Smart Products Filter Index - Do not delete

HJC AR-10 III and HX-10 III Replacement Shields Polycarbonate injection molded construction for superior visibility and durability. Hard coated anti-fog interior. Pre-installed tear off posts. Available in Dark Blue, Chrome, Amber, Dark Smoke, and Clear. Genuine HJC Helmet Shields and Parts bring new life to your HJC auto racing helmet. HJC shields in different tints keep you ahead of the pack in every racing condition.

HANS Pro Ultra / Ultralite / Sport 1 Tether Kits Replace the tether kit on your HANS Pro Ultra / Ultralite / Sport 1 if you're involved in an incident, or swap out your existing tether for a longer or shorter one. For use with Sliding tethers and post anchors only.

Carbotech 1.8L Miata Sport Front 2001-2005 Fitting the front Mazda Sport brake package on the NB chassis 2001-2005 calipers, the Carbotech CT890 brake pad set is available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. How To Properly Bed In Carbotech Racing Brake Pads Carbotech 1.8L Miata Sport Front 2001-2005 Details: Manufacturer: Carbotech Manufacturer Part Number: CT890 Most popular track combination: XP10 Front, XP8 Rear G-Loc cross reference: GP890 Hawk cross reference: HB431._606 Material thickness of pad of backing plate and pad material: .606" Material thickness of pad of backing plate and pad material: 15mm [img-12163-left-large_default] BRAKE COMPOUNDS Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. Carbotech CT890 1.8L Miata Sport Front 2001-2005 Fitment: 2001 MAZDA MIATA W/ SPORT SUSPENSION ALL (2001, 2001) 2001 MAZDA MIATA WITH HARD OR SPORT SUSPENSION (2001, 2001) 2001 MAZDA MIATA WITH HARD OR SPORT SUSPENSION #N/A (2001) 2002 MAZDA MIATA W/ SPORT SUSPENSION ALL (2002, 2002) 2002 MAZDA MIATA WITH HARD OR SPORT SUSPENSION (2002, 2002) 2002 MAZDA MIATA WITH HARD OR SPORT SUSPENSION #N/A (2002) 2003 MAZDA MIATA W/ SPORT SUSPENSION ALL (2003, 2003) 2003 MAZDA MIATA NO SUBMODEL #N/A (2003) 2004 MAZDA MIATA W/ SPORT SUSPENSION ALL (2004, 2004) 2004 MAZDA MIATA MAZDASPEED ALL (2004, 2004) 2004 MAZDA MIATA NO SUBMODEL #N/A (2004) 2005 MAZDA MIATA W/ SPORT SUSPENSION ALL (2005, 2005) 2005 MAZDA MIATA MAZDASPEED ALL (2005, 2005) 2005 MAZDA MIATA NO SUBMODEL #N/A (2005) [img-12163-left-large_default]

Carbotech CT1001A Brake Pads Carbotech Race and Track Pads CT 1001A is a popular Audi, Porsche, Ford, Mitsubishi, Cadillac and Volvo front pad. Measuring 15mm thick and available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer part number: CT1001A Most popular track combination: R10 Front, R8 Rear G-Loc cross reference: GP1001A Hawk cross reference: HB453._585 but is .045" thinner Material thickness of pad of backing plate and pad material: .630" Material thickness of pad of backing plate and pad material: 16mm The Carbotech 1001A is 16mm thick. If you need a thinner .585" (15mm) thick pad use the Carbotech 1001. Carbotech Brake Compounds Carbotech 1521 The Carbotech 1521 is our high performance street compound. The 1521 compound is known for its release and modulation, along with unmatched rotor friendliness. 1521 is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech 1521 operating range starts out at ambient and goes up to 800F (426C+). 1521 is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotech 1521 is NOT recommended for ANY track use. Carbotech AX6 The AX6 is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50F to 1000F + (10C to 537C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6 for street driving as well, even though Carbotech doesn't recommend street driving with AX6 due to possible elevated levels of dust and noise. AX6 is NOT recommended as a race compound in most applications. Carbotech XP8 A high torque brake compound with a wide operating temperature range of 200F-1250F+ (93C to 676C+). Carbotech XP8 is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotech does NOT recommended XP8 as a daily driven street pad due to elevated levels of dust and noise. Carbotech XP8 is a great compound on the front & rear of most open wheel and sports racers. Carbotech XP10 When Carbotech unleashed the XP10 to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10 has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10 still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotech compounds so successful. Carbotech XP10 is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech XP12 Another highly successful XP series compound with an excellent initial bite, torque and fade resistance over and above the XP10 compound. XP12 has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12 has that excellent Carbotech release and modulation that has made all other Carbotech compounds so successful. The XP12 is more rotor aggressive than XP10, but compared to the competition the XP12 is still very rotor friendly. XP12 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. Carbotech CT1101A Brake Pad Fitment: 2002 MITSUBISHI LANCER EVOLUTION (2002, 2002) 2002 MITSUBISHI LANCER EVOLUTION #N/A (2002) 2003 MITSUBISHI LANCER EVOLUTION (2003, 2003) 2003 MITSUBISHI LANCER EVOLUTION #N/A (2003) 2003 MITSUBISHI LANCER EVOLUTION ALL (2003, 2003) 2004 CADILLAC CTS CTS-V; BREMBO CALIPERS (2004, 2004) 2004 CADILLAC CTS V 89047725 (2004, 2004) 2004 MITSUBISHI LANCER EVOLUTION (2004, 2004) 2004 MITSUBISHI LANCER EVOLUTION #N/A (2004) 2004 MITSUBISHI LANCER EVOLUTION ALL (2004, 2004) 2004 SUBARU IMPREZA WRX STI (2004, 2004) 2004 SUBARU IMPREZA WRX STI ALL (2004, 2004) 2004 SUBARU IMPREZA WRX STI NO SUBMODEL #N/A (2004) 2004 VOLVO S60 R MODEL (2004, 2004) 2004 VOLVO V70 R MODEL; 330MM FRONT DISCS (2004, 2004) 2005 CADILLAC CTS CTS-V; BREMBO CALIPERS (2005, 2005) 2005 CADILLAC CTS V 89047725 (2005, 2005) 2005 CADILLAC STS HEAVY DUTY 89047725 (2005, 2005) 2005 FORD GT NO SUBMODEL (2005, 2005) 2005 FORD GT NO SUBMODEL ALL (2005, 2005) 2005 MITSUBISHI LANCER EVOLUTION (2005, 2005) 2005 MITSUBISHI LANCER EVOLUTION #N/A (2005) 2005 MITSUBISHI LANCER EVOLUTION ALL (2005, 2005) 2005 MITSUBISHI LANCER EVOLUTION MR ALL (2005, 2005) 2005 MITSUBISHI LANCER EVOLUTION RS ALL (2005, 2005) 2005 SUBARU IMPREZA WRX STI (2005, 2005) 2005 SUBARU IMPREZA WRX STI ALL (2005, 2005) 2005 SUBARU IMPREZA WRX STI NO SUBMODEL #N/A (2005) 2005 VOLVO S60 R MODEL (2005, 2005) 2005 VOLVO V70 R MODEL; 330MM FRONT DISCS (2005, 2005) 2006 CADILLAC CTS CTS-V; BREMBO CALIPERS (2006, 2006) 2006 CADILLAC CTS V 89047725 (2006, 2006) 2006 CADILLAC STS HEAVY DUTY 89047725 (2006, 2006) 2006 CADILLAC STS V HD BRAKES; J56 ALL (2006, 2006) 2006 CADILLAC STS V STS-V SUPERCHARGED; BREMBO BRAKES ALL (2006, 2006) 2006 FORD GT NO SUBMODEL (2006, 2006) 2006 FORD GT NO SUBMODEL ALL (2006, 2006) 2006 MITSUBISHI LANCER EVOLUTION (2006, 2006) 2006 MITSUBISHI LANCER EVOLUTION #N/A (2006) 2006 MITSUBISHI LANCER EVOLUTION ALL (2006, 2006) 2006 MITSUBISHI LANCER EVOLUTION MR ALL (2006, 2006) 2006 MITSUBISHI LANCER EVOLUTION RS ALL (2006, 2006) 2006 MITSUBISHI LANCER EVOLUTION SE ALL (2006, 2006) 2006 SUBARU IMPREZA WRX STI (2006, 2006) 2006 SUBARU IMPREZA WRX STI ALL (2006, 2006) 2006 SUBARU IMPREZA WRX STI NO SUBMODEL #N/A (2006) 2006 VOLVO S60 R MODEL (2006, 2006) 2006 VOLVO V70 R MODEL; 330MM FRONT DISCS (2006, 2006) 2007 CADILLAC CTS CTS-V; BREMBO CALIPERS (2007, 2007) 2007 CADILLAC CTS V 89047725 (2007, 2007) 2007 CADILLAC STS HEAVY DUTY 89047725 (2007, 2007) 2007 CADILLAC STS V HD BRAKES; J56 ALL (2007, 2007) 2007 CADILLAC STS V STS-V SUPERCHARGED; BREMBO BRAKES ALL (2007, 2007) 2007 FORD MUSTANG SHELBY GT500 (2007, 2007) 2007 FORD MUSTANG SHELBY GT500 5.4L (2007, 2007) 2007 FORD MUSTANG SHELBY GT500 7R3Z2001A (2007, 2007) 2007 SUBARU IMPREZA WRX STI (2007, 2007) 2007 SUBARU IMPREZA WRX STI ALL (2007, 2007) 2007 SUBARU IMPREZA WRX STI NO SUBMODEL #N/A (2007) 2007 SUBARU IMPREZA WRZ STI LIMITED ALL (2007, 2007) 2007 VOLVO S60 R MODEL (2007, 2007) 2007 VOLVO V70 R MODEL; 330MM FRONT DISCS (2007, 2007) 2008 CADILLAC STS HEAVY DUTY 89047725 (2008, 2008) 2008 CADILLAC STS V HD BRAKES; J56 ALL (2008, 2008) 2008 CADILLAC STS V STS-V SUPERCHARGED; BREMBO BRAKES ALL (2008, 2008) 2008 FORD MUSTANG SHELBY GT500 (2008, 2008) 2008 FORD MUSTANG SHELBY GT500 5.4L (2008, 2008) 2008 FORD MUSTANG SHELBY GT500 7R3Z2001A (2008, 2008) 2008 FORD MUSTANG SHELBY GT500 ALL (2008, 2008) 2008 MITSUBISHI LANCER EVOLUTION; 2 PIECE FRONT ROTOR (2008, 2008) 2008 MITSUBISHI LANCER EVOLUTION; 2 PIECE FRONT ROTOR #N/A (2008) 2008 MITSUBISHI LANCER EVOLUTION; STANDARD FRONT ROTOR (2008, 2008) 2008 MITSUBISHI LANCER EVOLUTION; STANDARD FRONT ROTOR #N/A (2008) 2008 PONTIAC G8 GXP ALL (2008, 2008) 2008 SUBARU IMPREZA WRX STI (2008, 2008) 2008 SUBARU IMPREZA WRX STI ALL (2008, 2008) 2008 SUBARU IMPREZA WRX STI NO SUBMODEL #N/A (2008) 2009 CADILLAC STS HEAVY DUTY 89047725 (2009, 2009) 2009 CADILLAC STS V STS-V SUPERCHARGED; 6 LUG ALL (2009, 2009) 2009 FORD MUSTANG SHELBY (2009, 2009) 2009 FORD MUSTANG SHELBY GT500 5.4L (2009, 2009) 2009 FORD MUSTANG SHELBY GT500 7R3Z2001A (2009, 2009) 2009 FORD MUSTANG SHELBY GT500 ALL (2009, 2009) 2009 MITSUBISHI LANCER EVOLUTION; 2 PIECE FRONT ROTOR (2009, 2009) 2009 MITSUBISHI LANCER EVOLUTION; 2 PIECE FRONT ROTOR #N/A (2009) 2009 MITSUBISHI LANCER EVOLUTION; STANDARD FRONT ROTOR (2009, 2009) 2009 MITSUBISHI LANCER EVOLUTION; STANDARD FRONT ROTOR #N/A (2009) 2009 PONTIAC G8 GXP WITH 355MM DIAMETER FRONT ROTORS (2009, 2009) 2009 PONTIAC G8 GXP WITH 355MM DIAMETER FRONT ROTORS #N/A (2009) 2009 PONTIAC G8 GXP 89047725 (2009, 2009) 2009 PONTIAC G8 GXP ALL (2009, 2009) 2009 SUBARU IMPREZA WRX STI (2009, 2009) 2009 SUBARU IMPREZA WRX STI ALL (2009, 2009) 2009 SUBARU IMPREZA WRX STI NO SUBMODEL #N/A (2009) 2010 CADILLAC STS HEAVY DUTY 89047725 (2010, 2010) 2010 CADILLAC STS PLATINUM STS-V SUPERCHARGED; 6 LUG ALL (2010, 2010) 2010 FORD MUSTANG BASE OR GT WITH BREMBO FRONT CALIPERS (2010, 2010) 2010 FORD MUSTANG SHELBY (2010, 2010) 2010 FORD MUSTANG SHELBY GT500 7R3Z2001A (2010, 2010) 2010 FORD MUSTANG SHELBY GT500 ALL (2010, 2010) 2010 HYUNDAI GENESIS COUPE WITH BREMBO BRAKES (340MM (13.4") FRONT ROTOR) (2010, 2010) 2010 HYUNDAI GENESIS COUPE WITH BREMBO BRAKES (340MM (13.4") FRONT ROTOR) #N/A (2010) 2010 HYUNDAI GENESIS COUPE TRACK 581012MA10 (2010, 2010) 2010 HYUNDAI GENESIS COUPE TRACK W/BREMBO BRAKES ALL (2010, 2010) 2010 MITSUBISHI LANCER EVOLUTION; 2 PIECE FRONT ROTOR (2010, 2010) 2010 MITSUBISHI LANCER EVOLUTION; 2 PIECE FRONT ROTOR #N/A (2010) 2010 MITSUBISHI LANCER EVOLUTION; STANDARD FRONT ROTOR (2010, 2010) 2010 MITSUBISHI LANCER EVOLUTION; STANDARD FRONT ROTOR #N/A (2010) 2010 SUBARU IMPREZA WRX STI (2010, 2010) 2010 SUBARU IMPREZA WRX STI ALL (2010, 2010) 2010 SUBARU IMPREZA WRX STI NO SUBMODEL #N/A (2010) 2011 CADILLAC STS HEAVY DUTY 89047725 (2011, 2011) 2011 CADILLAC STS PLATINUM STS-V SUPERCHARGED; 6 LUG ALL (2011, 2011) 2011 FORD MUSTANG BASE OR GT WITH BREMBO FRONT CALIPERS (2011, 2011) 2011 FORD MUSTANG SHELBY (2011, 2011) 2011 FORD MUSTANG 5.0L PERFORMANCE W/BREMBO BRAKES 5.0L (2011, 2011) 2011 FORD MUSTANG 5.0L PERFORMANCE, BREMBO PACKAGE 7R3Z2001A (2011, 2011) 2011 FORD MUSTANG SHELBY GT500 7R3Z2001A (2011, 2011) 2011 FORD MUSTANG SHELBY GT500 ALL (2011, 2011) 2011 HYUNDAI GENESIS COUPE WITH BREMBO BRAKES (340MM (13.4") FRONT ROTOR) (2011, 2011) 2011 HYUNDAI GENESIS COUPE WITH BREMBO BRAKES (340MM (13.4") FRONT ROTOR) #N/A (2011) 2011 HYUNDAI GENESIS COUPE TRACK 581012MA10 (2011, 2011) 2011 HYUNDAI GENESIS COUPE TRACK W/BREMBO BRAKES ALL (2011, 2011) 2011 MITSUBISHI LANCER EVOLUTION; 2 PIECE FRONT ROTOR (2011, 2011) 2011 MITSUBISHI LANCER EVOLUTION; 2 PIECE FRONT ROTOR #N/A (2011) 2011 MITSUBISHI LANCER EVOLUTION; STANDARD FRONT ROTOR (2011, 2011) 2011 MITSUBISHI LANCER EVOLUTION; STANDARD FRONT ROTOR #N/A (2011) 2011 SAAB 9-5 BREMBO FRONT CALIPER; 355MM FRONT ROTORS (2011, 2011) 2011 SAAB 9-5 BREMBO FRONT CALIPER; 355MM FRONT ROTORS #N/A (2011) 2011 SUBARU IMPREZA WRX STI (2011, 2011) 2011 SUBARU IMPREZA WRX STI ALL (2011, 2011) 2011 SUBARU IMPREZA WRX STI NO SUBMODEL #N/A (2011) 2012 BUICK REGAL BREMBO FRONT CALIPER; VENTED REAR ROTOR (2012, 2012) 2012 BUICK REGAL TURBO GS ALL (2012, 2012) 2012 FORD MUSTANG BASE, GT, OR BOSS 302 WITH BREMBO FRONT CALIPERS (2012, 2012) 2012 FORD MUSTANG SHELBY (2012, 2012) 2012 FORD MUSTANG 5.0L PERFORMANCE W/BREMBO BRAKES 5.0L (2012, 2012) 2012 FORD MUSTANG BOSS 302 5.0L (2012, 2012) 2012 FORD MUSTANG BOSS 302 7R3Z2001A (2012, 2012) 2012 FORD MUSTANG GT BREMBO 7R3Z2001A (2012, 2012) 2012 FORD MUSTANG GT BREMBO ALL (2012, 2012) 2012 FORD MUSTANG SHELBY GT500 ALL (2012, 2012) 2012 FORD MUSTANG SHELBY GT500, BREMBO PACKAGE 7R3Z2001A (2012, 2012) 2012 HYUNDAI GENESIS COUPE WITH BREMBO BRAKES (340MM (13.4") FRONT ROTOR) (2012, 2012) 2012 HYUNDAI GENESIS COUPE WITH BREMBO BRAKES (340MM (13.4") FRONT ROTOR) #N/A (2012) 2012 HYUNDAI GENESIS COUPE TRACK 581012MA10 (2012, 2012) 2012 HYUNDAI GENESIS COUPE TRACK W/BREMBO BRAKES ALL (2012, 2012) 2012 MITSUBISHI LANCER EVOLUTION GSR; STANDARD FRONT ROTOR (2012, 2012) 2012 MITSUBISHI LANCER EVOLUTION GSR; STANDARD FRONT ROTOR #N/A (2012) 2012 MITSUBISHI LANCER EVOLUTION MR; 2 PIECE FRONT ROTOR (2012, 2012) 2012 MITSUBISHI LANCER EVOLUTION MR; 2 PIECE FRONT ROTOR #N/A (2012) 2012 SUBARU IMPREZA WRX STI (2012, 2012) 2012 SUBARU IMPREZA WRX STI ALL (2012, 2012) 2012 SUBARU IMPREZA WRX STI NO SUBMODEL #N/A (2012) 2013 BUICK REGAL BREMBO FRONT CALIPER; VENTED REAR ROTOR (2013, 2013) 2013 BUICK REGAL TURBO GS ALL (2013, 2013) 2013 CADILLAC ATS J55 HD BRAKE PACKAGE (2013, 2013) 2013 CADILLAC ATS W/ BREMBO FRONT CALIPER ALL (2013, 2013) 2013 CADILLAC ATS BREMBO FRONT BRAKE 22866931 (2013, 2013) 2013 CADILLAC ATS NO SUBMODEL ALL (2013, 2013) 2013 CADILLAC ATS PERFORMANCE 22791925 (2013, 2013) 2013 CADILLAC XTS 22976409 (2013, 2013) 2013 CADILLAC XTS 5 LUG, HEAVY DUTY BRAKES (2013, 2013) 2013 CADILLAC XTS PERFORMANCE 22866931 (2013, 2013) 2013 FORD MUSTANG BASE, GT, OR BOSS 302 WITH BREMBO FRONT CALIPERS (2013, 2013) 2013 FORD MUSTANG BOSS 302 5.0L (2013, 2013) 2013 FORD MUSTANG BOSS 302 7R3Z2001A (2013, 2013) 2013 FORD MUSTANG GT PERFORMANCE BRAKES ALL (2013, 2013) 2013 FORD MUSTANG SHELBY GT500 W/BREMBO BRAKES ALL (2013, 2013) 2013 FORD MUSTANG SHELBY GT500, FRONT TO 04/30/2012 7R3Z2001A (2013, 2013) 2013 HYUNDAI GENESIS COUPE WITH BREMBO BRAKES (340MM (13.4") FRONT ROTOR) (2013, 2013) 2013 HYUNDAI GENESIS COUPE WITH BREMBO BRAKES (340MM (13.4") FRONT ROTOR) #N/A (2013) 2013 HYUNDAI GENESIS COUPE TRACK 581012MA10 (2013, 2013) 2013 HYUNDAI GENESIS COUPE TRACK W/BREMBO BRAKES ALL (2013, 2013) 2013 MITSUBISHI LANCER EVOLUTION GSR; STANDARD FRONT ROTOR (2013, 2013) 2013 MITSUBISHI LANCER EVOLUTION GSR; STANDARD FRONT ROTOR #N/A (2013) 2013 MITSUBISHI LANCER EVOLUTION MR; 2 PIECE FRONT ROTOR (2013, 2013) 2013 MITSUBISHI LANCER EVOLUTION MR; 2 PIECE FRONT ROTOR #N/A (2013) 2013 SUBARU IMPREZA WRX STI (2013, 2013) 2013 SUBARU IMPREZA WRX STI ALL (2013, 2013) 2013 SUBARU IMPREZA WRX STI NO SUBMODEL #N/A (2013) 2014 BUICK REGAL GS 13329562 (2014, 2014) 2014 CADILLAC ATS BREMBO FRONT BRAKE 23145627 (2014, 2014) 2014 CADILLAC ATS PERFORMANCE 22791925 (2014, 2014) 2014 CADILLAC CTS SEDAN 23145627 (2014, 2014) 2014 CADILLAC CTS VSPORT PERFORMANCE, FRONT OE TO 03/2014 23441307 FROM 03/2014 22976409 (2014, 2014) 2014 CADILLAC XTS J64 BRAKE 18" WHEELS 23145627 (2014, 2014) 2014 CHEVROLET CORVETTE 23145627 (2014, 2014) 2014 CHEVROLET CORVETTE STING RAY WITH STANDARD JL9 BRAKE PACKAGE (2014, 2014) 2014 FORD MUSTANG BASE, GT, OR BOSS 302 WITH BREMBO FRONT CALIPERS (2014, 2014) 2014 FORD MUSTANG GT BREMBO TRACK 7R3Z2001A (2014, 2014) 2014 FORD MUSTANG GT BREMBO TRACK ALL (2014, 2014) 2014 FORD MUSTANG GT BREMBO W/AUTO TRANS ALL (2014, 2014) 2014 FORD MUSTANG GT BREMBO W/MANUAL TRANS ALL (2014, 2014) 2014 FORD MUSTANG GT PERFORMANCE BRAKES ALL (2014, 2014) 2014 HYUNDAI GENESIS COUPE TRACK 581012MA10 (2014, 2014) 2014 MITSUBISHI LANCER EVOLUTION 4605A572 (2014, 2014) 2014 SRT VIPER BLACK CALIPER 68232820AA (2014, 2014) 2014 SUBARU IMPREZA WRX STI (2014, 2014) 2014 SUBARU IMPREZA WRX STI ALL (2014, 2014) 2014 SUBARU IMPREZA WRX STI NO SUBMODEL #N/A (2014) 2015 BUICK REGAL GS 13329562 (2015, 2015) 2015 CADILLAC ATS BREMBO FRONT BRAKE 23145627 (2015, 2015) 2015 CADILLAC ATS PERFORMANCE 22791925 (2015, 2015) 2015 CADILLAC CTS 23441307 (2015, 2015) 2015 CADILLAC CTS SEDAN 23145627 (2015, 2015) 2015 CADILLAC ELR PERFORMANCE 23441307 (2015, 2015) 2015 CADILLAC XTS 23145627 (2015, 2015) 2015 CHEVROLET CAMARO 6.2 LITER 22907156 (2015, 2015) 2015 CHEVROLET CORVETTE 23145627 (2015, 2015) 2015 DODGE VIPER BLACK CALIPER 68232820AA (2015, 2015) 2015 HYUNDAI GENESIS COUPE TRACK 581012MA10 (2015, 2015) 2015 SUBARU WRX STI 26296FE100 (2015, 2015) 2015 TESLA S 105506600B (2015, 2015)

Carbotech CT1124 FRS/BRZ/GT86 Rear Brake Pad Set Carbotech brake pads for Subaru BRZ, Scion FRS, or Toyota GT86 Rear. AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. This if the pad if all 2013 and 2014 BRZ, FRS or GT86 rear axles, but for the 2015 fit the vented rear disks (292mm) only If you have a 2013-2014 BRZ, FRS, GT86, this your rear pad. If you have a 2015 BRZ, FRS, GT86 with a vented rear rotor (292mm), this your rear pad. If you have a 2015 BRZ, FRS, GT86 with a solid rear rotor (277mm), then you use CTB-1114 How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer Part Number: CT1124 Fits 2013-2014 all rear rotors: Yes Fits 2015 vented rear rotors: Yes Fits 2015 solid rear rotors: No, use CTB-1114 Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F.

Sparco X-Light + Racing Shoes The Sparco X-Light + is the ultimate ultra-light weight racing shoe. It was designed for the top level of professional drivers looking to save weight in every possible way while maintaining safety and high performance. The X-Light + is the only racing shoe on the market featuring a full fabric upper. This unique fireproof stretch fabric was developed by Sparco engineers to be breathable and durable while maintaining heat- and flame-resistance. The X-Light + stretch fabric wraps around the foot like a second skin, preventing dust, soil, and other materials from entering the shoe. Kevlar cables woven into the upper give your foot just the right amount of support. This combination provides an extremely comfortable, highly breathable fit while offering a high level of protection. The X-Light + is also the only racing shoe on the market with a carbon fiber sole. This special carbon fiber was developed by Sparco Engineers in the Sparco OEM Seating Division. Uniquely developed to be flexible, this carbon fiber is inlayed into the sole and runs from the heel to the toe. Carbon fiber is visible through the ultra-thin, oil-resistant, antistatic sole, offering exceptional pedal sensitivity. The cushioned inner sole of the X-Light + has a unique printed silicon pattern, giving this racing shoe added traction and pedal feel. The X-Light + is available in two colors: White/Black and Blue/White, in sizes from 39 to 46. The Sparco X-Light + is FIA 8856-2018 approved. SPARCO X-LIGHT+ RACE SHOE TECHNOLOGY  FIA 8856-2018 approved Ultra-light weight fire-retardant stretch fabric and soft leather construction Highly breathable upper fits like a second skin Full carbon fiber inlayed sole is ultra thin, antistatic, oil- and fuel-resistant Printed silicon cushioned inner sole for maximum pedal feel

CMS Performance Racing Gear Bag This high-quality gear bag is designed to carry everything you need for a weekend at the race track. Its large main compartment can be divided to keep your racing gear, helmet/HANS, etc. separate from your casual wear. It also features an expandable waterproof compartment to keep dirty or damp items separate. It features a durable heavy-duty nylon exterior with a padded interior held closed with heavy duty zippers for years of use. The CMS Performance Racing Gear Bag has three zippered compartments: a main compartment large enough for a fire suit, gloves, shoes, helmet, HANS, and other accessories; a front pocket to hold smaller gear and racing accessories; and a zippered "hamper" compartment to keep dirty or damp items separate. Includes three velcro dividers and a padded shoulder strap to make toting everything you need for a race weekend easy and convenient. DIMENSIONS: Main Compartment: 30" x 16" x 15" (76cm x 41cm x 38cm) Front Compartment: 21" x 11" x 2" (53cm x 28cm x 5cm)    

Stilo HANS Zero Head Restraint The Stilo HANS Zero combines the best of the Simpson's HANS development group with a fresh Italian design engineered in partnership with Italian helmet manufacturer Stilo. The result is the absolute extreme in weight saving along with HANS proven safety technology to create the lightest, most comfortable HANS Device ever.1 Using proprietary techniques and aerospace grade carbon fiber, the Stilo HANS Zero is 15% lighter than the HANS Ultra Lite (now the next-lightest HANS on the market). SFI 38.1 certified, FIA 8858 approved, made in America. This patented HANS Device is hand-made from carbon fiber. A single piece that rests on a race driver's shoulders, the HANS Device keeps you safe and comfortable behind the wheel of your race car. Stilo HANS Zero Head Restraint Details Manufacturer: Stilo Manufacturer part no.: DK19338.311-FIASFI Layback angle: 30 degrees Size: medium only Homologation: FIA 8858-2010 and SFI 38.1 Helmet Type: Snell SA and FIA helmets with integrated M6 terminals The lightest HANS device available Pads wrapped in fire-retardant material for safety and comfort Includes post anchors and tether 1 Note: this HANS device comes with a 30o layback angle in size Medium only (which we've tested and works in both open and closed cars). Feel free to give us a call at (888) 748-7223 for more details.

Lifeline Zero 360 FIA 2.25kg Zero FK Manual Activation System Ground Shipping Only. Pressurized bottles cannot be shipped via air. The Zero 360 Zero FK range of car fire extinguishers are significantly smaller and lighter than the current generation of FIA certified foam systems, offering far better packaging within the confines of the modern competition vehicle. Offering all the benefits of a Zero 360 Zero FK system but competitively price positioned, Lifeline popular Fire Marshal brand has now been extended to the Zero 360 range. Zero FK Zero 360 has moved the boundaries of motorsport car fire extinguishers. Using only the finest materials in both its construction and installation kit this system performed extremely well in the FIA tests for plumbed in fire systems which were witnessed by the British Standard Institute. This is the perfect introduction for anyone looking to upgrade their fire suppression system to enjoy the efficient, lightweight and compact benefits of the Zero 360 Zero FK range. Zero FK agent has replaced Novec 1320 as of September 2024. FEATURES: FIA Homologated Smaller and lighter than ever! Bottle length 10.5" top of handle to bottom of bottle 2.25kg Zero FK liquid clean agent extinguishant Highest quality Constant discharge in any orientation Excellent fire knock down and fire out capabilities Two year service cycle The choice of world championship winning constructors KIT INCLUDES: 8mm Tube (x 6m) Bracket and Straps (x 1) Heatproof Over Braid (x 6m) Straight Inlet Nozzle (x 2) Double Z Nozzle (x 3) 8mm Equal T Connector (x 1) 8mm Bulkhead Fitting (x 1) Tube Clips (x5) 4 Way Connector (x 1) Decal Pack (x1) 2m/6ft Pull Cable (x1) 4m/12ft Pull Cable (x1) Cable Nipple (x1)

Alpinestars Tech-1 Z v3 Racing Shoes Alpinestars Tech-1 Z v3 Racing Shoes: Feel the Road, Not the Fatigue Ever wished your racing shoes hugged your feet like that one aunt at family reunions? Well, wish no more! The Alpinestars Tech-1 Z v3 racing shoe is here to give your feet the embrace they've been yearning for. With its new "sock" construction, it's like slipping into your favorite pair of socks, but with the added bonus of making you feel like a racing legend. Why It's The Real MVP: Sock-Like Fit: Designed to snugly fit around your ankle, ensuring you're comfortable even during the most intense races. Premium Lightweight Design: SFI 3.3/5 homologated, because we know you want the best without the weight. Ergonomic Foot Bed: Keeps your foot in a natural posture, ensuring you can focus on the race and not on adjusting your foot. Aramidic Speed Lacing System: Because who has time for regular laces? This system ensures a secure fit without any stress points. One-Piece Toe & Heel Counter: Multi-compound construction for maximum support, stability, and protection. Your feet will thank you. ALPINESTARS TECH 1-Z V3 RACE SHOE CONSTRUCTION & PROTECTION Main upper made from bovine leather because your feet deserve luxury. Elastic collar with silicon printing for that long-lasting durability. Front and rear pull tabs, because we know every second counts. Perforated inner gusset padding for that breezy feel. Lightweight padding around the heel and footbed for that extra comfort. All graphic detailing uses transfer technology, ensuring you're light on your feet. Lace Lock System to keep everything in place. Para-Aramidic tubular lining for that top-notch heat resistance. Complies with SFI 3.3/5 homologation standards. Fireproof collar and gusset for that extra peace of mind. Integrated fireproof PU heel, because we care about every inch of your foot. ALPINESTARS TECH 1-Z V3 RACE SHOE FEATURES Exclusive F1-derived thin rubber compound sole for that unmatched pedal sensitivity. Extensive perforation zones for maximum ventilation. Your feet need to breathe too!

Sparco Futura Nomex Gloves The Sparco Futura glove is the first glove in the world that is constructed with Sparco Full Efficiency technology. The Futura features “hybrid” finger stitching. The fingers are both external and internal stitched for comfort. The palm features high-grip silicon for maximum grip performance. Available in four colorways and in sizes 8-13. FIA 8856-2018 and SFI 3.3/5 approved.   SPARCO FUTURA GLOVE TECHNOLOGY Made with Full Efficiency regenerated fabric Breathable Upper Hybrid finger stitching, both internal and external seams Printed silicon palm SFI 3.3/5 approved FIA 8856-2018 approved   SPARCO FUTURA GLOVE FULL EFFICIENCY With over 45 years of experience developing racing products, Sparco has produced the first ever line of Environmentally Conscious racing products. The ‘FULL EFFICIENCY” life cycle was developed by the continuous work of our R&D team, alongside extensive Life Cycle Assessment (LCA) certifications. By reviewing the manufacturing process to achieve “zero waste”, we are regenerating the excess material sections that are normally discarded. Sparco has created innovative techniques for spinning and weaving these fibers. The Full Efficiency project represents Sparco’s commitment to creating a virtuous production cycle, where at least 51% of production is from regenerated materials.     SPARCO FUTURA GLOVE PROPRIETARY TECHNOLOGY Life Cycle Assessment (LCA) Certified Fully controlled textile supply chain with innovative techniques for the spinning and weaving of regenerated fibersZero Waste Target FIA 8856-2018 approved

Sparco SP F5 Shoes MAIN FEATURES Exclusive Italian Design Ideal for everyday driving SNUG FIT being a racing-inspired model, the fit is snug. It is recommended to choose one size larger than the usual one. SPARCO SP F5 CONSTRUCITON Upper: synthetic material, fabric, leather Internal lining: synthetic material, fabric Sole: rubber Details: metal eyelets, round toe

Rent An Up-To-Date HANS Device Right At AMP! Discovery Parts store in the AMP paddock carries a full complement of HANS devices to make sure every driver is safe out on the race track. You can rent a HANS device for up to four days. Your rental is due back to Discovery Parts by 5pm on the final day of your rental.

Carbotech 1.8L Miata Sport Rear 2001-2005 Fitting the Mazda Sport brake package on the NB chassis 2001-2005 rear calipers, the Carbotech CT891 brake pad set is available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. How To Properly Bed In Carbotech Racing Brake Pads Carbotech 1.8L Miata Sport Rear 2001-2005 Details: Manufacturer: Carbotech Manufacturer Part Number: CT891 Most popular track combination: XP10 Front, XP8 Rear G-Loc cross reference: GP891 Hawk cross reference: HB442._606 Material thickness of pad of backing plate and pad material: .496" Material thickness of pad of backing plate and pad material: 13mm [img-12164-left-large_default] BRAKE COMPOUNDS Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. Carbotech 1.8L Miata Sport Rear 2001-2005 Fitment: 2001 MAZDA MIATA WITH HARD OR SPORT SUSPENSION #N/A (2001) 2001 MAZDA MIATA WITH SPORT SUSPENSION (2001) 2002 MAZDA MIATA WITH HARD OR SPORT SUSPENSION #N/A (2002) 2002 MAZDA MIATA WITH SPORT SUSPENSION (2002) 2003 MAZDA MIATA WITH SPORT SUSPENSION (2003) 2003 MAZDA MIATA NO SUBMODEL #N/A (2003) 2004 MAZDA MIATA NO SUBMODEL #N/A (2004) 2005 MAZDA MIATA NO SUBMODEL #N/A (2005) [img-12164-left-large_default]

Spa Decabon T Fitting - 6mm SPA T fitting for 6mm Decabon tubing used with SPA fire systems. If you are running your fire discharge outlet line and need to split it into 2 areas, this is the way to do it correctly. Can I run this SPA T fitting with my aluminum line from another manufacturer? NO. SPA tubing and fittings are unique to themselves and are not interchangeable with other manufacturers. SPA Decabon Tee Fitting - 6mm Details: Manufacturer: SPA Technique MAnufacturer part number: 02-SP-015 Trade name: "T" Fitting Usage: Connecting 3 pieces of Decabon tubing together [img-4410-left-large_default]

Sparco Lap Nomex Gloves The Sparco Lap racing glove is a glove that packs high-end features into a reasonably priced package. The Lap features a unique elastic cuff system which is extremely comfortable and was designed to work well with the Sparco Competition suit. The Lap also features “hybrid” finger stitching. The fingers are both external and internal stitched for comfort. The external stitching is used on the palm side of the finger so the driver does not have any pressure points from the stitch lines. The upper side of the finger is traditional internal stitching. This gives the glove excellent durability as the stitches are not exposed. The palm features high-grip smooth silicon for maximum performance. SPARCO LAP AUTO RACE GLOVE TECHNOLOGY Unique Elastic Cuff System Pre-Curved Hybrid Fingers Anatomically correct palm that contours to the natural shape of the hand Printed smooth high-grip silicon increases grip, comfort and dexterity FIA 8856-2018 and SFI 3.3/5 approved SKU 001316