opening. Perfect for the suave James Bonds of the racetrack who love their sunglasses.
Nearly Custom Fit: With seven sizes available, from XS to XL+, it's like this helmet was crafted just for you. No more 'one size fits most' shenanigans!
Keep It Cool, Keep It Fresh: Integrated channels let you sip on a drink or get radio updates without skipping a beat.
Carbon Fiber Fabulousness: Lightweight, robust, and oh-so-chic! If helmets had a runway, this would be the showstopper.
Need-to-Know Specs:
Safety First: Rocking the Snell SA2020 and FIA 8859-2015 certifications.
Light as a Feather: Weighing in at 2.9 lbs. (Size M). You’ll forget it's even there.
Strength on Steroids: Thanks to a high-pressure molding system.
Climate Control: Exceptional ventilation because sweaty is not sexy.
All-Weather Warrior: Its hollow synthetic rubber gasket seal is your shield against water, dust, and those annoying bits of track debris.
Accessory Ready: From tinted shields to head and neck restraint anchors, we've got you covered.
Final Lap: Revving engines, the smell of burnt rubber, and the Bell M.8 Carbon Fiber Helmet – the holy trinity of an unmatched racing experience. If you're ready to turbocharge your gear and feel the wind in a way you've never before, this helmet is calling your name. Click 'Add to Cart' and let's elevate your race day!
The Bell M.8 Carbon Fiber SA2020 is designed with comfort in mind while keeping with traditional Bell M style. Its large eye port opening and adjustable forehead vents to reduce potential fogging are designed for the driver who wears sunglasses or eyeglasses.
The Bell M.8 Carbon Fiber SA2020 is available in seven sizes, from XS to XL+, providing a near-custom fit with a wide spectrum of sizes. The helmet is certified for use with HANS devices with integrated M6 female threaded inserts for HANS post anchors, which are sold separately.
The Bell M.8 Carbon Fiber SA2020 includes a clear face shield and black visor strip, shield hardware with a hex wrench, and a drawstring helmet bag to keep it all together.
Snell SA2020 and FIA 8859-2015 approved.
BELL M.8 CARBON FIBER AUTO RACING HELMET FEATURES:
Snell SA2020 and FIA 8859-2015 homologated.
Carbon fiber shell is ultra-lightweight (Size M = 2.9 lbs./1.3 kg).
High-pressure molding system improves shell strength.
High-impact custom bead absorbing liner is multi-piece/multi-density for low- and high-velocity impact protection.
Integrated channels for optional drinking tube and radio microphone systems.
Black Comfort-Plus FR¬ interior fabric for excellent moisture wicking.
Exceptional fit with multi-density foam interior.
Best-in-class ventilation system includes direct-flow chin vents and manual level air intakes.
Hollow synthetic rubber gasket seal keeps out water, dust, and dirt.
Large eye port for eyeglass wearers.
Includes clear SRV-8 3mm SRV shield (SRV-1 pivot system). Tinted shields also available .
M6 terminal hardware and hex wrench for Head and Neck Restraint anchors.
Available only in GLOSS carbon fiber finish.
This helmet will ship to you with signature required for delivery.
BELL M.8 CARBON FIBER AUTO RACING HELMET FREQUENTLY ASKED QUESTIONS (FAQ):
Remember that safety is paramount in auto racing, and choosing the right helmet and maintaining it properly is essential for your protection on the track. Always consult with the professionals at Discovery Parts and refer to the manufacturer's guidelines for specific questions about your racing helmet.
Why do I need a racing helmet?
Auto racing helmets are designed to protect drivers from head injuries and fire during high-speed races and crashes. They are a crucial safety component in motorsports.
How do I choose the right size Bell M8 Carbon Fiber Auto Racing helmet? You should measure your head's circumference using a flexible tape measure, then refer to the manufacturer's sizing chart to select the appropriate size helmet. Please review our blog posting on how to properly fit your new auto racing helmet from Discovery Parts.
What safety standards should I look for in a Bell M8 Carbon Fiber Auto Racing helmet? Look for helmets that meet safety standards like Snell and FIA depending on your racing discipline. These standards ensure the helmet's safety and quality. DOT helmets are designed for street use and not for racing and track use.
What's the difference between full-face and open-face, and helmets? Full-face helmets provide the most protection with a complete face shield, while open-face helmets cover the top and sides of the head.
Can I use a motorcycle helmet for auto racing? No, motorcycle helmets do not provide the same level of protection as auto racing helmets, as they are designed for different purposes. It's recommended to use a helmet specifically designed for auto racing which includes fire protection in addition to impact protection.
How often should I replace my Bell M8 Carbon Fiber Auto Racing helmet? Auto racing helmets should be replaced every 5-10 years, depending on the manufacturer's recommendations and usage. If the helmet is involved in a crash, it should be replaced immediately.
Are expensive racing helmets safer than budget ones? Safety standards dictate the minimum safety requirements, so even budget-friendly helmets can offer protection. However it’s important to consider how lower-priced helmets are meeting the required testing standards. More expensive helmets are lighter, smaller, are constructed of superior materials, and often come with additional features then less expensive helmets.
How do I maintain and clean my Bell M8 Carbon Fiber Auto Racing helmet? Follow the manufacturer's instructions for cleaning and maintenance. You should clean the exterior, interior and shield with the Molecule Helmet Care Kit.
Do I need to wear a balaclava under my Bell M8 Carbon Fiber Auto Racing helmet? Balaclavas are typically not required for Driver's Education events, however they make wearing a helmet much, much more comfortable. Balaclavas will provide fire protection (if fire rated), help keep your helmet lining clean and order free by absorbing the majority of sweat while using it, and additionally balaclavas make putting your helmet on and taking it off by protecting your ears and keeping from from folding over when you helmet is worn. Discovery Parts recommends balaclavas from Alpinestars, OMP, Sabelt, Sparco, and Stand21. If you are entering sanctioned auto racing events, balaclavas will be required for fire protection.
Is the SNELL SA Rating important? The Snell SA2020 certification is a safety standard established by the Snell Memorial Foundation for auto racing helmets. It sets the criteria and requirements that helmets must meet to be considered safe and suitable for use in motorsport events. Snell SA2020 certification is highly regarded in the motorsports industry and is often required or recommended by racing organizations and events. It signifies that a helmet has passed rigorous testing to provide maximum safety for drivers in various motorsport disciplines, including road racing, NASCAR, Formula 1, drag racing, and more. It's essential for drivers to check the specific safety standards required by the racing organizations they participate in to ensure compliance.
Is the FIA helmet certification important? Yes, FIA (Fédération Internationale de l'Automobile) certification is crucial for auto racing helmets, especially in the context of international motorsport events and many national and regional racing series in the USA. The FIA 8859-2015 standard is commonly associated with racing helmets used in various motorsport disciplines. Helmets certified to FIA 8859-2015 met the safety requirements set by the FIA and were widely accepted in many racing series
Which helmet certification is the most stringent and the hardest to meet? The FIA 8860-2018 certification is considered the most stringent and advanced helmet certifications available for auto racing helmets, and it is often associated with top-tier motorsport categories like Formula 1. It's important to note that the FIA 8860-2018 helmets offer a high level of protection and their use is mandatory in many racing series. Drivers should always check the regulations of the racing series they intend to participate in to ensure compliance with helmet certification standards.
Can I wear glasses with my Bell M8 Carbon Fiber Auto Racing helmet? Most helmets have provisions for wearing glasses or goggles, but check the design to be sure. Most manufacturers feature helmet models with wider eye ports to better accommodate eye glasses.
Are carbon fiber helmets better? Carbon fiber helmets are lightweight and strong, a top choice for racers. But remember, certification matters most.
Can I use a used helmet for racing? It's best to buy a new helmet. Used helmets may have unseen damage or be out of date on safety standards.
Can I buy replacement parts for my Bell M8 Carbon Fiber Auto Racing helmet, like visors or padding? Many manufacturers offer replacement parts, including visors and padding, to extend your helmet's lifespan.
How can I prevent helmet fogging during races? Anti-fog sprays and inserts are available to help keep your visor clear during races.
What's the importance of proper helmet ventilation? Proper ventilation helps keep you cool and comfortable during races, reducing the risk of heat exhaustion.
How do I store my Bell M8 Carbon Fiber Auto Racing helmet between races? Keep it in a cool, dry place away from direct sunlight and chemicals in a bag designed to store your auto racing helmet, like the Discovery Parts Evo Helmet Bag.
Where can I buy a certified racing helmet? You should only buy from a professional authorized dealer who has sold thousands of helmets. You can find all the best brands at Discovery Parts online at www.discoveryparts.com or visit our retail store at Atlanta Motorsports park or at one of the hundreds of race and track day events we attend and support.
Remember, safety should always come first in auto racing. Choose a certified helmet that meets the necessary standards to protect yourself on the track.
We take immense pride in offering a wide selection of Bell auto racing helmets, designed to meet the demands of professional racers and motorsports enthusiasts alike. Bell has been at the forefront of helmet innovation and safety for decades, earning a reputation as a top-tier brand in the racing world.
Key Features of Bell Racing Helmets:
Unparalleled Safety: Bell racing helmets are engineered to the highest safety standards, including certifications like Snell and DOT approval, ensuring your head is well-protected in high-speed racing conditions.
Premium Materials: Crafted with precision, Bell helmets feature carbon fiber construction, making them lightweight yet incredibly strong for maximum protection.
Comfort and Fit: Bell's commitment to comfort is evident in the design of their helmets. They offer a range of sizes, and many models have customizable padding to ensure a snug fit.
Aerodynamic Design: Bell helmets are designed with aerodynamics in mind, reducing wind resistance and enhancing performance on the track.
Our Extensive Bell Auto Racing Helmet Collection:
Bell HP77 Carbon Fiber 8860-2018 Helmet
Bell HP7 Carbon Fiber 8860-2018 Helmet
Bell HP6 8860-2018 Helmet
Bell RS7C LTWT Carbon Fiber Helmet
Bell GT6 RD Carbon Fiber Helmet
Bell RS7 Carbon Fiber Helmet
Bell BR8 Carbon Fiber Helmet
Bell GT6 Carbon Fiber Helmet
Bell GP.3 Carbon Fiber Helmet
Bell GTX.3 Carbon Fiber Helmet
Bell M.8 Carbon Fiber Helmet
Bell RS7 Pro Helmet
Bell GT6 Helmet
Bell BR8 Helmet
Bell GP.3 Helmet
Bell GTX.3 Helmet
Bell M.8 Helmet
Bell K1 Pro Helmet
Bell K1 Sport Helmet
Bell Mag Rally Helmet
Frequently Asked Questions About Bell Helmets:
Where are Bell helmets made? Bell helmets are proudly manufactured in the Bahrain, maintaining the highest quality standards.
Is Bell a good helmet brand? Yes, Bell is renowned for its commitment to safety, innovation, and performance, making it a trusted choice among professional racers and enthusiasts.
Are Bell helmets Snell approved? Yes, many Bell helmets are Snell approved, meeting rigorous safety standards.
Are Bell helmets FIA approved? Absolutely, several Bell helmets are FIA 8860-2018 certified, ensuring they meet the most stringent safety requirements.
Do Bell helmets run small? Bell offers a variety of sizes and often provides sizing charts to help you choose the right fit. It's important to measure your head and refer to their guidelines for a proper fit.
For racers who demand the best in safety and performance, Bell auto racing helmets are the ultimate choice. Explore our extensive collection to find the perfect helmet for your racing needs.
Bell Racing Helmets: Bell Racing Helmets are renowned for their exceptional quality and safety features. With a wide range of models to choose from, you can find the perfect Bell Racing Helmet to suit your racing needs.
Bell Racing Helmet: Each Bell Racing Helmet is a product of meticulous craftsmanship and cutting-edge technology. When you wear a Bell Racing Helmet, you're choosing a helmet that prioritizes your safety and performance on the track.
Bell Race Helmets: Bell Race Helmets come in various styles and designs to cater to different types of motorsports. Whether you're into karting, open-wheel racing, or stock car racing, Bell has race helmets tailored for your specific discipline.
Bell Race Helmet: Your Bell Race Helmet is more than just protective gear; it's a crucial part of your racing ensemble. The aerodynamic design of a Bell Race Helmet helps reduce wind resistance, giving you a competitive edge.
Bell Helmet: A Bell Helmet is a symbol of trust in motorsports. Professional racers and amateurs alike rely on the comfort, safety, and durability that Bell Helmets provide during intense racing conditions.
Bell Helmets: Bell Helmets have a rich history of innovation and excellence. The extensive range of Bell Helmets ensures that there's a model suitable for every racer, whether you're a seasoned pro or just starting in the sport.
Bell Carbon Fiber Helmet: Bell Carbon Fiber Helmets combine the lightweight properties of carbon fiber with advanced safety features. These helmets are a top choice for racers seeking the ultimate in protection without sacrificing comfort.
Race Car Helmet: A race car helmet is a fundamental piece of safety gear for any racer. Bell's race car helmets are engineered to meet the rigorous demands of motorsports, ensuring you stay safe on the track.
Racing Helmet: Your racing helmet is your shield against potential accidents. Bell Racing Helmets are designed to offer superior impact protection while maintaining optimal visibility and ventilation.
Racing Helmets: Racing helmets are a racer's best friend. Bell Racing Helmets, with their reputation for quality and safety, are the go-to choice for many professionals and enthusiasts in the racing community.
Bell Racing: Bell Racing is synonymous with excellence in the motorsports industry. Their commitment to research, development, and testing has solidified their position as a leader in racing helmet technology.
Auto Racing Helmet: When it comes to auto racing, your helmet is your first line of defense. Bell Auto Racing Helmets are engineered to withstand the rigors of high-speed racing, ensuring your head is protected.
Auto Racing Helmets: Auto racing helmets from Bell are designed to provide optimal head protection while maintaining lightweight and aerodynamic qualities, allowing you to perform at your best.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Stilo
Stilo To NASCAR Helmet Cable
$86.52
$96.13
Stilo Helmet Adapter To Go To NASCAR Radio Systems
Genuine Stilo to NASCAR helmet adapter cord to connect the female communication port on your Stilo Helmet to any female NASCAR-style car harness. This is the regular-length Stilo to NASCAR Adapter Cable (4C to 3C) with a 6-inch coiled section.
Stilo to NASCAR Adapter Cable (4C to 3C) Details:
Manufacturer: Stilo
Manufacturer part number: AC0206
Helmet end: Stilo 4C (looks like IMSA, but wired differently)
Chassis end: NASCAR 3C
Cord type: Semi-coiled
