Chillout Systems
Chillout Pro Sport Underlayer Shirt
$195.00
CHILLOUT PRO SPORT Fire Resistant Shirt
The CHILLOUT PRO SPORT underlayers are turning the racing world on its head with the latest technology which will give you a performance advantage on the track. The Pro Sport flame and heat resistance underlayers are thermal regulating which can reduce your skin temperature by up to eight degrees which will quicken your reflexes and reaction time on the track.
The Ultralight weight materials prioritize airflow to help you regulate your body temperature during the heat of battle on the track. The Chillout Pro Sport underwear is the only FIA & SFI approved thermal regulating underlayers available on the planet to be sure you meet the most stringent homologation standards for your race sanctioning body. The Chillout Pro Sport underlayers sport antibacterial technology woven into every thread to neutralize 99% of bacteria to keep you fresh and focused on the track regardless of the length of your driving stint. If you are serious about winning, then you need the Chillout Pro Sport underlayers in your gear bag.
FIA Homologation Standard: 8856-2018
SFI Homologation Specification: 3.3
Sizes: XS-XXL
Colors: BLACK, CHARCOAL, WHITE
Composition: 42% M-Aramide, 42% Viscose FR, 16% EA
PERFORMANCE CHILLOUT PRO SPORT UNDERLAYER SHIRT
SIZING AND USAGE CHILLOUT PRO SPORT UNDERWEAR
All users shall ensure that the Chillout Pro Sport garments are not too tight, as this reduces the level of protection, and that they are also comfortable to wear under the actual conditions of use.
In order to obtain the maximum protection, all the clothing required in Apendix L (Chaper III, Article 2) to the FIA International Sporting Code should be used.
Wearers are warned of the particular vulnerability of the neck, wrists, and ankles. The neck, wrist, and ankles shall always be covered by at least two articles of protective clothing.
The balaclava and top underlayers shall overlap by a minimum of 3cm / 1.2" around the driver's neck, except at the front center line where there shall be 8cm / 3.2" overlap. The top and bottom underlayers shall overlap by a minimum of 7cm / 2.8" around the drivers waist.
MAINTENANCE CHILLOUT PRO SPORT UNDERWEAR
Chillout PRO SPORT Flame Resistant underwear must be cleaned and ironed according to the instructions on the label and always to be handled with care. Drivers should replace any and all items as soon as they show signs of wear. Please note that the materials are light sensitive and should not be exposed to direct sunlight for a prolonged period of time. Sunlight especially can cause changes in the shade of colors and begin the premature aging of the materials.
EMBROIDERY/LABELS CHILLOUT PRO SPORT UNDERLAYER SHIRT TOP
Protective clothing, while designed to offer protection against heat and flames, may not safeguard against all potential hazards encountered in automobile racing. It is essential that users adhere to the guidelines outlined in this manual. Proper sizing and usage are imperative for optimal protection. Users should ensure that garments are not overly tight, as this can compromise protection levels, and that they are comfortable to wear under actual usage conditions. For maximum protection, it is recommended to utilize all clothing items specified in Appendix L (Chapter III, Article 2) of the FIA International Sporting Code. Wearers should pay particular attention to the vulnerability of the neck, wrists, and ankles, ensuring they are covered by at least two articles of protective clothing. Specific overlap measurements are provided for various garment combinations, detailed within this manual. Embroidery and badges should be applied in accordance with fireproof standards outlined in ISO 15025. Only the garment manufacturer is authorized to apply advertising through printing or transfers, and certification from the manufacturer is necessary for any customized garments. Any alterations or customizations not meeting these standards may invalidate the garment's homologation, potentially resulting in penalties or disqualification during events. In case of uncertainty regarding advertising additions, it is advisable to consult the manufacturer.
CLEANING/MAINTENANCE CHILLOUT PRO SPORT UNDERLAYER SHIRT TOP
The clothing items must be cleaned and ironed following the instructions provided on the label and handled with due care and attention at all times. Garments showing signs of wear should be replaced promptly. It is important to be aware that the materials used in the clothing are sensitive to light and should not be exposed to direct sunlight for prolonged periods. Exposure to sunlight can result in changes to the colors and premature aging of the materials. If your clothing sustains damage such as tears, abrasions, or exposure to heat and flames, it must be replaced. However, if minor tears can be repaired, the same materials and fabrics originally used in manufacturing must be utilized for the repair. Chillout Systems bears no responsibility for any damage incurred by users or third parties due to improper use, abuse, or incorrect maintenance of the clothing, including any improperly repaired garments.
EEC CERTIFICATION/GUARANTEE CHILLOUT PRO SPORT SHIRT TOP
Chillout Systems clothing is certified in compliance with Directive 89/686/EEC and the essential safety requirements outlined in Document II of the directive. Certification has been issued by CSI s.P.a.'s head office, a certified body of the European Commission (No. 0497), with additional production controls conducted by CSI s.P.a. itself.
Chillout Systems
Chillout Pro Sport Socks
$69.00
CHILLOUT PRO SPORT FIRE RESISTANT SOCKS
The CHILLOUT PRO SPORT underlayers are turning the racing world on its head with the latest technology which will give you a performance advantage on the track. The Pro Sport flame and heat resistance underlayers are thermal regulating which can reduce your skin termperature by up to eight degrees which will quicken your reflexes and reaction time on the track. The Ultralight weight materials prioritize airflow to help you regulate your body temperature during the heat of battle on the track. The Chillout Pro Sport underwear is the only FIA & SFI approved thermal regulating underlayers available on the planet to be sure you meet the most stringent homologation standards for your race sanctioning body. The Chillout Pro Sport underlayers sport antibacterial technology woven into every thread to neutralize 99% of bacteria to keep you fresh and focused on the track regardless of the length of your driving stint. If you are serious about winning, then you need the Chillout Pro Sport underlayers in your gear bag.
FIA Homologation Standard: 8856-2018
SFI Homologation Specification: 3.3
Sizes: S / M / L
Colors: BLACK, WHITE
Composition:28% Aramide, 28% Viscose FR, 22% Modacrylic, 18% Cotton, 4% Elastane
PERFORMANCE CHILLOUT PRO SPORT SOCKS
SIZING AND USAGE CHILLOUT PRO SPORT SOCKS
All users shall ensure that the Chillout Pro Sport garments are not too tight, as this reduces the level of protection, and that they are also comfortable to wear under the actual conditions of use.
In order to obtain the maximum protection, all the clothing required in Apendix L (Chaper III, Article 2) to the FIA International Sporting Code should be used.
Wearers are warned of the particular vulnerability of the neck, wrists, and ankles. The neck, wrist, and ankles shall always be covered by at least two articles of protective clothing.
The balaclava and top underlayers shall overlap by a minimum of 3cm / 1.2" around the driver's neck, except at the front center line where there shall be 8cm / 3.2" overlap. The top and bottom underlayers shall overlap by a minimum of 7cm / 2.8" around the drivers waist.
MAINTENANCE CHILLOUT PRO SPORT SOCKS
Chillout PRO SPORT Flame Resistant underwear must be cleaned and ironed according to the instructions on the label and always to be handled with care. Drivers should replace any and all items as soon as they show signs of wear. Please note that the materials are light sensitive and should not be exposed to direct sunlight for a prolonged period of time. Sunlight especially can cause changes in the shade of colors and begin the premature aging of the materials.
EMBROIDERY/LABELS CHILLOUT PRO SPORT SOCKS
Protective clothing, while designed to offer protection against heat and flames, may not safeguard against all potential hazards encountered in automobile racing. It is essential that users adhere to the guidelines outlined in this manual. Proper sizing and usage are imperative for optimal protection. Users should ensure that garments are not overly tight, as this can compromise protection levels, and that they are comfortable to wear under actual usage conditions. For maximum protection, it is recommended to utilize all clothing items specified in Appendix L (Chapter III, Article 2) of the FIA International Sporting Code. Wearers should pay particular attention to the vulnerability of the neck, wrists, and ankles, ensuring they are covered by at least two articles of protective clothing. Specific overlap measurements are provided for various garment combinations, detailed within this manual. Embroidery and badges should be applied in accordance with fireproof standards outlined in ISO 15025. Only the garment manufacturer is authorized to apply advertising through printing or transfers, and certification from the manufacturer is necessary for any customized garments. Any alterations or customizations not meeting these standards may invalidate the garment's homologation, potentially resulting in penalties or disqualification during events. In case of uncertainty regarding advertising additions, it is advisable to consult the manufacturer.
CLEANING/MAINTENANCE CHILLOUT PRO SPORT SOCKS
The clothing items must be cleaned and ironed following the instructions provided on the label and handled with due care and attention at all times. Garments showing signs of wear should be replaced promptly. It is important to be aware that the materials used in the clothing are sensitive to light and should not be exposed to direct sunlight for prolonged periods. Exposure to sunlight can result in changes to the colors and premature aging of the materials. If your clothing sustains damage such as tears, abrasions, or exposure to heat and flames, it must be replaced. However, if minor tears can be repaired, the same materials and fabrics originally used in manufacturing must be utilized for the repair. Chillout Systems bears no responsibility for any damage incurred by users or third parties due to improper use, abuse, or incorrect maintenance of the clothing, including any improperly repaired garments.
EEC CERTIFICATION/GUARANTEE CHILLOUT PRO SPORT SOCKS
Chillout Systems clothing is certified in compliance with Directive 89/686/EEC and the essential safety requirements outlined in Document II of the directive. Certification has been issued by CSI s.P.a.'s head office, a certified body of the European Commission (No. 0497), with additional production controls conducted by CSI s.P.a. itself.
Chillout Systems
Chillout Remote Control (AirCon Cooler Only)
$250.00
Chillout Remote Control For AirCon Helmet Cooler
**Designed for the AirCon Helmet Cooler System only**
Featuring a 10-foot cord and color digital display, this dash-mountable Chillout Remote Control is designed to turn your AirCon Helmet Cooler on and off as well as adjust the temperature from anywhere in your vehicle.
This is a must-have addition if you're mounting your Chillout AirCon System in an out-of-reach area of your vehicle like the trunk or rear seat area.
CHILLOUT REMOTE CONTROL (AIRCON) DETAILS
Manufacturer: Chillout Systems
Manufacturer part no.: CO-RCAC1
Weight: 5 oz.
Dimensions: 2.5"L x 1.5"W x 0.5"H
Cord length: 10 feet
REMOTE CONTROL INCLUDES
Remote control unit
10 foot cord
Paragon
Paragon Drain Kit
$36.99
Paragon Drain Kit
Paragon’s Drain Kit is the ultimate accessory for draining water from Paragon cooling garments, hose sets, coolers, and bags.
The Paragon Drain Kit includes two male connectors and two female connectors.
Paragon
Paragon Blower Air Filter Screen
$11.99
Paragon Blower Air Filter Screen
Paragon’s Blower Air Filter Screen is a metal screen perfectly sized for the Paragon 240 CFM blower . The Blower Air Filter Screen helps keep large debris from entering the blower. The Paragon Blower Air Filter Screen slots perfectly into the intake side of your Paragon blower with no appreciable effect on airflow.
Paragon
Paragon Arctic Fox 12V Cooler Bag
from $337.99
Paragon Arctic Fox 12V Cooler Bag
Paragon’s Arctic Fox 12V Cooler Bag was designed specifically for drivers seeking a compact cooling solution. The Arctic Fox Cooler Bag contains a heavy-duty internal bladder that houses a compact 12-volt fluid pump, leaving ample room for ice and water. It can be direct-wired into your car's 12V electrical system, or adapted to plug into any 12V accessory outlet.
The Paragon Guardian female hose connectors are Paragon’s emergency release option allowing you to easily disconnect from the cooler bag with a quick pull on the connected hose set or cooling garment.
On the back of the Paragon Arctic Fox Cooler Bag, custom webbing with grommets gives you multiple mounting options. The Arctic Fox Cooler Bag is available in 2L and 6L sizes, and works seamlessly with most cool suit brands.
Paragon Arctic Fox 12V Cooler Bag Details
Manufacturer: Paragon
Manufacturer part nos.: 60-24000 (6L) or 50-24000 (2L)
Power (wired): 12V
Weight: 4 lbs (6L) or 3 lbs (2L)
Developed for use in all types of racing, the Paragon Arctic Fox Bag Cooler provides drivers with a no-compromise personal cooling solution in race cars that have limited space or no place to mount a standard, hard-sided cooler.
The Paragon Arctic Fox Bag Cooler provides the same superior cooling as Paragon's legendary fixed-cooler systems. It keeps drivers cool and mentally alert, especially during those final laps when heat fatigue and dehydration can be at their worst.
Paragon
Paragon Angled Helmet Fitting (1.25")
$18.99
Paragon 1.25" Angled Helmet Fitting
Paragon’s Angled Helmet Fitting is custom-made for connecting Paragon’s 1.25” Air Hose to your helmet's air-inlet with a diameter of 1.3”. The fitting's 45° angle helps keep overall height to a minimum, avoiding overhead obstructions like roll cage bars to help maintain your range of movement.
Paragon
Paragon Arctic Fox Pro Portable Bag Cooler (6L)
$618.99
Paragon Arctic Fox Pro 6 Liter Li-Ion Bag Cooler
Paragon’s Arctic Fox Pro Cooler Bag is the amped-up, battery-powered version of their 6-liter Arctic Fox Cooler Bag, one of the most versatile portable cooling bags on the market. The Arctic Fox Pro Cooler Bag takes driver cooling performance up a notch, with an interior heavy-duty bladder that houses a 12V pump and more capacity for ice and cooling water. Yet it weighs only 4 lbs. including the Li-ion battery!
The front-exit Guardian bulkhead connectors are Paragon’s emergency release option, allowing the driver to easily disconnect with a quick pull on the connected hose set. The Arctic Fox Pro Cooler Bag has a 6L capacity, and it works seamlessly with most cool suit brands.
Paragon Arctic Fox Pro Portable Bag Cooler Details
Manufacturer: Paragon
Manufacturer part nos.: 61-24000
Included Battery: 7.4V Li-ion rechargeable
Battery Charger: included
Interior capacity: 6 liters
Weight: 4 lbs.
Dimensions in inches: 12x10x10
Developed for use in all types of racing, the Paragon Arctic Fox Pro Cooler Bag provides drivers with a no-compromise personal cooling solution in race cars that have limited space or no place to mount a standard, hard-sided cooler.
The Arctic Fox Pro Cooler Bag is especially convenient for road racers and track-day enthusiasts with more than one car, as it's easily moved from one car to another as needed. Drag racers are also discovering its versatility, and it has also become very popular with driving-school instructors with its Lithium-ion battery powered portability.
The Arctic Fox Pro Cooler Bag provides the same superior cooling as Paragon's legendary fixed-cooler systems. It keeps drivers cool and mentally alert, especially during those final laps when heat fatigue and dehydration can be at their worst.
Paragon
Paragon Arctic Wolf/Fox Pro Replacement Battery Pigtail
$20.99
Paragon Arctic Wolf/Fox Pro Battery Pigtail
Paragon’s Arctic Wolf/Fox Battery Pigtail is available as a replacement for the factory-installed pigtail on any Arctic Wolf Pro or Arctic Fox Pro cooler bag.
Paragon Arctic Wolf/Fox Pro Battery Pigtail Details
Manufacturer: Paragon
Manufacturer part no.: 04-29400
Length: 10 inches
Weight: 1 lbs.
Paragon
Paragon Laundry Bag
$13.99
Paragon Laundry Bag
Paragon’s Laundry Bag is the perfect accessory for any Paragon cooling garment. The nylon Paragon Laundry Bag comes in white or black, and protects your Paragon cooling garment investment during repeated laundering.
Paragon Laundry Bag Details
Manufacturer: Paragon
Manufacturer part no.: 01-59000 (black), 02-59000 (white)
Colors: black or white
Dimensions: 10" x 6" x 1"
Weight: 1 lbs.
Paragon
Paragon Viking Cooler (12V)
$260.99
Paragon Viking 10L Cooler (12V)
Paragon’s Viking 10L Cooler was designed to be your ultimate companion for beating the heat! The Viking Cooler is built durable enough to stand up to race weekends, and powerful enough with its 12-volt pump to provide constant circulation of chilled water through a Paragon cooling garment.
Paragon Guardian female bulkhead connectors are an emergency release design, allowing easy disconnection with a quick pull on the connected hose set or cooling garment. The Viking 10L Cooler works seamlessly with most cooling garment brands.
Paragon Viking Cooler Details
Manufacturer: Paragon
Manufacturer part no.: 10-20000
Cooler capacity: 10 liters
Operating voltage: 12V
Dimensions (external): 14"L x 10"W x 10"H
Weight (dry): 4 lbs
Paragon
Paragon Viking Extreme Multi-Person Cooler (110V)
$1,099.99
Paragon Viking Extreme 110V Multi-Person Cooler
Paragon’s 57L Viking Extreme multi-person 110V cooler is a terrific multi-person coolre for racers with access to 110-volt power. In fact, keeping cool with the Viking Extreme is so great on those sweltering race days, we would go so far as to get a generator just to plug in a Paragon Extreme cooler.
The large-capacity Paragon Viking Extreme cooler is built to be durable enough to stand up to race weekends, and ultra-efficient with its 110-volt fluid pump providing strong, constant circulation of chilled water through several Paragon cooling garments at the same time. This large-capacity American-made cooler works exclusively with Paragon cooling garments.
A Cool Race Crew Is A Safe, Effective Crew
The Paragon Viking Extreme Cooler keeps you and your team cool, comfortable, and alert so everyone can perform at their best in the heat of competition. Heat fatigue is a big factor in loss of focus and concentration. Now everyone can stay cool waiting in the pits for each fuel stop or driver change.
Paragon Viking Extreme Cooler Details
Manufacturer: Paragon
Manufacturer part no.: 52-23000
Cooler capacity: 57 liters
Operating voltage: 110V
Dimensions (external): 20"L x 20"W x 20"H
Weight (dry): 29 lbs
Cooling garment connections: 6 outlets/inlets
Paragon
Paragon Viking Extreme Max Team Cooler (110V)
$1,699.99
Paragon Viking Extreme Max 110V Team Cooler
Paragon’s 61L Viking Extreme Max multi-person 110V cooler is an absolutely amazing multi-person cooling option for racers with access to 110-volt power. In fact, keeping cool with the Viking Extreme Max is so fantastic on those sweltering afternoons in the paddock or pits, we would get a generator just to plug in an Extreme Max cooler.
The 61L capacity Paragon Viking Extreme Max cooler is built in the USA to be durable enough to stand up to race weekends, and ultra-efficient with its 110-volt fluid pump providing strong, constant circulation of chilled water through several Paragon cooling garments at the same time. This large-capacity cooler works exclusively with Paragon cooling garments.
American Made Race Team Cooling Perfection
The American-made Paragon Viking Extreme Max Cooler keeps you and your team cool, comfortable, and alert so everyone can perform at their best in the heat of competition. Heat fatigue is a big factor in loss of focus and concentration. Now everyone can stay cool waiting in the pits for each fuel stop or driver change.
Paragon Viking Extreme Max Cooler Details
Manufacturer: Paragon
Manufacturer part no.: 80-23100
Cooler capacity: 61 liters
Operating voltage: 110V
Dimensions (external): 30.5"L x 17.25"W x 17"H
Weight (dry): 34 lbs
Cooling garment connections: 6 outlets/inlets
Paragon
Paragon Arctic Wolf Back Pack
$512.99
Paragon Arctic Wolf Cooling Back Pack
Paragon’s Arctic Wolf Back Pack was designed specifically for racing drivers and crew who need an ergonomic, portable cooling solution. The Paragon Arctic Wolf Back Pack comes with a 7.4V, 4.4AH lithium-ion battery, battery charger, on/off rocker switch, and adjustable straps. This makes it one of the most versatile portable cooling bags on the market.
The Arctic Wolf Back Pack contains an interior heavy-duty bladder that houses a 12-volt pump in a compact space, leaving plenty of room for ice and water. The Arctic Wolf Back Pack works seamlessly with most cooling garment brands.
The Guardian male connectors are Paragon’s emergency release design, allowing you to easily disconnect with a quick pull on the connected hose set.
Paragon Arctic Wolf Back Pack Details
Manufacturer: Paragon
Manufacturer part nos.: 41-24000
Included battery: 7.4V Li-ion rechargeable
Battery charger: included
Weight: 5 lbs.
Dimensions in inches: 20x16x4
Developed for use in all types of racing, the Paragon Arctic Wolf Back Pack provides drivers and crew with a no-compromise personal cooling solution that can be used in the paddock or stowed securely in the car for on-track cooling as well.
The Arctic Wolf Back Pack provides the same superior cooling as Paragon's legendary fixed-cooler systems. It keeps you cool and mentally alert, especially during those late laps when heat fatigue and dehydration can be at their worst.
Paragon
Paragon Arctic Wolf/Fox Battery Charger
$38.99
Paragon 4.4AH Li-Ion Arctic Wolf/Fox Battery
Paragon’s Wolf/Fox Battery Charger is designed for use with the Paragon Arctic Wolf/Fox Li-Ion Battery. The Arctic Wolf/Fox Battery Charger has an indicator light that illuminates bright green when your battery is fully charged. Plugs into any standard US 110-120V electrical outlet.
Paragon Arctic Wolf/Fox Battery Charger Details
Manufacturer: Paragon
Manufacturer part no.: 03-29400
Input voltage: 110-120V
Battery included: no
Weight: 1 lb.
Paragon
Paragon Hose End Fitting (1.5")
$16.99
Paragon 1.5" Hose End Fitting
Paragon’s 1.5” Hose End Fitting is custom made for connecting Paragon 1.5” Air Hose to the PVC inlet of your Paragon Viking Pro or Viking Pro Dual cooler.
