Sabelt Seat Slider
Sabelt Sabelt Seat Slider $85.00
Sabelt Seat Slider These seat sliders are recommended for any seat application and allow you to adjust the seat position. The seat tracks employ a double locking mechanisim for increased safety. Features double-locking mechanism for increased safety.
Sabelt Steel Side Mount Brackets
Sabelt Sabelt Steel Side Mount Brackets $85.00
Sabelt Steel Side Mount Brackets For use mounting most side mount racing seats. FEATURES:  3mm thick  FIA compliant  Standard length  290mm (11.42-inch) bolt pattern  Painted Black
Sparco Track Set Seat Slider
Sparco Sparco Track Set Seat Slider $85.00
Sparco Track Set Seat Slider The Sparco track set -- also known as seat sliders -- are recommended for any seat application. This seat track set allows you to adjust the seat position fore and aft for a customized, comfortable cockpit. Sparco seat tracks employ a double locking mechanisim for increased safety.
Sparco Side Mount Brackets: Steel
Sparco Sparco Side Mount Brackets: Steel $85.00
Sparco Steel Side Mount Seat Brackets These Sparco steel side mount seat brackets have mutliple holes that provide a customizable mounting position. FEATURES Powder coated steel in black Weight - 5lbs per set
OMP Side Mount Brackets
OMP OMP Side Mount Brackets from $85.00
OMP Racing Seat Side Mount Brackets New ultra-strong material. FIA approved. Choose from the following styles: TALL STEEL MOUNTS: Length: 380.0mm Thickness: 3.0mm LOW STEEL MOUNTS: Length: 350.0mm Thickness: 3.0mm
Racetech Zinc-Plated Steel Side Mount Brackets
Racetech Racetech Zinc-Plated Steel Side Mount Brackets $69.99
Racetech Zinc-Plated Steel Side Mount Brackets Racetech zinc-plated, 3mm steel brackets for side-mounting seats. Sold as a pair. These brackets are suitable for use with the following seat models: RT1000 RT4000W (discontinued) RT4000WX (discontinued) RTSaker (with modification) RTRoad RTRoadW (discontinued) RT4000WLB RT4000WXLB RT1000LBHG
Sabelt Seat Pads
Sabelt Sabelt Seat Pads $69.00
Sabelt Seat Pads Additional seat pads for further customizing the fit and comfort of your Sabelt racing seat. Choose lumbar support, back support, or both.
Schroth B23A Bendable Harness Snap End Kit
Schroth Schroth B23A Bendable Harness Snap End Kit $24.95
Schroth B23A Bendable Harness Snap End Kit Schroth B23A harness ends are bendable and make racing harnesses easier where there is very little clearance. The Schroth B23A bendable snap-on harness adapter lets you bolt one end to the chassis, bend it to the needed shape, and attach your harness snap end. Schroth B23A Bendable Harness Snap End Kit Details: Manufacturer: Schroth Manufacturer part number: B23A Manufacturer alternate part number: SR 01324 Bendable Fittings: Yes (2) Bolts: Yes (2) 7/16-24 Wavy Washers: Yes (2) Combination Washers: Yes (2) The B23A End Fitting Kit is a set of bolt in brackets that are usually sewn into 2" Lap belts. Schroth slang calls it a "Rallye End" kit because it usually comes on the street legal Rallye style belts. Like the 01323 kit, it is designed to be bent. These pieces are commonly used in Porsche applications where space for an Eye bolt is insufficient. This bracket can be bolted to the car, then bent so that a Snap-In bracket can be used to fix the harness to the bracket. We use Schroth B23A brackets in many applications where stock mounting locations do not leave sufficient space, or if the thread pitch is different from the eye bolts. If you have a Miata, S2000 or are putting a large/very large seat in a full interior car this is the harness mount kit you want.
Schroth Harness Adjuster Grips
Schroth Schroth Harness Adjuster Grips $17.95
Schroth Harness Adjuster Grips Schroth's street legal harnesses have loops sewn into the end of each adjusting strap. Schroth Harness Adjuster Grips are customized high-impact plastic dowels that go through those loops, giving you a firmer grip when adjusting the belts. This is especially an advantage when temperatures are high and hands get sweaty, or when you're wearing racing gloves. Schroth Harness Adjuster Grips make it easier to get your harness belts as tight as they should be. Priced/sold as a set of four, enough for one street legal harness. SCHROTH HARNESS ADJUSTER GRIP DETAILS Manufacturer: Schroth Manufacturer part number:00092 Material: high-impact plastic Color: black Contents: four harness adjuster grips Harness not included.
Seat Mounting Hardware Kit
Sparco Seat Mounting Hardware Kit $15.00
Discovery Parts Seat Mounting Hardware Kit (4) 8x1.25 25mm Bolts (4) 8x1.25 16mm Bolts (4) 8x1.25 Locking Nuts (8) Washers Sparco Part Numbers: 50001 and 50002 - everything you need in one place!
Schroth Reinforcement Plates M10
Schroth Schroth Reinforcement Plates M10 $12.50
Schroth Reinforcement Plates M10 Schrtoth SG55 reinforcement plates, also called back-up plates by many chassis builders, are used when reinforcing a harness mount point when the location has not been engineered by the auto manufacturer. Any time you mount a harness to sheet metal, you will need to put a reinforcement plate under it to keep it from ripping out of the floor. Schroth Racing SG55 Reinforcement Plate Details: Manufacturer: Schroth Manufacturer part number: SG55 Length: 3.25" Width: 2" Welded Nut Size/Pitch: M10 Finish: Zinc Plated Material: Steel Quantity in kit: 1 Schroth M8 Reinforcement Back-Up Plates make for a perfect harness install. This Schroth back-up plate measures 3.25" long x 2" wide with a M10 nut welded to it. This is what comes with most Schroth harness sets to mount your harness eye bolt to. This back-up plate is what comes standard issue with most Schroth Racing Harness kits
Schroth Reinforcement Plates M8
Schroth Schroth Reinforcement Plates M8 $12.50
Schroth Reinforcement Plates M8 Schrtoth SG54 reinforcement plates, also called back-up plates by many chassis builders, are used when reinforcing a harness mount point when the location has not been engineered by the auto manufacturer. Any time you mount a harness to sheet metal, you will need to put a reinforcement plate under it to keep it from ripping out of the floor. Schroth Racing SG39 Reinforcement Plate Details: Manufacturer: Schroth Manufacturer part number: SG54 Length: 3.25" Width: 2" Welded Nut Size/Pitch: M8 Finish: Zinc Plated Material: Steel Quantity in kit: 1 Schroth M8 Reinforcement Back-Up Plates make for a perfect harness install. This Schroth back-up plate measures 3.25" long x 2" wide with a M8 nut welded to it. This is what comes with most Schroth harness sets to mount your harness eye bolt to. This back-up plate is what comes standard issue with most Schroth Racing Harness kits
Schroth Reinforcement Plates 7/16
Schroth Schroth Reinforcement Plates 7/16" x 20TPI $12.50
Schroth Reinforcement Plates 7/16" x 20TPI Schrtoth SG39 reinforcement plates, also called back-up plates by many chassis builders, are used when reinforcing a harness mount point when the location has not been engineered by the auto manufacturer. Any time you mount a harness to sheet metal, you will need to put a reinforcement plate under it to keep it from ripping out of the floor. Schroth Racing SG39 Reinforcement Plate Details: Manufacturer: Schroth Manufacturer part number: SG39 Length: 3.25" Width: 2" Welded Nut Size/Pitch: 7/16 x 20TPI Finish: Zinc Plated Material: Steel Quantity in kit: 1 Schroth 7/16" x 20TPI Reinforcement Back-Up Plates make for a perfect harness install. This Schroth back-up plate measures 3.25" long x 2" wide with a 7/16 x 20 TPI nut welded to it. This is what comes with most Schroth harness sets to mount your harness eye bolt to. This back-up plate is what comes standard issue with most Schroth Racing Harness kits
Sold out
OMP - EYE BOLT PLATE (DB4186)
OMP OMP - EYE BOLT PLATE (DB4186) $12.50
Seat belt plate with threaded 7/16 nut ready to be welded to the chassis. Complying with FIA. MEASURES50x80x3 mm
OMP - EYE BOLT (DB4206)
OMP OMP - EYE BOLT (DB4206) $9.95
7/16" eye bolt to attach harness snap-hook fittings.