Ultimate Search - Do not delete

C3 Carbon Porsche GT2 RS Wing End Plates FITS: 991.2 Porsche GT2 RS C3 Carbon GT2 RS 100% carbon fiber rear-wing end plates offer the uncompromising look, fitment, and finish to match the GT2 RS carbon rear wing perfectly. C3 uses 3D laser scanning to make an ultra-precise mold CNC-machined into an aluminum billet for these RS end plates. The result of countless hours of refinement, the fitment is what you expect from OEM Porsche parts. The look and finish are simply glorious. These really are the pieces Porsche should have put on the GT2 RS in the first place. The 2x2 carbon weave matches that of the rear wing to perfection, lining up seamlessly with the wing's weave. Available in high-gloss or matte/satin clear automotive urethane top coat, or satin black top coat. FEATURES: Autoclaved pre-preg dry carbon fiber 2x2 weave matched to Porsche's factory carbon wing Available in gloss or matte/satin clear, or satin black top coat OEM-perfect fit Installs in minutes without any modification using original hardware Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Installation Instructions Here Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

Discovery Parts is an authorized dealer for Girodisc products. As one of the largest stocking dealers in the country, we ship most Girodisc products the same or next business day to ensure we meet your delivery deadline. The Girodisc system is a direct replacement for the OE disc, no modifications are necessary. The disc will bolt directly to the car and work with OE calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Girodisc front rotors are approx. 13.0 lbs vs. 15.3 lbs for the stock units, this reduction in rotational and unsprung weight allows for quicker acceleration and suspension response. The central hat section of the Girodisc rotor is made from strictly USA-sourced 6061-T6 aircraft specification aluminum. The disc is made from Girodisc's own proprietary cast iron, poured in the USA and machined from start to finish in house at Girodisc. The rotor utilizes a curved-vane design, developed in racing to act as a centrifugal pump forcing cool air through the disc. The disc and hat have a floating mount system, which utilizes 12 high-strength alloy steel drive pins, manufactured in the US by Girodisc and cadmium plated for long-lasting corrosion resistance. These pins take the loads from braking while maintaining the axial and radial float between the hat and disc. They are secured by class 12.9 cap screws and hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise springs on the disc side, allowing the iron disc to expand as it heats up while eliminating the rattle and noise commonly associated with floating rotors. This float also allows the rotor to self center between the brake pads. Once the Girodisc system is in place, you simply replace the cast iron discs when needed. This reduces cost over time by allowing you to re-use the aluminum central hats. Sold/priced per pair

FITMENT (FRONT): Audi 8S TTRS (2014-Present) Discovery Parts is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most Girodisc systems the same or next business day to ensure we meet your delivery deadline. The Girodisc system is a direct replacement for the OE disc. No modifications are necessary. The disc will bolt directly to the car and work with OE calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Girodisc front rotors are approx 22.0lbs vs. 27.4lbs for the stock units. This reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.The central hat section of our rotor is made from strictly U.S. sourced 6061-T6 aircraft specification aluminum. The disc is made from our own proprietary cast iron, poured in the USA and machined from start to finish in house at Girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, manufactured by Girodisc in the USA to our own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. The pins are secured by grade 12 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads.Once the Girodisc system is in place, simply replace the cast iron rotor when needed. Sold/priced per pair. When used with Pagid 8081 pads and high-temp racing brake fluid, you have a truly amazing, race-proven solution to the fragile, ultra-expensive carbon-ceramic rotors on your McLaren.

GT2 RS Style Wing End Plates for the GT3 RS FITS: 991.1 & 991.2 Porsche GT3 RS C3 Carbon has created a GT2-Style, 100% dry carbon fiber rear-wing end plates that bolt directly to the factory GT3 RS wing! The OEM GT2 RS end plates use a completely different attachment system (adhesive) than the OEM GT3 RS end plates (bolt-on). But we love the look of the GT2 RS wing ends. So we married the two, giving our customers the look of the GT2 RS on their GT3 RS! The C3 Carbon end plates precisely match the uncompromising look, fitment, and finish of the factory Porsche carbon rear wing. They attach in exactly the same way as the OEM GT3RS end plates; no drilling, modifying, etc. required. Just bolt them up and go. C3 starts with 3D laser scanning to make an ultra-precise, CNC-machined aluminum billet mould for these RS end plates. The result of countless hours of refinement, the fitment is what you expect from OEM Porsche parts. The look and finish are truly amazing! The 2x2 carbon weave matches that of the rear wing to perfection, lining up seamlessly with the wing's weave. Available in either high-gloss or matte/satin automotive urethane clear coat, or satin black automotive coating. FEATURES: Autoclaved pre-preg dry carbon fiber 2x2 weave matched to Porsche's factory carbon wing Gloss clear, satin clear, or satin black finish available OEM-perfect fit Installs in minutes without any modification using original hardware Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Installation Instructions Here Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

Call us any time at 888-748-7223 for Discovery Parts-Exclusive Forgeline pricing you won't find anywhere else! Discovery Parts offers FREE SHIPPING on all Forgeline Wheel Orders! FORGELINE DE3P PREMIER REVERSE FORGED WHEELS Contact a wheel specialist today at 888-748-7223 to discuss the details of your custom Forgeline wheel build. We can guide you through sizing, offsets, finishes, and other details to make sure your Forgelines are perfectly suited to your needs! The DE3P incorporates a classic eight spoke mesh design with more than half of the assembly hardware hidden and the rest visible. Spokes that reach all the way to the rim add scale and dimension to this design. Each DE3P wheel is built with forged 6061-T6 aluminum centers, 6061-T6 spun rim halves, and stainless steel aircraft-grade ARP fasteners. Finish options include a powder coated or polished center with a polished, powder coated, or chromed outer lip. The DE3P is available in sizes ranging from 18x7.5 to 20x16. And since each wheel is built to order, Forgeline offers special features like custom offsets and a large choice of finish combinations. Call our Forgeline Wheel experts at 888-748-7223 and we'll get the perfect build, colors, and finishes for your car at the best price you'll find anywhere! FEATURES: Three-Piece Premier Series Wheel Deep Flat-Lip Design (optional stepped-lip also available) Combination of Hidden and Exposed ARP Fasteners Delivers a Clean and Modern Look Generous Brake Clearance Forged 6061-T6 Aluminum Heat-Treated Rim Shells Includes Standard Aluminum Center Cap Customizable Fitment and Finish Options Legendary Forgeline Quality

Stand21 Porsche Motorsports ST221 Air-S Driver Race Suit This special-order race suit may take two to three weeks to ship. Returns are not accepted for special-order suits. Please call us with sizing questions. Officially-licensed Porsche Motorsports safety gear is now available at Discovery Parts! The Stand21 ST221 Air-S race suit gives you exceptional comfort and extremely lightweight performance in a three-layer race suit. This racing fire suit is specially constructed for the Porsche Motorsports enthusiast in everyone! STAND21 PORSCHE MOTORSPORT ST221 AIR-S RACE SUIT DETAILS FIA 8856-2000 homologated. SFI 3.2A/5 homologated 1 Three-layer construction Lumbar stretch panel for comfort in the seated racing position Tailored pockets Soft and comfortable collar Fully-floating pre-formed sleeves for comfort in the driving position 1 Note: an SFI patch is not standard on this race suit. One can be added for a nominal fee, please call us at 888-748-7223.

Carbon Fiber Wing End Plates For Porsche GT3 RS FITS: 991.1 and 991.2 Porsche GT3 RS C3 Carbon 100% carbon fiber rear-wing end plates with the look, fitment, and finish that matches your GT3 RS carbon rear wing perfectly. C3 uses 3D laser scanning to make an ultra-precise mold CNC-machined into an aluminum billet for these RS end plates. The result of countless hours of refinement, the fitment is what you expect from OEM Porsche parts. There's no modification, drilling, etc. needed -- the C3 Carbon parts are ready to bolt on. The look, however, is pure carbon fiber! These really are the pieces Porsche should have put on the GT3 RS in the first place. The 2x2 carbon weave matches that of the rear wing to perfection, lining up seamlessly with the wing's weave. The high-gloss automotive urethane top coat is hand-applied and polished to a smooth mirror finish. FEATURES: Autoclaved pre-preg dry carbon fiber 2x2 weave matched to Porsche's factory carbon wing Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Easy bolt-on, no modifications required Installs in minutes without any modification using original hardware Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Installation Instructions Here Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

A2-130 Girodisc 2pc Rear Brake Rotors (Audi B8 S4/S5) Discovery Parts is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. The Girodisc system is a direct replacement for the OE disc, no modifications are necessary. The disc will bolt directly to the car and work with OE calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Girodisc front rotors are approx 13.9lbs vs. 17.1lbs for the stock units. This reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.The central hat section of our rotor is made from strictly U.S. sourced 6061-T6 aircraft specification aluminum. The disc is made from our own proprietary cast iron, poured in the USA and machined from start to finish in house at Girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, manufactured by Girodisc in the USA to our own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. The pins are secured by class 12.9 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads.Once the Girodisc system is in place, simply replace the cast iron rotor when needed. Sold/Priced per pair.

Belt Mounted Holster For Quick Access In Pits Or Paddock Using the same Zero FK fire suppression fluid (replaces 3M Novec 1230) technology found in Lifeline's Zero 360 hard-mounted racing fire systems, the Lifeline 360 Zero FK 1 Kg Belt Mounted Extinguisher is ideal for pit crew and other personnel in a position to fight small fires quickly and safely. The specially-designed holster gives you fast, easy access while ensuring the Lifeline Zero 360 portable extinguisher remains securely in place as people move around a busy racing pit. All Lifeline hand held fire extinguishers are supplied complete with a bracket and two quick-release straps for easy access. This Lifeline extinguisher is professionally refillable and should be serviced every two years. Comes in 1.0 kilogram bottle.

The Perfect Affordable Extinguisher For HPDE Cars For HPDE participants, there simply is no better affordable fire extinguisher to protect your valuable sports car if things go sideways at the racetrack. AFFF (Aqueous Film Forming Foam) fire extinguishers are suitable for use on Class A (wood, paper, material & cloth) & Class B (flammable liquids: gasoline, spirits, diesel, etc.) fires. This Dual Class A & B rating makes the Lifeline Foam (AFFF) Fire Extinguishers far superior for use in your HPDE car and trailer vs. the typical big-box store extinguisher. These are NOT approved or intended for use as motorsports-sanctioned fire suppression systems.  The Lifeline AFFF Handheld fire extinguisher is ideal for your road car, trailer, or workshop. While this uses the same extinguishing agent used in the Lifeline Zero 2000 systems, this extinguisher is not approved (rated) for use in motorsport. Lifeline AFFF (Aqueous Film Forming Foam) is a non-toxic, ozone friendly fire suppressant that offers the competitor the same level of protection as the pros use. The vertically stored steel bottle is rugged and has an easy to read pressure gauge mounted near the handle.   All Lifeline hand held fire extinguishers are supplied complete with a bracket and two quick release straps for easy access.  Extinguishers are refillable and should be serviced every two years. Choose from 1.0, 1.75, or 2.4 liter bottles.  Ground Shipping Only. Pressurized bottles cannot be shipped via air.  

AiM MXG 1.3 Strada Color TFT Dash The Full-Size Color TFT Dash For Road Use MXG 1.3 Strada ("street" in Italian) is a beautifully-designed, feature-rich color digital dash display. It is basically the MXG 1.3 without the data-logging function. The MXG 1.3 Strada features a wide 7" High Contrast TFT color screen with great visual impact, configurable to show lap times, RPM, and a huge range of info coming from your Engine Control Unit, analog/digital inputs, pre-defined math channels and an optional GPS08 Module. Programmable multicolor shift and alarm LEDs round out an incredibly powerful package. The MXG 1.3 Strada displays your RPM, selected gear, speed, plus all the data you choose (water temp, oil pressure, trans temp, lap times and much more) in either pre-configured or user-customized pages. Swapping between pages is as easy as pushing buttons. Plus the MXG 1.3 Strada puts a huge amount of control over your car's systems at your fingertips. And you can choose the version with "Street Icon" LEDs in place of the standard LEDs! INPUT & OUTPUT FLEXIBILITY Eight fully configurable analog input channels can sample, log, and display a wide range of temperatures, pressures, and potentiometers (throttle position, steering wheel position, etc). Available only in a CAN/RS232 version for the maximum level of customization and data access. The CAN input allows you to further expand the dash by adding an almost limitless number of AiM CAN Data Hubs (Part No. MC-329, sold separately). These hubs let you connect other inputs such as Lambda Controller (O2), SmartyCam, or even channel expansion hubs, without using any analog channels. A separate CAN output allows you to send messages to your car's existing CAN network, adding to the vehicle system control possibilities! ALARMS & SHIFT LIGHTS The ten multicolored RGB shift lights can be customized to define the max RPM for each single gear. The same flexibility applies to the configurable RGB alarm LEDs: you can configure them to turn on/off depending on analog or digital inputs, ECU values, expansion values, math channels or GPS information (with the optional GPS08). You choose conditions, colors, and select a solid alarm or flashing one (including flash frequency). It's also possible to configure an accompanying text message. DIGITAL OUTPUT The MXG 1.3 Strada features a low-side (switch to ground) digital output that can be configured to activate/deactivate external systems (switch on/off additional lights, cooling fan relays, fluid circulation pumps, etc.) based on those inputs. RACE STUDIO 3 MXG 1.3 Strada is configured using your PC and Race Studio 3. You can create, customize, delete, import and export configurations with all channels, ECU drivers, Math Channels, Display Pages, Digital Output, Alarms, Shift Lights and all the expansions you need. AIM SPORTS MXG 1.3 STRADA DASH TECHNICAL SPECS 9.3" x 5.0" x 1.0" Anodized Aluminum housing Large 7.0" high-contrast color TFT display 800x480 pixel screen resolution Weight 2.1 lbs (950g) Waterproof IP65 AIM SPORTS MXG 1.3 STRADA DASH KIT INCLUDES MXG 1.3 Strada digital dash USB cable 14-pin standard wiring 23-pin connector + contacts Installation CD with Race Studio 3 software All sensors and modules sold separately.

Call us any time at 888-748-7223 for Discovery Parts-Exclusive Forgeline pricing you won't find anywhere else! Discovery Parts offers FREE SHIPPING on all Forgeline Wheel Orders! Forgeline Grip Equipped Dropkick Wheels (3-piece) Contact a wheel specialist today at 888-748-7223 to discuss the details of your custom Forgeline wheel build. We can guide you through sizing, offsets, finishes, and other details to make sure your Forgelines are perfectly suited to your needs! The Grip Equipped Dropkick is based upon vintage race wheels with core styling that includes classic undertones massaged with modern surface transitions and details to create a fresh look that stands out from other multi-spoke concave wheels. Plus, the available finishes are sure to give you just the right look for your vehicle!The Grip Equipped Dropkick is a custom made-to-order three-piece wheel that is produced from forged 6061-T6 aluminum centers and heat-treated rim-shells assembled with hidden stainless-steel ARP fasteners and Heli-Coil inserts. And just like any Forgeline wheel, the Dropkick is fully customizable in fitment and finish. Muscular Concave Design Multi-Spoke Center with Classic Inspired Styling 3-Piece Construction Available in 18", 19", and 20" Flat Reverse-Lip Design Also available with a stepped lip in 19" and 20" diameters only Hidden Stainless ARP Fasteners Heli-Coil Inserts Generous Brake Clearance Forged 6061-T6 Aluminum Heat-Treated Rim Shells Includes Standard Aluminum Center Cap Will Accommodate OE TPMS and Lug Nuts Customizable Fitment and Finish Options Legendary Forgeline Quality

Call us any time at 888-748-7223 for Discovery Parts-Exclusive Forgeline pricing you won't find anywhere else! Discovery Parts offers FREE SHIPPING on all Forgeline Wheel Orders! Forgeline LS3C Wheels (3-piece) Contact a wheel specialist today at 888-748-7223 to discuss the details of your custom Forgeline wheel build. We can guide you through sizing, offsets, finishes, and other details to make sure your Forgelines are perfectly suited to your needs! The LS3C Concave combines the classic mesh styling from our Heritage Series LS3 wheel with a concave center profile to create a wheel with elegant looks, timeless character, and plenty of room for caliper clearance and extreme brake fitment. Like all Forgeline Concave Series wheels, the LS3C locates the pad inboard of the outer rim to deliver depth and scale within the wheel center for a modern muscular look. Available in both deep concave profiles (for the most striking appearance) and shallow concave profiles (to create a staggered look or to accommodate narrow widths or higher-offset applications), these 3-piece wheels are assembled with hidden American-made stainless-steel ARP fasteners and Heli-Coil inserts. The LS3C is a custom made-to-order three-piece wheel that is produced from forged 6061-T6 aluminum centers with heat-treated rim-shells. And just like any Forgeline wheel, the LS3C is fully customizable in fitment and finish, including center lock applications. Elegant Concave Profile Available in 18", 19", 20", and 22" Both Deep and Shallow Concave Profiles Available Tight Mesh Design Adapted from the Forgeline LS of the 1990s 3-Piece Modular Construction Hidden Stainless ARP Fasteners Heli-Coil Inserts Forged 6061-T6 Aluminum Center Heat-Treated Rim Shells Includes Standard Aluminum Center Cap Will Accommodate OE TPMS and Lug Nuts Customizable Fitment and Finish Options Legendary Forgeline Quality

Call us any time at 888-748-7223 for Discovery Parts-Exclusive Forgeline pricing you won't find anywhere else! Discovery Parts offers FREE SHIPPING on all Forgeline Wheel Orders! Forgeline FF3C Open Lug Wheels (3-piece) Contact a wheel specialist today at 888-748-7223 to discuss the details of your custom Forgeline wheel build. We can guide you through sizing, offsets, finishes, and other details to make sure your Forgelines are perfectly suited to your needs! The FF3C Open Lug combines the classic 5-spoke styling and the sexy concave center profile from the FF3C Concave wheel with a motorsport-derived open-lug hub center to create a wheel with stunning good looks, aggressive character, and plenty of room for caliper clearance and extreme brake fitment. Like all Forgeline Concave Series wheels, the FF3C Open Lug locates the pad inboard of the outer rim to deliver depth and scale within the wheel center for a modern muscular look. But the FF3C Open Lug also has significant material machined from the center lug area for additional weight reduction, improved access to the lug nuts, and an extra-aggressive look. It also includes a unique specially-engineered tall center cap (with Forgeline Motorsport engraving) to cover the hub spindle and protect it from the elements. Available in both deep concave profiles (for the most striking appearance) and shallow concave profiles (to create a staggered look or to accommodate narrow widths or higher-offset applications), these 3-piece wheels are assembled with hidden American-made stainless-steel ARP fasteners and Heli-Coil inserts. The FF3C Open Lug is a custom made-to-order three-piece wheel that is produced from forged 6061-T6 aluminum centers with heat-treated rim-shells. And just like any Forgeline wheel, the FF3C Open Lug is fully customizable in fitment and finish, including center lock applications. Muscular Concave Design Available in 18", 19", 20", 21" and 22" Both Deep and Shallow Concave Profiles Available Classic 5-Spoke Design Open Lug Center Provides Improved Lug Nut Access and Weight Reduction 3-Piece Modular Construction Reverse Flat-Lip Design Also available with a stepped-lip in 19", 20", 21", and 22" diameters Hidden Stainless ARP Fasteners Heli-Coil Inserts Forged 6061-T6 Aluminum Center Heat-Treated Rim Shells Includes Open-Lug Style Aluminum Center Cap Will Accommodate OE TPMS and Lug Nuts Customizable Fitment and Finish Options Legendary Forgeline Quality

Call us any time at 888-748-7223 for Discovery Parts-Exclusive Forgeline pricing you won't find anywhere else! Discovery Parts offers FREE SHIPPING on all Forgeline Wheel Orders! Forgeline FF3C Wheels (3-piece) Contact a wheel specialist today at 888-748-7223 to discuss the details of your custom Forgeline wheel build. We can guide you through sizing, offsets, finishes, and other details to make sure your Forgelines are perfectly suited to your needs! The FF3C Concave combines the classic 5-spoke styling from our Heritage Series FF3 wheel with a concave center profile to create a wheel with stunning good looks, aggressive character, and plenty of room for caliper clearance and extreme brake fitment. Like all Forgeline Concave Series wheels, the FF3C locates the pad inboard of the outer rim to deliver depth and scale within the wheel center for a modern muscular look. Available in both deep concave profiles (for the most striking appearance) and shallow concave profiles (to create a staggered look or to accommodate narrow widths or higher-offset applications), these 3-piece wheels are assembled with hidden American-made stainless-steel ARP fasteners and Heli-Coil inserts. The FF3C is a custom made-to-order three-piece wheel that is produced from forged 6061-T6 aluminum centers with heat-treated rim-shells. And just like any Forgeline wheel, the FF3C is fully customizable in fitment and finish, including center lock applications. Muscular Concave Design Available in 18", 19", 20" and 22" Both Deep and Shallow Concave Profiles Available Classic 5-Spoke Design 3-Piece Modular Construction Reverse Flat-Lip Design Also available with a stepped-lip in 19", 20" and 22" diameters Hidden Stainless ARP Fasteners Heli-Coil Inserts Forged 6061-T6 Aluminum Center Heat-Treated Rim Shells Includes Standard Aluminum Center Cap Will Accommodate OE TPMS and Lug Nuts Customizable Fitment and Finish Options Legendary Forgeline Quality

Call us any time at 888-748-7223 for Discovery Parts-Exclusive Forgeline pricing you won't find anywhere else! Discovery Parts offers FREE SHIPPING on all Forgeline Wheel Orders! Forgeline ML3C Wheels (3-piece) Contact a wheel specialist today at 888-748-7223 to discuss the details of your custom Forgeline wheel build. We can guide you through sizing, offsets, finishes, and other details to make sure your Forgelines are perfectly suited to your needs! The Forgeline ML3C Concave Series wheel borrows styling references from the Minilite Trans Am wheels, of the late 1960s & early 1970s. But unlike its predecessor, the ML3C is a modern 3-piece wheel that is manufactured from fully forged 6061-T6 aluminum centers using the latest engineering and manufacturing technology. With ten semi-rounded soft-sided spokes for a retro look, the ML3C hearkens back to the golden age of racing, while delivering modern technology and performance. The ML3C is built with true forged 6061-T6 aluminum centers, aircraft-quality ARP stainless steel hidden fasteners, and heat-treated rim sections. The ML3C is available with a flat lip reverse outer in 18-inch, 19-inch, and 20-inch fitments and features a standard powder coated center finish with a polished outer rim. But since each wheel is custom built-to-order, Forgeline can also offer special features like custom offsets, center locking hubs, and a large choice of finish combinations. 3-Piece Concave Series Wheel Semi-Rounded Soft-Sided Ten-Spoke Design Flat-Lip Outer Hidden ARP Fasteners Forged 6061-T6 Aluminum Center Heat-Treated Rim Shells Includes Standard Aluminum Center Cap/li> Customizable Fitment and Finish Options Legendary Forgeline Quality