Seat Accessories

CMS Performance Sub Strap Mount for Corvette C8 This Mount Fits All Variants of the Following Cars: Chevrolet Corvette C8  Chevrolet Corvette C8 Z51 Chevrolet Corvette C8 Z06 Chevrolet Corvette C8 ZR-1 The Best Way to Mount Harness Lap and Sub Belts in Your C8 Corvette The CMS Performance Sub Strap Mount is designed to be installed and used with your factory seats, giving you strong, secure mounting points for racing harness sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap Mount provides an extremely strong structure to which you can wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap Mount Details Manufacturer: CMS Performance Manufacturer Part Number: Harninstall-C8 Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

CMS Performance Sub Strap + Lap Belt Mount for Toyota GR Supra/GR86 This Mount Fits All Variants of the Following Cars: Toyota GR Supra A90/A91 (2019+) Toyota GR86 (2021+) The Best Way to Mount Harness Lap and Sub Belts in Your GR Supra or GR86 The CMS Performance Sub Strap + Lap Belt Mount is designed to be installed and used with your factory Toyota seats, giving you strong, secure mounting points for racing harness lap- and sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original seat mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap + Lap Belt Mount provides an extremely strong structure to which you can clip or bolt your harness lap belts and wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap + Lap Belt Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap + Lap Belt Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap + Lap Belt Mount Details: Manufacturer: CMS Performance Manufacturer part no.: CMS-SL-005 Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

CMS Performance Sub Strap + Lap Belt Mount for GT350/GT350R/S550 This Mount Fits All Variants of the Following Cars: Ford Performance Shelby GT350 (2015-2020) Ford Performance Shelby GT350R (2016-2020) Ford Performance Shelby GT500 (2021+) Ford S550 Mustang GT (2015-2023) The Best Way to Mount Harness Lap and Sub Belts in Your Shelby Mustang The CMS Performance Sub Strap + Lap Belt Mount is designed to be installed and used with your factory Ford Performance seats, giving you strong, secure mounting points for racing harness lap- and sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original Ford mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap + Lap Belt Mount provides an extremely strong structure to which you can clip or bolt your harness lap belts and wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap + Lap Belt Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap + Lap Belt Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap + Lap Belt Mount Details: Manufacturer: CMS Performance Manufacturer part no.: CMS-SL-003 Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

CMS Performance Sub Strap + Lap Belt Mount for BMW This Mount Fits All Sub-Models Of Current BMW Cars The Best Way to Mount Harness Lap and Sub Belts in Your BMW  The CMS Performance Sub Strap + Lap Belt Mount is designed to be installed and used with your factory BMW seats, giving you strong, secure mounting points for your racing harness lap- and sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original BMW mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap + Lap Belt Mount provides an extremely strong structure to which you can clip or bolt your harness lap belts and wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap + Lap Belt Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap + Lap Belt Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap + Lap Belt Mount for BMW Details: Manufacturer: CMS Performance Manufacturer part no.: CMSP-SS-BLACK-BMW Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

Recaro Sportster GT/CS/Cross Slider Track Kit Refined Elegance Matched With High Performance These Recaro seat sliders allow you to position your Recaro Sportster GT, CS, or Cross seat for the ultimate driving experience. These sliders come without tabs and have an inside-mounted adjustment bar. They are not are FIA certified for racing. The Recaro Sportster GT/CS/Cross Slider Track Kit is made in Germany from steel and black powder-coated for added durability. Recaro Sportster GT/CS/Cross Slider Track Kit Features Universal fit Kit includes inside adjuster bar without tabs Fits Recaro Sportster GT, Sportster CS, and Cross Sportster CS seats

Sparco 90 Aluminum Seat Side Mount Brackets Sparco 90o aluminum side mounts are used to mount competition seats. Side mounts have mutliple side holes that provide a customizable mounting position. All-aluminum construction available in powder coated black only. The 90o aluminum side mount is ideal for vehicle applications that have limited room for seat mounting. The smaller footprint allows for more mounting options. FEATURES Powder coated for superior protection Weight 2.5 lbs per set

OMP 36-Hole Racing Seat Brackets New OMP racing seat brackets feature a 36-hole design to accommodate an incredibly wide range of seat mounting configurations. OMP's high-strength 6 mm aluminum construction complies with FIA Appendix J article 253, approved for competition use. They are designed to work seamlessly with OMP Racing Seats, and will fit many other seats with 11.4 in. (289 mm) side-mounting hole spacing (e.g., Sparco seats). The multi-hole design allows for up to 36 different seat mounting positions. Black anodized for excellent durability.

Sparco Adjustable Steel Side Mount Seat Brackets Sparco steel side mounting frames with separate adjustable side plates offer the ultimate adjustability. The main pressed steel rails are 580mm long to enable multiple mounting positions for greater adapatability both for the seat and proper fitment to the vehicle. The multi-drilled design guarantees the correct driving position while ensuring complete safety and ease of fitting. The lightweight medium height bracket design is suitable for all Sparco side mounted motorsport and performance road seats. The Sparco Adjustable Steel Side Mount is FIA certified.

CMS Performance Harness Install Kit For Gen 6 Camaro This Product Fits The Following Cars: Chevrolet Camaro Coupe, all (2016+) Quick, Easy Installation of Harness Lap Belts in the Gen 6 Camaro The CMS Performance Harness Install Kit for the Gen 6 Camaro provides two strong, secure anchors for the lap belts of your racing harness using the factory seats of your Gen 6 Camaro. Each CMS Performance Gen 6 Camaro Harness Install Kit is for one seat (driver or passenger side, the kit works on either seat). Ordering two kits saves you $25 overall and you can install a harness for your passenger or instructor. CMS Performance is 100% Designed and Built in the USA All CMS Performance products are designed, constructed, and finished in our USA manufacturing and powder coating facility. The CMS Performance Gen 6 Camaro Harness Install Kit is CNC cut and fully TIG-welded from high-strength stainless steel, then powder coated a rich satin black to blend seamlessly into your interior when you don't have harnesses installed. Complete detailed instructions make installation straightforward (figure about an hour if you're reasonably handy). Click here for installation instructions. For the Gen 6 Camaro, we recommend the Schroth Profi II ASM or Sabelt Steel Series four-point harnesses for use with this kit. Schroth's proprietary Anti-Submarine (ASM) technology was developed specifically for use in street cars like the Gen 6 Camaro without a sub strap a pass-through in the seats. Sabelt's four point Steel Series offers an alternative that gives you a significant safety upgrade at a reasonable price! CMS Performance Harness Install Kit Details: Manufacturer: CMS Performance manufacturer Part: Harninstall-G6C Construction: 360o TIG welded stainless steel Finish: Satin black powder coat Designed, manufactured, and powder coated by CMS Performance in the USA This product is intended for off-road use only.

CMS Performance Harness Install Kit For C7 Corvette This Product Fits The Following Cars: Chevrolet Corvette Stingray & Z51, C7 (2014-2019) Chevrolet Corvette Z06, C7 (2015-2019) Quick and Easy Installation of Harness Lap Belts in the C7 Corvette The CMS Performance Harness Install Kit for the C7 Corvette provides two strong, secure anchors for the lap belts of your racing harness using the factory seats of your C7 Corvette. Each CMS Performance C7 Corvette Harness Install Kit is for one seat (driver or passenger side, the kit works on either seat). Ordering two kits saves you $25 overall and you can install a harness for your passenger or instructor. CMS Performance is 100% Designed and Built in the USA All CMS Performance products are designed, constructed, and finished in our USA manufacturing and powder coating facility. The CMS Performance C7 Corvette Harness Install Kit is CNC cut and fully TIG-welded from high-strength stainless steel, then powder coated a rich satin black to blend seamlessly into your interior when you don't have harnesses installed. Complete detailed instructions make installation straightforward (figure about an hour if you're reasonably handy). Click here for installation instructions. For the C7 Corvette, we recommend the Schroth Profi II ASM or Sabelt Steel Series four-point harnesses for use with this kit. Schroth's proprietary Anti-Submarine (ASM) technology was developed specifically for use in street cars like the C7 Corvette without a sub strap a pass-through in the seats. Sabelt's four point Steel Series offers an alternative that gives you a significant safety upgrade at a reasonable price! CMS Performance Harness Install Kit Details: Manufacturer: CMS Performance manufacturer Part: Harninstall-C7 Construction: 360o TIG welded stainless steel Finish: Satin black powder coat Designed, manufactured, and powder coated by CMS Performance in the USA This product is intended for off-road use only.

CMS Performance Harness Install Kit For C8 Corvette This Product Fits The Following Cars: Chevrolet Corvette Stingray & Z51, C8 (2020+) Chevrolet Corvette Z06, C8 (2023+) Quick and Easy Installation of Harness Lap Belts in the C8 Corvette The CMS Performance Harness Install Kit for the C8 Corvette provides two strong, secure anchors for the lap belts of your racing harness using the factory seats of your C8 Corvette. The kit is typically used along with the CMS Performance C8 Harness Bar or Deluxe C8 Harness Bar. Together they give C8 Corvette driving enthusiasts an elegant, secure way to use a racing harness. Each CMS Performance C8 Corvette Harness Install Kit is for one seat (driver or passenger side, the kit works on either seat). Ordering two kits now, you save $25 and you can install a harness for your passenger or instructor. CMS Performance is 100% Designed and Built in the USA All CMS Performance products are designed, constructed, and finished in our USA manufacturing and powder coating facility. The CMS Performance C8 Corvette Harness Install Kit is CNC cut and fully TIG-welded from high-strength stainless steel, then powder coated a rich satin black to blend seamlessly into your interior when you don't have harnesses installed. Complete detailed instructions make installation straightforward (figure about an hour if you're reasonably handy). Click here for installation instructions. For the C8 Corvette, we recommend the Schroth Profi II ASM Harness for use with this kit. Schroth's proprietary Anti-Submarine (ASM) technology was developed specifically for use in street cars like the C8 Corvette that don't have a pass-through in the seat cushions to accommodate the sub straps of a six-point racing harness. CMS Performance Harness Install Kit Details: Manufacturer: CMS Performance manufacturer Part: Harninstall-C8 Construction: 360o TIG welded stainless steel Finish: Satin black powder coat Designed, built, and powder coated in the USA This product is intended for off-road use only.

Racetech Aluminum Side Mounting Brackets RTB1005M Side-Mount Brackets: Racetech milled aluminum bracket set for side-mounting seats. 5mm thick 5083 aluminum alloy. Sold as a pair. Fit the following seat models: RT1000 RT4000W (discontinued) RT4000WX (discontinued) RTSaker (with modification) RTRoad RTRoadW (discontinued) RT4000WLB RT4000WXLB RT1000LBHG RTB1009M Side-Mount Brackets: Mill-finished 5mm 5083 aluminum alloy brackets for side-mounting seats. Five slots and five holes provide plenty of height and tilt adjustment. Sold as a pair. These brackets are suitable for use with the following seat Racetech models: RT4009, RT4009W RT4009HR, RT4009THR, RT4009WHR, RT4009WTHR RT4100, RT4100WT, RT4100HR, RT4100WTHR RT9009, RT9009HR RT4119HRW, RT4119THR, RT4119WHR, RT4119WTHR RT9119HR, RT9119THR, RT9119WTHR RT4129HRW, RT4129WHR, RT4129WTHR RT9129HRW, RT9129THR, RT9129WHR, RT9129WTHRL Hole Spacing (Seat): Nominal: 295mm Minimum: 290mm Maximum: 300mm

Racetech Steel Side Mounting Brackets Racetech RTB2009S satin black powder coated 3mm steel brackets for side mounting seats. Sold as a pair. Alongside the Racetech 4100-Series seats, they have developed a classy but affordable new bracket set. A staggered hole-and-slot pattern allows fine adjustments for the optimal seating position. Slots in the foot of each bracket also allow a little more lateral tolerance during installation. Use With These Racetech Seats: RT4009, RT4009W RT4009HR, RT4009WHR, RT4009WTHR RT4100, RT4100WT, RT4100HR, RT4100WTHR RT4119HRW, RT4119THR, RT4119WHR, RT4119WTHR RT9119HRW, RT9119THR, RT9119WHR, RT9119WTHR Hole Spacing (Seat): Nominal: 295mm Minimum: 290mm Maximum: 300mm

Racetech RTB2115B Seat Back Brace The Racetech RTB2115B bracket for back-mounting seats is made from 5mm 5083 aluminium. This bracket bolts to the shoulder beam of Racetech 119-Series racing seats and works in conjunction with RTB2005C clamps. This allows you to fix the seat to a lateral/diagonal roll cage tube. Requires four holes to be drilled to bolt on the clamps once you have your racing seat set-up in the optimum driving position. COMPATIBLE RACETECH RACING SEATS: RT4119HRW RT4119THR RT4119WHR RT4119WTHR RT9119HR RT9119THR RT9119WHR RT9119WTHR

Racetech RTB1006B Seat Back Brace Racetech RTB1006B (standard size) and RTB1006BW (wide size) 6mm aluminium brackets for back-mounting seats. To meet FIA 8862-2009, one of these brackets must be used with Racetech 129-Series seats to attach the seat to the roll cage at shoulder height. Standard size (RTB1006B) compatible with: RT4129HRW RT9129HRW RT9129THR Wide size (RTB1006BW) compatible with: RT4129WTHR RT4129WHR RT9129WHR RT9129WTHR

OMP Racing Seat Slider Easily adjust your racing seat to the optimal position with an OMP racing seat slider. OMP seat sliders are best for any OMP seat application. They're designed to allow the driver to adjust the seat position with precision, giving you a position that's completely custom to you. OMP seat slider sets employ a double locking mechanism for increased safety. Not FIA Approved