Sold out
Sparco ADV Prime Competition Pad Carbon Racing Seat side profile showing carbon shell
Sparco ADV Prime Competition Pad Carbon Racing Seat | FIA 8862-2009 $5,750.00
Sparco ADV Prime Competition Pad Carbon Racing Seat | FIA 8862-2009 The Sparco ADV Prime Competition Pad Carbon Racing Seat represents the pinnacle of FIA 8862-2009 homologation technology, designed for professional drivers who demand uncompromising ergonomics, structural integrity, and comfort during the most demanding racing conditions. This seat combines a carbon fiber monocoque shell with advanced padding technology to deliver exceptional support and safety. Compatibility Universal fit for competition vehicles using FIA-homologated side-mount seat brackets Compatible with GT, Touring, Rally, Endurance, and Prototype race cars Requires FIA-compliant side mounting with M12 hardware and 290 mm lateral spacing Professional-Grade Carbon Construction The ADV Prime Competition Pad features a shaped backrest that envelops the driver for maximum support, with additional reinforcement in the lumbar area to improve posture and reduce fatigue during endurance events. Its removable double-density padding is designed for optimal comfort and adaptability, while the self-extinguishing fabric lining meets stringent FIA fire safety standards. Efficient carbon construction keeps weight low while exceeding FIA crash performance requirements. Features FIA 8862-2009 homologation (No. AS.099.22) Carbon fiber monocoque shell with enhanced lumbar reinforcement Ergonomic backrest design to envelop the driver’s torso Removable double-density competition pads for custom fit Self-extinguishing fabric lining for fire resistance Efficient carbon construction for optimal strength-to-weight ratio M12 side mounting with 290 mm spacing for FIA-compliant installation Add Sparco ADV Prime Side Mount Brackets (004990ADV) Sparco ADV Prime Competition Pad Carbon Racing Seat FAQs: What makes this seat different from the standard ADV Prime? The Competition Pad version includes enhanced lumbar support and shaped padding for increased endurance comfort and precision driving feel. Is this seat FIA 8862-2009 homologated? Yes. It meets FIA 8862-2009 standards and carries homologation number AS.099.22. Can the pads be removed or replaced? Yes. The double-density pads are fully removable and replaceable, allowing for a custom fit. Is this seat suitable for road cars? No. FIA 8862-2009 seats are designed exclusively for race vehicles with FIA-compliant mounting. What is the expected lifespan? FIA 8862-2009 seats are typically valid for 10 years from manufacture, with potential extensions depending on regulations. Equip your race car with the Sparco ADV Prime Competition Pad Carbon Racing Seat and experience the highest level of FIA-approved safety, ergonomics, and endurance comfort.
Schuberth SF4 8860-2018 Carbon Fiber Helmet main image with carbon shell and tinted visor
Schuberth SF4 8860-2018 Carbon Fiber Helmet (non-ABP) $5,700.00
Schuberth SF4 8860-2018 Carbon Fiber Helmet (Non-ABP) The Schuberth SF4 8860-2018 Carbon Fiber Helmet brings Formula-level materials, protection, and visor technology to professional GT, prototype, endurance, and open-cockpit drivers who do not require an ABP-homologated helmet. Handcrafted at Schuberth’s motorsport production facility in Italy, the SF4 combines an autoclave-cured carbon fiber shell with advanced ventilation, a Formula-derived injected visor, a two-stage visor lock, and extensive accessory compatibility. Its compact construction and refined interior are designed to support drivers through long race stints without compromising the advanced protection required by the FIA 8860-2018 standard. FIA 8860-2018 Advanced Helmet Protection The Schuberth SF4 is homologated to the FIA 8860-2018 advanced helmet standard under FIA homologation number AH.020.21-C. This is a professional-level motorsport helmet standard developed for demanding international competition. This specific SF4 is the non-ABP version. It does not incorporate the reduced eyeport and extended upper visor-area protection found on the SF4 ABP. That distinction makes the standard SF4 particularly well suited to GT cars, prototypes, endurance vehicles, and open-cockpit applications in which the governing series does not require Advanced Ballistic Protection homologation. Drivers should always verify the required helmet certification with their sanctioning body, race series, or event organizer before purchasing. Handcrafted Autoclave-Cured Carbon Fiber Shell Each Schuberth SF4 begins with a lightweight, hand-laid carbon fiber shell that is cured inside an autoclave. This specialized manufacturing process uses controlled heat and pressure to consolidate the carbon layers and create a strong, consistent helmet structure. The shell is handcrafted at Schuberth’s dedicated motorsport facility in Italy using production techniques developed through more than two decades of Formula racing experience. The result is a compact carbon helmet that balances structural strength, low weight, aerodynamic efficiency, and Schuberth’s unmistakable motorsport profile. Built for Long GT and Prototype Racing Stints The SF4 was developed for drivers who may remain helmeted for extended periods during endurance, GT, and prototype competition. Its compact shell profile, balanced construction, comfortable interior, and controlled airflow help reduce distractions during long sessions. The interior is shaped to maintain stable contact around the driver’s head and face without relying on excessive pressure. Multiple shell and interior configurations help Schuberth provide a more proportional fit across the helmet’s available size range. Because head shape and padding preference can affect fit, drivers should use the Schuberth sizing chart as a starting point and try the helmet on whenever possible. Formula-Derived Ventilation System Air channels integrated into the helmet’s EPS liner distribute fresh air through the interior while directing warm air away from the driver’s head. Schuberth states that, in unrestricted airflow, the system can provide up to 14 liters of fresh air per second at 100 km/h. The SF4 can be configured with optional ventilation accessories to suit different cockpit designs and airflow conditions. Available configurations may include individual ventilation scoops, top-air systems, chin ventilation components, and aerodynamic accessories. This flexibility allows the helmet to be adapted for enclosed GT cockpits, forced-air systems, prototypes, and open-cockpit vehicles. Injected Visor with Optical Clarity The Schuberth SF4 uses an injected visor developed from the brand’s Formula racing program. The manufacturing process is designed to minimize the optical distortion that can occur through the curved viewing area of a conventional racing shield. Schuberth offers multiple compatible visor options ranging from clear and dark tint to mirrored and multi-layer mirrored finishes. This allows drivers to select a visor suited to daytime, nighttime, bright-sun, or changing-weather competition. Standard SF4 visors are supplied with tear-off posts, allowing compatible tear-offs to be installed for events where dirt, rubber, oil, or debris may collect on the visor surface. Pinlock 120 Anti-Fog Performance Standard Schuberth SF4 visors are equipped with a Pinlock 120 anti-fog lens. The insert creates an insulating air pocket between the visor and the lens, helping reduce condensation when cockpit temperature, humidity, or weather conditions change. This system is especially valuable during endurance racing, wet events, cool-weather competition, and driver changes where moisture can quickly affect visibility. The Pinlock lens and visor should be cleaned only with appropriate materials and techniques to avoid damaging their optical or anti-fog surfaces. Central Two-Stage Visor Lock The SF4’s central visor mechanism is designed to close the visor evenly on both sides of the helmet. This symmetrical closure helps create consistent engagement with the eyeport seal and provides dependable visor operation while the driver is wearing racing gloves. The lock provides two functional positions: Stage One: Keeps the visor securely locked while allowing a small amount of ventilation into the helmet. Stage Two: Pulls the visor into a firmer seal to help block fine dust and water. The ventilation position allows the driver to increase airflow without leaving the visor unsecured. The fully sealed position is intended for conditions where dust, spray, or moisture protection takes priority. Communication-System Ready The Schuberth SF4 can be configured with optional integrated communication electronics. This allows the driver to build a professional radio setup suited to the team’s amplifier, connector, microphone, and audio requirements. Communication equipment is not included with the standard helmet unless it is specifically selected as part of the purchased configuration. Microphones, speakers, earphones, connectors, wiring, and related electronics may be sold separately. Any communication or earcup configuration must comply with the rules of the driver’s sanctioning body and race series. Customizable Aerodynamics and Airflow Different cars create different airflow patterns around the driver’s helmet. The SF4 platform can be adapted with compatible accessories to improve airflow, aerodynamic stability, cooling, and cockpit integration. Depending on the selected configuration, compatible Schuberth SF4 accessories may include: Top-air ventilation components Individual helmet ventilation scoops Chin ventilation scoops Rear and top aerodynamic spoilers Replacement clear, tinted, and mirrored visors Pinlock 120 anti-fog components Visor tear-offs Optional integrated communication electronics Replacement interior padding and fit components Accessory availability and compatibility can vary by helmet size, production version, and intended application. Non-ABP SF4 Versus the SF4 ABP The standard SF4 and SF4 ABP share Schuberth’s Formula-derived carbon construction and professional motorsport engineering, but they carry different FIA homologations. The non-ABP SF4 has a larger conventional eyeport and is intended for applications where FIA 8860-2018 certification is required but ABP homologation is not mandatory. The SF4 ABP uses an extended upper visor-area structure and reduced eyeport designed to satisfy Advanced Ballistic Protection requirements. An accessory visor strip or reinforcement panel does not convert the standard SF4 into an ABP-homologated helmet. The helmet remains certified only to the homologation stated on its FIA label. Schuberth SF4 Helmet Features FIA 8860-2018 advanced helmet homologation FIA homologation number AH.020.21-C Non-ABP full-face helmet configuration Designed for GT, prototype, endurance, and eligible open-cockpit competition Hand-laid carbon fiber shell Autoclave-cured carbon construction Compact and lightweight exterior profile Produced at Schuberth’s motorsport factory in Italy Engineering derived from Schuberth’s Formula racing program Air channels integrated into the EPS liner Up to 14 liters of fresh airflow per second at 100 km/h in unrestricted airflow Injected visor designed to reduce optical distortion Multiple clear, tinted, and mirrored visor options available Pinlock 120 anti-fog lens on standard visors Factory-installed tear-off posts Central two-stage visor locking system Locked ventilation position Firm sealed visor position for dust and water resistance Compatible with optional integrated communication electronics Compatible with multiple ventilation and aerodynamic accessories Schuberth helmet pouch included Schuberth SF4 Product Specifications Manufacturer: Schuberth Model: SF4 Helmet Type: Full-face auto racing helmet Homologation: FIA 8860-2018 FIA Homologation Number: AH.020.21-C ABP Homologated: No Shell Material: Autoclave-cured carbon fiber Visor: Formula-derived injected visor Anti-Fog System: Pinlock 120 on standard visors Tear-Off Posts: Included on standard visors Visor Lock: Central two-stage locking mechanism Communication Electronics: Optional and sold separately Included Accessory: Schuberth helmet pouch Manufacturing Location: Italy How to Measure for a Schuberth SF4 Helmet Use a soft measuring tape to measure around the widest circumference of your head. Position the tape approximately one inch above your eyebrows, pass it above the ears, and wrap it around the widest point at the back of your head. Keep the tape level and comfortably snug without pulling it tight. Take the measurement two or three times and use the largest result when reviewing the Schuberth SF4 sizing chart. A properly fitted racing helmet should create firm, even contact around the crown, sides, and cheeks. It should not create sharp or painful pressure points, and it should not rotate independently when the chin strap is properly secured. Schuberth Sizing Chart Questions About the Schuberth SF4 Carbon Helmet Is the Schuberth SF4 certified to FIA 8860-2018?Yes. The non-ABP Schuberth SF4 is homologated to FIA 8860-2018 under FIA homologation number AH.020.21-C. Is this the ABP version of the Schuberth SF4?No. This listing is for the standard non-ABP SF4. It does not carry FIA 8860-2018-ABP homologation. Does non-ABP mean that the SF4 is not an advanced FIA helmet?No. The SF4 is still an FIA 8860-2018 advanced helmet. Non-ABP only means that it does not include the additional Advanced Ballistic Protection configuration required by certain racing series. What type of racing is the non-ABP SF4 designed for?It is designed primarily for GT, prototype, endurance, and open-cockpit racing applications where FIA 8860-2018 is accepted and ABP homologation is not mandatory. Can I use the SF4 in an open-wheel or open-cockpit car?It may be used in open-cockpit applications when the applicable rules permit a non-ABP FIA 8860-2018 helmet. Some series require an ABP-homologated helmet, so the current rulebook must be checked before ordering. What is the difference between the SF4 and SF4 ABP?The SF4 ABP has extended protection above the visor and a reduced eyeport to meet Advanced Ballistic Protection requirements. The non-ABP SF4 has a more conventional eyeport and carries FIA 8860-2018 homologation without the ABP designation. Does adding a visor reinforcement strip make the SF4 ABP certified?No. An accessory strip or visor reinforcement panel does not change the helmet’s FIA homologation. Only a helmet manufactured and labeled as an SF4 ABP carries the ABP certification. Where is the Schuberth SF4 manufactured?Schuberth produces its motorsport carbon helmets at its dedicated factory in Italy using hand-laid, autoclave-cured carbon construction. Does the SF4 include a Pinlock anti-fog lens?Yes. Standard SF4 visors are equipped with a Pinlock 120 anti-fog lens. Does the visor include tear-off posts?Yes. Tear-off posts are installed on the standard visor for use with compatible racing tear-offs. How does the two-stage visor lock work?The first stage keeps the visor locked while allowing a controlled amount of ventilation. The second stage creates a firmer visor seal to help keep out fine dust and water. Does the helmet include radio communication equipment?No. Compatible integrated communication electronics are optional and must be selected separately unless specifically included in the purchased configuration. Can the SF4 be connected to a forced-air system?Yes. Compatible top-air and ventilation components are available for configurations that require a forced-air connection. Confirm the orientation and accessory compatibility before ordering. What comes with the Schuberth SF4 helmet?The helmet includes a Schuberth storage pouch. Visor upgrades, tear-offs, ventilation accessories, aerodynamic components, and communication equipment are sold separately unless otherwise stated. How should the Schuberth SF4 fit?The helmet should feel firmly snug with even pressure around the head and cheeks. It should not move independently when secured, but it should not create painful pressure points.
Stilo ST6 ZERO carbon fiber FIA 8860 racing helmet with clear visor
Stilo ST6 GT ZERO 8860-2018 Carbon Fiber Helmet $5,699.95
Stilo ST6 GT ZERO Carbon Fiber Racing Helmet  The Stilo ST6 GT ZERO Carbon Fiber 8860-2018 Racing Helmet represents the pinnacle of Stilo's lightweight, high-performance motorsport helmet engineering. Developed for professional racers who demand advanced protection, exceptional visibility, and maximum driving comfort, the ST6 GT ZERO combines Stilo's exclusive PURO carbon technology with FIA 8860-2018 homologation. As the evolution of the championship-winning ST5 platform, the ST6 introduces improved aerodynamics, redesigned ventilation, an expanded field of vision, enhanced interior comfort, and an innovative dual-locking visor system. Engineered with input from professional motorsport teams and drivers, the Stilo ST6 GT ZERO is the lightest helmet in the ST6 GT lineup. Its premium carbon fiber shell, integrated communication accessory ports, and advanced safety features make it an exceptional choice for endurance racing, GT competition, prototype racing, and other demanding motorsport applications. Stilo ST6 GT ZERO 8860-2018 Helmet Features FIA 8860-2018 Homologated: Advanced motorsport safety certification for high-level racing competition. Ultra-Lightweight ZERO Carbon Shell: High-tensile carbon fiber construction developed to minimize helmet weight while maintaining structural strength. Stilo PURO Technology: Specialized manufacturing process minimizes unnecessary fillers, lacquers, and clear coats. Improved Aerodynamics: Refined shell geometry developed and tested for exceptional stability at racing speeds. Enhanced Front Ventilation: Redesigned intake system improves airflow and driver comfort. Integrated Top Ventilation: Ventilation openings help channel air through the helmet's internal structure. Increased Downward Visibility: Updated eyeport design provides improved awareness of cockpit controls and track surroundings. Dual-Locking Visor System: Secure visor retention in both fully closed and approved ventilation positions. Injection-Molded Shield: High-performance visor design featuring an improved washable anti-fog treatment. Redesigned Visor Hardware: Updated mechanism designed for smooth operation and convenient shield replacement. Improved Interior Comfort: Redesigned cheek padding supports stability and comfort during extended races. Integrated Side Accessory Ports: Compatible with select Stilo communication, hydration, and ventilation accessories. HANS/FHR Compatible: Supports approved head and neck restraint systems. Intermediate Oval Fit: Interior shape designed to accommodate a broad range of racing drivers. Multiple Shell Sizes: Three shell sizes across the manufacturer's listed size range. New Shell Size Options: Now offered in four shell sizes, the Stilo ST6 auto racing helmet allows you to receive the lightest and smallest shell size possible for your head shape. Stilo PURO Carbon Technology – The Ultimate Lightweight Racing Helmet The ST6 GT ZERO features Stilo PURO carbon fiber technology, a specialized manufacturing process developed to reduce unnecessary weight while preserving strength and protective performance. Traditional carbon fiber helmets often incorporate additional layers of fillers, lacquer, and clear coatings. Stilo's PURO process minimizes these finishing materials to create a lighter helmet without compromising the advanced carbon fiber construction. The result is a distinctive carbon fiber finish that showcases the helmet's premium materials while helping reduce weight at the driver's head. Lower helmet weight can help reduce neck fatigue during sustained cornering loads, heavy braking, and long endurance races. For competitive drivers, this can translate into improved comfort and reduced physical strain over extended sessions. FIA 8860-2018 Homologation for Professional Motorsport The Stilo ST6 GT ZERO is certified to FIA 8860-2018, an advanced motorsport helmet standard developed for demanding professional racing environments. FIA 8860-2018 establishes stringent requirements for impact protection, penetration resistance, flame resistance, and structural performance. The ST6 GT ZERO combines its high-tensile carbon fiber shell with advanced impact-absorbing construction to meet these demanding requirements. Certification Note: This model is FIA 8860-2018 homologated. It is not the separate ST6 FN ABP model and should not be advertised as FIA 8860-2018 ABP certified. Always verify your racing organization's helmet requirements before competition. Advanced Aerodynamics Developed for High-Speed Racing The Stilo ST6 platform incorporates aerodynamic improvements developed through professional motorsport testing and feedback. The refined shell profile is designed to improve stability in high-speed airflow while reducing unnecessary aerodynamic disturbance around the helmet. These improvements are particularly beneficial in GT and endurance racing, where consistent helmet stability and comfort are important during extended competition. The ST6 GT ZERO also supports compatible Stilo aerodynamic accessories for drivers who require additional customization based on vehicle configuration. Redesigned Ventilation for Increased Airflow The ST6 GT ZERO incorporates an upgraded ventilation system designed to improve airflow without compromising helmet protection. Redesigned front ventilation channels direct fresh air into the helmet, while integrated upper ventilation openings allow airflow through the internal impact-absorbing structure. This design helps manage heat and moisture buildup during demanding racing conditions. The ST6 platform's improved airflow is especially valuable in enclosed cockpits, where temperatures can increase significantly during long racing sessions. Improved Downward Visibility and Driver Awareness Visibility is essential for precision driving, especially when monitoring steering wheel displays, dashboard information, and surrounding competitors. The Stilo ST6 GT ZERO features an updated eyeport design that improves downward visibility compared with the previous ST5 platform. The redesigned opening allows drivers to see more of the cockpit environment while maintaining the helmet's protective construction. This improvement supports greater awareness during braking, cornering, and high-speed competition. Innovative Dual-Locking Visor System One of the most significant improvements introduced with the ST6 series is its dual-locking visor mechanism. Unlike conventional systems that secure the visor only when fully closed, the ST6 visor is designed to lock securely in both the fully closed position and an approved ventilation position. This gives drivers the ability to maintain controlled ventilation while retaining secure visor positioning. The system is engineered to meet applicable FIA requirements and provide reliable operation under demanding racing conditions. Injection-Molded Visor with Washable Anti-Fog Treatment The ST6 GT ZERO uses a redesigned injection-molded visor engineered for optical performance, durability, and convenient maintenance. The shield features an advanced washable anti-fog treatment that helps maintain visibility during changing temperature and humidity conditions. Updated visor hardware provides smoother operation and simplifies shield replacement when changing between compatible clear and tinted Stilo ST6 shields. Optional anodized visor hardware is available for drivers seeking additional customization. Redesigned Interior Padding and Cheek Pads The ST6 platform features updated interior padding designed to improve fit, comfort, and helmet stability. Redesigned cheek pads provide supportive contact around the driver's face while helping minimize unnecessary movement during high-speed driving. The black fire-resistant Nomex interior provides motorsport-appropriate materials while maintaining a comfortable fit during extended sessions. The helmet also incorporates provisions for compatible communication accessories, allowing drivers to customize their setup for different racing applications. Integrated Communication, Hydration, and Air System Compatibility The Stilo ST6 GT ZERO retains the integrated side accessory ports that made the ST5 platform popular among professional racing drivers. These ports accommodate compatible Stilo accessories while helping maintain a clean helmet profile. Depending on the selected equipment, compatible accessories may include: Stilo integrated communication systems Compatible microphone and speaker equipment Hydration systems and drinking tubes Side-air and ventilation accessories Selected aerodynamic components Communication electronics, hydration systems, and external ventilation accessories are sold separately unless specifically included in the selected configuration. HANS and Frontal Head Restraint Compatibility The Stilo ST6 GT ZERO is designed for use with compatible HANS and other approved Frontal Head Restraint systems. The helmet supports appropriate head and neck restraint anchor hardware to provide the connection required for compatible FHR devices. Always verify anchor hardware compatibility and follow the helmet and restraint manufacturers' installation instructions. Stilo ST6 GT ZERO Carbon Fiber Helmet Specifications Manufacturer: Stilo Model: ST6 GT ZERO Manufacturer Part Number Family: AA0800AG3R Helmet Type: Full-face automotive racing helmet Safety Certification: FIA 8860-2018 Shell Material: High-tensile ZERO carbon fiber Construction Technology: Stilo PURO carbon Finish: Premium carbon fiber Helmet Fit: Intermediate Oval Shell Sizes: Three, per current manufacturer specifications Visor: Clear injection-molded shield included Visor System: Dual locking, fully closed and ventilation positions Anti-Fog: Washable anti-fog treatment Ventilation: Redesigned front and upper ventilation Interior: Black Nomex fire-resistant lining Chin Strap: Double D-ring closure FHR Compatibility: HANS and approved head and neck restraint systems Communication Compatibility: Integrated side accessory ports Hydration Compatibility: Compatible with optional Stilo hydration accessories Helmet Bag: Included Compatible Shields: Stilo ST6 helmet shields Stilo ST6 GT ZERO vs. ST5 GT ZERO The ST6 represents the next generation of Stilo's professional motorsport helmet platform, with improvements across several key performance areas. Reduced Weight: Updated construction and shell engineering focus on lower overall weight. Improved Ventilation: Redesigned front intake system enhances airflow. Greater Visibility: Updated eyeport shape improves downward viewing angles. Advanced Aerodynamics: Refined shell geometry supports improved high-speed stability. Updated Interior: Redesigned padding helps improve comfort and helmet stability. New Visor Design: Injection-molded construction and improved anti-fog treatment. Dual Visor Lock: Secure closure in fully closed and ventilation positions. Improved Shield Hardware: Updated pivot components support smoother operation and maintenance. These upgrades make the ST6 GT ZERO an advanced successor for drivers who appreciate the lightweight performance and integrated accessory compatibility of the ST5 series. Stilo ST6 GT ZERO vs. ST6 GT Carbon The ST6 GT ZERO and standard ST6 GT Carbon share the same core ST6 platform and FIA 8860-2018 certification, but the ZERO places additional emphasis on minimizing helmet weight. The ST6 GT ZERO uses Stilo's lightweight PURO carbon construction with reduced finishing materials to achieve the lightest configuration in the ST6 GT range. The standard ST6 GT Carbon offers advanced carbon fiber construction and many of the same platform improvements, while the ZERO is designed for drivers who prioritize maximum weight reduction. Stilo ST6 GT ZERO Helmet Sizing Chart  The ST6 GT ZERO features an Intermediate Oval interior shape and multiple shell sizes to help deliver a comfortable, secure fit. To measure your head, use a flexible measuring tape around the largest circumference of your head, approximately one inch above your eyebrows. Keep the tape level and measure around the widest point at the back of your head. Repeat the measurement two or three times and compare the result with Stilo's official helmet size guide. Fitment Tip: Some drivers who normally wear size 59 in other helmet brands find Stilo size 60 more comfortable, particularly when moving to a larger shell configuration. This is a general fitment observation, not a substitute for measuring and trying on the helmet. The correct racing helmet should fit snugly around the entire head without painful pressure points or excessive movement. Stilo ST6 GT ZERO Frequently Asked Questions What certification does the Stilo ST6 GT ZERO have? The Stilo ST6 GT ZERO is homologated to FIA 8860-2018, an advanced helmet safety standard used in professional motorsport. Is the ST6 GT ZERO the same as the ST6 FN ABP? No. The ST6 GT ZERO is an FIA 8860-2018 helmet. The ST6 FN ABP is a separate model designed to meet the enhanced ABP homologation requirements. What makes the ST6 GT ZERO different from the standard ST6 GT Carbon? The ZERO version uses Stilo's PURO carbon technology to reduce unnecessary finishing materials and minimize shell weight. What is Stilo PURO technology? PURO is Stilo's carbon fiber manufacturing approach that minimizes excess fillers, lacquer, and clear coatings to create an exceptionally lightweight carbon helmet. Does the Stilo ST6 GT ZERO have a dual-locking visor? Yes. The ST6 visor system locks in both the fully closed position and an approved ventilation position. Does the ST6 GT ZERO include a clear visor? Yes. The helmet includes a clear face shield with an advanced washable anti-fog treatment. Is the Stilo ST6 GT ZERO compatible with HANS devices? Yes. The helmet is designed for use with compatible HANS and other approved head and neck restraint systems. Does the helmet have integrated communication electronics? The ST6 GT ZERO includes integrated side accessory ports and supports compatible communication components. A complete intercom system is not included as standard. Can I install a drinking tube? Yes. The helmet supports compatible Stilo hydration accessories, which are available separately. Does the ST6 GT ZERO have improved ventilation compared with the ST5? Yes. The ST6 features redesigned front ventilation and additional airflow improvements developed for high-performance racing. What head shape fits the ST6 GT ZERO? The helmet features an Intermediate Oval interior fit. Proper size selection should be based on head measurements and an actual fit check. How many shell sizes does the ST6 GT ZERO use? The manufacturer's current specifications list three shell sizes across the available size range. Does the Stilo ST6 GT ZERO include a helmet bag? Yes. A helmet bag is included with the standard configuration. Can the Stilo ST6 GT ZERO be used in professional racing? Yes. The helmet is FIA 8860-2018 homologated and designed for professional motorsport applications. Always verify current event-specific requirements. Why Choose the Stilo ST6 GT ZERO Carbon Fiber Racing Helmet? The Stilo ST6 GT ZERO FIA 8860-2018 combines ultra-lightweight carbon fiber engineering, advanced aerodynamics, improved ventilation, exceptional downward visibility, and an innovative dual-locking visor system. For professional GT, endurance, and high-level motorsport drivers, the ST6 GT ZERO delivers one of Stilo's most advanced combinations of protective performance, driver comfort, and weight-saving technology. Experience the next generation of Stilo racing helmet innovation with the ST6 GT ZERO Carbon Fiber 8860-2018 Racing Helmet.
Bell HP77 EVO IV carbon fiber racing helmet with clear visor in front three-quarter view
Bell HP77 EVO-IV 8860-2018 ABP Carbon Fiber Helmet $5,599.95
Bell HP77 EVO-IV 8860-2018 ABP Carbon Fiber Helmet The Bell HP77 EVO-IV 8860-2018 ABP Carbon Fiber Helmet delivers Formula-level protection, aerodynamic performance, cooling, and optical clarity for professional open-wheel and open-cockpit racing. Developed from Bell’s multiple Formula One World Championship-winning HP7 platform, the HP77 EVO-IV combines an ultra-lightweight carbon fiber shell with a narrow eyeport and integrated ballistic materials designed to provide additional protection from flying debris. Homologated to the FIA 8860-2018 ABP advanced helmet standard, the HP77 EVO-IV is engineered for drivers competing where helmet weight, high-speed stability, visibility, ventilation, and impact-energy management must perform at the highest level. Updated shell construction, a multi-piece energy-absorbing liner, optical-grade DSAF visor, and carefully managed airflow make the HP77 EVO-IV Bell’s premier helmet for demanding formula and exposed-cockpit applications. Championship-Proven Bell HP7 Heritage The HP77 EVO-IV is based on the Bell HP7, a helmet platform proven through multiple Formula One World Championships. Bell used this foundation to create an ABP-specific helmet for drivers who need the highest level of frontal protection available within the FIA 8860-2018 helmet standard. Its compact carbon shell, aerodynamic profile, narrow eyeport, advanced ventilation, and integrated cockpit-system channels reflect the requirements of professional drivers competing at extreme speeds. Every major component is designed to work as part of a complete protective system without adding unnecessary exterior bulk or weight. FIA 8860-2018 ABP Advanced Helmet Protection The Bell HP77 EVO-IV is homologated to the FIA 8860-2018 ABP standard. ABP stands for Advanced Ballistic Protection and identifies helmets that incorporate additional protection around the frontal area above the visor. The HP77 EVO-IV uses a visor opening positioned approximately 12 mm lower than the original HP7-style opening. High-strength ballistic materials are integrated into the reinforced frontal structure to increase protection from medium-sized debris and objects that may strike the helmet in an open cockpit. The reduced eyeport is an intentional part of the certified ABP design. Adding an external visor panel or reinforcement strip to a conventional helmet does not convert that helmet into an FIA 8860-2018 ABP model. The complete helmet must be manufactured, tested, labeled, and homologated in its ABP configuration. High-Strength and High-Modulus Carbon Fiber Shell The HP77 EVO-IV shell is manufactured using high-strength and high-modulus carbon fibers selected to provide excellent structural performance at an exceptionally low weight. The shell is finished in exposed matte carbon, giving the helmet a purposeful appearance without disguising its advanced composite construction. Reducing helmet weight can help limit strain on the driver’s head and neck during repeated high-g braking, cornering, impacts, and long race sessions. The compact shell profile also supports improved cockpit clearance and allows the helmet to move more cleanly through high-speed airflow. Multi-Density, Multi-Piece Energy-Absorbing Liner Inside the carbon shell is an advanced multi-density, multi-piece liner engineered to manage different impact loads. Rather than relying on a single uniform layer, the liner uses multiple sections and material densities to help absorb and distribute impact energy across the helmet structure. This construction allows Bell to tune individual areas of the liner according to the protection required around the crown, sides, rear, chin bar, and frontal sections of the helmet. The result is a complete impact-management system designed around the demanding performance requirements of FIA 8860-2018 ABP. Narrow ABP Eyeport for Open-Cockpit Protection The HP77 EVO-IV has a noticeably narrower eyeport than a conventional full-face racing helmet. The reduced opening allows the reinforced upper frontal structure to extend farther downward, increasing the protected area above the visor. Although the eyeport is compact, its shape is developed to preserve the forward and peripheral visibility needed in formula and open-cockpit racing. Drivers should verify that the ABP eyeport provides suitable visibility for their seating position, mirrors, steering-wheel display, and cockpit layout before competing. Optical-Grade Double Screen Anti-Fog Visor The Bell HP77 EVO-IV includes an optical-grade, injection-molded Double Screen Anti-Fog visor. Commonly known as DSAF, this visor construction uses two viewing layers to create an insulating barrier that helps control condensation across the shield. The DSAF system is especially valuable in wet weather, cool temperatures, high humidity, driver changes, and other conditions where rapid temperature differences can cause a conventional visor to fog. Injection molding also supports consistent thickness and optical quality across the curved viewing area. The HP77 EVO-IV uses Bell SE077 3 mm replacement shields. Drivers should confirm that any clear, tinted, mirrored, or specialty visor is specifically listed for the HP77 EVO-IV and its installed pivot hardware. 12-Channel Top and Chin-Bar Ventilation Bell equips the HP77 EVO-IV with a powerful top and chin-bar ventilation system incorporating 12 intake and extraction channels. Fresh air enters through the upper and lower intake areas, moves through the helmet, and helps carry heat and moisture away from the driver. The installed intake system includes a two-part center intake and low-profile side components. The low-profile design helps maintain airflow while reducing unnecessary aerodynamic disturbance around the top of the helmet. Effective ventilation can improve driver concentration and comfort while also supporting the performance of the anti-fog visor system. Actual airflow will vary according to vehicle speed, windscreen design, cockpit turbulence, head position, and installed aerodynamic accessories. Aerodynamic Shell and Visor Integration The shell and visor were developed together to improve aerodynamic performance in exposed high-speed airflow. The smooth transition between the visor, shell, intakes, and rear profile helps manage turbulence around the helmet and reduce unwanted lifting or buffeting. Bell also designed the helmet to help reduce internal wind noise and improve the energy-management capability of the complete shell and visor system. Optional top spoilers, top gurneys, and chin-bar gurneys are available separately. These components allow the helmet’s aerodynamic balance to be adjusted for different cockpit designs, windscreens, seating positions, and airflow conditions. Integrated Communication and Hydration Channels Channels integrated into the HP77 EVO-IV facepiece provide multiple routing options for radio and hydration equipment. These passages help teams install compatible communication wiring or a drinking tube without placing excessive pressure between the helmet liner and the driver’s head. A frontal chin-bar opening for a drinking tube is available as an optional special-order configuration. Radio electronics, microphones, earbuds, wiring, connectors, drink tubes, valves, and hydration components are not included unless specifically selected with the helmet. Any installed communication or hydration equipment must be routed carefully so it does not interfere with helmet fit, visor operation, chin-strap security, visibility, or head-and-neck-restraint use. Factory-Installed HANS Anchors Factory-installed HANS anchors are included as original equipment. These attachment points allow a compatible head-and-neck restraint to be connected to the helmet using the restraint manufacturer’s approved tether system. The anchors should not be removed, altered, repositioned, or replaced with unapproved components. Always follow the helmet and restraint manufacturers’ instructions and confirm the applicable head-and-neck-restraint requirements with the sanctioning body. Synthetic Rubber Eyeport Seal A synthetic rubber gasket surrounds the visor opening to help reduce the entry of water, dust, rubber debris, and other contaminants. When the visor is properly closed, the gasket creates a more controlled seal between the shield and helmet shell. The eyeport gasket should be inspected regularly for cuts, deformation, looseness, or contamination. Damaged seals should be replaced with the correct Bell component rather than repaired with adhesive or non-approved material. Bell HP77 EVO-IV Helmet Features FIA 8860-2018 ABP advanced helmet homologation Developed for professional formula and open-cockpit racing Based on Bell’s multiple Formula One World Championship-winning HP7 platform Ultra-lightweight high-strength and high-modulus carbon fiber shell Matte exposed carbon fiber finish Very narrow ABP eyeport Visor opening positioned approximately 12 mm lower for increased frontal protection Integrated ballistic materials above the visor opening Advanced multi-density, multi-piece energy-absorbing liner Optical-grade injection-molded DSAF visor Double-screen construction for enhanced anti-fog performance Top and chin-bar ventilation system 12 air-intake and extraction channels Installed two-part center intake Installed low-profile side air intakes Shell and visor designed for aerodynamic performance Designed to help reduce internal noise Integrated channels for communication and hydration equipment Optional frontal drinking-tube opening available by special order Optional top spoiler and aerodynamic gurneys available separately Factory-installed HANS anchors Synthetic rubber eyeport gasket Bell HP helmet bag included Bell HP77 EVO-IV Specifications Manufacturer: Bell Racing Model: HP77 EVO-IV Helmet Type: Full-face ABP auto-racing helmet Primary Application: Formula and open-cockpit racing Homologation: FIA 8860-2018 ABP Shell Material: High-strength and high-modulus carbon fiber Exterior Finish: Matte carbon fiber Liner: Multi-density, multi-piece energy-absorbing construction Visor: Optical-grade injection-molded Double Screen Anti-Fog visor Compatible Shield: Bell SE077 3 mm shield Shield Pivot Kit: Bell SV for SE07 and SE077 applications Ventilation: 12 intake and extraction channels HANS Anchors: Factory installed Standard Interior: Dark grey high-strength, high-comfort flame-resistant fabric Available Sizes: 54, 55, 56, 57, 58 and 59+ Included Accessory: Bell HP helmet bag Standard and Custom Interior Fabric Options The standard HP77 EVO-IV interior uses dark grey high-strength, high-comfort flame-resistant fabric. Alternative interior colors may be ordered for drivers who want a personalized helmet or need an interior color that complements a custom-painted exterior. Special-order interior colors may include: Black White Tan Red Purple Blue Green Neon Yellow Pink Orange Alternative interior colors are special-order options and may require additional production time and added cost. Availability should be confirmed before ordering. Special-order configurations may not be eligible for cancellation, return, or exchange once production has begun. Optional HP77 EVO-IV Accessories Bell SE077 clear and specialty visors Compatible visor tear-offs Bell SV shield pivot components Top aerodynamic spoiler Top gurney accessories Chin-bar gurney accessories Drink-tube components Communication-system components Replacement eyeport gasket and service components Accessory compatibility can vary according to helmet size, production revision, visor-lock system, and intended installation. Confirm the exact HP77 EVO-IV configuration before purchasing replacement visor hardware or aerodynamic components. How to Measure for the Bell HP77 EVO-IV Use a soft measuring tape to measure around the widest circumference of the head. Position the tape approximately one inch above the eyebrows, pass it above the ears, and wrap it around the widest point at the rear of the head. Keep the tape level and comfortably snug without pulling it excessively tight. Take the measurement two or three times and use the largest consistent result when reviewing the Bell helmet sizing chart. The HP77 EVO-IV should create firm, even pressure around the crown, sides, rear, and cheeks. The helmet should not rotate independently when the chin strap is secured. A new helmet may feel tighter than expected because the interior padding will settle slightly with use, but it should not create sharp or painful pressure points. Because the HP77 EVO-IV uses a narrow ABP eyeport, drivers should also confirm that their eyes align correctly within the opening and that the helmet provides adequate forward and peripheral visibility in their normal driving position. Bell HP77 EVO-IV Helmet Sizing Chart Questions About the Bell HP77 EVO-IV Helmet Is the Bell HP77 EVO-IV certified to FIA 8860-2018 ABP?Yes. The HP77 EVO-IV is homologated to the FIA 8860-2018 ABP advanced helmet standard. Confirm that this certification satisfies the current requirements of your sanctioning body, championship, and vehicle class. What does ABP mean on a racing helmet?ABP stands for Advanced Ballistic Protection. An ABP helmet has additional certified protection around the frontal area above the visor to help protect an open-cockpit driver from flying debris. Why is the HP77 EVO-IV eyeport so narrow?The narrow opening allows the reinforced frontal structure and ballistic materials to extend farther downward above the visor. This reduced eyeport is an intentional part of the FIA 8860-2018 ABP design. Can an ABP visor or reinforcement panel convert a standard helmet into an ABP helmet?No. The helmet must be manufactured, tested, and labeled as an ABP model. Adding an accessory visor panel or reinforcement strip does not change the helmet’s FIA homologation. Is the HP77 EVO-IV only for Formula One?No. It is designed for professional formula and open-cockpit racing, but it may also be used in other applications where FIA 8860-2018 ABP is permitted or required. Always check the current rulebook before ordering. Can the HP77 EVO-IV be used in a closed-cockpit race car?It may be permitted when its certification satisfies the applicable rules. However, the narrow ABP eyeport and open-cockpit-focused configuration may not be necessary for every enclosed vehicle. What is a DSAF visor?DSAF means Double Screen Anti-Fog. The visor uses two viewing layers to create an insulating barrier that helps reduce condensation during wet, cold, or humid conditions. Which replacement visor fits the HP77 EVO-IV?The listed compatible replacement shield is the Bell SE077 3 mm visor. Verify the installed pivot and locking hardware before ordering because Bell may introduce production updates. Are tinted or mirrored visors available?Bell offers compatible visors in multiple finishes for different lighting conditions. Only a visor specifically listed for the HP77 EVO-IV and its hardware should be installed. Does the HP77 EVO-IV include tear-offs?Compatible tear-offs may be installed on properly equipped visors, but tear-off stacks are not included unless specifically stated. Are the aerodynamic spoilers included?No. The top spoiler, top gurneys, and chin-bar gurneys are optional accessories sold separately. Does the helmet include HANS anchors?Yes. Factory-installed HANS anchors are included as original equipment. Can a radio system be installed in the HP77 EVO-IV?Yes. Integrated channels in the facepiece provide routing options for compatible radio wiring and communication components. Electronics and connectors are sold separately unless otherwise stated. Can a drinking tube be added?Yes. The helmet includes internal routing provisions, and a frontal chin-bar drinking-tube opening may be available as a special-order option. What interior color comes standard?Dark grey high-strength, high-comfort flame-resistant fabric is standard. Alternative colors are available by special order and may add cost and production time. What comes with the Bell HP77 EVO-IV?The helmet includes its installed visor, factory HANS anchors, ventilation components, standard interior, and a Bell HP helmet bag. Optional aerodynamic, communication, hydration, and replacement visor components are sold separately. How should the carbon shell be cleaned?Use a soft cloth and a cleaner suitable for premium automotive finishes. Do not use abrasive pads, harsh solvents, or chemicals that could damage the shell coating, visor, gasket, or helmet components. How should the interior be cleaned?Use mild soap, water, and a soft cloth to carefully clean the interior fit padding. Allow the helmet to dry completely before placing it in the helmet bag or storing it.  
Arai GP-7SRC ABP Carbon Racing Helmet in carbon fiber front-left three-quarter view
Arai GP-7SRC ABP 8860-2018 Carbon Fiber Helmet $5,499.95
Arai GP-7SRC ABP Carbon Racing Helmet The Arai GP-7SRC ABP Carbon Racing Helmet represents the highest level of Arai auto racing helmet technology. Designed for professional-level motorsport, the GP-7SRC ABP combines Arai's proprietary racing carbon fiber construction with the enhanced protection required by the FIA 8860-2018 ABP homologation standard. Developed for the extreme demands of high-level racing, particularly open-cockpit competition, the GP-7SRC ABP incorporates Advanced Ballistic Protection directly into the helmet shell. The result is an exceptionally advanced racing helmet engineered around impact management, lightweight construction, aerodynamics, ventilation, and driver comfort. FIA 8860-2018 ABP Advanced Ballistic Protection The Arai GP-7SRC ABP meets the demanding FIA 8860-2018 ABP homologation standard. ABP stands for Advanced Ballistic Protection and adds additional requirements intended to improve protection against debris and objects that may impact the driver's helmet. The GP-7SRC ABP incorporates its external intrusion protection directly into the forehead area of the helmet shell, making the additional ballistic protection an integral part of the helmet's structure. Arai Racing Carbon Fiber Shell Arai uses its proprietary racing carbon fiber construction to deliver exceptional shell strength while maintaining the controlled flexibility required to effectively manage impact energy. Multiple reinforcing materials are strategically incorporated throughout the shell to increase performance while controlling overall helmet size and weight. Arai's smooth, rounded shell design also supports its glancing-off philosophy, helping the helmet redirect energy by reducing areas that could catch on surrounding surfaces during an impact. Designed for Open-Cockpit Racing The GP-7SRC ABP is engineered specifically for the elevated protection requirements associated with open-cockpit race cars. Its carbon fiber shell, integrated ABP protection, aerodynamic profile, and FIA 8860-2018 ABP homologation make it an excellent choice for professional and high-level motorsport applications. Advanced Racing Helmet Ventilation The Arai GP-7SRC ABP features an advanced ventilation system designed to help keep drivers cool during demanding race conditions. Three large closeable air intake vents Enlarged 10mm ventilation openings Additional center exhaust vents Aerodynamic rear exhaust cowling The ventilation system can be adjusted around the driver's cockpit configuration and airflow requirements while helping evacuate heat from inside the helmet. Arai Positive Shield Latch System The GP-7SRC ABP uses Arai's positive shield latch system to provide secure visor closure while retaining smooth and convenient visor operation. Updated shield pivot hardware incorporates a one-piece track slider and T20 Torx adjustment system. The lower shield pivot position also increases the smooth shell area above the visor opening, supporting Arai's focus on improved glancing-off performance. FCS Cheek Pad System Sculpted FCS cheek pads help provide a secure, encapsulated fit around the driver's lower jaw. The design helps reduce unwanted helmet movement while improving comfort and reducing wind noise at high speeds. HANS and FHR Ready Integrated M6 threaded mounting points are built into the GP-7SRC ABP for compatibility with approved HANS and other Frontal Head Restraint systems. A flat mounting surface surrounds each threaded anchor location so compatible restraint posts can seat properly against the helmet shell. Eject System Ready A pre-cut pocket beneath the crown pad allows the GP-7SRC ABP to accommodate an optional Eject emergency helmet removal system without requiring significant modification to the helmet interior. Drink Tube Compatible The removable center chin liner simplifies installation of a driver hydration system. Multiple routing options allow the drink tube to be positioned according to driver preference and cockpit configuration. Arai GP-7SRC ABP Carbon Helmet Features FIA 8860-2018 ABP homologated Integrated Advanced Ballistic Protection Arai proprietary racing carbon fiber shell construction Smooth, rounded shell designed around Arai's glancing-off philosophy Three large closeable intake vents Enlarged 10mm ventilation openings Additional center exhaust ventilation Aerodynamic rear exhaust cowling Arai positive shield latch system Low-position shield pivot hardware T20 Torx shield adjustment system Sculpted FCS cheek pads Integrated M6 HANS/FHR mounting provisions Eject system ready Drink tube compatible Available in sizes X-Small through Large Who Is the Arai GP-7SRC ABP For? The Arai GP-7SRC ABP is designed for racers who require one of Arai's most advanced professional racing helmets and need the additional debris intrusion protection provided by the FIA 8860-2018 ABP homologation. It is especially well suited for professional and high-level drivers competing in open-cockpit race cars where additional ballistic protection is required or preferred. Arai GP-7SRC ABP vs. GP-7SRC The primary difference between the GP-7SRC and GP-7SRC ABP is the additional Advanced Ballistic Protection. The standard GP-7SRC is homologated to FIA 8860-2018, while the GP-7SRC ABP meets the enhanced FIA 8860-2018 ABP specification and incorporates the additional forehead intrusion protection required for ABP homologation. Arai GP-7SRC ABP 8860-2018 Carbon Fiber Helmet Sizing Chart   Questions & Answers What certification does the Arai GP-7SRC ABP have?The Arai GP-7SRC ABP is homologated to the FIA 8860-2018 ABP standard. What does ABP mean?ABP stands for Advanced Ballistic Protection. The specification adds enhanced protection intended to reduce the risk of injury from debris or other objects striking the driver's helmet, particularly in open-cockpit racing. What is the difference between the GP-7SRC and GP-7SRC ABP?The GP-7SRC is homologated to FIA 8860-2018, while the GP-7SRC ABP adds integrated forehead intrusion protection and meets the enhanced FIA 8860-2018 ABP specification. Is the Arai GP-7SRC ABP compatible with HANS devices?Yes. The helmet includes integrated M6 threaded mounting provisions for compatible HANS and other Frontal Head Restraint anchor systems. Can a drink tube be installed?Yes. The removable center chin liner makes installation and routing of a driver hydration tube easier. Is the GP-7SRC ABP compatible with an Eject system?Yes. A pre-cut pocket beneath the crown pad allows installation of an optional Eject emergency helmet removal system. What sizes are available?The Arai GP-7SRC ABP is available in X-Small, Small, Medium, and Large. Can the Arai GP-7SRC ABP be custom painted?Yes. Care must be taken when painting the helmet, and helmet trim components should not be removed in a way that could affect the helmet's FIA certification. Does this helmet require a signature for delivery?Yes. This helmet ships with a signature required for delivery.
Racetech RT8119HR Drag Race Seat Profile Image
Racetech RT8119HR Racing Seat from $5,499.00
Racetech RT8119HR Head Restraint Racing Seat The latest advancement in drag racing seat technology takes an uncompromising form the all-new RT8119HR. Leveraging the accomplished 119 series seat architecture, the RT8119HR is crafted from an ultra-lightweight, premium carbon fiber shell that has been innovated for drag racing with the ultimate in safety, weight savings and comfort. Racetech RT8119HR Racing Seat Features Available in three sizes, starting at 13.0 lbs Significant weight savings enabling valuable weight redistribution Ergonomic shell geometry ensures secure driver fit Energy-absorbing foam optimizes head restraint, shoulder and rib support for additional safety and comfort Pronounced thigh support and molded base cushion Back mount-capable for enhanced chassis feel and structural integrity Large harness guides and provisions for a 7-point harness with reverse submarine belts keeps this seat aligned with the latest NHRA tech regulations Ideal for Pro Mod, Pro Boost, Pro Nitrous, Pro Street, Factory X, Factory Stock Showdown and stock-related classes Racetech RT8119HR Racing Seat Installation Parallel sides, and flush bosses for ease of mounting Choose from steel or aluminum side mount brackets designed for seamless integration with seat mounting points Racetech RT8119HR Racing Seat Size Specifications Application Common Applications Drag racing, where weight reduction is critical Stock Color / Material Gel-coat Clear self-finish Seat Cover Black fire-retardant fabric Wear Patches Black perforated leather Technical FIA Homologation None Shell Construction Carbon Fiber Shell Weight From 5.9lbs (3.4kg) Side Mount Hole Centres 295mm Back Mount Hole Centres 250mm Bolt Torque (Zinc) 30Nm / 22 ft lb Sizes HR - StandardWHR - WideWTHRL - Wide & Tall (Low top) Design Head Restraint Integrated head restraint HANS Compatible Yes Harness Compatibility Up to 7-point harness Large Harness Guides Yes Air Ducting Yes - vented to the driver's lower back Back-mount Compatible Yes Back-mount Required for FIA Homologation N/A Racetech RT8119HR Racing Seat Size Chart
Brembo Brakes Front 412x38 - Eight Pistons (X5M E70 F85, X6M E71 F86)
Brembo Brakes Front 412x38 - Eight Pistons (X5M E70 F85, X6M E71 F86) $5,495.00
For drivers who demand the utmost from their car Designed and tested specifically for track day enthusiasts and for drivers who demand the utmost performance from their cars, these kits offer superlative performance for both normal driving and demanding track day sessions. Brembo kits consist of cross-drilled or slotted ventilated, one-piece or composite discs and aluminium calipers with 4, 6 or 8 pistons; a complete set of high performance pads; metal-braided hoses and high quality hardware. ÄãSolutions and technologies born on the race trackBraking systems consisting of motorsports-derived components offering levels of technology and performance without par on the market today and embodying the purest expression of Brembo's state-of-the-art technology.The kit consists of aluminium calipers with opposed pistons which, depending on the car model and in increasing order of performance, may be composite, monoblock or even billet monoblock components, combined with cross-drilled or slotted one-piece or composite oversized discs.Brembo kits combine the best solutions available to offer the perfect solution for the individual characteristics of each model.The heart of the kit consists of aluminium calipers. These are also available as monoblock parts machined from a single billet of cast aluminium, which ensure outstanding rigidity and minimised deformation. The discs supplied in the kit, which may either be floating or one-piece, depending on the specific car model, feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%.Cross-drilled and slotted finishes are designed and executed with meticulous precision. These holes or slots in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for each application, T√úV/DOT homologated metal-braided hoses, an adapter and high-quality fastener hardware complete the kit. More braking torque and thermal capacity on the trackUsing radial-mounted fixed calipers together with oversized discs gives the system greater braking torque and superior thermal capacity. The result is a braking action that is noticeably more immediate and decisive even in normal road usage, and is extraordinarily powerful and consistent under the repeated loads of track use. Fixed calipers improve the durability and efficiency of the system: the opposed multiple pistons act on the pads with more precision, due to the smaller piston diameter and the reduced pressure exerted on each individual piston, while the greater overall surface area between the pads and pistons results in more uniform friction surface wear. The superlative stiffness of the calipers and the metal braided hoses reduce brake fluid absorption. The result is improved, more stable brake pedal pressure, making it possible to modulate braking force more precisely and enhancing pedal feel. Featuring a hat in aluminium alloy, the oversized floating disc system reduces unsprung mass (for improved handling) and thermal stress. The mounting system is engineered to permit a greater degree of both radial and axial float. This characteristic, together with the greater dimensions of the braking rotor surface, improves the dispersion of the heat generated by the repeated, intense thermal stress that the discs are subjected to, for consistent braking performance and pedal feel even after numerous laps on the track. Eye-catching, unique looksWith a combination of painted calipers (available in red, black or silver) flaunting the Brembo logo, and slotted or cross-drilled discs, the Gran Turismo kit gives an unmistakably sporty, eye-catching look to the car, offering that extra special touch for drivers who want their vehicle to stand out from the crowd.Catering for the more discerning driver is the GT-R line of kits. These offer even more performance and consist of billet-monoblock calipers, slotted discs in diameters up to 405 mm and special high performance pads.
Racetech RT4129HR Race Seat Profile image
Racetech RT4129HR Racing Seat from $5,299.00
Racetech RT4129HR Head Restraint Racing Seat Surpassing the stringent demands of the FIA 8862-2009 Advanced Racing Seat standard, the 129 series is Racetech’s no-compromise professional motorsport seat. Adept at cradling Bathurst winners and all of the Australian Supercar competition, there is none better when it comes to comfort and safety. This is our fibreglass (GRP) version offering great strength and safety benefits but in a more affordable option than our 9129 version. CAD models are available on request. Side (RTB1009M) and back (RTB1006B) mounting brackets are included. 10 year FIA life. * To comply with FIA 8862-2009, the 129 series seats must be back-mounted to the rollcage at shoulder level. Back-mounting improves seat strength and stability during an impact, increases driver 'feel' and reduces driver fatigue,  Racetech RT4129HR Racing Seat Details Application Common Applications International-level circuit racing where extreme strength and FIA 8862 homologation is important Stock Color / Material Gel-coat Gloss black Seat Cover Black fire-retardant fabric Wear Patches Grey suede leather Technical FIA Homologation Complies with the latest FIA 8862-2009 regulations Shell Construction Composite Shell Weight From 13.4kg (29.5lbs) Side Mount Hole Centres 295mm Back Mount Hole Centres 250mm Bolt Torque (Zinc) 30Nm / 22 ft lb Sizes HRW - StandardWHR - WideTHR - TallWTHR - Wide & Tall Design Head Restraint Integrated head restraint HANS Compatible Yes Harness Compatibility Up to 6-point harness Large Harness Guides Yes Air Ducting Yes - vented to the driver's lower back Back-mount Compatible Yes - back mounting required for FIA homologation Back-mount Required for FIA Homologation Yes   Racetech RT4129HR Racing Seat Size Chart
AP Racing by Essex Rear Brake Kit (380mm) for F87 BMW M2, F80 M3, F82 M4
AP Racing by Essex Rear Brake Kit (380mm) for F87 BMW M2, F80 M3, F82 M4 $5,290.95
AP Racing Rear Big Brake Kit F87 BMW M2, M2 Competition, M2 CS, F80 M3, F82 M4 Saves several unsprung lbs. vs. the OEM rear brakes Retains full function of OEM parking brake Painted calipers with dust boots add durability in the most punishing driving conditions Low noise, vibration, and harshness for a very OEM-like experience during daily driving Features the game-changing AP Racing Radi-CAL II fixed calipers with a red, black, or silver painted finish Huge 380mm AP Racing J-Hook, fully-floating two-piece discs Caliper pistons sized properly to maintain proper brake bias and work with the OEM BMW master cylinder and ABS system Designed to mate with this front AP Racing Big Brake Kit AP Racing Rear Big Brake Kit Includes: One pair of AP Racing CP9541 World Radi-CAL II four-piston fixed calipers One pair of 380mm x 28mm 72-vane AP Racing CP5914 J-Hook discs with fully floating 6061 hard anodized aluminum hats and attachment hardware One pair of caliper mounting brackets and hardware One pair of Spiegler stainless steel brake lines with abrasion-resistant coating One set of Ferodo DS2500 brake pads Detailed installation instructions
AP Racing by Essex Front Brake Kit (380mm) for F87 BMW M2 (All), F80 M3, F82 M4
AP Racing by Essex Front Brake Kit (380mm) for F87 BMW M2 (All), F80 M3, F82 M4 $5,249.99
Complete AP Racing Front Road Brake Kit F87 BMW M2/M2 Competition/M2 CS, F80 M3, F82 M4 Saves approximately 10 unsprung lbs. vs. M2 Competition front brakes Painted calipers with dust boots add durability in inclement weather conditions Low noise, vibration, and harshness for a very OE-like experience during daily driving Huge 380x36mm, 72 vane AP Racing J Hook, fully-floating 2-piece discs Leverages six piston AP Racing CP9562 World Radi-CAL II calipers with a red, black, or silver painted finish Utilizes large volume brake pads for heat absorption and longevity Pistons sized properly to maintain brake bias and work with the OEM master cylinder and ABS system Designed to mate with OEM rear brakes or our matching rear AP Racing Road Brake Kit This AP Racing Road Brake Kit Includes: One pair of AP Racing CP9562 World Radi-CAL II six-piston calipers One pair of 380mm x 36mm, 72-vane AP Racing CP7177 J-Hook rotors with fully floating 6061 hard anodized aluminum hats and attachment hardware One pair of caliper mounting brackets and hardware One pair of Spiegler stainless steel brake lines with abrasion-resistant coating One set of Ferodo DS2500 brake pads Detailed installation instructions
-10% sale
Stilo-ST6-FN-Zero-Carbon-Fiber-helmet-left-profile-image2
Stilo ST6 FN ZERO 8860-2018 Carbon Fiber Helmet $5,129.96 $5,699.95
Stilo ST6 FN ZERO Carbon Fiber 8860-2018 Racing Helmet The Stilo ST6 FN ZERO Carbon Fiber Racing Helmet is the flagship non-ABP open-wheel helmet in the ST6 range. Developed using experience from Formula One and other elite racing categories, it combines Stilo’s ultra-light Puro Tech carbon construction with improved aerodynamics, increased airflow, greater downward visibility, and FIA 8860-2018 advanced helmet protection. Designed for drivers who require maximum protection without the reduced eyeport of an ABP helmet, the ST6 FN ZERO delivers a wide field of vision, a compact four-shell sizing platform, redesigned interior padding, and an injection-molded visor secured by Stilo’s dual-position visor locking system. Flagship ST6 Helmet for Formula and Open-Wheel Racing The ST6 FN configuration was developed specifically for open-wheel and open-cockpit competition. Its streamlined shell, stable interior, improved airflow, and expanded downward field of view address the conditions drivers experience in formula cars, prototypes, and other exposed-cockpit vehicles. The FN interior does not rely on permanently integrated GT-style radio electronics. Instead, specially designed padding channels make it easier to route optional communication equipment, air hoses, and hydration components according to the requirements of the driver and vehicle. FIA 8860-2018 Advanced Helmet Protection The Stilo ST6 FN ZERO is homologated to the FIA 8860-2018 advanced helmet standard under homologation number AH.030.24-C. This professional-level standard requires significantly higher impact, penetration, shell-strength, and flame-resistance performance than entry-level motorsport helmet certifications. This model is the standard non-ABP version. It does not include the extended forehead protection and reduced eyeport found on the ST6 FN ZERO ABP. Drivers should confirm whether their championship requires standard FIA 8860-2018 or FIA 8860-2018-ABP homologation before ordering. Puro Tech Carbon Fiber Construction The ST6 FN ZERO uses Stilo’s proprietary Puro Tech carbon fiber manufacturing process. Puro Tech reduces the need for heavy cosmetic lacquer and additional external coatings, allowing the natural carbon shell to remain visible while minimizing unnecessary weight. Each shell is produced with careful control of its carbon layers to create a lightweight, compact helmet capable of meeting the demanding performance requirements of FIA 8860-2018. The exposed carbon finish also gives every helmet the distinctive appearance associated with Stilo’s premium ZERO range. Four Shell Sizes Reduce Weight and Exterior Bulk The ZERO range uses four exterior shell sizes so each interior size can be placed into the smallest appropriate helmet shell. This creates a more proportional fit and avoids surrounding smaller head sizes with unnecessary material and exterior volume. A smaller, lighter shell can improve cockpit clearance, aerodynamic stability, balance, and comfort. It can also reduce the strain placed on the driver’s head and neck during long sessions or repeated high-g cornering. Major Improvements Over the Stilo ST5 ZERO The ST6 platform advances the successful ST5 design with improvements focused on weight, airflow, visibility, comfort, and visor operation. Key updates include: Approximately 10% lower weight than the comparable ST5 Approximately 26% more airflow Approximately 11% greater visibility Improved front and upper-shell aerodynamics Redesigned cheek pads for better comfort and stability Additional shell sizing for a smaller, lighter fit Injection-molded visor construction Washable high-performance anti-fog visor treatment Updated visor pivots and mounting hardware Smoother visor movement and easier shield replacement Improved routing channels for electronics, air, and water systems Formula One-Derived Airflow and Aerodynamics Stilo redesigned the ST6 ventilation system using experience gained from Formula One and other professional racing programs. Revised front vents direct fresh air into the helmet while maintaining the structural integrity required by the FIA standard. Ventilation openings in the top of the shell channel air through the EPS liner to help move heat and moisture away from the driver’s head. This increased airflow can reduce discomfort, visor fogging, and concentration loss during hot or physically demanding races. The front profile and upper shell were also shaped to provide greater aerodynamic stability in high-speed airflow. This is particularly important in open-wheel cars, where the helmet is directly exposed to turbulence around the cockpit and roll structure. Increased Downward Field of View The ST6 eyeport provides greater downward visibility than the ST5. This allows drivers to see steering-wheel displays, switches, harness hardware, cockpit controls, and dashboard information with less head movement. The wider usable viewing area also supports better peripheral awareness when approaching other cars, locating corner apexes, or checking mirrors and display screens inside a tightly packaged cockpit. Redesigned Cheek Padding and Interior Stability Stilo redesigned the ST6 cheek pads to provide a more secure and comfortable fit. The updated shape helps stabilize the helmet during braking, cornering, vibration, and high-speed airflow without relying on excessive pressure against the driver’s face. The improved interior also includes accessible channels for routing optional communication wiring, air-system components, and hydration equipment. This allows the helmet to be customized without forcing equipment between the liner and the driver’s head. Injection-Molded Visor with Washable Anti-Fog Treatment The ST6 FN ZERO uses a high-performance injection-molded visor designed to provide consistent optical clarity across its curved viewing area. This production method improves dimensional consistency and helps reduce the distortion that can occur through conventional formed racing shields. The visor receives Stilo’s washable anti-fog treatment to help maintain clear vision during changing temperatures, humid weather, wet races, and extended driving sessions. The visor should be cleaned only with soft materials and suitable water-based products. Compatible ST6 replacement visors are available in clear, smoked, mirrored, double-glazed, and other specialized configurations. Drivers should select only non-ABP ST6 visors for this helmet. Dual-Position Central Visor Lock Stilo’s central visor locking system provides two positively secured operating positions. Fully Closed: Secures the visor firmly against the eyeport seal for maximum protection and aerodynamic stability. Ventilation Position: Holds the visor slightly open while keeping it mechanically locked and controlled. The ventilation position allows additional airflow without leaving the visor unsecured. The central mechanism also closes the visor evenly and remains accessible while the driver is wearing racing gloves. Updated Visor Hardware The ST6 introduces redesigned pivot hardware and visor sliders for smoother movement, easier installation, and improved reliability. Replacement hardware is available in multiple anodized finishes for drivers who want to personalize the helmet’s appearance. ST5 visors and ST5 visor hardware are not interchangeable with the ST6 system. Replacement shields and components must be specifically listed for the Stilo ST6. Ready for Optional Communications, Air, and Hydration The ST6 FN uses a non-integrated equipment layout. Padding channels make it easier to install compatible earbud systems, microphones, radio wiring, air components, and hydration equipment without permanently building those items into the helmet. Communication electronics, speakers, earbuds, microphones, radio adapters, air-system hardware, and drinking-system components are optional unless specifically included with the selected configuration. Available electronic configurations vary between IMSA, NASCAR, Stilo, Peltor, MRTC, Raceceiver, and other communication systems. Connector compatibility should be confirmed before ordering an electronic kit. Stilo ST6 FN ZERO Helmet Features FIA 8860-2018 advanced helmet homologation FIA homologation number AH.030.24-C Non-ABP full-face configuration Developed for formula and open-wheel racing Stilo Puro Tech carbon fiber construction Exposed lightweight carbon shell finish Four shell sizes for a smaller and lighter proportional fit Approximately 10% lighter than the comparable ST5 Approximately 26% more airflow than the ST5 Approximately 11% more visibility than the ST5 Formula One-derived front ventilation Top ventilation channels through the EPS liner Enhanced high-speed aerodynamics Increased downward field of view Redesigned cheek pads for improved comfort and stability Injection-molded visor Washable high-performance anti-fog treatment Central dual-position visor locking mechanism Secure fully closed and ventilation positions Updated visor hardware for smoother operation Interior routing channels for optional equipment Compatible with optional communication systems Compatible with optional air and hydration accessories Compatible with Stilo ST6 non-ABP visors Stilo ST6 FN ZERO Specifications Manufacturer: Stilo Model: ST6 FN ZERO Manufacturer Part Number: AA0810AG3R Helmet Type: Full-face open-wheel racing helmet Homologation: FIA 8860-2018 FIA Homologation Number: AH.030.24-C ABP Homologated: No Shell Material: Puro Tech carbon fiber Visor Construction: Injection molded Visor Treatment: Washable anti-fog treatment Visor Lock: Central dual-position locking system Compatible Shields: Stilo ST6 non-ABP helmet visors Communication Equipment: Optional and sold separately Air and Hydration Equipment: Optional and sold separately ST6 FN ZERO Versus the ST6 FN ZERO ABP The standard ST6 FN ZERO has a conventional full-face eyeport and carries FIA 8860-2018 homologation without the ABP designation. It provides a wider opening for drivers whose series does not require Advanced Ballistic Protection. The ST6 FN ZERO ABP adds an extended protective structure above the visor and uses a reduced eyeport to satisfy FIA 8860-2018-ABP requirements. An ABP visor, reinforcement strip, or other accessory cannot convert the standard ST6 FN ZERO into an ABP-homologated helmet. ST6 FN ZERO Versus the ST6 GT ZERO The ST6 FN ZERO is configured for open-wheel and open-cockpit racing, with a streamlined non-integrated interior and routing provisions for optional equipment. The ST6 GT ZERO is intended primarily for enclosed race cars and places greater emphasis on cockpit communication, noise control, adjustable ear padding, and GT-style hydration integration. Both use premium ZERO carbon construction, but their interiors and intended installations are different. Stilo ST6 FN ZERO 8860-2018 Carbon Fiber Helmet Sizing Chart New Shell Size Options - Now offered in four shell sizes, the Stilo ST6 FN Zero auto racing helmet allows you to receive the lightest and smallest shell size possible for your head shape. Questions About the Stilo ST6 FN ZERO Helmet Is the Stilo ST6 FN ZERO certified to FIA 8860-2018?Yes. The ST6 ZERO is homologated to FIA 8860-2018 under homologation number AH.030.24-C. Is this the ABP version of the Stilo ST6?No. This listing is for the standard non-ABP ST6 FN ZERO. Drivers who require Advanced Ballistic Protection must select a helmet specifically labeled and homologated as the ST6 FN ZERO ABP. What type of racing is the ST6 FN designed for?The FN configuration is designed primarily for formula, open-wheel, and other open-cockpit racing applications. What is the difference between the ST6 FN ZERO and the regular ST6 FN 8860?The ZERO uses Stilo’s premium Puro Tech carbon construction and an additional shell size to minimize weight and exterior dimensions. The standard 8860 version uses a different carbon construction while retaining FIA 8860-2018 approval. Does the ST6 FN ZERO include radio communications?No. The helmet is prepared for optional non-integrated communication equipment, but microphones, earbuds, speakers, wiring, connectors, and radio adapters are sold separately unless specifically stated. Does the ST6 FN ZERO include noise-reduction earmuffs?No standard noise-attenuating earmuffs are listed for the FN configuration. Those features are more closely associated with Stilo’s GT and rally-oriented helmet interiors. Can a communication system be added later?Yes. The interior includes routing channels intended to simplify the installation of compatible communication equipment. The correct kit depends on the radio, connector, microphone, and earbud system being used. Can the ST6 FN ZERO use a forced-air system?Yes. Stilo offers compatible top-air and ventilation accessories for the ST6 platform. The correct component depends on helmet shell size, cockpit layout, hose diameter, and connection direction. Does the visor have an anti-fog treatment?Yes. The injection-molded visor uses a washable high-performance anti-fog treatment. Use only suitable water-based cleaning products and soft materials. How does the dual visor lock work?The central mechanism provides a fully closed position and a separate locked ventilation position. Both positions keep the visor positively engaged. Can I use an ST5 visor on the ST6 FN ZERO?No. The ST6 uses a redesigned visor, pivot system, and mounting hardware. Use only shields specifically listed for the Stilo ST6. Can I install an ABP visor on this helmet?An ABP visor does not convert a standard helmet into an ABP-certified model. The helmet remains certified only to the homologation printed on its FIA label. Is the ST6 FN ZERO suitable for a closed-cockpit GT car?It may be permitted when its certification meets the applicable rules, but drivers who need integrated communications, enhanced noise isolation, or adjustable ear padding may prefer the ST6 GT ZERO. Should I automatically order one size larger in Stilo?No. Some drivers who wear size 59 in other brands prefer Stilo size 60, but fit varies by head shape. Measure carefully and compare the result with the current Stilo sizing chart. Signature Required for Delivery This helmet ships with a signature required at delivery due to its value. Someone must be available at the delivery address to sign for the package.
Chillout_Aircon_V2_Helmet_cooler_Profile_Image
Chillout AirCon V2 Helmet Cooler $5,100.00
Chillout AirCon V2 Helmet Cooler The Ultimate Solution for Motorsport Stay cool, focused, and at peak performance with the AirCon V2 Helmet Cooling System—the most advanced helmet cooling technology engineered for professional and amateur motorsport drivers. Whether you're racing in extreme heat or need to maintain cognitive clarity during long stints, the AirCon V2 delivers continuous, powerful, and dry cooling airflow directly to your helmet, reducing heat stress and moisture buildup. Designed with cutting-edge micro-compressor technology, this compact and lightweight system is built to withstand the harshest racing conditions, ensuring maximum reliability and efficiency on track. Chillout Aircon V2 Key Features 500W Cooling Power – Delivers temperature-controlled, dry air to prevent overheating and improve driver endurance. Adjustable Cooling & Airflow – Set your preferred cooling level with temperature adjustments from 50°F – 80°F and three fan speeds (Low, Medium, High). Lightweight & Compact – Weighing just 7.8 lbs (5.8 kg), the system can be mounted in various locations for maximum convenience. Quick-Release Mounting System – Securely fastens using a carbon fiber baseplate with ball-lock pins for rapid installation and removal. 12V/24V DC Compatibility – Easily integrates into most race car electrical systems or external power sources. Wired Remote Controller – Provides cockpit control over temperature, fan speed, and system settings for on-the-fly adjustments. Eco Mode – Optimized power management to keep amp draw under 15A, ensuring efficient cooling without compromising vehicle performance. Integrated Safety Protections – Low-voltage shutoff (9V-10V) and overcurrent protection (35A max) to safeguard electrical systems. Unmatched Performance From endurance racing to off-road, the AirCon V2 is engineered for drivers who push the limits. Capable of reducing air temperature by up to 32°F (18°C) below ambient conditions, this system ensures sustained comfort in extreme environments, preventing sweat accumulation and maintaining focus when it matters most. Built for rugged durability, high-efficiency cooling, and rapid deployment, the AirCon V2 sets the new standard for driver cooling technology across all forms of motorsport. What’s Included AirCon V2 Helmet Cooling Unit Carbon Fiber Mounting Plate 10 ft Insulated Wiring Harness Quick-Release Ball-Lock Pins Rubber Stand-Offs Wired Remote Controller DESIGN WITHOUT COMPROMISE Crafted with precision and powered by cutting-edge cooling technology, the Chillout AirCon V2 Helmet Cooler is designed for drivers who refuse to compromise on performance, safety, or comfort. The AirCon V2 Helmet Cooler is extraordinarily lightweight, ensuring that it doesn't add any unnecessary burden as you navigate those sharp turns at high speeds. Its streamlined design fits seamlessly into your racing gear bag, making it an extension of your drive to win. ENGINEERED FOR FLEXIBLE, SUPERIOR COOLING What sets this helmet cooler apart is its superior cooling capabilities. Engineered to generate nearly 32 CFM of airflow, the Chillout AirCon V2 Helmet Cooler lowers critical in-hemet temperatures, helping you stay cool and focused during even the most grueling races. The AirCon V2 Helmet Cooler also offers adjustable speed controls, letting you to customize your cooling based on your personal preferences and changing track conditions. Join the ranks of the top-performing drivers who've turned the tables on heat with the Chillout AirCon Helmet Cooler. Order yours today and redefine your racing experience. Because in motorsports, the coolest head nearly always prevails! CHILLOUT AIRCON HELMET COOLER DETAILS Effortless Detachment for Mobile Teams: The AirCon has a quick-release mechanism that allows teams to easily detach the unit from its base, making it ideal for mobile operations. Variable Speed Settings: The AirCon comes with adjustable controls for a comfortable range of air speeds. These settings can be managed from a full-color LCD display. Optional Remote Control: Dash-mountable remote control with 10-foot cord puts temperature control and power on/off at your fingertips. Lightweight Design: Despite its robust performance capabilities, the AirCon is lightweight, enhancing user comfort and ease of use. Cooling Effectiveness: The helmet creates a cooler environment around the wearer's head. Air-conditioned helmets can cool the head by as much as 15º F. CHILLOUT AIRCON HELMET COOLER SPECS Weight: 10 lbs. / 4.55 kg Dimensions: 12.25"L x 6.75"W x 7.00"H CHILLOUT AIRCON HELMET COOLER INCLUDES AirCon Helmet Cooler Carbon Fiber Mounting Plate Wiring Harness Locking Ball Pins Priming Tube Rubber Stand-Offs Carbon Fiber intake plenum (shown) sold separately.
Chillout Genesis system paired with touchscreen controller display showing temp and fan settings
Chillout Systems Genesis-Advanced Driver Cooling System $5,000.00
Chillout Systems Genesis-Advanced Driver Cooling System Genesis – Advanced Driver Cooling System for Endurance and Pro Racing The Genesis is not just another driver cooling box—this is Chillout Systems’ flagship solution, engineered to handle the punishing demands of endurance racing, extreme heat, and full-tilt track days. With up to 525W of active cooling power and a race-ready carbon fiber chassis, this system doesn’t flinch when the heat is on. Using a high-efficiency brushless micro compressor and a precision-tuned liquid cooling loop, the Genesis rapidly pulls heat away from your core. The result? Less fatigue, better mental clarity, and sustained performance when it matters most. A cockpit-mounted digital controller lets you adjust on the fly—so whether you’re on a pace lap or deep into a green-flag stint, you stay in control. From the quick-release baseplate to the included Chillout digital controller, this is pro-grade hardware for drivers who demand the best. Genesis System Features: Carbon Fiber Shell: Lightweight, strong, and heat-resistant to survive brutal cockpit conditions. Quick-Release Baseplate: Allows rapid removal and reinstallation between sessions or drivers. Digital Cockpit Controller: Manage cooling power and settings without ever leaving the driver’s seat. Low-Draw Mode: Ideal for pit stops, safety cars, or low-load intervals to reduce electrical strain. Brushless Micro Compressor: Compact and efficient, built for high-output cooling without high amp draw. Fully Compatible: Works with all Chillout shirts and standard insulated coolant hose kits. What’s in the Box: • Genesis CO-GCV1 Cooling System• Carbon Fiber Baseplate• External Blower• Wired Digital Controller• Power Inverter• Coolant Formula (1 Bottle)• 8AWG Wiring Harness• Mounting Feet and Locking Pins Chillout Genesis Cooling System FAQs: How much cooling power does the Genesis deliver?The system produces up to 525W of active cooling—more than enough to regulate core temperature in endurance racing conditions. Is it compatible with non-Chillout cooling shirts?It’s optimized for Chillout gear but also works with standard insulated coolant hose systems. Can I adjust cooling during a race?Yes, the wired digital controller mounts in your cockpit for real-time performance tuning. What makes the Genesis different from other cooling units?The Genesis features carbon fiber construction, a low-amp brushless compressor, and pro-level modularity—making it the most advanced system in Chillout's lineup. If you’re serious about peak performance in the heat of competition, the Genesis system is your secret weapon. Keep your cool, race harder, and finish stronger with Chillout Systems Genesis.
Arai GP-7SRC Carbon Racing Helmet in carbon fiber front-left three-quarter view
Arai GP-7SRC 8860-2018 Carbon Fiber Helmet $4,999.95
Arai GP-7SRC 8860-2018 Carbon Helmet The Arai GP-7SRC Carbon Racing Helmet is Arai's elite closed-cockpit auto racing helmet, engineered for drivers who demand an exceptionally lightweight carbon shell, advanced impact management, excellent airflow, and FIA 8860-level protection. Built around Arai's proprietary racing carbon fiber construction, the GP-7SRC combines high strength with controlled flexibility to help manage impact energy while keeping helmet size and weight to a minimum. Arai specifically developed the GP-7SRC for the demands of high-level closed-cockpit motorsport, and the helmet meets or exceeds the FIA 8860-2018 standard. FIA 8860-2018 Homologated The GP-7SRC is homologated to FIA 8860-2018, one of the highest-level helmet standards used in professional motorsport. This version is the standard GP-7SRC and should not be confused with the separate GP-7SRC ABP model, which adds Advanced Ballistic Protection certification. :contentReference Proprietary Racing Carbon Fiber Shell The defining feature of the GP-7SRC is its proprietary Arai carbon fiber shell. Rather than relying only on stiffness, Arai engineers the material and weave to provide exceptional strength along with a degree of flexibility intended to help manage impact energy. Multiple reinforcing materials are incorporated into the shell to increase performance while minimizing unnecessary weight and bulk. The result is a premium racing helmet designed specifically for drivers competing at the highest levels of closed-cockpit racing. :contentReference Arai Glancing-Off Shell Philosophy Arai's helmet design philosophy emphasizes a smooth, rounded shell that can help redirect energy by allowing the helmet to glance away from an obstacle rather than unnecessarily catching against it. On the GP-7SRC, the shield pivot hardware has been repositioned lower on the shell, increasing the smooth shell area above the eyeport. The pivot system uses a one-piece track slider with T20 Torx adjustment hardware. :contentReference Advanced GP-7 Ventilation The GP-7SRC uses three large closeable intake vents, larger 10mm ventilation openings, and two additional center exhaust vents to move more air through the helmet. A redesigned rear exhaust cowling helps hot air escape while also improving aerodynamic performance. This increased airflow is especially valuable during long sessions in enclosed race cars where cockpit temperatures can climb quickly. :contentReference Positive Shield Latch Arai's positive shield latch provides secure visor closure while still allowing normal shield operation. Rather than functioning as a separate add-on, the latch is engineered as an integrated component of the GP-7 shield system. :contentReference FCS Cheek Pads for a Secure Racing Fit The GP-7SRC uses sculpted FCS cheek pads designed to grip the driver's lower jaw more securely. This gives the helmet a more encapsulated feel and can help reduce unwanted movement and outside wind noise at speed. Replacement GP-7 cheek pads are also available in multiple thicknesses, allowing the interior fit to be fine-tuned when appropriate. :contentReferenceFHR and HANS Compatible The GP-7SRC incorporates factory-installed M6 threaded mounting provisions designed to accommodate compatible Head and Neck Restraint anchor systems. A flat mounting surface around each threaded location allows compatible anchor bases to sit flush against the helmet shell, simplifying installation of many HANS and other FHR systems. :contentReference Eject System Ready A pre-cut pocket beneath the crown pad allows the optional Eject helmet removal system to be installed without extensive modification to the interior.Drink Tube Compatible The GP-7SRC's center chin liner can be removed to simplify installation of a hydration tube. Arai provides four possible drink-hose placement locations, allowing the setup to be tailored to the driver's cockpit and preference. :contentReference Arai GP-7SRC Features FIA 8860-2018 homologation Arai proprietary racing carbon fiber shell Designed for high-level closed-cockpit motorsport Strong yet flexible carbon construction for impact-energy management Multiple shell reinforcing materials Three large closeable intake vents Larger 10mm ventilation openings Two additional center exhaust vents Redesigned aerodynamic exhaust cowling Arai positive shield latch Lower-position shield pivot system T20 Torx shield adjustment hardware Sculpted FCS cheek pads Integrated M6 FHR mounting provisions Eject system-ready crown pad Drink tube compatible Intermediate Oval interior fit Available in sizes X-Small through Large GP-7SRC vs. GP-7SRC ABP The GP-7SRC meets FIA 8860-2018 and is engineered primarily for elite closed-cockpit racing. The GP-7SRC ABP is a separate version that meets the FIA 8860-2018 ABP specification and adds the additional forehead intrusion protection associated with Advanced Ballistic Protection. If your series specifically requires ABP certification, choose the GP-7SRC ABP rather than the standard GP-7SRC.  GP-7 Shield Compatibility The GP-7SRC uses the Arai GP-7 shield family. Replacement shields are available in multiple configurations, including clear, tinted, mirrored, and anti-fog options. :contentReference Getting the Proper GP-7SRC Fit Arai lists the GP-7SRC in X-Small, Small, Medium, and Large with an Intermediate Oval interior fit. Proper helmet fit is critical to comfort and performance, and head circumference should be measured around the widest portion of the head before selecting a size.  A new helmet should fit firmly and evenly around the head without concentrated pressure points. Because head shape matters in addition to circumference, trying the helmet on is the best way to confirm proper fit. Arai GP-7SRC 8860-2018 Sizing Chart Questions & Answers What certification does the Arai GP-7SRC have?The Arai GP-7SRC meets or exceeds the FIA 8860-2018 homologation standard.  Is the GP-7SRC the same as the GP-7SRC ABP?No. The GP-7SRC meets FIA 8860-2018, while the GP-7SRC ABP is a separate helmet that meets the enhanced FIA 8860-2018 ABP standard.  Is the GP-7SRC intended for closed-cockpit racing?Yes. Arai specifically describes the GP-7SRC as being engineered for the demands of high-end closed-cockpit racing.  Is the Arai GP-7SRC carbon fiber?Yes. It uses Arai's proprietary racing carbon fiber material and weave combined with additional reinforcing materials to provide high strength while controlling weight and shell size.  Does the GP-7SRC support HANS or other FHR systems?Yes. The helmet includes factory-installed M6 threaded mounting provisions designed for compatible Head and Neck Restraint anchor systems. Can I install an Eject system?Yes. A pre-cut pocket under the crown pad allows installation of an optional Eject helmet removal system.  Can a drink tube be installed?Yes. The removable chin liner is designed to simplify drink-tube installation and provides four potential hose-routing positions. :contentReference Can I change the cheek pads to adjust fit?Yes. Arai offers replacement GP-7 cheek pads in multiple thicknesses, allowing the cheek fit to be adjusted when needed.  Can the GP-7SRC be custom painted?Yes, but Arai warns that the helmet trims should not be removed during painting because removing them can void the FIA certification.  What sizes does the GP-7SRC come in?Arai currently lists X-Small, Small, Medium, and Large.  Does this helmet require a signature for delivery?Yes. This helmet ships with signature required for delivery.
Bell HP77 8860-2018 Carbon Fiber Racing Helmet in front-left three-quarter view
Bell HP77 Carbon Fiber Helmet | FIA 8860-2018 ABP from $4,999.00
Bell HP77 Carbon Fiber Helmet The Bell HP77 Carbon Fiber Helmet is Bell Racing's flagship open-cockpit helmet, developed from the multiple Formula 1 World Championship-winning HP7 platform and engineered for professional drivers competing at the highest levels of motorsport. Built around an ultra-lightweight high-strength, high-modulus carbon fiber shell, the HP77 combines advanced ballistic protection, an extremely narrow eyeport, powerful ventilation, excellent aerodynamics, and an optical-grade Double Screen Anti-Fog shield. The helmet is homologated to the FIA 8860-2018 ABP standard. FIA 8860-2018 ABP Homologated The Bell HP77 meets the FIA 8860-2018 ABP standard and was the first Bell helmet to meet this specification. ABP, or Advanced Ballistic Protection, adds additional protection in the frontal area of the helmet for drivers exposed to flying debris in open-cockpit competition. Bell incorporates high-strength ballistic materials above the HP77's narrow eyeport, creating additional protection without compromising the helmet's lightweight carbon construction. Designed for Open-Cockpit Racing The HP77 is specifically intended for professional formula and open-cockpit racers. Its narrow eyeport, ballistic reinforcement, aerodynamic shell, anti-fog visor system, and advanced ventilation are designed for the intense conditions found in open-wheel competition. The HP77 platform remains closely associated with top-level formula racing, including Formula 1, where Bell continues to use the HP77 family with professional drivers. Ultra-Light Carbon Fiber Shell The HP77 uses a high-strength, high-modulus carbon fiber shell manufactured for exceptionally low weight and high structural performance. Bell's High Performance helmet series uses advanced carbon construction combined with a multi-density energy-absorbing liner system to deliver the level of protection required for FIA 8860 racing applications. Advanced Ballistic Protection A distinguishing feature of the HP77 is the reinforced frontal area above the visor opening. High-strength ballistic materials are integrated into this section of the helmet to improve protection against flying debris. The narrow eyeport also reduces the exposed frontal area while maintaining the visibility required for professional open-cockpit competition. Multi-Density Energy-Absorbing Liner Inside the shell, Bell uses an advanced multi-density, multi-piece liner engineered to maximize energy absorption and impact performance. The combination of the carbon outer shell and sophisticated internal energy-management structure allows Bell to deliver extremely high protection while controlling overall helmet weight and dimensions. Optical-Grade DSAF Shield The Bell HP77 includes an optical-grade injection-molded Double Screen Anti-Fog (DSAF) shield. The dual-screen construction is designed to control fogging and maintain clear visibility in changing weather and cockpit conditions. The HP77 uses the Bell SE077 3mm shield and SV(SE07) pivot system. 12-Channel Ventilation System Bell equips the HP77 with a powerful top and chin-bar ventilation system featuring 12 intake and extraction channels. The ventilation arrangement is engineered to move a high volume of air through the helmet while supporting the aerodynamic requirements of open-cockpit racing. The standard air-intake configuration includes a two-piece center intake and low-profile side intakes. Aerodynamic Shell and Shield Design The HP77 shell and visor system are shaped to improve aerodynamic performance, reduce internal noise, and enhance the helmet's overall energy-management characteristics. For drivers who need additional aerodynamic tuning, Bell offers optional top spoilers, top gurneys, and chin-bar gurneys separately. Factory-Installed HANS Anchors The Bell HP77 comes with factory-installed HANS anchors as original equipment, making the helmet ready for use with compatible Head and Neck Restraint systems. Drink Tube and Radio Integration Integrated channels inside the face area provide multiple routing options for drink tubes and radio communication systems. Bell also offers the HP77 with an optional special-order frontal chin-bar opening for direct drink-tube installation. High-Comfort Fire-Retardant Interior The standard HP77 interior uses Bell's Dark Grey High Strength – High Comfort FR fabric. Custom-order interior colors are also available, including Tan, White, Red, Purple, Blue, Green, Neon Yellow, Pink, and Orange. Additional cost and lead time may apply to custom interior options. Synthetic Rubber Gasket Seal A synthetic rubber gasket surrounds the visor opening to help keep dirt and water from entering the helmet, an important feature for open-cockpit racing in changing weather conditions. Bell HP77 Features FIA 8860-2018 ABP homologation Based on Bell's championship-proven HP7 platform Designed for professional open-wheel and open-cockpit racing High-strength, high-modulus carbon fiber shell Integrated ballistic protection in the frontal area Very narrow eyeport Advanced multi-density, multi-piece energy-absorbing liner Optical-grade Double Screen Anti-Fog shield SE077 3mm shield compatibility 12 intake and extraction ventilation channels Low-profile side air intakes Aerodynamically optimized shell and shield design Integrated drink tube and communication routing channels Factory-installed HANS anchors Synthetic rubber visor gasket Optional top spoiler and aerodynamic gurneys available HP helmet bag included Matte carbon fiber finish Available in sizes 54 through 59+ Who Is the Bell HP77 For? The HP77 is intended for drivers competing in professional formula, open-wheel, and open-cockpit racing where FIA 8860-2018 ABP homologation is required or preferred. It is also an excellent choice for racers who prioritize extremely low helmet weight, advanced ballistic protection, premium anti-fog performance, and race-proven aerodynamics. HP77 vs. HP7 Both helmets are based around Bell's High Performance carbon helmet platform, but the HP77 adds the frontal ballistic protection and narrow eyeport required for FIA 8860-2018 ABP homologation. The HP7 is the better comparison for closed-cockpit applications where ABP certification is not required. Bell HP77 Shield Compatibility The HP77 uses the Bell SE077 3mm shield with the SV(SE07) pivot system. Replacement DSAF shields are available in multiple finishes and configurations. Bell HP77 Interior Color Options Dark Grey FR fabric is standard. Bell also offers several custom-order interior colors including Tan, White, Red, Purple, Blue, Green, Neon Yellow, Pink, and Orange. Custom interiors are special-order items and may require additional cost and production time. Bell HP77 Carbon Fiber Helmet Sizing Chart Questions & Answers What certification does the Bell HP77 have?The Bell HP77 is homologated to the FIA 8860-2018 ABP standard. What does ABP mean on the Bell HP77?ABP stands for Advanced Ballistic Protection. The HP77 incorporates high-strength ballistic materials in the frontal area above the eyeport to provide additional protection from flying debris. Is the Bell HP77 designed for open-cockpit racing?Yes. Bell specifically developed the HP77 for professional formula and other high-level open-cockpit racing applications. Is the Bell HP77 carbon fiber?Yes. The HP77 uses an ultra-lightweight high-strength and high-modulus carbon fiber shell. What shield does the Bell HP77 use?The HP77 uses the Bell SE077 3mm shield and SV(SE07) pivot system. Does the HP77 shield have anti-fog protection?Yes. The standard optical-grade shield uses Bell's Double Screen Anti-Fog construction for improved fog control and visibility. Does the Bell HP77 come with HANS anchors?Yes. Factory-installed HANS anchors are included as original equipment. Can I install a drink tube or radio system?Yes. Integrated channels in the helmet provide multiple routing options for drink tubes and communication equipment. How many ventilation channels does the HP77 have?The helmet uses 12 intake and extraction channels through its top and chin-bar ventilation system. Can aerodynamic accessories be added?Yes. Bell offers compatible top spoilers, top gurneys, and chin-bar gurneys separately. Does the Bell HP77 include a helmet bag?Yes. An HP helmet bag is included. What interior color comes standard?Dark Grey High Strength – High Comfort FR fabric is standard. Multiple custom interior colors are available by special order. What sizes are available?Bell lists the HP77 in sizes 54, 55, 56, 57, 58, and 59+.
SilverRocket Front Dry Carbon Aeroshield Splitter for GT4 RS
SilverRocket Front Dry Carbon Aeroshield Splitter for GT4 RS $4,980.00
The SilverRocket Ultra Downforce Front Dry Carbon Fiber Aeroshield Splitter is the ultimate front-end aerodynamic upgrade for competitive Porsche GT4 RS drivers. Crafted entirely from premium dry carbon fiber, this splitter is engineered to generate maximum front-end grip, high-speed stability, and razor-sharp turn-in on the track. SilverRocket Ultra Downforce Front Dry Carbon Fiber Aeroshield Splitter Massive Front Grip. Minimal Weight. Maximum Attack. Developed through advanced CFD modeling and real-world aero testing, the SilverRocket Aeroshield Splitter delivers dramatic increases in front-end downforce without adding unnecessary drag. Its extended flat-plane profile channels high-pressure air under the car while the vertical endplate shields reduce turbulence for a clean, efficient aerodynamic signature. SAFETY NOTICE: The SilverRocket Front Aeroshield is designed to optimize downforce and ideal aerodynamic balance only when paired with the SR DRS-1 Flex Carbon Wing or SR GT4 RS Clubsport Flex Carbon Wing. To maintain driving safety and aerodynamic stability at high speeds, it should not be used with the OEM Porsche GT4 RS or Clubsport rear wing. See the chart below for more information on safe use of the SR Aeroshield. Race-Bred Dry Carbon Construction Built from aerospace-grade dry carbon fiber, the Aeroshield Splitter is as strong as it is light. This advanced composite keeps weight to an absolute minimum while offering exceptional rigidity, allowing you to push harder through high-speed corners and threshold braking zones. Engineered to Dominate This splitter isn’t just for show—its aggressive profile and undertray design increase front downforce across a wide range of speeds, delivering consistent aerodynamic grip when it matters most. Whether you’re chasing lap times or out-braking the competition, the Aeroshield Splitter provides the stability and confidence needed to attack every apex. Direct Fit for GT4 RS Designed as a direct replacement for the OEM unit, this splitter installs using factory mounting points with no cutting or drilling required. Fully compatible with other SilverRocket aerodynamic components including the upcoming SR diffuser and underbody kits. Material: Dry carbon fiber Fitment: Porsche GT4 RS (direct bolt-on) Aero Gain: Significantly increased front-end downforce Weight: Ultra-lightweight dry carbon construction Finish: UV-resistant matte carbon fiber weave Compatibility: Works with SR diffuser and factory bumper Does this splitter require cutting?No. It installs using OEM mounting points—no modification needed. Is this for track use only?Yes. This is a race-grade aerodynamic component not intended for street use in all regions. Will it clear curbs or inclines?This splitter has an aggressive aero profile and sits lower than stock. Caution is advised over curbs and ramps. Unlock the full potential of your setup with this elite-grade upgrade.