Auto Racing Supplies And Safety Equipment – Page 8

Chillout Systems Chillout Systems 4" Carbon Fiber Air Duct Plenum $250.00

Chillout Systems Carbon Fiber Air Duct Plenum Forcing fresh air to your cooler is the most efficient way to increase cooling performance and reduce amp draw from your electrical system. This plenum fits perfectly to the intake side of your Quantum Cooler, allowing much cooler air to be forced through the system via any four-inch duct (cooler, ducting, and intake scoop not included). A minimum 150 CFM blower (sold separately) should be used in conjunction with the plenum in order to cool properly. This carbon fiber plenum attaches via automotive-grade adhesive tape, creating a firm seal to keep the cooler pressurized with incoming cool air. This forces cool air all the way through the system and back out the exhaust side of the cooler, the most efficient way to reach maximum cooling capacity. Coupling the Chillout Systems Air Duct Plenum with your Quantum Cooler ensures no cool air is wasted, maximizing the effectiveness of the system.

Stilo Stilo ST6 FN ABP Helmet Shield from $144.00

Stilo ST6 FN ABP Helmet Shield Compatible only with Stilo ST6 FN FIA 8860-2018 and FIA 8859-2024 ABP helmets. Stilo offers a wide variety of shield colors and tint options, covering all racing conditions, for the Stilo ST6 FN FIA 8860-2018 ABP and FIA 8859-2024 helmets. These shields are made to fit your Stilo ST6 FN ABP helmet perfectly. Since 2019, the most stringent FIA 8860-2018 ABP (Advanced Ballistic Protection) helmet standard has been in effect for Formula 1. This latest standard builds frontal penetration protection into the helmet shell. The New FIA standard drove Stilo engineers to design and develop the Stilo ST6 FN helmet, along with this new shield design. While looking very similar to the standard Stilo ST6 shield, there is a slight shape difference and overall height difference. Stilo ST6 FN FIA 8860-2018 ABP FIA 8859-2024 Helmet Shield Details: Manufacturer: Stilo Qty in kit: one (1) shield Shield stocking bag included: Yes Fits Stilo ST5 FN FIA8860-2018 ABP and 8859-2024helmets: Yes Fits any other Stilo helmet: No ABP is an Acronym for Advanced Ballistic Protection in the latest FIA F1 standard

Racing Optics Stilo Perimeter Seal Tearoff ST5 Thin 2mil $35.00

Stilo ST5 Thin 2mil Perimeter Seal Tearoff Pack qty 30 (3 Sleeves of 10) Protect Your Stilo ST5 Helmet Shield From Rocks, Dirt, and Debris with these 2 mil thick tearoffs. Measuring 2 mil thickness (the most popular thickness for dirt track racers), it is intended for road racing and/or dirt track use. The perimeter seal system used in these tearoffs provides a tighter fit against the visor, blocking out dirt, dust, and water from getting between the visor and tearoff stack. This package of 2 mil tear-offs are in 3 stacks of 10 per package (30 tear-offs in all). Now you can greatly extend the life of your Stilo ST5 shield by drastically reducing pitting and scratches. Stilo ST5 2mm Perimeter Seal Tearoff Pack Quantity 30 (3 Sleeves of 10) Details: Manufacturer: Stilo Manufacturer part numbers:10259CP Thickness each: 2 mil Gradient: Clear Fits All Stilo ST5 Helmets: Yes Fits All Stilo ST4F and Stilo ST4W Helmets: No 3 Stacks of 10 tear-offs glued together Note: This is the thinner of tearoffs (2 mil) for your Stilo ST5 series helmets. It is used primarily in Dirt Track Racing where you need more pulls in a race

Sparco Sparco RW-7 Nomex Socks $65.00

Sparco RW-7 Nomex Socks The RW-7 line of undergarments are designed to provide both comfort and protection. The RW-7 is made from a unique mixture of very comfortable and soft fibers. The undershirts are made with seamless sides with raglan sleeves to enhance comfort. The RW-7 includes knee-length socks. The RW-7 undershirts and underpants are designed to fit close to the body due to the soft stretchable fabric. If you prefer a loose fit, please choose one size up. RW-7 shirts and underpants are treated with Sparco’s X-Cool treatment, which draws heat from the body surface to cool the driver. In addition to cooling the driver, x-cool treatment has an anti-bacterial effect. SPARCO RW-7 NOMEX SOCK TECHNOLOGY FIA 8856-2018 Approved Seamles, stretchable Nomex in key areas for mobility Designed for comfort while in the driving position Minimal external seams for increased driver comfort

Trac-Com Trac-Com Helmet Speaker Kit V2 $120.00

Trac-Com Helmet Speaker Kit V2 This helmet kit is designed for drivers looking to add integrated speakers and a microphone to their helmet. Designed in-house by RaceCom to be a universal solution, the Helmet Kit V2 is compatible with most motorsport helmets regardless the size and shape. The Instructor Helmet Kit includes the V2 Helmet Kit with an IMSA male cable end.What makes the V2 kit different? The new V2 helmet kit takes lessons learned from the V2 Student headset and applies them to bring you the loudest, most complete, highest quality universal helmet kit available. This kit features the brand new R7 digital mic and powerfully tuned speakers all built into a compact package that will easily install to almost any helmet quickly and comfortably. TRAC COM HELMET SPEAKER KIT V2 FEATURES: Two powerfully tuned speakers New R7 digital microphone Male IMSA plug on headset Strong, sturdy RaceCom cables have been pull-tested by a certified lab Meticulous build process proven to outlast and outperform all others TRAC COM HELMET SPEAKER KIT V2 INCLUDES: Helmet Speaker Kit V2

-31% sale

Sparco Eagle LT Race Suit - Limited Edition Closeup Image

00
DAYS 00
HRS 00
MIN 00
SEC

Sparco Sparco Eagle LT Driver Race Suit $699.00 $999.00

Sparco Eagle LT Race Suit The Eagle LT race suit is a limited-edition suit available only for the US market. The Eagle LT race suit features an all-new design in two colorways. This is a limited edition suit so only available while supplies last. SINGLE LAYER CONSTRUCTION, MULTI-LAYER PROTECTION The Eagle LT race suit is the result of over 3 years of research and development. Sparco has patented a new technology called HOCOTEX® which revolutionizes the way racing suits are made. This new exclusive Sparco technology creates a single layer fabric which has the protection of what is normally achieved by a multi-layer fabric. The Eagle LT race suit is FIA approved. SPARCO EAGLE LT RACE SUIT UNPRECEDENTED COMFORT Thanks to HOCOTEX®, the Eagle LT race suit is three times more breathable than a suit produced using traditional technology. The use of this relatively thinner fabric along with large side and back stretch panels and 360 degree arm gussets give the Eagle LT race suit ultimate flexibility and comfort. The Eagle LT race suit uses a new stretch material called Eagle fabric. This Eagle Fabric is lighter, more breathable and abrasion resistant than the traditional stretch material. SPARCO EAGLE LT RACE SUIT IMPROVED FIRE RESISTANCE Traditional racing suits have layers of fabric sewn together with a quilted pattern. The quilting provides air space between the layers which bloats in a fire, this provides thermal protection to the driver. HOCOTEX® creates a honeycomb structure with internal air cells that ensure the driver even more fire protection. Traditional box quilting creates an average of 300 air chambers in a size 52 suit. The Eagle LT has over 60,000 microcell air chambers which provide a 10 to 12% increase in heat protection performance. SPARCO EAGLE LT RACE SUIT TECHNOLOGY Single layer construction, multi-layer protection Three times more breathable than a standard suit Full 360o arm gussets Large stretch panels on the sides and back with new breathable fabric Three years of research and development HOCOTEX® patented Sparco technology, made in Italy FIA approved SPARCO EAGLE LT RACE SUIT SIZE CHART

sale

00
DAYS 00
HRS 00
MIN 00
SEC

Sparco Sparco X-Light Racing Shoes from $249.00 $359.00

Sparco X-Light Racing Shoes The lightweight X-Light shoe was developed using feedback from Sparco’s professional drivers. This development program created some unique features for the new shoe. The X-light does not have a traditional tongue, it uses a durable fabric called Jaquard that acts as an upper stretch panel. This unique upper gives ultimate comfort as the shoe can stretch and breath. The same Jaquard material is on the backside of the shoe where it allows the Achilles unrestricted movement. The X-Light has the next generation sole made in pure lightweight rubber which enhances the pedal feel and is also anti-static, fuel and oil resistant. The mid-boot design features a full ultra-soft calf skin leather upper with perforated vents. The X-Light has a pre-formed cushioned insole. The X-Light is available in four colors: White/Red, Blue/White, Grey/Orange and Black in European sizes 37-48. The Sparco X-Light is FIA approved. SPARCO X-LIGHT RACE SHOE TECHNOLOGY Unique stretch tongue upper panel Ultra-soft calf skin leather mid-boot design with Achilles stretch panel for mobility and comfort Pre-formed cushioned insole Next-gen sole in pure lightweight rubber for excellent pedal feel Anti-static, fuel and oil resistant sole Speed laces and standard laces included FIA approved

-34% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Alpinestars Alpinestars GP Tech v3 Driver Race Suit $1,199.95 $1,799.95

Alpinestars GP Tech v3 Driver Race Suit The GP Tech v3 race suit features an outer shell twill material developed exclusively for Alpinestars which is combined with an innovative aramidic-based knit lining for optimum levels of comfort, fire protection, light weight and comfort. Thanks to the introduction of the aramidic base lining with an open weave structure, this race suit is superbly breathable, and these levels are further enhanced by the breathable panels on the side. The GP Tech v3 race suit also incorporates lightweight stretchable panels at the center back, lower back, elbow, crotch and knee zone to provide great flexibility both in and out of the car. ALPINESTARS GP TECH V3 RACE SUIT PROTECTION Certified to the FIA 8856-2018 homologation standard Super-lightweight and breathable multi-layer suit incorporating thin stretchable panels, for maximum comfort and effective regulation of body temperature Nomex® anti-static outer shell fabric for exceptional heat and flame-resistant proprieties Sold with laundry bag for convenience and effective material fiber protection ALPINESTARS GP TECH V3 RACE SUIT DETAILS Strategically positioned Formula One derived stretch panels at center back and spine, lower back, elbows, crotch and knees enhance flexibility Alpinestars fully-floating arm construction with stretchable knit fabric ensures minimal material resistance while driving Soft and thin wrist and ankle cuffs for maximum comfort and reduced weight Soft collar with knit fabric and secure hook and loop closure for improved comfort Alpinestars exclusive shoulder epaulette construction provides an effective feature for the extraction of the driver in the event of a crash Printed logos help maintain suit’s material integrity and reduce weight Premium YKK thin lightweight zipper with double slider Thigh pockets for convenient, unobtrusive storage Athletic fit Weight: 325g/m2

Roux Helmets Roux Radio - Drink Tube Connector Assembly NASCAR Plug $129.00

Roux Radio / Drink Tube Connector Assembly NASCAR Plug Connecting to the left side of your Roux helmet, the Roux NASCAR radio plug/drink tube connector attaches to your helmet with a slight push and releases quickly by pressing the red fast release push button on the Roux helmet connector assembly. This is the NASCAR protocol (3c) that is used in most older radio systems. The drink tube is open ended to connect to your Longacre Drink Kit, Camelback or any other drink system you may use. The dry-break hidden inside the connector assembly guarantees a no-drip easy connection. Roux Radio / Drink Tube Connector Assembly NASCAR Plug Details: Manufacturer: Roux Manufacturer part number: RXHA12-15 Radio protocol: NASCAR (longer and thinner than your Roux helmet) Coil cord: Yes Dry break included on drink connector: Yes [img-6535-left-large_default]

-51% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Sabelt Sabelt Hero Pro TB-10 Racing Shoes $199.00 $399.00

Sabelt Hero Pro TB-10 Racing Shoes The Sabelt Hero Pro TB-10 is a racing shoe at the pinnacle of motorsport shoe design. Its hallmarks of greatness: sleek styling, supple leather, and a sole that lets you feel the fine details of feedback through your pedals. The exceptional Hero Pro TB-10 combines Sabelt’s many years of racing experience with modern design and ultra-premium materials. The result is an exceptional racing shoe that maximizes the interface between car and driver. SABELT HERO TB-10 RACING SHOE FEATURES: FIA 8856-2018 certified Supple, ultra-lightweight Italian leather for exceptional style and comfort. Custom sole construction for weight reduction and unmatched grip.

Bell Bell 287 SRV Helmet Shields (Fits K1 Pro, K1 Sport, GP.2 Youth) from $69.95

Bell 287 SRV Helmet Shields (Fits K1 Pro, K1 Sport, GP.2 Youth) Bell's 3mm injection molded optically correct polycarbonate face shield. The 287 SRV 3mm shield uses the SRV-1 pivot kit, is compatible with tear offs and is available in a variety of colors. Bell recommends that you periodically change shields for better vision and safety. All shields come with adjustable tear-off posts. BELL 287 HELMET SHIELD TINT COLORS: Clear Light Smoke Dark Smoke Amber Silver Mirror Blue Mirror Gold Mirror

Bell Bell SE03 Helmet Shields (Fits GP.3 and GTX.3) from $99.95

Bell SE03 Helmet Shields (Fits GTX.3, GP.3, HP3) Bell SE03 Double Screen Anti-Fog (DSAF) helmet shields are specifically designed for the SA2015 Bell GP.3 and GTX.3 helmets (including carbon fiber models), and the SA2010 Bell HP3 Carbon Helmet. The Double Screen Anti-Fog treatment features variable thickness that exceeds 5mm in the field of vision for excellent clarity and fog-control. Bell recommends that you periodically change shields for better vision and safety. All shields come with adjustable tear-off posts. (Tear-offs not included.) BELL SE03 HELMET SHIELD TINT COLORS: Clear High-Resolution Amber Light Smoke Dark Smoke Blue Chrome Silver Chrome Gold Chrome Rainbow Mirror Red Metallic Multilayer Red, Blue or Green

HJC HJC Helmet Shields from $69.99

HJC AR-10 III and HX-10 III Replacement Shields Polycarbonate injection molded construction for superior visibility and durability. Hard coated anti-fog interior. Pre-installed tear off posts. Available in Dark Blue, Chrome, Amber, Dark Smoke, and Clear. Genuine HJC Helmet Shields and Parts bring new life to your HJC auto racing helmet. HJC shields in different tints keep you ahead of the pack in every racing condition.

Hans HANS Pro Ultra / Ultralite Tether Kits $59.95

HANS Pro Ultra / Ultralite / Sport 1 Tether Kits Replace the tether kit on your HANS Pro Ultra / Ultralite / Sport 1 if you're involved in an incident, or swap out your existing tether for a longer or shorter one. For use with Sliding tethers and post anchors only.

Sparco Sparco X-Light+ Racing Shoes $569.00

Sparco X-Light + Racing Shoes The Sparco X-Light + is the ultimate ultra-light weight racing shoe. It was designed for the top level of professional drivers looking to save weight in every possible way while maintaining safety and high performance. The X-Light + is the only racing shoe on the market featuring a full fabric upper. This unique fireproof stretch fabric was developed by Sparco engineers to be breathable and durable while maintaining heat- and flame-resistance. The X-Light + stretch fabric wraps around the foot like a second skin, preventing dust, soil, and other materials from entering the shoe. Kevlar cables woven into the upper give your foot just the right amount of support. This combination provides an extremely comfortable, highly breathable fit while offering a high level of protection. The X-Light + is also the only racing shoe on the market with a carbon fiber sole. This special carbon fiber was developed by Sparco Engineers in the Sparco OEM Seating Division. Uniquely developed to be flexible, this carbon fiber is inlayed into the sole and runs from the heel to the toe. Carbon fiber is visible through the ultra-thin, oil-resistant, antistatic sole, offering exceptional pedal sensitivity. The cushioned inner sole of the X-Light + has a unique printed silicon pattern, giving this racing shoe added traction and pedal feel. The X-Light + is available in two colors: White/Black and Blue/White, in sizes from 39 to 46. The Sparco X-Light + is FIA 8856-2018 approved. SPARCO X-LIGHT+ RACE SHOE TECHNOLOGY FIA 8856-2018 approved Ultra-light weight fire-retardant stretch fabric and soft leather construction Highly breathable upper fits like a second skin Full carbon fiber inlayed sole is ultra thin, antistatic, oil- and fuel-resistant Printed silicon cushioned inner sole for maximum pedal feel

Competition Motorsport CMS Performance Racing Gear Bag $99.95

CMS Performance Racing Gear Bag This high-quality gear bag is designed to carry everything you need for a weekend at the race track. Its large main compartment can be divided to keep your racing gear, helmet/HANS, etc. separate from your casual wear. It also features an expandable waterproof compartment to keep dirty or damp items separate. It features a durable heavy-duty nylon exterior with a padded interior held closed with heavy duty zippers for years of use. The CMS Performance Racing Gear Bag has three zippered compartments: a main compartment large enough for a fire suit, gloves, shoes, helmet, HANS, and other accessories; a front pocket to hold smaller gear and racing accessories; and a zippered "hamper" compartment to keep dirty or damp items separate. Includes three velcro dividers and a padded shoulder strap to make toting everything you need for a race weekend easy and convenient. DIMENSIONS: Main Compartment: 30" x 16" x 15" (76cm x 41cm x 38cm) Front Compartment: 21" x 11" x 2" (53cm x 28cm x 5cm)

Find anything you need

Driver