$100 and less

Longacre Deluxe Tire Gauge - 2.5" - 0-40 psi by 1/2 LB The Longacre Deluxe 2.5" Tire Gauge 0-40 psi by 1/2 lb keeps the highest value race cars at the front of the pack. The Longacre Deluxe 52-52013 is a large faced, 2.5" glow in the dark tire gauge with 1/2 lb accuracy and is a track side favorite with many teams from ChampCar to IMSA. Longacre 0-40 psi Deluxe Gauge Features: Manufacturer: Longacre Manufacturer part number: 52013 Gauge Face Size: 2 1/2" Pressure Range: 0 - 40 psi Dial Increments: 1/2 lb Accuracy: 2% Bleed off: Yes Holds Pressure: Yes Includes both angle and ball chucks: Yes Hose Length: 17" Internal damper: Yes

Longacre Magnum 3" GID Tire Gauge 0-60 by 1/2 lb The Longacre Magnum 3" Tire Gauge 0-60psi by 1/2 lb keeps the highest value race cars at the front of the pack. Longacre Magnum 3" 0-60 psi Tire Gauge Details: Manufacturer: Longacre Manufacturer part number: 52001 Huge 3 1/2" Glow-in-the-Dark face for high accuracy and the easiest readability Dual bleed buttons for faster setting 1/2 lb increments with 2% accuracy Swivel angle chuck installed with alternate ball chuck included Holds pressure until released Internal gauge damper for more consistent, accurate readings Flexible 17" red hose Comes with silver case The Longacre Magnum 52001 is a large faced, 3" glow in the dark tire gauge with 2% accuracy and is a track side favorite with many teams from ChampCar to SRO.

Longacre Toe-In Plates with Magnets The Longacre 52-79501 Toe-In Plates use magnets to hold the far end of the tape measure securely while you read the close-end measurement. Simple and easy to store in the spares kit, Longacre toe plates are a trackside must have. Longacre Toe Plates keep the highest value race cars at the front of the pack. Longacre Toe-In Plates with Magnets (pair) is a track side favorite with many teams from ChampCar to Grand-Am. Longacre Toe Plates with Magnets Details: Manufacturer: Longacre Racing Manufacturer Part Number: 52-79501 Quickest and simplest way to measure toe-in Rest one of these plates against the tire on each side and measure toe directly using the 2 tapes (included) Formed design is rigid for accuracy and stays put against the tire Magnets hold tape in place Dimensions: 23 1/2" x 9" [img-5557-left-large_default] How to use Longacre Toe Plates: This is a fast way to check / set front end toe. It is affected by wheel or tire runout. Be certain wheels run true and tires have no bulges. Turn wheels to straight ahead: Should be done on level ground. Set caster & camber first. Lean plates up against wheels: Folded lip goes to the outside. Be sure the entire plate is up against the wheel. Measure front width, then rear: Use the slots for the tape measure. Subtract one from the other for toe. Larger front width means toe-out. [img-2164-left-large_default]

Longacre Complete Drink Kit - 1.75" Complete Longacre Drink kit for 1.75" roll bar. This complete Longacre Drink Holder & insulated bottle with extra length drink hose & bite valve keep you hydrated during those hot summer or long races. Longacre Complete Drink Kit 1.75" Details: Manufacturer: Longacre Manufacturer Part Number: 22551 Large capacity(42oz) double insulated bottle with tube Includes "bite valve" to avoid leaks from tube Bolts onto your roll bar - no welding required (choose size above) Lightweight powder coated aluminum Longacre Part Number: 22551 Roll Bar Diameter Mount Clamp: 1.75"

Longacre Complete Drink Kit 1.5" Complete Longacre Drink kit for 1.5" roll bar. This complete Longacre Drink Holder & insulated bottle with extra length drink hose & bite valve keep you hydrated during those hot summer or long races. Details: Large capacity(42oz) double insulated bottle with tube Includes "bite valve" to avoid leaks from tube Bolts onto your roll bar - no welding required (choose size above) Lightweight powder coated aluminum Longacre Part Number: 52-22553 Roll Bar Diameter Mount Clamp: 1.5"

AeroCatch 120 Series Flush Mount Hood Pins These 120 Series Hood Pins By AeroCatch Grace The Fastest Racecars On The Planet. From Spec Miata to Daytona Prototype, AeroCatch Hood Pins Are On Every Racetrack Every Weekend. AeroCatch 120 Series Flush Mount Hood Pins Details: Manufacturer: Aerocatch Manufacturer Part Number: 120-2000 Hood Pin Length: 4.961" Hood Pin Style: Flush Mount Hood Pin Body Finish: Black AeroCatch 120 Series Plus flush mount hood pin kits are lightweight, high strength, glass-reinforced thermoplastic housings that contain a hinged, spring-loaded stainless steel pin. The stainless steel pin engages with the included aluminum hood pin for a secure fit. These compact, aerodynamic assemblies are the perfect modern replacements for conventional hood pins, door latches, and more. The 120 series are designed to be fitted from above the panel and are provided with a cardboard template for the proper cutting and drilling dimensions. The hood pins kits include two thermal plastic AeroCatch bodies, two nut fixing plates, two red aluminum strikes, two rubber bump stops, fastener kit, and arrow sticker set. Keep your hood, trunk, tailgate, or bonnet shut at high speeds with a set of these AeroCatch 120 Series plus flush mount hood pins The AeroCatch bodies are made of thermal plastic, while the hood pins are made of aluminum. These hood pin kits are are designed to be fitted from above the panel. This is the drop in from top series that is easiest to install, this is the #1 part number in AeroCatch Hood Pin sales.

Longacre Spot Mirror Clamp On 1.5" Longacre Adjustable Bolt On Spot Mirror For A 1.5" Roll Bar. Aluminum mirror housing and billet aluminum bracket. Longacre Spot Mirror Clamp On 1.5" Details: Manufacturer: Longacre Manufacturer part number: 52-22549 3 3/4" Spot Mirror with bracket for 1 1/2" roll bar Mounts on driver's side or passenger's side Adjusts easily Bolts in place solidly 3 3/4" Mirror Diameter - Convex Bracket - Machined Billet Aluminum

Longacre Mirror Brackets - Short- 1.75" (set of 2) Longacre Short Mirror Brackets for 1 3/4" Roll Bars. Now you can mount your mirror or any accessory easily to your 1.75" roll bar with the Longacre Mirror Bracket. Longacre Mirror Brackets - Short- 1.75" (Set of 2) Details: Manufacturer: Longacre Racing Manufacturer Part Number: 52-22538 Material: CNC Machined Billet Aluminum Finish: Black Anodized Mount Diameter: 1.75" No welding - bolts to your roll bars Brackets adjust from 1/2" to 2 1/2" Brackets CNC machined from billet aluminum Includes 2 brackets

Longacre 0-60 by ½ lb Liquid Filled 2½” Tire Gauge The Longacre 52-52002 Liquid Filled 2½” GID Tire Gauge 0-60 by ½ lb keeps the highest value racecars at the front of the pack. Longacre Liquid Filled 2½” GID Tire Gauge 0-60 by ½ lb is a trackside favorite with many teams from ChampCar to IMSA. Longacre 0-60 by ½ lb Liquid Filled 2½” Tire Gauge Details: Manufacturer: Longacre Manufacturer part number: 52-52002 2 1/2" Deluxe Gauge with protective bumper 1/2 lb. increments with 2% accuracy 17" hose with swivel angle chuck installed with alternate ball chuck included Holds pressure until released Glow-in-the-Dark dial face Specially designed vent valve to equalize pressure and maintain gauge accuracy Liquid Filled Tire Pressure Gauges ALL liquid filled gauges are purposely filled to just 80%. The remaining 20% air pocket helps allow for thermal expansion and contraction as ambient temperature changes, thereby maintaining accuracy. If the gauge were filled to 100% even the slightest temperature change would significantly affect gauge readings as the expanding fluid would have no place to go. To give you even further accuracy over a wide operating range these Longacre gauges have a Special Vent Valve on the top of the gauge. A quick turn of the knob allows you to totally equalize internal and external pressures, guaranteeing the best accuracy possible. Liquid filled gauges have many advantages. But they can change readings by as much as 2-3 psi if the temperature changes... All pressure gauges - liquid filled and regular - need to be vented to the outside to read accurately. If not vented, as the surrounding temperature changes, they will build up pressure inside and affect the accuracy - by as much as 2-3 psi! But if a liquid filled gauge is vented it will leak on your hands and in your tool box. Some manufacturers aren't aware of this and don't vent the gauge. You then have to deal with the variation in accuracy. Now from Longacre comes the simple answer to this problem. We have installed a specially designed pressure equalizer valve on the top of the gauge. Before you use the gauge just loosen the knob on top of the gauge 1/4 turn, then hand retighten. Instantly any temperature-caused pressure difference will be eliminated and you will be guaranteed the most accurate readings possible. If you have a liquid filled tire gauge prove it to yourself. Take your gauge that has been in a cool place and in the typical range you use. Then take the gauge and put it out in the sun for about 45 minutes, as would happen during a race. Then re-check the tire that is still in the cool place. You will see that the reading has changed. You know that the pressure in the tire is the same so the gauge reading must now be off. How will this affect your handling to have tire pressures high or low by several psi? What's worse is that you don't know at what temp the gauge is actually correct! It depends on the temp in the factory when it was manufactured. You could remove the rubber fill plug on the gauge. But then the liquid would leak out.

Longacre 0-45 by ½ lb Liquid Filled 2½” Tire Gauge The Longacre 52-52012 Liquid Filled 2½” GID Tire Gauge 0-40 by ½ lb keeps the highest value racecars at the front of the pack. Longacre Liquid Filled 2½” GID Tire Gauge 0-40 by ½ lb is a trackside favorite with many teams from ChampCar to IMSA. Longacre 0-40 by ½ lb Liquid Filled 2½” Tire Gauge Details: Manufacturer: Longacre Manufacturer part number: 52-52012 2 1/2" Deluxe Gauge with protective bumper 1/2 lb. increments with 2% accuracy 17" hose with swivel angle chuck installed with alternate ball chuck included Holds pressure until released Glow-in-the-Dark dial face Specially designed vent valve to equalize pressure and maintain gauge accuracy Liquid Filled Tire Pressure Gauges ALL liquid filled gauges are purposely filled to just 80%. The remaining 20% air pocket helps allow for thermal expansion and contraction as ambient temperature changes, thereby maintaining accuracy. If the gauge were filled to 100% even the slightest temperature change would significantly affect gauge readings as the expanding fluid would have no place to go. To give you even further accuracy over a wide operating range these Longacre gauges have a Special Vent Valve on the top of the gauge. A quick turn of the knob allows you to totally equalize internal and external pressures, guaranteeing the best accuracy possible. Liquid filled gauges have many advantages. But they can change readings by as much as 2-3 psi if the temperature changes... All pressure gauges - liquid filled and regular - need to be vented to the outside to read accurately. If not vented, as the surrounding temperature changes, they will build up pressure inside and affect the accuracy - by as much as 2-3 psi! But if a liquid filled gauge is vented it will leak on your hands and in your tool box. Some manufacturers aren't aware of this and don't vent the gauge. You then have to deal with the variation in accuracy. Now from Longacre comes the simple answer to this problem. We have installed a specially designed pressure equalizer valve on the top of the gauge. Before you use the gauge just loosen the knob on top of the gauge 1/4 turn, then hand retighten. Instantly any temperature-caused pressure difference will be eliminated and you will be guaranteed the most accurate readings possible. If you have a liquid filled tire gauge prove it to yourself. Take your gauge that has been in a cool place and in the typical range you use. Then take the gauge and put it out in the sun for about 45 minutes, as would happen during a race. Then re-check the tire that is still in the cool place. You will see that the reading has changed. You know that the pressure in the tire is the same so the gauge reading must now be off. How will this affect your handling to have tire pressures high or low by several psi? What's worse is that you don't know at what temp the gauge is actually correct! It depends on the temp in the factory when it was manufactured. You could remove the rubber fill plug on the gauge. But then the liquid would leak out.

Longacre Deluxe 2½” GID Quick Fill Tire Gauge 0-60 psi NEW Design Tire Pressure Gauge - Great looking new graphics and includes both angle and ball chucks. The Longacre Deluxe 2½” GID Quick Fill Tire Gauge 0-60 psi keeps the highest value racecars at the front of the pack. Longacre Deluxe 2½” GID Quick Fill Tire Gauge 0-60 psi is a trackside favorite with many teams from ChumpCar to Grand-Am. Longacre Deluxe 2½” GID Quick Fill Tire Gauge 0-60 psi Details: Reads without removing the fill chuck Fills twice as fast Tire bleed button for excess pressure 17" hose with angle chuck - ball chuck also included Deluxe 2 1/2" Glow-in-the-dark face Internal check valve allows use as a stand alone tire pressure gauge without air hose Manufacturer: Longacre Manufacturer part number: 52009 Use this MUST HAVE tool as your regular tire gauge for consistency

SPEEDCOM SCC-HSK3.5 helmet speaker kit features a 3.5mm mono connector to tie into existing communications systems. The speaker pads feature velcro mounting to easily and surely attach to your helmet's interior. SPEEDCOM Single Ear Headset Details: Manufacturer: SPEEDCOM Manufacturer part number: SCC-HSK3.5 Wiring harness protocol: 3.5mm mono [img-12637-left-large_default]