Cobra

Cobra Evolution Pro-Fit Racing Seat (Side Mounts Sold Separately) The Cobra Evolution Pro-Fit is a timeless design in side protection racing seats, still very much preferred by drivers for its open aspect, ease of use, and incredible safety. An open headrest specifically designed for HANS/FHR use ensures maximum visibility while maintaining side impact safety. The Cobra Evolution Pro-Fit features the same high-side containment shape and lateral support also found in Cobra's Suzuka Pro-Fit seat, with the addition of an integrated head restraint. The Cobra Pro-Fit range has Cobra's unique Spacer fabric which is FIA compliant and aids driver comfort and cooling. Like all Cobra competition seats, the Cobra Evolution Pro-Fit is available in Standard and GT width to suit the widest range of drivers among seats in the market today. The Diolen/GRP constructed shell makes this seat lighter and stronger than similar Fiberglass seats. All Cobra Pro-Fit seats come standard with mid-height back and lower seat cushions; you can select optional ultra low or higher cushion options to get the best possible driver comfort at no extra cost. This latest design of Cobra's Evolution is taller than before, allowing tall drivers to fit comfortably under the seat's halo protection and shoulder belt openings. The base is roughly 1.5" deeper with a more convex shape.   Cobra Evolution Pro-Fit Racing Seat FEATURES: HANS®/FHR compatible. PRO-FIT custom padding system. 4/5/6 point harness compatible. Breathable & cooling Spacer fabric. Deep-sided lateral protection. Integrated lateral head protection. Dual-width options, Standard or GT (+30mm) Side-mount only1 (supplied with high tensile bolts). Cobra Evolution Pro-Fit Racing Seat SPECS: FIA homologated to 8855-1999. Composite Diolen®/GRP construction. Weight: 20 lbs. (Standard) / 21 lbs. (GT) Note 1: side mounts (pictured) are available separately in the dropdown above.

Cobra Imola Pro-Fit Racing Seat (Side Mounts Sold Separately) The Cobra Imola Pro-Fit Seat is the most cost effective way to take advantage of Cobra's well earned reputation for safety and quality. The  Cobra Imola Pro-Fit makes no compromises in its construction and remains one of the strongest and lightest seats in its class. The Cobra Pro-Fit range has Cobra's unique Spacer fabric which is FIA-compliant while adding to driver comfort and cooling. Like all Cobra competition seats, the Cobra Imola Pro-Fit is available in Standard and GT width to suit the widest range of drivers among seats on the market today. The low sides on the Cobra Imola Pro-Fit make it a great choice for dual duty track/street cars. As with all Cobra Seats, the Cobra Imola is fully HANS/FHR compatible. The Diolen/GRP constructed shell makes this seat lighter and stronger than similar Fiberglass seats in the market place. All Cobra Pro-Fit seats come standard with a mid-height back and lower seat cushions, and have optional ultra low or higher cushion available so you can dial in driver comfort. Recently redesigned with higher shoulder openings to allow taller drivers to use this seat. Cobra Imola Pro Fit Seat - Standard Width Details:Manufacturer: CobraManufacturer part number: IMOLA-PF-STDHANS®/FHR compatiblePRO-FIT custom padding system4/5/6 point harness facilityBreathable & cooling spacer fabricColor options black, red, blue, greyDual width options standard or GT (+30mm)Side mounted only supplied with high tensile bolts   Cobra Imola Pro Fit Seat FEATURES: HANS®/FHR compatible. PRO-FIT custom padding system. 4/5/6 point harness compatible. Breathable & cooling Spacer fabric. Dual width option: Standard or GT (+30mm). Side-mount only1 (supplied with high tensile bolts). Cobra Imola Pro Fit Seat SPECS: FIA homologated to 8855-1999. Composite Diolen®/GRP construction. Weight: 15lbs. (Standard) / 17lbs. (GT). Note 1: side mounts (pictured) are not included, available separately in dropdown above.

Cobra Nogaro Sports Seat (Side Mounts Sold Separately) The Cobra Nogaro has been designed from a clean sheet of paper to appeal to owners of a wide variety of sports, classic and GT cars. Although it is built to Cobra exacting motorsport standards, this is a seat that is designed to be as much at home running kids to school as it is on the Nordschleife. Despite being very supportive, the design has been carefully balanced to ensure long distance touring comfort and easy entry and egress. To this end, the seat shell is carefully sculpted to hold the shoulders and hips, but with lower profile side bolsters on the base to allow quick and easy entry. Two shell options are available to suit all tastes and budgets. Choose from either the GRP (glass-reinforced plastic, lighter than traditional fiberglass) version at a scant 22.4 lbs or the featherweight carbon fiber variant at an unbelievable 11.7 lbs! No matter what OEM seat you are running, these will save an incredible amount of weight over the factory seats.     The Nogaro can also be ordered in two styles: "Street" looks right at home in anything from a fully sorted Audi to a highly modified Porsche; "Circuit" offers the same good looks, but with the added benefit of harness slots for those heading out for the occassional track day. Better still, the Nogaro's side profile has been carefully optimized to work perfectly with all factory seatbelt systems and side curtain airbags. When placing your order, if you select the custom Leather or Alcantara trim option, we will contact you to discuss the specifics of the combination you want. SIDE MOUNT OPTIONS: Low Profile: Designed specifically for the Cobra Nogaro Seat, the SUBFR31 side plates are designed to help the Nogaro site slightly lower than traditional side plates. Porsche drivers: Cobra has the ultimate seat bracket, made specifically for Porsche models. This Porsche side plate allows you to bolt your Cobra Nogaro seat direct to the factory manual OE Porsche sliders.   Note: low-profile and Porsche side mounts (pictured) are not included, but are available separately in the dropdown above.

Cobra Sebring Pro-Fit Racing Seat (Side Mounts Sold Separately) The Cobra Sebring Pro-Fit is a world-class professional competition seat that is one of the safest and ergonomically correct seats available in the market. The Sebring Pro-Fit is incredibly rigid but is still the lightest seat in its class. The shoulders and head restraint areas are engineered for drivers up to 6' 2" while retaining the correct geometry between your shoulders, side-head restraints and harness slots for full functioning of a HANS/FHR device. The Pro-Fit range has Cobra's unique Spacer fabric which is FIA compliant and aids driver comfort and cooling. Like all Cobra competition seats, the Sebring Pro-Fit is available in Standard and GT (+30mm) width to suit the broadest range of drivers. Designed by professional drivers for professional drivers, the Sebring Pro-Fit is the ultimate in safety, comfort and control. The Diolen/GRP constructed shell makes this seat lighter and stronger than similar Fiberglass seats. All Cobra Pro-Fit seats come standard with mid-height back and lower seat cushions, but you can choose between optional ultra low or higher cushions to dial in the best possible driver comfort.The Sebring Pro-Fit Race Seat in Standard Width is a world-class professional competition seat that is one of the safest and ergonomically correct seats available in the market. The Sebring Pro-Fit is incredibly rigid but is still the lightest seat in its class. Cobra Sebring Pro Fit Seat - Standard Width Details:Manufacturer: CobraManufacturer part number: SEBRING-PF-STDColor: BlackSide mounts included: NoHans® compatiblePRO-FIT custom padding system4/5/6 point harness facilityBreathable & cooling spacer fabricSuede-Tec wear patchesColour options blackStandard Width is 30mm more narrow than GTSide mounted onlySupplied with high tensile boltsFIA 8855-1999 approved The Cobra Sebring Pro Fit shoulders and head restraint areas of the Cobra Sebring Pro-Fit is engineered for the tallest of drivers (up to 6ft 2in) while still retaining the correct geometry between shoulders, side head restraints and harness slots for full functioning of a HANS® device. The Pro-Fit range has Cobra's unique Spacer fabric which is FIA compliant and aids driver comfort and cooling.     Cobra Sebring Pro-Fit Racing Seat  FEATURES: HANS®/FHR compatible. PRO-FIT custom padding system. 4/5/6 point harness compatible. Breathable & cooling Spacer fabric. Deep-sided lateral protection. Integrated lateral head protection. Dual width option: Standard or GT (+30mm) Side-mount only1 (supplied with high tensile bolts). Cobra Sebring Pro-Fit Racing Seat SPECS: FIA homologated to 8855-1999. Composite Diolen®/GRP construction. Weight: 20 lbs. (Standard) / 21 lbs. (GT). Note 1: side mounts (pictured) are not included, available separately in dropdown above.

Cobra Suzuka Pro-Fit Racing Seat (Side Mounts Sold Separately) The Suzuka Pro-Fit Racing Seat is Cobra's best selling and most accomplished all round model. The Pro-Fit range has Cobra's unique fabric which is FIA compliant and aids driver comfort and cooling. Like all Cobra competition seats, the Suzuka Pro-Fit is available in Standard and GT width to suit the widest range of drivers. The Suzuka is known as one of the most comfortable seats in the industry. Still the preferred choice of many in all forms of motorsport, the Suzuka is an incredibly safe, deep sided and extremely rigid seat that still allows freedom of movement the race car. High backed, fully HANS/FHR compatible with increased kidney protection, but relieved below the shoulders for lateral arm movement, the Suzuka Pro-Fit allows the driver to get great leverage on the steering wheel. The Diolen/GRP constructed shell makes this seat lighter and stronger than similar Fiberglass seats. All Cobra Pro-Fit seats come standard with mid-height back and lower seat cushions and have optional ultra low or higher cushions to dial in the best possible driver comfort. Recently redesigned with higher shoulder openings to allow taller drivers to use this seat.   Suzuka Pro-Fit Racing Seat FEATURES: HANS®/FHR compatible. PRO-FIT custom padding system. 4/5/6 point harness compatible. Breathable & cooling fabric. Deep-sided lateral protection. Dual width option: Standard or GT (+30mm). Side-mount only1 (supplied with high tensile bolts). Suzuka Pro-Fit Racing Seat SPECS: FIA homologated to 8855-1999. Composite Diolen®/GRP construction. Weight: 17lbs. (Standard) / 19lbs. (GT). Note 1: side mounts (pictured) are not included, available separately in the dropdown above.