Carbon Fiber

C3 Carbon Ferrari F12 Carbon Fiber Rear Spoiler Upgrade your F12's rear end with an autoclaved, pre-impregnated (pre-preg) dry carbon fiber rear spoiler from C3 Carbon. C3 matches the factory 1x1 3K plain weave for an original Ferrari appearance; meticulously hand-laid, C3 Carbon gives you the luxurious look of carbon at a fraction of the Ferrari price. The C3 carbon rear spoiler is fully functional, installs easily, and dramatically upgrades the look of your F12 Berlinetta! FITS Ferrari F12 Berlinetta FEATURES: Autoclaved pre-preg dry carbon fiber with 1x1 3K plain weave matched to Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs easily without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari F12 Carbon Fiber Front Splitter Upgrade your F12's front visage with an autoclaved, pre-impregnated (pre-preg) dry carbon fiber front chin spoiler/splitter from C3 Carbon. C3 matches the factory 1x1 3K plain weave for an original Ferrari appearance; meticulously hand-laid, C3 Carbon gives you the luxurious look of carbon at a fraction of the Ferrari price. The C3 carbon front splitter installs easily and noticeably upgrades the look of your F12 Berlinetta! FITS: Ferrari F12 Berlinetta FEATURES: Autoclaved pre-preg dry carbon fiber with 1x1 3K plain weave matched to Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit USA Seller - FedEx delivery in 1-4 days to anywhere in the US In stock for immediate shipping. Don't wait for weeks or months from other sellers; we carry millions of dollars in inventory to make sure we can ship your Ferrari carbon right away! Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari 488 Spider Carbon Fiber Complete Engine Kit Stunning carbon fiber engine oil/latch cover, trim panels, and airbox cover to completely upgrade your 488 Spider's engine room! Ferrari displays the 488 Spider's beautiful turbocharged V8 engine under a glass bonnet, but the factory's flat-black plastic trim under the bonnet is a significant let down. C3 Carbon allows you to upgrade to 100% dry carbon fiber (no fiberglass or plastic) replacements with quality, fit, and finish that rival Ferrari's own carbon upgrade kit (for which they ask a fortune). C3's autoclave-moulded pre-preg dry carbon fiber brings the 488 Spider engine bay completely up to standard without breaking the bank! C3 perfectly matches the traditional Ferrari 1x1, 3K plain weave to duplicate factory-original quality and craftsmanship. Straightforward installation makes this package one of our most popular upgrades for our 488 Spider customers. FITS: 2016+ Ferrari F488 Spider INCLUDES: C3 Carbon part numbers C3-FER488-032, C3-FER488-033, and C3-FER488-035 FEATURES: Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matches Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari 488 Spider Carbon Fiber Engine Bay Stunning carbon fiber engine bay trim panels are a spectacular upgrade for your 488 Spider! Ferrari displays the 488 Spider's beautiful turbocharged V8 engine under a glass bonnet, but the stock flat-black plastic engine trim is a significant let down. C3 Carbon uses an autoclave to mould pre-impregnated (pre-preg) dry carbon fiber replacements with quality, fit, and finish that rival the factory carbon upgrade (for which Ferrari charges a fortune), bringing the 488 Spider engine room up to standard! C3 matches the traditional Ferrari 1x1 3K plain weave to duplicate factory-original quality and craftsmanship at a fraction of the factory cost. Straightforward installation makes this a very popular upgrade for our 488 Spider customers. FITS: 2016+ Ferrari F488 Spider FEATURES: Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matches Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari 458 Carbon Fiber Side Skirts Made from aerospace-grade autoclaved dry carbon fiber and matched to the Ferrari factory's signature 1x1 3K plain weave pattern, these side skirts are a perfect match to the stunning carbon fiber on the 458. Ferrari can add them to your 458 build at the factory...for $9,000! You can easily install them yourself using only hand tools for a fraction of the factory cost, without sacrificing even the smallest bit of fitment, finish, or quality. Unlike many other brands, these are not carbon overlaid on fiberglass. C3 uses only 100% hand-laid pre-preg dry carbon fiber, formed in the autoclave at high pressure and temperature using billet aluminum molds. These Ferrari carbon fiber side skirts were originally developed using highly innovative fluid dynamics techniques and perfected in the wind tunnel in order to optimize the 458's aerodynamics. The lateral plane on each skirt plays a crucial role in reducing high-speed lift by minimizing air flowing from the side of the car into the underside. C3 Carbon's carbon fiber combines cosmetic appeal with outstanding technical performance, reducing the total weight of the car in the process. FEATURES: Autoclaved pre-preg dry carbon fiber construction with 1x1 3K plain weave matching factory Ferrari carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Porsche 997 Turbo Carbon Fiber Side Intakes Add visual flair to your 997 Carrera Turbo with beautiful carbon fiber side intake vents from C3 Carbon. Direct replacements for the factory plastic pieces, these spectacularly finished and easy to install carbon fiber intake vents add an aggressive look that reflect the 997 Turbo's deep motorsports heritage. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber spoiler is engineered for a perfect fit and is finished flawlessly. C3 matches the OEM Porsche 2x2 3K twill weave for a factory-original appearance. Installation is very straightforward. FITS: 2005-2012 Porsche 997 Carrera Turbo/Turbo S FEATURES: Autoclaved pre-preg dry carbon fiber with 2x2 3K twill weave matched to Porsche factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari 458 Carbon Fiber Fuel Door Upgrade the factory painted fuel door cover on your Ferrari 458 with a C3 carbon fiber cover! Made from aerospace-grade autoclaved dry carbon fiber, matched to Ferrari's traditional 1x1 3K plain weave pattern, it's a perfect match to the rest of the carbon on your 458. Installs easily in minutes. FEATURES: Autoclaved pre-preg dry carbon fiber construction with 1x1 3k plain weave matching OEM Ferrari carbon fiber Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari 488 GTB/Spider Carbon Fiber Front Trunk C3 uses digital 3D laser scanning to ensure that their autoclaved, pre-impregnated (pre-preg) dry carbon fiber front trunk panels fit and function as perfectly as the factory pieces. The difference is C3 does it for a fraction of the cost of Ferrari carbon! C3 has matched the OEM Ferrari 1x1 3K plain weave for a perfectly factory Ferrari appearance. Easy installation makes this a must-have for any 488 GTB or Spider owner. FITS: All 2016+ Ferrari 488 models FEATURES: Autoclaved pre-preg dry carbon fiber with 1x1 3K plain weave identical to Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Ferrari 458 Carbon Fiber Front Trunk C3's exacting quality, precise fitment, and a premium hand-polished finish come at a far more reasonable price than the factory Ferrari pieces. Precision-formed in an autoclave from the finest aerospace-grade pre-impregnated dry carbon fiber, each C3 piece matches the 1x1, 3K plain weave of OEM Ferrari carbon perfectly. Fit-and-finish are, of course, impeccable for a truly factory appearance. FEATURES: Autoclaved pre-preg dry carbon fiber 1x1, 3K plain weave matched to OEM Ferrari Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Each piece installs in minutes without any modifications KIT INCLUDES: Four pre-preg dry carbon trim panels Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Lamborghini Huracan LP610 Carbon Fiber Rear Vent Panels Beautiful carbon fiber replacement for the black plastic trim panels surrounding the Lamborghini Huracan LP610's rear engine hatch. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber panels install simply with no modification, bringing you the most accurate, beautiful fit and finish available anywhere. C3 matches the OEM Lamborghini 2x2, 3K twill carbon weave perfectly for an original Lamborghini appearance. The spectacular look of these carbon fiber piece adds so much flair to the engine cover of Lambo's one-of-a-kind Hurac√ n. Fitment: 2014+ Lamborghini Hurac√ n FEATURES: Autoclaved pre-preg dry carbon fiber with 2x2, 3K Twill Weave matched to Lamborghini OEM carbon fiber Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Install easily without any modifications Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Lamborghini Huracan LP610 Carbon Fiber Engine Bay Panels Incredible carbon fiber replacements for the black plastic engine bay surrounds on the Lamborghini Huracan LP610. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber engine bay trim installs simply with no modification, bringing you astonishing factory-quality fit and finish at an affordable price. C3 matches the OEM Lamborghini 2x2, 3K twill carbon weave perfectly for an original Lamborghini appearance. Spectacular appearance and quality make these carbon fiber panels the perfect upgrade to the Huracan's engine room. Fitment: 2014+ Lamborghini Huracan FEATURES: Autoclaved pre-preg dry carbon fiber with 2x2, 3K Twill Weave matched to Lamborghini OEM carbon fiber Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Install easily without any modifications Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Lamborghini Huracan LP610 Carbon Fiber Engine Cover FREE SHIPPING! Beautiful carbon fiber replacement for the black plastic engine cover on the Lamborghini Huracan LP610. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber engine cover installs simply with no modification, bringing you astonishing factory-quality fit and finish at an affordable price. C3 matches the OEM Lamborghini 2x2, 3K twill carbon weave perfectly for an original Lamborghini appearance. The spectacular look of this carbon fiber piece is the perfect upgrade to the Huracan engine room. Fitment: 2014+ Lamborghini Huracan FEATURES: Autoclaved pre-preg dry carbon fiber with 2x2, 3K Twill Weave matched to Lamborghini OEM carbon fiber Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs easily without any modifications Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products: Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon Lamborghini Huracan LP610 Carbon Fiber Rear Deck Lid Trim Beautiful carbon fiber replacement for the black plastic trim panel on the Lamborghini Huracan LP610's rear deck lid. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber panel installs simply with no modification, bringing you astonishing factory-quality fit and finish at an affordable price. C3 matches the OEM Lamborghini 2x2, 3K twill carbon weave perfectly for an original Lamborghini appearance. The spectacular look of this carbon fiber piece adds a drama to the rear appearance of the Hurac√ n. Fitment: 2014+ Lamborghini Hurac√ n FEATURES: Autoclaved pre-preg dry carbon fiber with 2x2, 3K Twill Weave matched to Lamborghini OEM carbon fiber Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs easily without any modifications Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.