Bell Racing Helmets
Bell MAG-10 Carbon Fiber Helmet FIA8859-2024/SA2025
$1,299.95
Bell MAG-10 Carbon Fiber Helmet
This is a pre-order, shipping after Q3 2025.
The Bell MAG-10 Carbon is a lightweight open-face helmet for drivers who want carbon-shell performance, clear field of view, and all-day comfort in closed-cockpit and track-day environments. With modern ventilation, a long face shield, and hardware compatibility for coms and hydration, it’s a versatile choice for endurance, HPDE, and club racing.
Carbon Performance with Open-Face Visibility
The carbon shell helps reduce fatigue over long stints while the wide eyeport and long visor maximize peripheral vision and airflow. Factory M6 terminals support head-and-neck restraints. Interior materials are fire-resistant and designed for repeatable comfort and easy cleaning between sessions.
Helmet Details
Manufacturer: Bell Helmets
Construction: lightweight carbon fiber shell
Orientation: open-face with long clear visor
Homologation: FIA 8859-2024 and Snell SA2025
Hardware: factory-installed M6 HNR terminals
Comms/Hydration: routing-ready (components optional)
Finish: gloss carbon
Bell MAG-10 Carbon Fiber Helmet Key Features
Open-face carbon design for low weight and wide, unobstructed vision
Multi-density, multi-piece liner for impact energy management
Long clear visor with anti-fog-ready compatibility and broad coverage
Ventilation paths promote airflow for heat management in closed cabins
Routing-ready for radio microphone, speakers, and hydration tube (optional kits)
Factory M6 terminals for head-and-neck restraint systems
Interior uses fire-resistant comfort fabrics for durability and easy care
Bell MAG-10 Carbon Fiber Helmet FAQs
Is the MAG-10 legal for my series?It carries FIA 8859-2024 and Snell SA2025. Most club and regional series accept these; always verify event rules.
Who should choose an open-face helmet?Drivers in closed-cockpit cars who want maximum visibility, communication clarity, and reduced weight often prefer open-face designs.
Does it include head-and-neck restraint anchors?Yes. M6 terminals are factory-installed for HNR compatibility.
Can I add radio and hydration?Yes. The helmet is routing-ready for coms and drink tube hardware; add components to match your team’s setup.
What visor options are available?A clear long visor is standard; tinted and specialty visors are available separately to suit lighting and preference.
Can I wear glasses with this helmet?Yes. The open-face layout and liner shape accommodate most prescription frames comfortably.
Get carbon-shell performance, wide-open vision, and race-ready versatility. Order the Bell MAG-10 Carbon today and head to grid with confidence.
This helmet will ship with signature required for delivery.
Alpinestars
Alpinestars GP Pro Comp v2 Boot Cuff Driver Race Suit
$1,299.95
Alpinestars GP Pro Comp v2 Driver Race Suit (Boot Cuff)
The Alpinestars GP Pro Comp v2 race suit features an outer shell of Nomex material developed exclusively for Alpinestars, combined with a soft aramidic base knit lining for optimum levels of heat- and fire protection, light weight, and driver comfort. Thanks to the introduction of an open weave structure in the aramidic base lining, the Alpinestars GP Pro Comp v2 delivers excellent breathability. This is further reinforced by strategically-positioned knitted, stretchable, open-mesh panels on the back, crotch and armholes, giving the wearer additional air flow and flexibility.
The Alpinestars GP Pro Comp v2 race suit also incorporates innovative silicon grip detailing on the shoulders and lower back to prevent movement within the racing seat, help keep your HANS device in position, and reduce pressure on the shoulders.
ALPINESTARS GP PRO COMP V2 RACE SUIT DETAILS
Certified to the SFI 3.4/5 standard
Lightweight and breathable multi-layer suit incorporating mesh stretch panels for maximum comfort and effective body temperature regulation
Innovative silicon grip details on shoulders and lower back to provide more feeling/connection with the HANS device and racing seat
Formula One derived cable opening for cooling shirt hoses or communication wiring on the left of the body, covered by a self-closing flap to ensure maximum protection
Strategically positioned Formula One derived stretch mesh panels on the lower back and crotch for enhanced flexibility, both in and out of the car
ALPINESTARS GP PRO COMP V2 RACE SUIT CONSTRUCTION
Alpinestars fully-floating arm construction with stretchable knit fabric ensures minimal material resistance while driving
100% aramidic antistatic outer shell fabric for exceptional heat- and flame-resistance
Ribbed wrist and ankle cuffs for maximum comfort
Tall ribbed collar extends coverage of the neck, improving driver comfort and safety
Alpinestars exclusive shoulder epaulette construction provides for the extraction of the driver in the event of a crash
Premium YKK metal zipper with double slider
Thigh pockets for convenient, unobtrusive storage
"ALPINESTARS PROTECTS" slogan on the lower back of the lining, as used on Alpinestars F1 racing suits
Includes laundry bag for convenience and effective material fiber protection
Athletic/regular fit
Weight: 345 g/m2
ALPINESTARS GP PRO COMP V2 RACE SUIT SIZE CHART
Alpinestars
Alpinestars Stella GP Pro Comp v2 Women's Driver Race Suit
$1,299.95
Alpinestars Stella GP Pro Comp v2 Women's Driver Race Suit
The Stella GP Pro Comp v2 race suit for women features an outer shell material developed exclusively for Alpinestars which is combined with a soft aramidic base knit lining for optimum levels of comfort, protection, and light weight. Thanks to the introduction of this aramidic base lining, with its open-weave structure, the Stella GP Pro Comp v2 race suit delivers excellent breathability, which is further reinforced by strategically-positioned knitted, stretchable open mesh panels on the back, crotch, and armholes for additional airflow and flexibility both in and out of the car.
The Alpinestars Stella GP Pro Comp v2 race suit also incorporates innovative silicon grip technology applied to the shoulders and lower back to prevent any movement within your racing seat. This also helps keep your HANS device in place and helps reduce pressure on the shoulders.
ALPINESTARS STELLA GP PRO COMP V2 RACE SUIT DETAILS
Certified to the latest FIA 8856-2018 homologation standard
Female anatomical torso, leg, and arm paneling is patterned for optimum driving position fit
Lightweight, breathable multi-layer suit incorporating mesh stretch panels for maximum comfort and effective body temperature regulation
Innovative silicon grip detailing on shoulders and lower back to provide better feel from the racing seat and connection to the HANS device
Strategically positioned Formula One derived stretch mesh panels on the lower back and crotch for enhanced flexibility
ALPINESTARS STELLA GP PRO COMP V2 RACE SUIT CONSTRUCTION
Alpinestars fully-floating arm construction with stretchable knit fabric ensures minimal material resistance while driving
100% aramidic antistatic outer shell fabric for exceptional heat- and flame-resistance
Ribbed wrist and ankle cuffs for maximum comfort
Tall ribbed collar extends coverage of the neck and improves driver comfort
Alpinestars exclusive shoulder epaulette construction provides for the extraction of the driver in the event of a crash
Premium YKK metal zipper with double sliders
Thigh pockets for convenient, unobtrusive storage
"ALPINESTARS PROTECTS" slogan on the lower back of the lining, as used on Alpinestars F1 racing suits
Comes with a laundry bag for convenience and effective material fiber protection
Athletic/regular fit
Weight 345 g/m2
ALPINESTARS STELLA GP PRO COMP V2 RACE SUIT SIZE CHART
Alpinestars
Alpinestars GP Pro Comp v2 Driver Race Suit
$1,299.95
Alpinestars GP Pro Comp v2 Driver Race Suit
The Alpinestars GP Pro Comp v2 race suit features an outer shell of Nomex material developed exclusively for Alpinestars, combined with a soft aramidic base knit lining for optimum levels of heat- and fire protection, light weight, and driver comfort. Thanks to the introduction of an open weave structure in the aramidic base lining, the Alpinestars GP Pro Comp v2 delivers excellent breathability. This is further reinforced by strategically-positioned knitted, stretchable, open-mesh panels on the back, crotch and armholes, giving the wearer additional air flow and flexibility.
The Alpinestars GP Pro Comp v2 race suit also incorporates innovative silicon grip detailing on the shoulders and lower back to prevent movement within the racing seat, help keep your HANS device in position, and reduce pressure on the shoulders.
ALPINESTARS GP PRO COMP V2 RACE SUIT DETAILS
Certified to the SFI 3.4/5 standard
Lightweight and breathable multi-layer suit incorporating mesh stretch panels for maximum comfort and effective body temperature regulation
Innovative silicon grip details on shoulders and lower back to provide more feeling/connection with the HANS device and racing seat
Formula One derived cable opening for cooling shirt hoses or communication wiring on the left of the body, covered by a self-closing flap to ensure maximum protection
Strategically positioned Formula One derived stretch mesh panels on the lower back and crotch for enhanced flexibility, both in and out of the car
ALPINESTARS GP PRO COMP V2 RACE SUIT CONSTRUCTION
Alpinestars fully-floating arm construction with stretchable knit fabric ensures minimal material resistance while driving
100% aramidic antistatic outer shell fabric for exceptional heat- and flame-resistance
Ribbed wrist and ankle cuffs for maximum comfort
Tall ribbed collar extends coverage of the neck, improving driver comfort and safety
Alpinestars exclusive shoulder epaulette construction provides for the extraction of the driver in the event of a crash
Premium YKK metal zipper with double slider
Thigh pockets for convenient, unobtrusive storage
"ALPINESTARS PROTECTS" slogan on the lower back of the lining, as used on Alpinestars F1 racing suits
Includes laundry bag for convenience and effective material fiber protection
Athletic/regular fit
Weight: 345 g/m2
ALPINESTARS GP PRO COMP V2 RACE SUIT SIZE CHART
Sabelt S.p.A.
Sabelt Universe TS-8 Driver Race Suit
from $1,299.00
Sabelt Universe TS-8 Driver Race Suit
The Sabelt Universe TS-8 racing suit is a high-performance garment designed for professional drivers who demand superior safety, comfort, and style on the track. Crafted in Italy, the suit is constructed using 100% Nomex® fabric, a material renowned for its outstanding fire-resistant properties. It meets the latest FIA 8856-2018 homologation standards, ensuring compliance with international safety regulations. Additionally, the Universe TS-8 is available with optional SFI 3.2A/5 – SFI 3.4 certification upon request, making it adaptable to various racing disciplines.
Engineered with a lightweight dual-layer design, the Universe TS-8 offers exceptional protection without sacrificing mobility. The fabric weighs approximately 310g/m², delivering the perfect balance between durability and breathability to keep drivers cool and focused under pressure. Its slim-fit profile is enhanced by ultrathin stitching and exclusive bi-stretch elastic panels that promote flexibility and a tailored look. The full-floating, pre-curved sleeves are carefully designed to eliminate bunching, ensuring unrestricted movement and maximum comfort during intense driving conditions.
The suit also features a range of functional details, including lateral pockets for convenient storage, lightweight cuffs, a lower neck collar to reduce restriction, and a durable YKK 3T zipper. Embroidered logos complete the refined appearance, adding a touch of professional style. Available in sizes ranging from 44 to 66, the Universe TS-8 caters to a wide variety of drivers, with color options including White, Red, Black, and Blue.
Combining cutting-edge materials with precision craftsmanship, the Sabelt Universe TS-8 racing suit is a testament to Sabelt’s legacy of excellence. It delivers the ultimate combination of safety, performance, and comfort, making it the ideal choice for drivers seeking an edge on the track.
FIA 8856-2018
Available with SFI 3.2A/5 – SFI 3.4 on special request.
Fabric weight: 310g/m²
Breathable and ergonomic material with incorporated bi-stretch panel
Stylish understated design
Full floating sleeves, anti-bunching pre-curved arms
Lateral pockets
100% Nomex®
Slim fit
Ultrathin stitching
Lightweight cuffs
YKK 3T Zipper
Lower neck collar
Embroidered logos
Sizes: 44-66
Layers: 2
Sparco
Sparco Superleggera Driver Race Suit (Discontinued Colorways)
$1,299.00
$1,699.00
Sparco Superleggera Race Suit
(DISCONTINUED COLORWAYS)
The Sparco Superleggera race suit is the lightest FIA 8856-2018 approved suit on the market. The Superleggera is not only lightweight, it's also one of the most comfortable race suits available at any price. It features a special four-way stretch panel that runs from each underarm down to the hip. These side stretch panels, combined with a generous rear stretch panel, give the driver the ultimate in flexibility and range-of-motion when in a seated position.
The Sparco Superleggera fire resistant auto race suit also has a breathable inner-thigh stretch panel, 360º floating arm gussets, and pre-curved arms and legs. The Sparco Superleggera auto race suit is both FIA and SFI homologated.
SPARCO SUPERLEGGERA RACE SUIT TECHNOLOGY
FIA 8856-2018 homologated
SFI 3.2A/5 approved
Lightest FIA suit on the market
Pre-curved arms and legs
Lightweight zipper and collar
Inner-thigh stretch panel
Four-way stretch panels strategically placed throughout
SKU 001142
Sparco
Sparco Superleggera Driver Race Suit
from $1,299.00
Sparco Superleggera Driver Race Suit
The Sparco Superleggera is the lightest FIA 8856-2018 homologated race suit on the market today. Beyond the Superleggera being extraordinarily lightweight, it is also one of the most comfortable race suits available at any price. The Sparco Superleggera features a special four-way stretch panel that runs from each underarm down to the hip. These side stretch panels, combined with a rear stretch panel, give you the ultimate in mobility and freedom of movement, especially in the seated position.
The Sparco Superleggera race suit also has a breathable inner thigh stretch panel, 360º floating arm gussets, and pre-curved arms and legs. It all adds up to unsurpassed comfort to go with the Superleggera's FIA and SFI approved safety.
SPARCO SUPERLEGGERA DRIVER RACE SUIT DETAILS
FIA 8856-2018 homologated
SFI 3.2A/5 approved
Lightest FIA suit on the market
Pre-curved arms and legs
Lightweight zipper and collar
Inner-thigh mesh stretch panel
Four-way mesh stretch panels on both sides and up the back
SKU: 001142
Sparco
Sparco Martini Racing Driver Suit (Blue)
$1,259.00
Sparco Martini Racing Blue Driver Suit
The Golden Age of Rally Racing Brought Back to Life!
In the golden years of rally racing, Sparco and Martini Racing contributed to the triumphs of the best racing drivers in the world. Now this partnership is renewed, and fans of the Martini Racing historical livery have access to beautiful re-creations of the original Sparco products. All of Sparco's Martini Racing reproductions have been updated with the newest Sparco safety technology and carry current FIA homologations.
Classic Racing Heritage Meets Modern Technology
The Sparco Martini Racing Replica Race Suit is made with all-new lightweight three-layer fabric. It offers superior fire protection, breathability, and comfort when compared to the original worn back in the day. The suit features iconic Martini Racing embroideries and patches to faithfully recreate the original look. The Martini Racing replica race suit is made from Sparco's latest generation fabrics, offering a soft, lightweight outer fabric and breathable inserts at the sides, plus a large lower-back stretch panel for maximum comfort.
The Sparco Martini Racing Replica Race Suit also features a light-weight zipper and collar, pre-curved arms, pockets, classic tone-on-tone box quilt stitching and Sparco's signature epaulettes. Available in sizes EU48 - EU66.
Sparco Martini Replica Race Suit Details:
Martini Racing embroideries
Lightweight three-layer fabric
Pre-curved arms
Lightweight zipper and collar
Breathable stretch panels
FIA 8858-2018 approved
Sparco
Sparco Gulf Racing Driver Suit
$1,259.00
Sparco Gulf Racing Driver Suit
The Golden Age of Endurance Racing Brought Back to Life!
In the golden years of endurance racing, Sparco and Gulf Racing contributed to the triumphs of the best racing drivers in the world. Now this partnership is renewed, and fans of the Gulf Racing historical livery have access to beautiful re-creations of the original Sparco products. All of Sparco's Gulf Racing reproductions have been updated with the newest Sparco safety technology and carry current FIA homologations.
Classic Racing Heritage Meets Modern Technology
The Sparco Gulf Racing Replica Race Suit is made with all-new lightweight three-layer fabric. It offers superior fire protection, breathability, and comfort when compared to the original worn back in the day. The suit features iconic Gulf Racing embroideries and patches to faithfully recreate the original look. The Gulf Racing replica race suit is made from Sparco's latest generation fabrics, offering a soft, lightweight outer fabric and breathable inserts at the sides, plus a large lower-back stretch panel for maximum comfort.
The Sparco Gulf Racing Replica Race Suit also features a light-weight zipper and collar, pre-curved arms, pockets, classic tone-on-tone box quilt stitching and Sparco's signature epaulettes. Available in sizes EU48 - EU66.
Sparco Gulf Replica Race Suit Details:
Gulf Racing embroideries
Lightweight three-layer fabric
Pre-curved arms
Lightweight zipper and collar
Breathable stretch panels
FIA 8856-2018 approved
Suit only (shoes, helmet, gloves, balaclava, house and car not included)
Sparco
Sparco Martini Racing Replica Suit (NEW)
$1,259.00
Sparco Martini Race Suit
In the golden years of rally racing, Sparco and Martini Racing contributed to the triumphs of the best drivers in the world. Now this partnership is renewed, and fans of the Martini Racing historical livery have access to beautiful re-creations of the original Sparco products. All reproductions have been updated with the newest Sparco technologies and carry current FIA homologations.
The Sparco Martini Racing replica race suit is made with all-new lightweight three-layer fabric. It offers superior fire protection, breathability and comfort when compared to the original. The suit features iconic Martini Racing embroideries and patches to faithfully recreate the original look. The Martini Racing replica suit is made from the latest generation fabrics which offer a soft lightweight outer fabric and breathable inserts at the sides and a large lower back stretch panel for maximum comfort. It also features a light-weight zipper and collar, pre-curved arms, pockets, classic tone-on-tone box quilt stitching and the Sparco signature epaulettes.
Available in sizes EU48-66.
FIA 8856-2018 approved.
SPARCO MARTINI REPLICA RACING SUIT TECHNOLOGY AND FEATURES
Martini Racing embroideries
Lightweight Three-layer Fabric
Pre-curved arms
Lightweight zipper and collar
Breathable stretch panels
FIA approved
SPARCO MARTINI REPLICA RACING SUIT SIZE CHART
Stilo
Stilo ST5.1 GT Offshore Composite Helmet SA2020
$1,200.00
Stilo ST5.1 GT Offshore Composite Helmet SA2020
Note: This helmet includes communications in the left port.
Rev Up Your Racing Game with the Stilo ST5.1 GT Offshore Composite Helmet SA2020!
Ready to level up your safety gear with a dash of style and a whole lot of functionality? The Stilo ST5.1 GT Offshore Composite Helmet SA2020 is calling your name (in a sexy radio voice, no less)!
Why the Stilo Offshore Helmet is the Unsung Hero of the Track:
A Return of the Legend: Remember the SA2015 version that made everyone's head turn? (No pun intended). This bad boy carries the same charisma. And with that tall eye-port and iconic side ports, you'll look and feel like the legend you are.
Safety First, Always: Made from a robust Kevlar Multi-Sandwich Fiber composite and autoclave magic, it's slightly heavier than its Carbon counterpart but lighter on the wallet. With the Snell SA2020 certification, you're all set for the grid.
Integrated Perfection: Whether you're planning to communicate with your team, breathe better with forced air, or just take a sip between the action – this helmet has got you covered! And guess what? No weird wires or distracting hoses. Everything’s as sleek as your ride.
Head and Neck BFF: Features an M6 nut (yes, it's a thing) integrated to make sure your head and neck restraint systems stay buddies throughout your race.
Specs that Make You Go "Whoa":
Noise attenuating earmuffs because who needs exterior noise when you're in the zone?
Choose from communications, forced air, hydration, or a get-out-quick eject option – or be a daredevil and pick them all.
New 2020 Snell Certification, because your noggin deserves the best.
Compatibility, baby: All existing Stilo ST5 shields and accessories play nice with the new ST5.1 SA2020 helmets.
Close your eyes and imagine this: The roar of the engine, the exhilarating speed, the wind against the visor, and the Stilo ST5.1 GT Offshore Composite Helmet snugly hugging your head, keeping you safe while you live your racing dream.
Ready to Unleash the Racer in You? Don't just dream about the finish line, race to it with the Stilo ST5.1 GT Offshore Composite Helmet SA2020. Click add to cart, and gear up for the thrill of a lifetime!
Stilo ST5 GT SA2020 Offshore Composite Helmet OrangeThe legend returns. The SA2020 Stilo ST5 GT helmet carries over everything that made the SA2015 version one of the most-loved helmets on the grid. Featuring the same tall eye-port and iconic side ports of the previous generation, the SA2020 ST5 GT from Stilo is worth getting excited about. This Offshore variant is already wired up for communications, and sports a bright orange shell, making it easy to spot.
Stilo ST5 GT SA2020 Offshore Composite Helmet Orange Details:
Manufacturer: StiloManufacturer part number: DA0702BF2TColor: OrangeM6 Nut Washer for HANS and other neck restraintsRating: SA2020Shield lock position: CenterReplaceable cheek pads: YesSizes: X-Small - XXX-Large (54 - 64 cm)
This is a slightly heavier version of the ST5 Carbon helmet. It is made from a Kevlar Multi-Sandwich Fiber composite formed in an autoclave. It carries the same Snell SA2020 certification as the Carbon helmet, but the different material adds the weight. This different material yields a slightly heavier helmet, but at a reduced cost. The Snell SA2020 rating satisfies almost all racing sanctioning bodies’ requirements for helmet certifications.Available with integrated electronics, top- or side-forced air supply, hydration, or any combination of the three, this helmet offers flexibility while maintaining a clean cabin. There are no wires or hoses hanging down below the helmet – everything integrates seamlessly with the shell of the helmet.Features an M6 nut integrated into the shell to interface with Head and Neck Restraint Systems.All Stilo shields are treated with an anti-fog treatment and they do require special care. The best result we have by far is the Stilo Visor cleaner. Liberally spray the outside of the visor with the cleaner, and wipe in a single swipe with a microfiber towel until clean and dry. If fingerprints or dirt remain, repeat as needed. A back and forth wiping motion will tend to leave lint from the rag on the visor, so the single-pass works best. Repeat if necessary, but usually, one pass works great.Do not use Windex or any glass cleaner containing ammonia, as this can harm the anti-scratch coating on the outside of the visor, and the anti-fog coating on the inside of the visor. Note: There are many things we can do to adjust your helmet fit. Obviously the best thing is to come into our show room and try on the helmets, but many times, that is just not possible. One of the great things about Stilo helmets is the adjustability with helmet padding. Crown padding, Cheek padding and different ear muff sizes are all available. Please contact a DiscoveryParts helmet expert at 888-748-7223.
Size Note: We have found that customers who typically wear a size 59 helmet are most comfortable in size 60, which uses the large shell. Please order accordingly.
STILO ST5 GT OFFSHORE COMPOSITE HELMET FEATURES:
Includes noise attenuating earmuffs to reduce exterior noise and maximize effectiveness of communications with your crew.
Select communications, forced air, hydration or eject options now, or add them later.
New 2020 Snell Certification offers increased protection for all head forms at higher g-forces and speeds
All Existing Stilo ST5 shields and other accessories work on new ST5.1 SA2020 helmets
An effective helmet is one that fits properly. Have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head, starting at a point about an inch above the eyebrows and around a point in the back of the head that results in the largest measurement, finally wrapping back around to the front. It's a good idea to take a few measurements and order your helmet based on the largest.
This helmet will ship to you with signature required for delivery.
STILO ST5 GT OFFSHORE COMPOSITE HELMETFREQUENTLY ASKED QUESTIONS (FAQ):
Remember that safety is paramount in auto racing, and choosing the right helmet and maintaining it properly is essential for your protection on the track. Always consult with the professionals at Discovery Parts and refer to the manufacturer's guidelines for specific questions about your racing helmet.
Why do I need a racing helmet?
Auto racing helmets are designed to protect drivers from head injuries and fire during high-speed races and crashes. They are a crucial safety component in motorsports.
How do I choose the right size Stilo ST5 GT Off-shore helmet? You should measure your head's circumference using a flexible tape measure, then refer to the manufacturer's sizing chart to select the appropriate size helmet. Please review our blog posting on how to properly fit your new auto racing helmet from Discovery Parts.
What safety standards should I look for in a racing helmet? Look for helmets that meet safety standards like Snell and FIA depending on your racing discipline. These standards ensure the helmet's safety and quality. DOT helmets are designed for street use and not for racing and track use.
What's the difference between full-face and open-face, and helmets? Full-face helmets provide the most protection with a complete face shield, while open-face helmets cover the top and sides of the head.
Can I use a motorcycle helmet for auto racing? No, motorcycle helmets do not provide the same level of protection as auto racing helmets, as they are designed for different purposes. It's recommended to use a helmet specifically designed for auto racing which includes fire protection in addition to impact protection.
How often should I replace my Stilo ST5 GT Off-shore racing helmet? Auto racing helmets should be replaced every 5-10 years, depending on the manufacturer's recommendations and usage. If the helmet is involved in a crash, it should be replaced immediately.
Are expensive racing helmets safer than budget ones? Safety standards dictate the minimum safety requirements, so even budget-friendly helmets can offer protection. However it’s important to consider how lower-priced helmets are meeting the required testing standards. More expensive helmets are lighter, smaller, are constructed of superior materials, and often come with additional features then less expensive helmets.
How do I maintain and clean my Stilo ST5 GT Off-shore racing helmet? Follow the manufacturer's instructions for cleaning and maintenance. You should clean the exterior, interior and shield with the Molecule Helmet Care Kit.
Do I need to wear a balaclava under my Stilo ST5 GT Off-shore racing helmet? Balaclavas are typically not required for Driver's Education events, however they make wearing a helmet much, much more comfortable. Balaclavas will provide fire protection (if fire rated), help keep your helmet lining clean and order free by absorbing the majority of sweat while using it, and additionally balaclavas make putting your helmet on and taking it off by protecting your ears and keeping from from folding over when you helmet is worn. Discovery Parts recommends balaclavas from Alpinestars, OMP, Sabelt, Sparco, and Stand21. If you are entering sanctioned auto racing events, balaclavas will be required for fire protection.
Is the SNELL SA Rating important? The Snell SA2020 certification is a safety standard established by the Snell Memorial Foundation for auto racing helmets. It sets the criteria and requirements that helmets must meet to be considered safe and suitable for use in motorsport events. Snell SA2020 certification is highly regarded in the motorsports industry and is often required or recommended by racing organizations and events. It signifies that a helmet has passed rigorous testing to provide maximum safety for drivers in various motorsport disciplines, including road racing, NASCAR, Formula 1, drag racing, and more. It's essential for drivers to check the specific safety standards required by the racing organizations they participate in to ensure compliance.
Is the FIA helmet certification important? Yes, FIA (Fédération Internationale de l'Automobile) certification is crucial for auto racing helmets, especially in the context of international motorsport events and many national and regional racing series in the USA. The FIA 8859-2015 standard is commonly associated with racing helmets used in various motorsport disciplines. Helmets certified to FIA 8859-2015 met the safety requirements set by the FIA and were widely accepted in many racing series
Which helmet certification is the most stringent and the hardest to meet? The FIA 8860-2018 certification is considered the most stringent and advanced helmet certifications available for auto racing helmets, and it is often associated with top-tier motorsport categories like Formula 1. It's important to note that the FIA 8860-2018 helmets offer a high level of protection and their use is mandatory in many racing series. Drivers should always check the regulations of the racing series they intend to participate in to ensure compliance with helmet certification standards.
Can I wear glasses with my Stilo ST5 GT Off-shore helmet? Most helmets have provisions for wearing glasses or goggles, but check the design to be sure. Most manufacturers feature helmet models with wider eye ports to better accommodate eye glasses.
Are carbon fiber helmets better? Carbon fiber helmets are lightweight and strong, a top choice for racers. But remember, certification matters most.
Can I use a used helmet for racing? It's best to buy a new helmet. Used helmets may have unseen damage or be out of date on safety standards.
Can I buy replacement parts for my Stilo ST5 GT Off-shore helmet, like visors or padding? Many manufacturers offer replacement parts, including visors and padding, to extend your helmet's lifespan.
How can I prevent helmet fogging during races? Anti-fog sprays and inserts are available to help keep your visor clear during races.
What's the importance of proper helmet ventilation? Proper ventilation helps keep you cool and comfortable during races, reducing the risk of heat exhaustion.
How do I store my Stilo ST5 GT Off-shore helmet between races? Keep it in a cool, dry place away from direct sunlight and chemicals in a bag designed to store your auto racing helmet, like the Discovery Parts Evo Helmet Bag.
Where can I buy a certified racing helmet? You should only buy from a professional authorized dealer who has sold thousands of helmets. You can find all the best brands at Discovery Parts online at www.discoveryparts.com or visit our retail store at Atlanta Motorsports park or at one of the hundreds of race and track day events we attend and support.
Remember, safety should always come first in auto racing. Choose a certified helmet that meets the necessary standards to protect yourself on the track.
We take immense pride in offering a wide selection of Stilo auto racing helmets, designed to meet the demands of professional racers and motorsports enthusiasts alike. Stilo has been at the forefront of helmet innovation and safety for decades, earning a reputation as a top-tier brand in the racing world.
Key Features of Stilo Racing Helmets:
Unparalleled Safety: Stilo racing helmets are engineered to the highest safety standards, including certifications like Snell and DOT approval, ensuring your head is well-protected in high-speed racing conditions.
Premium Materials: Crafted with precision, Stilo helmets feature carbon fiber construction, making them lightweight yet incredibly strong for maximum protection.
Comfort and Fit: Stilo's commitment to comfort is evident in the design of their helmets. They offer a range of sizes, and many models have customizable padding to ensure a snug fit.
Aerodynamic Design: Stilo helmets are designed with aerodynamics in mind, reducing wind resistance and enhancing performance on the track.
Frequently Asked Questions About Stilo Helmets:
Where are Stilo helmets made? Stilo helmets are proudly manufactured in Italy, maintaining the highest quality standards.
Is Stilo a good helmet brand? Yes, Stilo is renowned for its commitment to safety, innovation, and performance, making it a trusted choice among professional racers and enthusiasts.
Are Stilo helmets Snell approved? Yes, many Stilo helmets are Snell approved, meeting rigorous safety standards.
Are Stilo helmets FIA approved? Absolutely, several Stilo helmets are FIA 8860-2018 certified, ensuring they meet the most stringent safety requirements.
Do Stilo helmets run small? Stilo offers a variety of sizes and often provides sizing charts to help you choose the right fit. It's important to measure your head and refer to their guidelines for a proper fit.
For racers who demand the best in safety and performance, Stilo auto racing helmets are the ultimate choice. Explore our extensive collection to find the perfect helmet for your racing needs.
Stilo Racing Helmets: Stilo Racing Helmets are renowned for their exceptional quality and safety features. With a wide range of models to choose from, you can find the perfect Stilo Racing Helmet to suit your racing needs.
Stilo Racing Helmet: Each Stilo Racing Helmet is a product of meticulous craftsmanship and cutting-edge technology. When you wear a Stilo Racing Helmet, you're choosing a helmet that prioritizes your safety and performance on the track.
Stilo Race Helmets: Stilo Race Helmets come in various styles and designs to cater to different types of motorsports. Whether you're into karting, open-wheel racing, or stock car racing, Stilo has race helmets tailored for your specific discipline.
Stilo Race Helmet: Your Stilo Race Helmet is more than just protective gear; it's a crucial part of your racing ensemble. The aerodynamic design of a Stilo Race Helmet helps reduce wind resistance, giving you a competitive edge.
Stilo Helmet: A Stilo Helmet is a symbol of trust in motorsports. Professional racers and amateurs alike rely on the comfort, safety, and durability that Bell Helmets provide during intense racing conditions.
Stilo Helmets: Stilo Helmets have a rich history of innovation and excellence. The extensive range of Stilo Helmets ensures that there's a model suitable for every racer, whether you're a seasoned pro or just starting in the sport.
Stilo Carbon Fiber Helmet: Stilo Carbon Fiber Helmets combine the lightweight properties of carbon fiber with advanced safety features. These helmets are a top choice for racers seeking the ultimate in protection without sacrificing comfort.
Race Car Helmet: A race car helmet is a fundamental piece of safety gear for any racer. Stilo's race car helmets are engineered to meet the rigorous demands of motorsports, ensuring you stay safe on the track.
Racing Helmet: Your racing helmet is your shield against potential accidents. Stilo Racing Helmets are designed to offer superior impact protection while maintaining optimal visibility and ventilation.
Racing Helmets: Racing helmets are a racer's best friend. Stilo Racing Helmets, with their reputation for quality and safety, are the go-to choice for many professionals and enthusiasts in the racing community.
Stilo Racing: Stilo Racing is synonymous with excellence in the motorsports industry. Their commitment to research, development, and testing has solidified their position as a leader in racing helmet technology.
Auto Racing Helmet: When it comes to auto racing, your helmet is your first line of defense. Stilo Auto Racing Helmets are engineered to withstand the rigors of high-speed racing, ensuring your head is protected.
Auto Racing Helmets: Auto racing helmets from Stilo are designed to provide optimal head protection while maintaining lightweight and aerodynamic qualities, allowing you to perform at your best.
Bell Racing Helmets
Bell GT6 RD-4C Titanium S Helmet FIA8859-2024/SA2025
$1,199.95
Bell GT6 RD-4C Titanium S Helmet FIA8859-2024 / SA2025
The Bell GT6 RD-4C Titanium S is a premium racing helmet engineered for maximum safety, clarity, and comfort. Built with a lightweight carbon composite shell and dual certification to FIA8859-2024 and Snell SA2025 standards, it’s designed for drivers competing at the highest levels of motorsport.
Elite performance with uncompromising protection
Dual FIA and Snell certification
Approved to both FIA8859-2024 and Snell SA2025, the GT6 RD-4C Titanium S meets the strictest global motorsport standards for professional competition.
Lightweight carbon composite shell
The advanced RD-4C carbon composite construction provides outstanding impact resistance while keeping the helmet light, reducing strain and fatigue during endurance sessions.
Enhanced ventilation
An optimized airflow system channels fresh air through upper and chin intake ports with rear exhausts, ensuring drivers stay cool and focused behind the wheel.
Wide eyeport and SE06 anti-fog visor
With its generous eyeport and standard SE06 double screen anti-fog visor, the GT6 RD-4C Titanium S delivers exceptional visibility and reliable clarity in every condition.
Bell GT6 RD-4C Titanium S Helmet FAQs:
What makes the RD-4C Titanium S different from other GT6 models? The RD-4C Titanium S features a specialized carbon composite shell designed for strength and reduced weight, along with premium fit and finish for pro-level performance.
Is this helmet approved for international racing? Yes, with FIA8859-2024 and Snell SA2025 certifications, it is legal for use in most professional racing series worldwide.
Does the helmet come HANS-ready? Yes, the GT6 RD-4C Titanium S is HANS-ready with pre-installed anchor points for all major head and neck restraint systems.
What visor is included with the helmet? It comes with an SE06 double screen anti-fog visor for maximum clarity, even in challenging conditions.
The Bell GT6 RD-4C Titanium S is the ultimate racing helmet for drivers seeking advanced protection, lightweight design, and professional-grade performance on track.
Bell Racing Helmets
Bell GT6 RD 4C/EC Composite Helmet FIA8859-2024/SA2025
$1,199.95
Bell Racing GT6 RD 4C/EC Auto Racing Helmet
IMSA Comms, Hydration, and ZeroNoise® in a Race-Ready Shell
Built for serious endurance and GT drivers, the Bell Racing GT6 RD 4C/EC Helmet brings full comms and hydration integration into a track-ready shell without compromise. With its titanium finish, aggressive HP6-derived design, and wide eye port for visibility in tight cockpits, this is the helmet for those who treat every lap like a qualifying session. The GT6 RD 4C/EC is ready for IMSA communication and hydration systems right out of the box—because seconds count, even off the throttle.
4C: Carbon Composite 4 Layer Construction
On Bell helmets, “4C” stands for “Carbon Composite 4 Layer Construction.” It refers to the shell technology Bell uses: a 4-layer carbon composite laminate. This blend typically combines carbon fiber with other advanced fibers (like Kevlar® or fiberglass) in multiple layers.
The purpose is to deliver a shell that is lighter than fiberglass alone, but more affordable and versatile than Bell’s top-end full carbon HP series shells (like HP7 or HP77 which use pure carbon/advanced aerospace layups). In the case of this Carbon-4C/EC model, the helmet is a Carbon Composite 4-layer shell with EC (electronic comms) kit integration.
Features:
Integrated IMSA Radio & Hydration System: Comes pre-installed with electronics and tubing for plug-and-play connection to your team’s radio and drink system.
4C/EC Carbon-Glass Composite Shell: Lightweight and high-strength, built from premium carbon-glass for optimal energy absorption and all-day wearability in long stints.
ZeroNoise® Advanced Electronics: Equipped with high-power speakers, a noise-canceling microphone, and superior sound insulation for crisp in-car communication even in loud environments.
Wide Eyeport: Offers exceptional lateral and vertical visibility, ideal for closed-cockpit racing where every degree of vision matters.
Track-Proven Ventilation: Strategically placed intake ports can be connected to cooling systems for maximum airflow in hot race conditions.
Standards: Dual certified to FIA8859-2024 and Snell SA2025 for maximum track-day and competition eligibility.
Bell Racing GT6 RD Carbon 4C/EC Helmet FAQs:
What’s the difference between the GT6 and the GT6 RD? The GT6 RD includes factory-installed IMSA radio comms and hydration ports, while the standard GT6 does not.
Is this compatible with ear buds or over-ear speakers? Yes, the 4C version supports both ear cups and ear buds depending on your personal or team setup. Uses IMSA connections.
What is ZeroNoise® and why does it matter? ZeroNoise® is Bell's advanced audio platform, engineered for crystal-clear in-car communication with minimal distortion and maximum driver focus.
Can I use this helmet for endurance racing? Absolutely. With comms, hydration, and a lightweight carbon-glass shell, it's made for long hours in the car at high intensity.
The Bell GT6 RD 4C is the pro’s choice when comfort, comms, and clarity matter most. From sprint races to 24-hour stints, this helmet brings together titanium-level fit, cutting-edge audio, and pure performance.
Bell Racing Helmets
Bell M.8 Carbon Fiber Helmet FIA8859-2024/SA2025
$1,199.95
Bell M.8 Carbon Fiber Helmet FIA8859-2024/SA2025
This is a pre-order, shipping after Q3 2025.
The Bell M.8 Carbon Fiber FIA8859-2024/SA2025 helmet is purpose-built for comfort while retaining the classic Bell M design that racers trust. With its oversized eye port and adjustable forehead ventilation, this helmet is ideal for drivers who need to wear sunglasses or prescription glasses while maintaining peak visibility and comfort on track.
Premium Carbon Construction, Modern Safety Standards
Handcrafted from lightweight carbon fiber, the Bell M.8 Carbon meets the newest FIA8859-2024 and Snell SA2025 standards. Its balance of protection, fit, and ventilation makes it a go-to choice for racers in endurance, open-track, and competitive series. Whether you’re logging hours at an HPDE or battling wheel-to-wheel, the M.8 delivers race-day confidence without compromise.
Features
• FIA8859-2024 and Snell SA2025 approved• Lightweight carbon fiber shell (Size M = 2.9 lbs / 1.3 kg)• High-pressure molded shell for maximum strength• Multi-piece, multi-density liner for superior energy absorption• Direct-flow chin vents and forehead air intakes for customizable cooling• Integrated channels for drink tube and radio system use• Black Comfort-Plus FR interior for moisture-wicking comfort• Large eye port optimized for eyeglass wearers• Hollow synthetic rubber gasket keeps out dust, dirt, and water• Includes clear SRV-8 3mm shield with SRV-1 pivot system• M6 threaded inserts for HANS® anchors (sold separately)• Delivered with visor hardware, hex wrench, and helmet bag
Bell M.8 Carbon Fiber Helmet FAQs:
Is the Bell M.8 Carbon certified for racing? Yes, it is homologated to FIA8859-2024 and Snell SA2025 standards, making it legal for most major racing organizations worldwide.
Can I wear glasses with the Bell M.8 Carbon? Absolutely. The oversized eye port is specifically designed for drivers who need sunglasses or prescription eyewear.
What comes in the box? Each helmet includes a clear SRV-8 shield, visor strip, hardware kit with hex wrench, and a Bell helmet bag.
Is it compatible with HANS devices? Yes, the helmet has factory-installed M6 threaded inserts for HANS posts (sold separately).
Step into the cockpit with confidence. The Bell M.8 Carbon FIA8859-2024/SA2025 delivers lightweight strength, incredible comfort, and proven race-ready safety. Order yours today and experience the difference a top-tier Bell helmet makes on track.
FluidLogic
FluidLogic Coaxial System (Forced Air)
$1,199.95
FluidLogic Coaxial System (Forced Air)
Forced-Air applications use our Maglock® Coaxial connector to provide air and water quickly and easily.
The Pod & Coaxial kit is designed for users that have a pre-existing forced air setup for their vehicle and helmet. The Pod is the heart and brain of the Fluidlogic™ system that also connects to your IOS device via Bluetooth to allow the user to fully customize their hydration profile. Included with the Pod is the Microbutton used to visually communicate with the user and command the Fluidlogic™ system with the press of a button. All the necessary mounting, wiring and plumbing hardware is included to turn the existing fluid source into a smart hydration system with no helmet drilling or modifications.
The Fluidlogic™ Pod paired with the Coaxial system allows forced air users to connect both air and water within the same Maglock® magnetic connection. The Coaxial kit includes everything needed to completely set up one helmet and one seat in the vehicle.
Alpinestars
Alpinestars GP Tech v3 Driver Race Suit
$1,199.95
$1,799.95
Alpinestars GP Tech v3 Driver Race Suit
The GP Tech v3 race suit features an outer shell twill material developed exclusively for Alpinestars which is combined with an innovative aramidic-based knit lining for optimum levels of comfort, fire protection, light weight and comfort. Thanks to the introduction of the aramidic base lining with an open weave structure, this race suit is superbly breathable, and these levels are further enhanced by the breathable panels on the side. The GP Tech v3 race suit also incorporates lightweight stretchable panels at the center back, lower back, elbow, crotch and knee zone to provide great flexibility both in and out of the car.
ALPINESTARS GP TECH V3 RACE SUIT PROTECTION
Certified to the FIA 8856-2018 homologation standard
Super-lightweight and breathable multi-layer suit incorporating thin stretchable panels, for maximum comfort and effective regulation of body temperature
Nomex® anti-static outer shell fabric for exceptional heat and flame-resistant proprieties
Sold with laundry bag for convenience and effective material fiber protection
ALPINESTARS GP TECH V3 RACE SUIT DETAILS
Strategically positioned Formula One derived stretch panels at center back and spine, lower back, elbows, crotch and knees enhance flexibility
Alpinestars fully-floating arm construction with stretchable knit fabric ensures minimal material resistance while driving
Soft and thin wrist and ankle cuffs for maximum comfort and reduced weight
Soft collar with knit fabric and secure hook and loop closure for improved comfort
Alpinestars exclusive shoulder epaulette construction provides an effective feature for the extraction of the driver in the event of a crash
Printed logos help maintain suit’s material integrity and reduce weight
Premium YKK thin lightweight zipper with double slider
Thigh pockets for convenient, unobtrusive storage
Athletic fit
Weight: 325g/m2
