New products

  Silver Rocket GT4 RS Flex-Carbon DRS-1 Swan Neck Wing This product fits the following cars: Porsche 718 GT4 RS (2022+) Porsche 718 GT4 / 981 GT4 (with Silver Rocket GT4 3-Inch Swan Neck Wing Riser) Porsche 718 / 981 Cayman (with Silver Rocket Dry Carbon Fiber V-Frame Tailgate & Wing Riser) Record-Setting New Wing For The Porsche 718 GT4 RS This brand new update of the Silver Rocket DRS-1 Flex-Carbon Swan Neck Wing features a more aggressive streamlined design with screw-less dry carbon fiber endplates, elevating its aesthetic appeal for the Porsche 718 GT4 RS. In traditional wings, aluminum inner structures are used at the mounting points. However, in the Silver Rocket Flex-Carbon Wing, aluminum has been replaced with the Silver Rocket Flex-Carbon structure, reducing weight by 1.5 kg (3.3 lbs.). Most importantly, the Flex-Carbon structure provides unparalleled flexibility, similar to that seen in the McLaren F1 Flex Wing. Experience The Passive DRS Effect Silver Rocket's tests on the Shanghai F1 track demonstrate that the DRS-1 wing can passively drop back by 1.5º Angle of Attack at speeds between 93 and 167 mph, resulting in an 5 mph increase in top speed compared to traditional wings. For the Porsche 718 GT4 RS, this improvement translates to a lap time reduction of 0.5 seconds! Highlights of the Silver Rocket DRS-1 Flex-Carbon Wing Lightest Swan Neck Rear Wing For GT4 RS: weighing only 5.8 lbs. (2.6 kg), the Silver Rocket DRS-1 Flex-Carbon Swan Neck Wing is 3.3 lbs. lighter than the stock Porsche GT4 RS wing, and 2.1 lbs. lighter than the stock GT4 RS Clubsport wing. Full CFD Simulation Plus On-track Testing: the Silver Rocket DRS-1 Flex-Carbon Swan Neck Wing undergoes numerous CFD simulations, aggressive lab testing, plus intensive on-track driving to gather real-world aero data, verifying its peak performance. Racing-Grade 100% Dry Carbon Fiber: crafted from 100% racing-grade dry carbon fiber, the Silver Rocket wing boasts exceptional structural strength, leaving no room for compromise. Six AOA Settings: following Porsche Motorsport guidance, the Silver Rocket DRS-1 offers six different angle-of-attack settings, ranging from -2.5º to +15º. Developed based on Porsche Motorsport guidance, these settings offer maximum maneuverability. Peak Reliability: the Silver Rocket DRS-1 Flex-Carbon Swan Neck Wing can sustain over 500 lbs. of downforce, with L-mounts constructed using SUS 304 1/2H stainless steel, enhancing both reliability and rigidity at the connection point. You can trust the Silver Rocket DRS-1 in the most demanding conditions on the race track or in the streets.

Silver Rocket GT4 RS Dry Carbon Fiber 3" Wing Risers This product fits the following car: Porsche 718 GT4 RS (2022+) The Silver Rocket GT4 RS Dry Carbon Fiber 3-inch Wing Riser is the only carbon fiber riser available on the market that is 100% customized for the Porsche 718 GT4 RS model. It is the upgraded version of our best-selling Silver Rocket GT4 RS 3-inch wing riser (OEM AlSi7Mg casting). The Silver Rocket 3" Dry Carbon Fiber Wing Riser raises the Porsche 718 GT4 RS rear wing up 3 inches into the cleaner air flowing over the top of the car, adding downforce and improving rearward visibility from within the cockpit. Silver Rocket 3" CF Wing Riser Highlights Lightest Wing Riser: weighing in at only 3.3 lbs (1493g), the Silver Rocket 3" Dry Carbon Fiber Wing Riser is 2.4 lbs (1089g) lighter than the stock Porsche wing brackets, making it the lightest wing riser for the GT4 RS. Track-tested Quality: Silver Rocket uses 100% racing-grade dry carbon fiber in the making of this wing riser to ensure its superior quality. The riser has been rigorously tested both in the lab and on track, exhibiting great strength and stability under extreme conditions during lap time record tests. It can withstand over 500 lbs. of downforce even with the Porsche Clubsport Rear Wing, while maintaining extreme stability. Improved Rear Visibility: the Silver Rocket 3" Dry Carbon Fiber WIng Risers also provide added visibility benefits. See clearly through the rear mirror, crucial for high-speed racing safety. Enhanced Downforce: by extending the factory wing 3 inches higher, these Silver Rocket risers enhance rear downforce, delivering exceptional performance on both the track and street. Sleek Full Carbon Aesthetics: with its 100% dry carbon fiber construction, sleek design, and attention to detail, this wing riser elevates the overall appearance of your GT4 RS to a whole new level. Hassle-Free Installation: it is designed to be 100% OEM compatible, seamlessly integrating with your Porsche 718 GT4 RS. No need for drilling additional holes or complex modifications. Install with ease and get ready to experience the difference. The SR GT4 RS Dry Carbon Fiber 3-inch Wing Riser optimizes rear wing downforce by raising the factory wing 3 inches, further improving the car's aerodynamic performance. Additionally, it improves rear-view visibility to ensure that the driver's overall rear vision, particularly in high-pressure track environments, is not obstructed by the wing, significantly enhancing driving safety.

Silver Rocket 3D Porous Cooling LWB Seat Insert For Porsche This product fits the following cars: 1 Porsche GT3/GT3RS (991) Porsche GT3/GT3RS (992) Porsche Cayman GT4/GT4RS (718) Porsche Boxster Spyder RS (718) Porsche Cayman GT4 (981) Experience Maximum Comfort In Your Porsche LWB Seat Say goodbye to feeling stuffy or clammy in your Porsche carbon fiber LWB seat during the summer months! The Silver Rocket 3D Air-Cooled Seat Insert features a unique three-dimensional porous structure that offers maximum ventilation and cooling for the driver, providing unparalleled comfort and support particularly on longer rides. Version 2.0 Improvements Silver Rocket Wrapping Edge Added: the driver's back is now fully wrapped, reducing movement and providing enhanced support. Integrated Softness and Comfort: the Silver Rocket engineering team has integrated two comfort structures into a single piece. The top 30% features a soft structure for a gentle, wrapping feel, while the bottom 70% consists of a firmer structure for added support. Product Highlights Comfortable Support: Compared to the Porsche OEM LWB seat, the driver's back will feel well wrapped and supported. Even better, the combination of two different firmness levels and the material's superior elasticity creates a gentle massaging sensation, ensuring that fatigue is minimized even during long drives. Maximum Ventilation: Unique 3D porous air-cooling structure offers maximum ventilation and cooling for the driver, solving the problem of the Porsche LWB seat being stuffy in summer. Super Hygiene: SR seat insert is designed without fabric, allowing for easy cleaning with high-pressure water sprays. It dries quickly with the use of fans, ensuring optimal hygiene. 1 Note: This product fits Porsche cars fitted with OEM carbon fiber lightweight bucket (LWB) seats only.

Silver Rocket Seat Angle Adjuster for Porsche Lightweight Buckets This Adjuster Fits the Following Cars: Porsche 981 GT4, 718 GT4 / RS with LWB seat Porsche 991 GT2 RS, 991 GT3, 991 GT3 RS with LWB seat The Silver Rocket Porsche LWB Seat Angle Adjuster is an optimization accessory designed by the Silver Rocket racing team based on years of experience in endurance racing with Porsche race cars. It is specifically designed for Porsche's original carbon fiber bucket seats (known as "Lightweight Bucket" or "LWB" seats), aiming to create a comfortable sitting position similar to Porsche race cars. This makes for a more comfortable driving experience. The Silver Rocket Porsche LWB Seat Angle Adjuster can increase the backward tilt angle of the seat, giving you relief from the very upright original posture that's not suitable for extended-time driving. The original seat angle can cause discomfort in the neck due to the head being forced forward, especially when wearing a helmet and HANS device. In addition, through Silver Rocket's exclusive innovative design and precise production process, the Seat Angle Adjuster perfectly fits Porsche's original LWB seats so the seat height and front-back adjustment function is retained without damaging the seat rails. Finally, to ensure maximum safety in a track environment, Silver Rocket uses ultra-high strength TC-4 titanium alloy, making the Seat Angle Adjuster stronger than the Porsche seat structure itself. Silver Rocket LWB Seat Angle Adjuster Benefits Premium TC-4 Titanium: Silver Rocket Porsche LWB Seat Angle Adjuster is made of a more expensive aerospace-grade TC-4 titanium alloy, which surpasses traditional aluminum in every aspect. Especially in high-pressure track driving, it provides over 10 times aluminum alloy's tensile strength and yield strength, giving you a safer driving experience and better durability. Perfect Contouring:  The Silver Rocket Seat Adjuster is precisely CNC-machined to perfectly follow the contours of the mating surfaces of your LWB seats, creating the rigid structure that professional racers prefer. Minimally Invasive Design: Unlike other products, this unique design does not mount to the seat slider hinges, ensuring that your slider remains undamaged and fully functional. Sleek Appearance: The Silver Rocket Seat Angle Adjuster is finished with electroplated black nickel, giving it a sleek and polished appearance that complements the interior aesthetics of your Porsche. By increasing the incline of the driver's seat, you can achieve a better seating posture for both high-performance driving and long-distance comfort. This is particularly crucial when wearing a helmet on the track. The original upright seating position can force your head to bend forward with extensive discomfort and loss in performance. With the Silver Rocket Porsche LWB Seat Angle Adjuster, you create more space to accommodate your head or helmet, allowing for a much more natural and comfortable driving position.

Silver Rocket Dry Carbon Tailgate & Glass For Porsche 718/981 Cayman This Tailgate Fits the Following Cars: Porsche Cayman 981 (all) Porsche Cayman 718 (all) Superior Materials and Manufacturing Constructed from aerospace-grade dry carbon fiber, the new Silver Rocket Dry Carbon Fiber Tailgate and Lightweight Glass reduce weight by up to 20.7 lbs. compared to the OEM Cayman tailgate & wing assembly. The Silver Rocket super strong V-frame and honeycomb core are engineered to support larger wings, handling downforce levels of up to 600 kg / 1,322 lbs while maintaining exceptional stability. The Silver Rocket Dry Carbon Tailgate is specially designed and engineered to accommodate a backward-extended (gooseneck) rear wing setup. Exquisite craftsmanship and attention to detail ensure that the Silver Rocket Dry Carbon Fiber Tailgate with Lightweight Glass complements the carbon fiber aesthetics pioneered by Porsche's GT4 RS Weissach Pack. This package includes the crystal-clear Silver Rocket HD lightweight polycarbonate glass, eliminating concerns about cracking the OEM rear backlight (especially the costly GT4 RS special thin rear glass). Compatible with both OEM GT4 and GT4 RS wing supports as well as Silver Rocket dry carbon fiber wing risers. Extremely Lightweight and Beautifully Constructed Constructed from 100% aerospace-grade dry carbon fiber, the Silver Rocket V-Frame tailgate is 6.4 kg (13.7 lbs) lighter than the stock tailgate of the GT4 RS. When combined with the SR Carbon Fiber Wing Support and SR Wing, this results in a total weight savings of 20.7 lbs at a high center-of-gravity point compared to the OEM Porsche setup. Porsche has incorporated super-thin glass into the GT4 RS tailgate to reduce weight. However, this thin, lightweight glass is prone to cracking, even in automatic car washes. To make matters worse, the OEM tailgate glass comes with a staggering price tag of $2,600. In response to this issue, Silver Rocket has developed their own HD Lightweight Polycarbonate Glass, which is included in the Dry Carbon Fiber Tailgate package at no additional cost. This innovative solution not only reduces weight but also alleviates concerns about the fragility of the expensive GT4 RS rear glass. Touring Version Available In response to requests from several VIP customers, Silver Rocket have designed a special Touring version of the V-Frame Dry Carbon Fiber Tailgate that eliminates the cutouts for rear wing mounts. Please note that this Touring version is custom built-to-order only, with a lead time of approximately 8-10 weeks. Call us at (844) 438-7244 or email sales@competitionmotorsport.com for more details or for help placing your order. Silver Rocket Dry Carbon Fiber Tailgate + Glass Kit Details Manufacturer: Silver Rocket Advanced Motorsport Engineering Manufacturer part no.: SR-718TG Fits all Porsche 718 and 981 Cayman models Manufactured from 100% aerospace-grade dry carbon fiber Includes crystal-clear Silver Rocket HD lightweight polycarbonate glass Straightforward installation with very detailed instruction manual and step-by-step photos This product is intended for off-road, race track use only.

Silver Rocket Roll Cage Anchor Kit For Porsche 718 Cayman This Roll Bar Fits the Following Cars: Porsche Cayman 981 (all, without factory Clubsport Roll Cage option) Porsche Cayman 718 (all, without factory Clubsport Roll Cage option) Superior Materials and Manufacturing Made with high-strength aircraft-grade 7075-T6 aluminum alloy, the Silver Rocket Cayman Roll Cage Anchor Kit involves over 50 hours of precise CNC manufacturing. Designed to fit all 718 models without the factory Clubsport Roll Cage option (e.g., all U.S. cars), this anchor kit is an amazing solution for installing the Silver Rocket Dry Carbon Fiber Roll Cage or retrofitting a Porsche Clubsport Roll Cage into any 718 model that doesn't have the Clubsport option. Extremely Lightweight and Durable Silver Rocket's innovative, lightweight design keeps weight down to only 460g (16.2 oz.). Yet the Silver Rocket Anchor can withstand over 34.6 kN (3.5 metric tons) of force and provides 494 Mpa of tensile yield strength, over 20% more than the Porsche OEM design. Easy Installation With All Necessary Templates and Tools All interior cutting templates, adhesives, and necessary tools are provided in the Silver Rocket Roll Cage Anchor Kit, plus a very detailed installation manual with step-by-step photos. Say goodbye to the pain and complexity of installing a roll cage or roll bar into any Porsche 718 or 981 Cayman model without the Porsche Clubsport factory preparation. Silver Rocket Roll Cage Anchor Kit Details Manufacturer: Silver Rocket Advanced Motorsport Engineering Manufacturer part no.: SR-718AK Fits all Porsche 718 and 981 Cayman models without the factory Clubsport Roll Cage option Manufactured from 100% aerospace-grade 7075-T6 aluminum alloy Very high strength and light weight CAD-optimized design Straightforward installation with very detailed instruction manual and step-by-step photos This product is intended for off-road, race track use only.

Silver Rocket Dry Carbon Roll Bar For Porsche 718 & 981 Cayman This Roll Bar Fits the Following Cars: Porsche Cayman 718 (all models*) Porsche Cayman 981 (all models*) The First Ever Dry Carbon Fiber Roll Bar Designed for the GT4RS Introducing the first ever Dry Carbon Fiber Roll Bar in the world for Porsche 718 Cayman GT4 RS. The Silver Rocket Dry Carbon Fiber Roll Bar is tested by TÜV and exceeds FIA 253 standards. This roll bar fits all Porsche 718 and 981 models! Check out the amazing TÜV/FIA testing video... * Note: models not equipped with the factory Clubsport option (including all U.S. models) require the Silver Rocket 718 Cayman Roll Cage Anchor Kit (can be added in the dropdown above) for installation. Most EU models do not require this kit. Silver Rocket Dry Carbon Fiber GT4RS Roll Bar Details Manufacturer: Silver Rocket Advanced Motorsport Engineering Manufacturer part no.: SR-718CFRB Safest roll cage for the Porsche 718 & 981 Cayman, including the 718 GT4 RS! Tested by TÜV (see the test report here) Manufactured from 100% aerospace-grade dry carbon fiber Aesthetically tailor-made for the GT4 RS Exceeds FIA safety standard for race cars Built-in FIA safety-compliant harness bar Zero rear-view mirror disruption/blockage Customer Installations This product is intended for off-road, race track use only.

Ferodo FRP3170H DS2500 Rear Brake Pads for C8 Corvette Z06 Replacement pads for OEM Brembo 4-piston rear calipers and 380mm iron discs on the 2023+ Chevrolet Corvette C8 Z06 (Standard Iron Brakes: Code J56). The DS2500 compound is one of the best street/track pads available. No need to change to track pads and then to street pads every weekend. Now enjoy linear high-torque braking on the best of mountain rides and mild track days NOTE: These pads do not accept the OEM wear sensors Ferodo FRP3170H Details: Manufacturer: Ferodo Manufacturer part number: FRP3170H-N Pads in box: 4 Primary Use: Street Performance & Light Track Application: All vehicle types Average Coefficient of Friction: 0.41µ Temperature Range C: 0 - 500 C Temperature Range F: 32 - 932 F Ferodo DS2500 Brake Compound Details:The Ferodo DS2500 is the best hybrid street and track day pad available. Designed for driving on the street, mountain runs and light track day with a stable average friction coefficient of 0,41 over a wide working temperature range of 32 to 932 F, (0 to 500 C)Featuring a moderately high initial bite and the solid fade resistance of a trackpad, but with relatively low dust and noise levels of a street pad. When the Ferodo DS2500 is used as a street pad, it can produce some squeal on most vehicle platforms. The most common use of the Ferodo DS2500 is mountain runs, autocross, and some light track duty on street tires in colder temperatures.When used on track on heavy (3,000+ lbs.+) track cars with high horsepower and R Compound tires, the DS2500 pad wear rates tend to be considerably higher vs. Ferodo Racing's other compounds. Do not expect to win the WRL GTU class on Ferodo DS2500 brake pads, but it is the perfect dual purpose street and light track day pad. Ferodo FRP3170H Rear Axle Fitment: 2025 Chevrolet Corvette Z06 Iron Brakes (J56) 2024 Chevrolet Corvette Z06 Iron Brakes (J56) 2023 Chevrolet Corvette Z06 Iron Brakes (J56)

Ferodo FRP3170G DS3.12 Rear Brake Pads for C8 Corvette Z06 Replacement pads for OEM Brembo 4-piston rear calipers and 380mm iron discs on the 2023+ Chevrolet Corvette C8 Z06 (Standard Iron Brakes: Code J56).  The Ferodo DS3.12 brake pad has the flattest torque curve across the largest temperature range with very high torque for repeatable stops, lap after lap. ***NOTE: These pads do not accept the OEM wear sensors*** Ferodo FRP3170G DS 3.12 Details: Manufacturer: Ferodo Manufacturer part number: FRP3170G-N Pads in box: 4 Primary Use: Endurance Race Application: Downforce Touring Car, Extreme GT, Time Attack Highest friction coefficient and bite in the Ferodo Racing range Reproducible and stable performance up to 850 C under all pressure and speed conditions Excellent management of ABS during the brake event Longest pad life of Ferodo Racing range under heavy duty track use Recommended for track use on larger vehicles with ABS Recommended for sprint and medium duration races Ferodo DS3.12 Brake Compound Details: The Ferodo DS3.12 is a track only compound with the flattest torque curve across the largest temperature range with very high torque. The Ferodo DS3.12 is identified with production code "G" and is the latest evolution in the Ferodo's DS track-only brake pad line. Designed for Hyper, Super and modern sports cars that have increased horsepower, more aero, higher curb weight, and stickier tires.These attributes all place greater demands on the vehicle’s ABS system. The Ferodo DS3.12 is the modern pad compound designed from the start to explicitly handle those demands. Out of all the pad compounds we have ever tested, even from manufacturers, the DS3.12 shows the flattest torque curve across the broadest temperature range. That means that on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu than all of Ferodo’s other compounds, so not as much leg pressure is required to initiate the desired response. It is also unfadable, showing no drop in performance at any temp your brakes will ever see. In dyno testing, the DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to the discs. We believe the DS3.12 will become the gold standard to which other race compounds will be compared. Ferodo FRP3170G Rear Axle Fitment: 2025 Chevrolet Corvette Z06 Iron Brakes (J56) 2024 Chevrolet Corvette Z06 Iron Brakes (J56) 2023 Chevrolet Corvette Z06 Iron Brakes (J56)

AiM Sports MyChron 6 2T Digital Data Logging Dash For Kart Racing Available now! The world's #1 racing go kart data logger just got even better. Get your hands on the latest innovation in karting data logging and analysis, the AiM MyChron 6 2T Data Logger for racing go karts. The AiM MyChron 6 is an advanced kart data logger, specifically designed for competitive kart racers looking to analyze and enhance their performance. The MyChron 6 features improved GPS technology (compared to MyChron 5s) for precise lap timing, configurable displays for real time data logging and integrates seamlessly with Race Studio 3 software for data management. New in MyChron 6 The MyChron 6 now boasts an improved 20-hour battery life, doubling the 10-hour battery life of the MyChron 5. This allows for extended racing sessions without frequent recharges. Integrated Bluetooth for connection to smart watches to monitor heart and health vitals. Improved GPS accuracy with GPS09, further improving data collection The visual on-screen Delta Lap Timer function allows drivers to instantly view sector times and compare laps more effectively, helping refine racing lines and shave seconds off lap times. The MyChron 6 features a larger screen measuring 150 x 79 x 36.6mm, compared to the MyChron 5’s 137 x 88 x 30mm display. This wider display allows for clearer data presentation and enables an exclusive on-screen delta bar animation, which provides real time graphical feedback comparing your current lap time to your best. The USB Type-C port ensures faster downloads and rapid charging, making data transfer between the device and your laptop, phone or tablet even more efficient. Introducing the MyChron6, a cutting-edge data logger engineered specifically for karting enthusiasts. Available now, this powerful device combines advanced sensor technology, rugged construction, and a user-friendly interface to give racers at every level the ultimate performance insights. Crystal-Clear Display & LED Alerts High-Resolution LCD: 320×136-pixel, 16-level grayscale display with 8 configurable RGB backlight colors for excellent visibility.Shift Lights & Alarm LEDs: Five customizable RGB shift lights plus two alert LEDs ensure you never miss critical information.Next-Generation Connectivity Wi-Fi & Bluetooth: Seamless data transfer, firmware updates, and configuration via wireless connection. Aux CAN Connection: Allows for easy integration of additional modules and sensors. USB Port: Convenient data download, mass storage support, and battery charging.Precision Timing & Track Mapping 25 Hz GPS: Highly accurate lap timing and real-time position tracking. Built-in track database recognizes circuits automatically.Digital Inputs/Outputs: Optical and magnetic lap signal inputs, plus one programmable output for high/low activation.Advanced Sensor Array Temperature Input: Monitor critical engine temperature for optimal tuning.6-Axis Inertial Platform: Captures acceleration and gyro data at 100 Hz for in-depth analysis of cornering, braking, and handling.Expandable & Versatile External Module Support: Compatible with MyChron Expansion, IR Temperature Controller, SmartyCam 3 Series, and Lambda (LCU-One/LCU1S).4 GB Onboard Memory: Ample storage for session logs and telemetry.Built to Last Rugged Body: PA6 GS30% composite construction for exceptional durability.IP67 Waterproof: Designed to withstand wet and dusty racing conditions.Compact & Lightweight: 150.0 × 79.0 × 36.6 mm, 370 g.Rechargeable Lithium Battery: Provides long-lasting power for extended track sessions.

AiM Sports MyChron 6 Digital Data Logging Dash For Kart Racing Available now! The world's #1 racing go kart data logger just got even better. Get your hands on the latest innovation in karting data logging and analysis, the AiM MyChron 6 Data Logger for racing go karts. The AiM MyChron 6 is an advanced kart data logger, specifically designed for competitive kart racers looking to analyze and enhance their performance. The MyChron 6 features improved GPS technology (compared to MyChron 5s) for precise lap timing, configurable displays for real time data logging and integrates seamlessly with Race Studio 3 software for data management. New in MyChron 6 The MyChron 6 now boasts an improved 20-hour battery life, doubling the 10-hour battery life of the MyChron 5. This allows for extended racing sessions without frequent recharges. Integrated Bluetooth for connection to smart watches to monitor heart and health vitals. Improved GPS accuracy with GPS09, further improving data collection The visual on-screen Delta Lap Timer function allows drivers to instantly view sector times and compare laps more effectively, helping refine racing lines and shave seconds off lap times. The MyChron 6 features a larger screen measuring 150 x 79 x 36.6mm, compared to the MyChron 5’s 137 x 88 x 30mm display. This wider display allows for clearer data presentation and enables an exclusive on-screen delta bar animation, which provides real time graphical feedback comparing your current lap time to your best. The USB Type-C port ensures faster downloads and rapid charging, making data transfer between the device and your laptop, phone or tablet even more efficient. Introducing the MyChron6, a cutting-edge data logger engineered specifically for karting enthusiasts. Available now, this powerful device combines advanced sensor technology, rugged construction, and a user-friendly interface to give racers at every level the ultimate performance insights. Crystal-Clear Display & LED Alerts High-Resolution LCD: 320×136-pixel, 16-level grayscale display with 8 configurable RGB backlight colors for excellent visibility.Shift Lights & Alarm LEDs: Five customizable RGB shift lights plus two alert LEDs ensure you never miss critical information.Next-Generation Connectivity Wi-Fi & Bluetooth: Seamless data transfer, firmware updates, and configuration via wireless connection. Aux CAN Connection: Allows for easy integration of additional modules and sensors. USB Port: Convenient data download, mass storage support, and battery charging.Precision Timing & Track Mapping 25 Hz GPS: Highly accurate lap timing and real-time position tracking. Built-in track database recognizes circuits automatically.Digital Inputs/Outputs: Optical and magnetic lap signal inputs, plus one programmable output for high/low activation.Advanced Sensor Array Temperature Input: Monitor critical engine temperature for optimal tuning.6-Axis Inertial Platform: Captures acceleration and gyro data at 100 Hz for in-depth analysis of cornering, braking, and handling.Expandable & Versatile External Module Support: Compatible with MyChron Expansion, IR Temperature Controller, SmartyCam 3 Series, and Lambda (LCU-One/LCU1S).4 GB Onboard Memory: Ample storage for session logs and telemetry.Built to Last Rugged Body: PA6 GS30% composite construction for exceptional durability.IP67 Waterproof: Designed to withstand wet and dusty racing conditions.Compact & Lightweight: 150.0 × 79.0 × 36.6 mm, 370 g.Rechargeable Lithium Battery: Provides long-lasting power for extended track sessions.

Sabelt Steel Saloon 4-Point Harness LOCK IN. PUSH HARDER. DRIVE WITH CONFIDENCE. You and your car are in perfect sync—the engine roars, the tires grip, and every corner becomes an opportunity to prove your skill. But when you’re pushing the limits on track day, safety isn’t optional. Enter the Sabelt Steel 4-Point Saloon Harness—your ultimate race-ready security system that keeps you locked in place, focused, and in full control. No more sliding around in your seat or bracing yourself against G-forces with your knee. This FIA 8854/98-approved harness features 3-inch-wide shoulder and lap straps that distribute force evenly, providing unparalleled support during high-speed cornering, heavy braking, and full-throttle acceleration. The pull-up lap strap adjustment ensures a perfect fit, while the snap hook fixings with removable shoulder strap options make it adaptable to your setup. And installation? A breeze. The included eye bolts keep everything locked down securely so you can focus on driving, not fidgeting with your harness. WHY YOU NEED THIS HARNESS ✅ Race-Proven Security – FIA 8854/98-approved for track use, meaning no compromises on safety✅ Unmatched Stability – Keeps you firmly in place, letting you focus on hitting every apex✅ Effortless Adjustments – Pull-up lap straps allow for quick, on-the-fly fine-tuning✅ Versatile Installation – Snap hook fixings with removable shoulder strap options for flexibility✅ Durable & Track-Ready – Engineered with high-strength materials to withstand serious driving forces SPECIFICATIONS Harness Type: 4-Point Strap Width: 3 inches (shoulder & lap) Adjustment Type: Pull-up lap strap for quick fine-tuning Fixings: Snap hook fixings with removable shoulder strap options Mounting Hardware: Includes eye bolts for secure attachment Certification: FIA 8854/98 approved FAQ: Q: Is this harness FIA-approved for racing?A: Absolutely! It meets FIA 8854/98 standards, making it fully compliant for competitive racing and track use. Q: Can I install this in my daily driver?A: While you technically can, this harness is designed for track-focused setups and not ideal for everyday street use. Q: Will it fit my seat setup?A: The snap hook fixings and removable shoulder straps offer great installation flexibility, making it compatible with most saloon-style race seats. Q: How do I adjust the harness for the best fit?A: The pull-up lap straps allow you to fine-tune the fit while seated, ensuring you’re locked in comfortably before you launch down the straightaway. THE MOMENT OF TRUTH: ARE YOU READY? Your car is built for performance—shouldn’t your safety gear match that level of precision? The Sabelt Steel 4-Point Saloon Harness ensures that every lap is as safe as it is exhilarating. Whether you’re chasing lap records or dialing in your racecraft, this harness is the upgrade you can’t afford to skip. Click "Add to Cart" now and experience total control on track!

Sabelt Porsche 996 / 997 4-Point Track Day Car Harness Lock In. Grip Tight. Unleash Performance. Your Porsche isn’t just a car—it’s an extension of your soul, a finely tuned beast that demands respect on the track. But let’s be real: power without control is just chaos waiting to happen. That’s where the Sabelt 4-Point Racing Harness comes in. It’s more than just a safety upgrade—it’s your ticket to a secure, controlled, and confidence-inspiring drive every time you hit the throttle. Strap in and feel the difference. The full 2-inch webbing hugs your body like a second skin, while the Formula B3 buckle locks you in with race-ready precision. Those yellow pull-down straps? They make adjustments a breeze, so you can dial in your perfect fit without missing a beat. And when it’s time to exit? The superlight quick-release adjusters ensure you’re out in a flash. And let’s talk style. This harness isn’t just track-day tough—it’s Porsche-perfect, rocking a sleek silver design with bold blue lap mounts that scream performance. Why You’ll Love It: Total Confidence – Secure yourself in place so you can focus on the apex, not bracing against G-forcesRace-Ready Adjustments – Fine-tune your fit effortlessly with the quick-adjust pull-down strapsBuilt for Performance – Premium P-Type steel fixing plates keep everything locked down tightPorsche-Specific Fit – Designed with your Porsche’s interior in mind—no guesswork, just a flawless installationTrack-Proven Durability – Sabelt’s racing pedigree ensures this harness stands up to serious driving conditions Specifications: Harness Type: 4-Point Webbing Width: Full 2-inch for superior support Buckle Type: Formula B3 racing buckle for ultimate security Adjustment: Yellow pull-down straps for easy fine-tuning Quick Release: Superlight quick-release adjusters for fast exits Mounting Plates: P-Type steel fixing plates for rock-solid installation Color Options: Red, Black and Blue Compatibility: Specifically engineered for Porsche models FAQs Q: Will this fit my Porsche without modifications?A: Absolutely! This harness is Porsche-specific, meaning it’s designed to fit without drilling or awkward mounting solutions. Just install and go! Q: Is this harness FIA or SFI certified?A: This harness is designed for track days and high-performance driving but is not FIA or SFI homologated. For sanctioned racing events, check your rulebook for compliance requirements. Q: Can I install this in a daily driver?A: You can, but keep in mind that 4-point harnesses are best suited for track use. They offer incredible support but may not be as convenient for everyday commuting. Q: How do I adjust the fit?A: The yellow pull-down straps make it super easy to fine-tune your fit even while seated—no struggling, no fuss. Ready to Take Your Driving Experience to the Next Level? Don’t settle for subpar safety. Whether you’re carving corners at the track or pushing limits on a spirited drive, the Sabelt 4-Point Racing Harness keeps you locked in, focused, and in total control. Get yours today and experience next-level confidence behind the wheel. ➡ Click the Buy Button Now—Your Porsche Deserves It!

Sabelt HYPER TB12 Racing Shoes – Precision Meets Performance The Ultimate Race-Ready Shoes for Drivers Who Demand More If you’ve ever wished for a perfect connection between your feet and your pedals, meet the Sabelt HYPER TB12 Racing Shoes. Engineered with precision and Italian craftsmanship, these shoes deliver unrivaled grip, lightweight agility, and all-day comfort—so you can focus on hitting apexes instead of fighting foot fatigue. Made for serious racers and track-day warriors, the HYPER TB12 is FIA-approved and packed with performance-enhancing tech. With a soft perforated leather upper, an ultrathin grip sole, and an aramidic fireproof lining, these shoes provide everything you need to dominate on the track while keeping your feet cool and secure. Why You Need These in Your Race Kit FIA 8856-2018 Homologation – Fully compliant with the latest FIA safety standards, ensuring you're track-legal and protected in case things get… spicy. Soft, Perforated Leather Upper – Italian leather that’s both buttery smooth and highly breathable, keeping your feet comfortable and sweat-free through every session. Ultrathin Grip Sole – Get that perfect pedal feel with a sole designed for maximum responsiveness. Every throttle input, every brake mod, every clutch kick—precision at your feet. Aramidic Fire-Resistant Lining – Because fire protection should never be an afterthought. These shoes are built with high-tech aramidic materials to keep you safe under pressure. Real Carbon Fiber Removable Insole – Lightweight, durable, and race-inspired, this insole delivers next-level comfort while reducing overall weight. Bonus: carbon fiber just makes everything cooler. 3D Honeycomb Lining (Sabelt Technology) – Enhanced airflow and comfort that keeps your feet cool, even when your tires are screaming for mercy. Made in Italy – Handcrafted with passion and precision, because Italians don’t mess around when it comes to motorsport. Tech Specs & Features Material: Soft, perforated leather upper for maximum comfort and breathability Sole: Ultrathin, high-grip design for the ultimate pedal feel Lining: Aramidic fire-resistant interior Insole: Removable real carbon fiber insole Inner Lining: 3D Honeycomb (Sabelt technology) for optimal airflow Homologation: FIA 8856-2018 approved Weight: Featherlight for all-day racing comfort Fit: Ergonomic shape for a snug, performance-driven fit FAQs – Answering Your Burning Questions Q: Are these shoes FIA approved?A: Yes! The HYPER TB12 meets FIA 8856-2018 standards, so you're good to go for any competitive motorsport event. Q: How do they fit?A: They’re designed for a snug, performance-driven fit. If you’re between sizes or prefer a looser feel, consider sizing up. Q: Can I use these for sim racing?A: Absolutely! While they’re built for real-world racing, their ultrathin sole makes them a killer choice for sim racers looking for maximum pedal feedback. Q: Are they comfortable for all-day wear?A: 100%! With the soft leather upper, breathable honeycomb lining, and lightweight design, they’re built for long stints on the track or in the pits. Own the Pedals, Own the Race The Sabelt HYPER TB12 Racing Shoes are more than just footwear—they're a performance upgrade for your feet. When every fraction of a second matters, you need the best gear to keep you connected to your car. Don’t settle for ordinary. Get race-proven performance with the HYPER TB12 today!   

OMP ONE-S Racing Gloves FIA 8856-2018 HOMOLOGATED Featuring freshly-redesigned graphics and the latest FIA 8856-2018 rating, OMP's restyled lightweight ONE-S Racing Gloves boast the ultra comfortable pre-curved design and external stitching that has made them one of our top sellers (and a staff favorite). Thin silicone inserts, re-engineered for better ergonomics, are printed directly onto the palm. OMP's diagonal cut gauntlet is a subtly great feature, giving the driver unobstructed performance. The strapless design uses an elastic wrist band for increased comfort and very easy on/off. OMP ONE-S AUTO RACING GLOVE CONSTRUCTION Palm has fire-retardant, silicon rubber inserts proven to give optimal grip and sensitivity. Diagonal cut on the gauntlet and elastic band on the wrists. External seams for maximum comfort. Pre-curved design for optimal comfort. Grip inserts are strategically located in order to decrease bunching. OMP ONE-S AUTO RACING GLOVE PROTECTION Certified to the new FIA 8856-2018 homologation standard. Interior is sprayed with latex for improved grip and resistance. Extended cuff length in accordance with new FIA homologation standards for maximum protection against fire and heat.