Racing Brake Fluid
Racing Brake Fluid
Brembo Big Brake Upgrades
Brembo Big Brake Upgrades
BMW Racing Brakes
BMW Racing Brakes
Camaro Racing Brakes
Camaro Racing Brakes
Corvette Racing Brakes
Corvette Racing Brakes
Ferrari Racing Brakes
Ferrari Racing Brakes
Ford Racing Brakes
Ford Racing Brakes
Honda / Acura Racing Brakes
Honda / Acura Racing Brakes
Lamborghini Racing Brakes
Lamborghini Racing Brakes
McLaren Racing Brakes
McLaren Racing Brakes
Mercedes Racing Brakes
Mercedes Racing Brakes
Mitsubishi Racing Brakes
Mitsubishi Racing Brakes
NASA German Touring Series
NASA German Touring Series
NASA Spec Series (All)
NASA Spec Series (All)
Nissan Racing Brakes
Nissan Racing Brakes
Porsche Racing Brakes
Porsche Racing Brakes
Subaru Racing Brakes
Subaru Racing Brakes
VW / Audi Racing Brakes
VW / Audi Racing Brakes
Carbotech CT1008 Mazda RX8 Rear 2004-2012
Carbotech Brakes Carbotech CT1008 Mazda RX8 Rear 2004-2012 from $160.00
Carbotech CT1008 Brake Pads Carbotech Race and Track Pads CT 1008 is a popular Mazda RX8 Rear Axle brake pad. Measuring 15mm thick and available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer part number: CT1008A Most popular track combination: R10 Front, R8 Rear G-Loc cross reference: GP1008 Hawk cross reference: HB378._565 Material thickness of pad of backing plate and pad material: .565" Material thickness of pad of backing plate and pad material: 14mm [img-12159-left-large_default] Carbotech Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. Carbotech CT1008 Brake Pad Fitment: 2004 MAZDA RX-8 WITH SPORT SUSPENSION (2004, 2004) 2004 MAZDA RX-8 WITH SPORT SUSPENSION #N/A (2004) 2004 MAZDA RX-8 WITHOUT SPORT SUSPENSION (2004, 2004) 2004 MAZDA RX-8 WITHOUT SPORT SUSPENSION #N/A (2004) 2005 MAZDA RX-8 WITH SPORT SUSPENSION (2005, 2005) 2005 MAZDA RX-8 WITH SPORT SUSPENSION #N/A (2005) 2005 MAZDA RX-8 WITHOUT SPORT SUSPENSION (2005, 2005) 2005 MAZDA RX-8 WITHOUT SPORT SUSPENSION #N/A (2005) 2006 MAZDA RX-8 WITH SPORT SUSPENSION (2006, 2006) 2006 MAZDA RX-8 WITH SPORT SUSPENSION #N/A (2006) 2006 MAZDA RX-8 WITHOUT SPORT SUSPENSION (2006, 2006) 2006 MAZDA RX-8 WITHOUT SPORT SUSPENSION #N/A (2006) 2007 MAZDA RX-8 WITH SPORT SUSPENSION (2007, 2007) 2007 MAZDA RX-8 WITH SPORT SUSPENSION #N/A (2007) 2007 MAZDA RX-8 WITHOUT SPORT SUSPENSION (2007, 2007) 2007 MAZDA RX-8 WITHOUT SPORT SUSPENSION #N/A (2007) 2008 MAZDA RX-8 WITH SPORT SUSPENSION (2008, 2008) 2008 MAZDA RX-8 WITH SPORT SUSPENSION #N/A (2008) 2008 MAZDA RX-8 WITHOUT SPORT SUSPENSION (2008, 2008) 2008 MAZDA RX-8 WITHOUT SPORT SUSPENSION #N/A (2008) 2009 MAZDA RX-8 NO SUBMODEL (2009, 2009) 2009 MAZDA RX-8 NO SUBMODEL #N/A (2009) 2010 MAZDA RX-8 NO SUBMODEL (2010, 2010) 2010 MAZDA RX-8 NO SUBMODEL #N/A (2010) 2011 MAZDA RX-8 NO SUBMODEL (2011, 2011) 2011 MAZDA RX-8 NO SUBMODEL #N/A (2011) [img-12159-left-large_default]
Carbotech CT412 C5 Corvette, 1994-2004 Mustang - Cobra, Bullitt, Mach 1
Carbotech Brakes Carbotech CT412 C5 Corvette, 1994-2004 Mustang - Cobra, Bullitt, Mach 1 from $142.00
Carbotech CT412 C5 Corvette, 1994-2004 Mustang - Cobra, Bullitt, Mach 1 Carbotech CT412 fits the the Chevrolet Camaro, Corvette, Trans-Am, 1994-2004 Mustang - Cobra, Bullitt, Mach 1 are available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer part number: CT412 G-Loc equivalent: GLC412 Hawk Brake equivalent: HB111_.610 Thickness of backing plate and pad material: .610" Thickness of backing plate and pad material: 15mm Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. Carbotech CT412 Fitment: 2004 Ford Mustang Mach 1 2004 Ford Mustang Cobra & SVT, MACH 1 2004 Ford Mustang Cobra 2003 Ford Mustang Mach 1 2003 Ford Mustang Cobra & SVT, MACH 1 2003 Ford Mustang Cobra 2002 Ford Mustang Cobra F5ZZ2001A 2001 Ford Mustang Cobra & Bullitt 2001 Ford Mustang Cobra 2001 Ford Mustang Bullitt 2000 Ford Mustang Cobra & Bullitt 1999 Ford Mustang Cobra & Bullitt 1999 Ford Mustang Cobra 1998 Ford Mustang Cobra 1997 Ford Mustang Cobra 1996 Ford Mustang Cobra 1996 Chevrolet Corvette 1995 Ford Mustang Cobra SVT 1995 Ford Mustang Cobra R 1995 Ford Mustang Cobra 1995 Chevrolet Corvette Heavy Duty Suspension 1995 Chevrolet Corvette except heavy duty suspension 1994 Ford Mustang Cobra 1994 Chevrolet Corvette Heavy Duty Suspension 1994 Chevrolet Corvette except heavy duty suspension 1993 Chevrolet Corvette Heavy Duty Suspension 1993 Chevrolet Corvette except heavy duty suspension 1992 Pontiac Firebird w/Performance Package 1992 Pontiac Firebird Trans Am GTA w/Performance Package 1992 Pontiac Firebird Performance Pkg. 1992 Pontiac Firebird Formula w/Performance Package 1992 Chevrolet Corvette Heavy Duty Suspension 1992 Chevrolet Corvette except heavy duty suspension 1992 Chevrolet Camaro Z28 w/Heavy Duty Brakes 1992 Chevrolet Camaro RS w/Heavy Duty Brakes 1992 Chevrolet Camaro Rear Disc with 1LE Performance Pkg. 1991 Pontiac Firebird w/Performance Package 1991 Pontiac Firebird Trans Am GTA w/Performance Package 1991 Pontiac Firebird Performance Pkg. 1991 Pontiac Firebird Formula w/Performance Package 1991 Chevrolet Corvette Heavy Duty Suspension 1991 Chevrolet Corvette except heavy duty suspension 1991 Chevrolet Camaro Z28 w/Heavy Duty Brakes 1991 Chevrolet Camaro RS w/Heavy Duty Brakes 1991 Chevrolet Camaro Rear Disc with 1LE Performance Pkg. 1990 Pontiac Firebird w/Performance Package 1990 Pontiac Firebird Trans Am GTA w/Performance Package 1990 Pontiac Firebird Performance Pkg. 1990 Pontiac Firebird Formula w/Performance Package 1990 Chevrolet Corvette Heavy Duty Suspension 1990 Chevrolet Corvette except heavy duty suspension 1990 Chevrolet Camaro RS w/Heavy Duty Brakes 1990 Chevrolet Camaro Rear Disc with 1LE Performance Pkg. 1990 Chevrolet Camaro Iroc-Z w/Heavy Duty Brakes 1989 Pontiac Firebird w/Performance Package 1989 Pontiac Firebird Trans Am GTA w/Performance Package 1989 Pontiac Firebird Trans Am GTA SE w/Performance Package 1989 Pontiac Firebird Performance Pkg. 1989 Pontiac Firebird Formula w/Performance Package 1989 Chevrolet Corvette Heavy Duty Suspension 1989 Chevrolet Corvette except heavy duty suspension 1989 Chevrolet Camaro w/Heavy Duty Brakes 1989 Chevrolet Camaro Rear Disc with 1LE Performance Pkg. 1988 Pontiac Firebird w/Performance Package 1988 Pontiac Firebird Performance Pkg. 1988 Chevrolet Corvette Heavy Duty Suspension 1988 Chevrolet Corvette except heavy duty suspension 1988 Chevrolet Camaro w/Heavy Duty Brakes 1988 Chevrolet Camaro Rear Disc - with Performance Pkg. 1987 Chevrolet Camaro Rear Disc - with Performance Pkg. 1986 Chevrolet Camaro Rear Disc - with Performance Pkg. 1985 Chevrolet Camaro Rear Disc - with Performance Pkg.
Carbotech CT78772-F 2020+ Toyota Supra (A90) 3.0 Front Brake Pads
Carbotech Brakes Carbotech CT78772-F 2020+ Toyota Supra (A90) 3.0 Front Brake Pads from $294.00
Carbotech CT78772-F 2020+ Supra (A90) 3.0 Front Brake Pads Carbotech CT78772-F fits the front axle of the 2020+ Toyota Supra 3.0 with the Brembo calipers. Available in Carbotech's 1521, AX6, XP8, XP10 and XP12 compounds. Carbotech offers a variety of compounds that can bring you to the deepest of brake zones, smooth consistent spirited mountain or track days, or the best street pads ever produced. Carbotech CT78772-F 2020 Supra Performance Front Brake Pads Details: Manufacturer: Carbotech Manufacturer part number: CT78772-F Fits: Front of 2020 Toyota Supra 3.0 with Brembo calipers Compounds available: 1521, AX6, XP8, XP10, XP12, XP20, XP24, & RP2 Most popular track combination: XP12 Front, XP10 Rear Carbotech Brake Compounds Carbotech 1521 The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotech AX6 The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotech XP8 A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotech XP10 When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech XP12 Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech XP20 The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech XP24 XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotech RP2 The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech CT78772-F Fitment: 2020+ Toyota Supra (A90) w/Brembo front calipers
Carbotech CT1389 Brake Pads Porsche 997-987-991-981 Front
Carbotech Brakes Carbotech CT1389 Brake Pads Porsche 997-987-991-981 Front from $238.00
Carbotech Brake Pads Carbotech Race and Track Pads CT 1389 is a popular Porsche 981 S/GTS, 991 C2, 997.2 C2, 997.2 C4, front pad. Measuring 17mm thick and available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer part number: CT1389 Most popular track combination: R10 Front, R8 Rear G-Loc cross reference: GP1389 Hawk cross reference: HB719._668 Material thickness of pad of backing plate and pad material: .668" Material thickness of pad of backing plate and pad material: 17mm [img-12155-left-large_default] Carbotech Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. Carbotech CT1465 Brake Pad Fitment: 2009 PORSCHE 911 CARRERA (2009) 2009 PORSCHE 911 CARRERA #N/A (2009) 2009 PORSCHE 911 TARGA (2009) 2009 PORSCHE 911 TARGA #N/A (2009) 2010 PORSCHE 911 CARRERA (2010) 2010 PORSCHE 911 CARRERA #N/A (2010) 2010 PORSCHE 911 TARGA (2010) 2010 PORSCHE 911 TARGA #N/A (2010) 2011 PORSCHE 911 CARRERA (2011) 2011 PORSCHE 911 CARRERA #N/A (2011) 2012 PORSCHE 911 NO SUBMODEL (2012) 2012 PORSCHE 911 NO SUBMODEL #N/A (2012) 2013 PORSCHE 911 NO SUBMODEL (2013) 2013 PORSCHE 911 NO SUBMODEL #N/A (2013) 2013 PORSCHE BOXSTER NO SUBMODEL (2013) 2013 PORSCHE BOXSTER NO SUBMODEL #N/A (2013) 2013 PORSCHE BOXSTER S (2013) 2013 PORSCHE BOXSTER S #N/A (2013) 2014 PORSCHE 911 NO SUBMODEL (2014) 2014 PORSCHE 911 NO SUBMODEL #N/A (2014) 2014 PORSCHE BOXSTER NO SUBMODEL (2014) 2014 PORSCHE BOXSTER NO SUBMODEL #N/A (2014) 2014 PORSCHE CAYMAN NO SUBMODEL (2014) 2014 PORSCHE CAYMAN NO SUBMODEL #N/A (2014) 2015 PORSCHE 911 99135193900 (2015) 2015 PORSCHE BOXSTER 99735193809 (2015) 2015 PORSCHE CAYMAN 99735193809 (2015) 2016 PORSCHE 911 NO SUBMODEL (2016) 2016 PORSCHE BOXSTER NO SUBMODEL (2016) 2016 PORSCHE CAYMAN NO SUBMODEL (2016) 2017 PORSCHE 718 BOXSTER NO SUBMODEL (2017) [img-12155-left-large_default]
Carbotech CT787 Brake Pads - Honda & Acura Front
Carbotech Brakes Carbotech CT787 Brake Pads - Honda & Acura Front from $172.00
Carbotech Brake Pads How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer part number: CT787 Fits: Honda Applications from 1999-2014 Honda Accord and other front pads. Carbotech Brake Pads are available in Carbotech 1521, AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. [img-12121-left-large_default] Carbotech Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. [img-7276-left-large_default] Carbotech CT787 Brake Pads | Honda & Acura Fitment Guide: 1999 ACURA RL NO SUBMODEL (1999, 1999) 1999 ACURA RL NO SUBMODEL ALL (1999, 1999) 1999 ACURA TL NO SUBMODEL ALL (1999, 1999) 2000 ACURA RL NO SUBMODEL (2000, 2000) 2000 ACURA RL NO SUBMODEL ALL (2000, 2000) 2000 ACURA TL NO SUBMODEL ALL (2000, 2000) 2001 ACURA CL NO SUBMODEL ALL (2001, 2001) 2001 ACURA CL TYPE-S ALL (2001, 2001) 2001 ACURA RL NO SUBMODEL (2001, 2001) 2001 ACURA RL NO SUBMODEL ALL (2001, 2001) 2001 ACURA TL NO SUBMODEL ALL (2001, 2001) 2002 ACURA CL 45022S0KA11 (2002, 2002) 2002 ACURA RL NO SUBMODEL (2002, 2002) 2002 ACURA RL NO SUBMODEL ALL (2002, 2002) 2002 ACURA TL NO SUBMODEL ALL (2002, 2002) 2002 ACURA TL TYPE-S ALL (2002, 2002) 2003 ACURA CL 45022S0KA11 (2003, 2003) 2003 ACURA RL NO SUBMODEL (2003, 2003) 2003 ACURA RL NO SUBMODEL ALL (2003, 2003) 2003 ACURA TL NO SUBMODEL ALL (2003, 2003) 2003 ACURA TL TYPE-S ALL (2003, 2003) 2003 HONDA ACCORD COUPE V6 MODELS WITH AUTOMATIC TRANS (2003, 2003) 2003 HONDA ACCORD COUPE V6 MODELS WITH MANUAL TRANS (2003, 2003) 2003 HONDA ACCORD SEDAN 6 CYLINDER (2003, 2003) 2004 ACURA RL NO SUBMODEL (2004, 2004) 2004 ACURA RL NO SUBMODEL ALL (2004, 2004) 2004 ACURA TL W/O BREMBO FRONT CALIPERS ALL (2004, 2004) 2004 ACURA TSX NO SUBMODEL (2004, 2004) 2004 ACURA TSX NO SUBMODEL ALL (2004, 2004) 2004 HONDA ACCORD COUPE V6 MODELS WITH AUTOMATIC TRANS (2004, 2004) 2004 HONDA ACCORD COUPE V6 MODELS WITH MANUAL TRANS (2004, 2004) 2004 HONDA ACCORD SEDAN 6 CYLINDER (2004, 2004) 2005 ACURA TL W/O BREMBO FRONT CALIPERS ALL (2005, 2005) 2005 ACURA TSX NO SUBMODEL (2005, 2005) 2005 ACURA TSX NO SUBMODEL ALL (2005, 2005) 2005 HONDA ACCORD COUPE V6 MODELS WITH AUTOMATIC TRANS (2005, 2005) 2005 HONDA ACCORD COUPE V6 MODELS WITH MANUAL TRANS (2005, 2005) 2005 HONDA ACCORD SEDAN 6 CYLINDER; EXCEPT HYBRID (2005, 2005) 2006 ACURA TL W/O BREMBO FRONT CALIPERS ALL (2006, 2006) 2006 ACURA TSX NO SUBMODEL (2006, 2006) 2006 ACURA TSX NO SUBMODEL ALL (2006, 2006) 2006 HONDA ACCORD COUPE V6 MODELS WITH AUTOMATIC TRANS (2006, 2006) 2006 HONDA ACCORD COUPE V6 MODELS WITH MANUAL TRANS (2006, 2006) 2006 HONDA ACCORD HYBRID V6 HYBRID (2006, 2006) 2006 HONDA ACCORD HYBRID, SEDAN 3.0L (2006, 2006) 2006 HONDA ACCORD SEDAN 6 CYLINDER; EXCEPT HYBRID (2006, 2006) 2006 HONDA CIVIC SEDAN GX; W/REAR DRUMS (2006, 2006) 2007 ACURA TL W/O BREMBO FRONT CALIPERS ALL (2007, 2007) 2007 ACURA TSX NO SUBMODEL (2007, 2007) 2007 ACURA TSX NO SUBMODEL ALL (2007, 2007) 2007 HONDA ACCORD COUPE V6 MODELS WITH AUTOMATIC TRANS (2007, 2007) 2007 HONDA ACCORD COUPE V6 MODELS WITH MANUAL TRANS (2007, 2007) 2007 HONDA ACCORD HYBRID V6 HYBRID (2007, 2007) 2007 HONDA ACCORD HYBRID, SEDAN 3.0L (2007, 2007) 2007 HONDA ACCORD SEDAN 6 CYL; EXCEPT HYBRID (2007, 2007) 2007 HONDA CIVIC SEDAN GX; W/REAR DRUMS (2007, 2007) 2008 ACURA TL W/O BREMBO FRONT CALIPERS ALL (2008, 2008) 2008 ACURA TSX NO SUBMODEL (2008, 2008) 2008 ACURA TSX NO SUBMODEL ALL (2008, 2008) 2008 HONDA ACCORD COUPE EX, EX-L 4 CYLINDER OR EX-L V6 (2008, 2008) 2008 HONDA ACCORD EX, COUPE 2.4L (2008, 2008) 2008 HONDA ACCORD EX, COUPE 3.5L (2008, 2008) 2008 HONDA ACCORD EX, SEDAN 2.4L (2008, 2008) 2008 HONDA ACCORD EX, SEDAN 3.5L (2008, 2008) 2008 HONDA ACCORD SEDAN EX, EX-L (2008, 2008) 2008 HONDA CIVIC SEDAN GX; W/REAR DRUMS (2008, 2008) 2009 ACURA TSX NO SUBMODEL ALL (2009, 2009) 2009 HONDA ACCORD COUPE EX, EX-L 4 CYLINDER OR EX-L V6 (2009, 2009) 2009 HONDA ACCORD EX, COUPE 2.4L (2009, 2009) 2009 HONDA ACCORD EX, COUPE 3.5L (2009, 2009) 2009 HONDA ACCORD EX, SEDAN 2.4L (2009, 2009) 2009 HONDA ACCORD EX, SEDAN 3.5L (2009, 2009) 2009 HONDA ACCORD SEDAN EX, EX-L (2009, 2009) 2009 HONDA CIVIC SEDAN GX; W/REAR DRUMS (2009, 2009) 2010 ACURA TSX NO SUBMODEL ALL (2010, 2010) 2010 HONDA ACCORD COUPE EX, EX-L 4 CYLINDER OR EX-L V6 (2010, 2010) 2010 HONDA ACCORD EX, COUPE 2.4L (2010, 2010) 2010 HONDA ACCORD EX, COUPE 3.5L (2010, 2010) 2010 HONDA ACCORD EX, SEDAN 2.4L (2010, 2010) 2010 HONDA ACCORD EX, SEDAN 3.5L (2010, 2010) 2010 HONDA ACCORD SEDAN EX, EX-L (2010, 2010) 2010 HONDA CIVIC SEDAN GX; W/REAR DRUMS (2010, 2010) 2011 ACURA TSX NO SUBMODEL ALL (2011, 2011) 2011 HONDA ACCORD COUPE EX, EX-L 4 CYLINDER OR EX-L V6 (2011, 2011) 2011 HONDA ACCORD EX, COUPE 2.4L (2011, 2011) 2011 HONDA ACCORD EX, COUPE 3.5L (2011, 2011) 2011 HONDA ACCORD EX, SEDAN 2.4L (2011, 2011) 2011 HONDA ACCORD EX, SEDAN 3.5L (2011, 2011) 2011 HONDA ACCORD SEDAN EX, EX-L (2011, 2011) 2011 HONDA CIVIC SEDAN GX; W/REAR DRUMS (2011, 2011) 2012 ACURA TSX NO SUBMODEL ALL (2012, 2012) 2012 HONDA ACCORD COUPE EX, EX-L 4 CYLINDER OR EX-L V6 (2012, 2012) 2012 HONDA ACCORD EX, COUPE 2.4L (2012, 2012) 2012 HONDA ACCORD EX, COUPE 3.5L (2012, 2012) 2012 HONDA ACCORD EX, SEDAN 2.4L (2012, 2012) 2012 HONDA ACCORD EX, SEDAN 3.5L (2012, 2012) 2012 HONDA ACCORD SEDAN EX, EX-L (2012, 2012) 2013 ACURA TSX NO SUBMODEL ALL (2013, 2013) 2014 ACURA TSX NO SUBMODEL ALL (2014, 2014) [img-12121-left-large_default]
Carbotech 1994-2004 Mustang Cobra, Bullitt, Mach 1, SVT & Shelby Rear
Carbotech Brakes Carbotech 1994-2004 Mustang Cobra, Bullitt, Mach 1, SVT & Shelby Rear from $128.00
Carbotech Brake Pads 1994-2004 Mustang Cobra, Cobra R, Bullitt, Mach 1, Shelby and SVT Rear Carbotech Brake Pads are available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer part number: CT627 Fits: 1994-2004 Mustang Cobra, Cobra R, Bullitt, Mach 1, Shelby and SVT Cobra. Does NOT fit 1994-2004 Base model Mustang. Those cars take the Carbotech CT627A (with the A in the part number) The Carbotech 627 fits the vented rear rotor cars and each pad is .595" thick including both backing plate and pad material [img-12186-left-large_default] Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. [img-12186-left-large_default]
Carbotech 2010-13 Camaro SS 6.2L & ZL1 Rear Brake Pad Set
Carbotech Brakes Carbotech 2010-13 Camaro SS 6.2L & ZL1 Rear Brake Pad Set from $176.00
Carbotech Brake Pads Carbotech Brake Pads for 2010-2013 Camaro SS 6.2L & ZL1 Rear. How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer Part Number: CT1053 Material Thickness (inch): .600" Material Thickness (mm): 15.24mm Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F.
Carbotech CT78772 2020+ Toyota Supra (A90) 3.0 Rear Performance Brake Pads
Carbotech Brakes Carbotech CT78772 2020+ Toyota Supra (A90) 3.0 Rear Performance Brake Pads from $212.00
Carbotech CT78772 2020+ Supra (A90) 3.0 Rear Performance Package Brake Pads Carbotech CT78772-RP fits the rear axle of the 2020+ Toyota Supra with the Performance Package. Available in Carbotech 1521, AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. Carbotech offers a variety of compounds that can bring you to the deepest of brake zones, smooth consistent spirited mountain or track days, or the best street pads ever produced. Carbotech CT78772 2020 Supra 3.0 (A90) Rear Brake Pads Details: Manufacturer: Carbotech Manufacturer part number: CT78772-RP Fits: Rear of 2020+ Toyota Supra 3.0 with the Performance Package Fits 2020+ Toyota Supra with standard package: No Compounds available: 1521, AX6, XP8, XP10, XP12, XP20, XP24, & RP2 Most popular track combination: XP12 Front, XP10 Rear Carbotech Brake Compounds Carbotech 1521 The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotech AX6 The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotech XP8 A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotech XP10 When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech XP12 Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech XP20 The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech XP24 XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotech RP2 The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech CT78772 Fitment (Rear) 2020+ Toyota Supra 3.0 (A90) with Performance Package
Carbotech CTW7912 Wilwood Powerlight Caliper Brake Pads
Carbotech Brakes Carbotech CTW7912 Wilwood Powerlight Caliper Brake Pads from $181.00
Carbotech CTW7912 Wilwood Powerlight Caliper Brake Pads Fitting many Wilwood Calipers like the 7912 the Carbotech CTW7912 brake pad set is available in Carbotech 1521, AX6, XP8, XP10, XP12, XP20, and XP24 compounds. How To Properly Bed In Carbotech Racing Brake Pads Carbotech CTW7912 Wilwood Powerlight Caliper Brake Pads Details: Manufacturer: Carbotech Manufacturer Part Number: CTW7912 Most popular track combination: XP10 Front, XP8 Rear Carbotech CTW7912 Wilwood Powerlight Caliper Brake Pads Fitment: Wilwood Powerlight 7912 [img-12190-left-large_default] BRAKE COMPOUNDS Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. [img-12190-left-large_default]
Carbotech CTPG-8062 Brembo Gran Turismo 6-Piston Brake Pads
Carbotech Brakes Carbotech CTPG-8062 Brembo Gran Turismo 6-Piston Brake Pads from $265.00
Carbotech CTPG8062 Brembo Gran Turismo 6-Piston Brake Pads Fitting many Brembo caliper fitments, the Carbotech CTPG8062 brake pad set is available in Carbotech 1521, AX6, XP8, XP10, XP12, XP20, and XP24 compounds. How To Properly Bed In Carbotech Racing Brake Pads Carbotech CTPG8062 Brembo Brake Pad Details: Manufacturer: Carbotech Manufacturer Part Number: CTPG8062 Most popular track combination: XP10 Front, XP8 Rear Pagid cross reference: 8062 Material thickness of pad of backing plate and pad material: 16.8mm BRAKE COMPOUNDS Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. Carbotech CTPG8062 Brake Pad Fitment: Brembo GT 6 Piston
Carbotech Wilwood Dynapro Caliper Brake Pads CTW7812
Carbotech Brakes Carbotech Wilwood Dynapro Caliper Brake Pads CTW7812 from $143.00
Carbotech Dynapro Caliper Brake Pads CTW7812 Fitting many Wilwood Dynapro caliper fitments, the Carbotech CTW7812 brake pad set is available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. How To Properly Bed In Carbotech Racing Brake Pads Carbotech CT7812 Wilwood 12mm Brake Pad Details: Manufacturer: Carbotech Manufacturer Part Number: CTW7812 Most popular track combination: XP10 Front, XP8 Rear G-Loc cross reference: GP7812 Hawk cross reference: HB542_.490 Material thickness of pad of backing plate and pad material: .490" Material thickness of pad of backing plate and pad material: 12mm [img-12169-left-large_default] BRAKE COMPOUNDS Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. Carbotech CT7812 Brake Pad Fitment: Billet Dynalite - Side Inlet Dynapro Dust-Boot Dynapro Lug Mount Dynapro Lug Mount Dynapro Lug Mount Dynapro Lug Mount Forged DPHA Narrow Dynapro Radial Mount Narrow Dynapro Radial Mount [img-12168-left-large_default]
Carbotech CT961 Brake Pads
Carbotech Brakes Carbotech CT961 Brake Pads from $134.00
Carbotech CT961 Brake Pads Fitting the Stoptech ST-22 calipers and calipers used on many Nissan & Subaru rear axle positions, the Carbotech CT961 is available in Carbotech 1521, AX6, XP8, XP10, XP12 and XP20 compounds. Carbotech offers a variety of compounds that can bring you to the deepest of brake zones, smooth consistent spirited mountain or track days, or the best street pads ever produced. How To Properly Bed In Carbotech Racing Brake Pads Carbotech CT961 Brake Pads Ford & Mazda Front Details: Manufacturer: Carbotech Manufacturer Part Number: CT961 Available compounds: 1521, AX6, XP6, XP8, XP10, XP12 Most popular track combination: XP10 Front, XP8 Rear Hawk cross reference: HB180._560 Material thickness of pad of backing plate and pad material: .560" Material thickness of pad of backing plate and pad material: 14mm CARBOTECH BRAKE COMPOUNDS   Carbotech 1521 The Carbotech 1521 is our high performance street compound. The 1521 compound is known for its release and modulation, along with unmatched rotor friendliness. 1521 is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech 1521 operating range starts out at ambient and goes up to 800 F (426 C+). 1521 is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotech AX6 The AX6 is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6 for street driving as well, even though Carbotech doesn't recommend street driving with AX6 due to possible elevated levels of dust and noise. AX6 is NOT recommended as a race compound in most applications. Carbotech XP8 A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotech XP8 is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotech does NOT recommended XP8 as a daily driven street pad due to elevated levels of dust and noise. Carbotech XP8 is a great compound on the front & rear of most open wheel and sports racers. Carbotech XP10 When Carbotech unleashed the XP10 to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10 has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10 still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotech compounds so successful. Carbotech XP10 is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech XP12 Another highly successful XP series compound with an excellent initial bite, torque and fade resistance over and above the XP10 compound. XP12 has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12 has that excellent Carbotech release and modulation that has made all other Carbotech compounds so successful. The XP12 is more rotor aggressive than XP10 , but compared to the competition the XP12 is still very rotor friendly. XP12 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech CT961 Brake Pads Fitment: 2002 MITSUBISHI LANCER EVOLUTION (2002) 2003 INFINITI G35 BREMBO BRAKES (2003) 2003 MITSUBISHI LANCER EVOLUTION (2003) 2003 MITSUBISHI LANCER MR485499 (2003) 2003 MITSUBISHI LANCER EVOLUTION ALL (2003) 2003 NISSAN 350Z WITH BREMBO BRAKES (2003) 2003 NISSAN 350Z ENTHUSIAST W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2003) 2003 NISSAN 350Z GRAND TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2003) 2003 NISSAN 350Z TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2003) 2003 NISSAN 350Z TRACK W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2003) 2004 INFINITI G35 RWD - BREMBO BRAKES (2004) 2004 MITSUBISHI LANCER EVOLUTION (2004) 2004 MITSUBISHI LANCER MR485499 (2004) 2004 MITSUBISHI LANCER EVOLUTION ALL (2004) 2004 NISSAN 350Z WITH BREMBO BRAKES (2004) 2004 NISSAN 350Z ENTHUSIAST W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2004) 2004 NISSAN 350Z GRAND TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2004) 2004 NISSAN 350Z TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2004) 2004 NISSAN 350Z TRACK W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2004) 2004 SUBARU IMPREZA WRX STI (2004) 2004 SUBARU IMPREZA WRX STI ALL (2004) 2005 MITSUBISHI LANCER EVOLUTION (2005) 2005 MITSUBISHI LANCER MR449086 (2005) 2005 MITSUBISHI LANCER EVOLUTION ALL (2005) 2005 MITSUBISHI LANCER EVOLUTION MR ALL (2005) 2005 MITSUBISHI LANCER EVOLUTION RS ALL (2005) 2005 NISSAN 350Z WITH BREMBO BRAKES (2005) 2005 NISSAN 350Z ENTHUSIAST W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2005) 2005 NISSAN 350Z GRAND TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2005) 2005 NISSAN 350Z TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2005) 2005 NISSAN 350Z TRACK W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2005) 2005 SUBARU IMPREZA WRX STI (2005) 2006 MITSUBISHI LANCER EVOLUTION (2006) 2006 MITSUBISHI LANCER MR485499 (2006) 2006 MITSUBISHI LANCER EVOLUTION ALL (2006) 2006 MITSUBISHI LANCER EVOLUTION MR ALL (2006) 2006 MITSUBISHI LANCER EVOLUTION RS ALL (2006) 2006 MITSUBISHI LANCER EVOLUTION SE ALL (2006) 2006 NISSAN 350Z WITH BREMBO BRAKES (2006) 2006 NISSAN 350Z ENTHUSIAST W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2006) 2006 NISSAN 350Z GRAND TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2006) 2006 NISSAN 350Z TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2006) 2006 NISSAN 350Z TRACK W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2006) 2006 SUBARU IMPREZA WRX STI (2006) 2007 MITSUBISHI LANCER MR485499 (2007) 2007 NISSAN 350Z WITH BREMBO BRAKES (2007) 2007 NISSAN 350Z ENTHUSIAST W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2007) 2007 NISSAN 350Z GRAND TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2007) 2007 NISSAN 350Z TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2007) 2007 NISSAN 350Z TRACK W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2007) 2007 SUBARU IMPREZA WRX STI (2007) 2007 SUBARU IMPREZA WRZ STI LIMITED ALL (2007) 2008 NISSAN 350Z WITH BREMBO BRAKES (2008) 2008 NISSAN 350Z ENTHUSIAST W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2008) 2008 NISSAN 350Z GRAND TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2008) 2008 NISSAN 350Z TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2008) 2008 NISSAN 350Z TRACK W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2008) 2008 SUBARU IMPREZA WRX STI (2008) 2008 SUBARU IMPREZA WRX STI ALL (2008) 2009 NISSAN 350Z ENTHUSIAST W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2009) 2009 NISSAN 350Z GRAND TOURING D4060CD01B (2009) 2009 NISSAN 350Z GRAND TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2009) 2009 NISSAN 350Z TOURING W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2009) 2009 NISSAN 350Z TRACK W/BREMBO BRAKES AND 18 IN. WHEELS ALL (2009) 2009 SUBARU IMPREZA WRX STI (2009) 2009 SUBARU IMPREZA WRX STI ALL (2009) 2010 SUBARU IMPREZA WRX STI (2010) 2010 SUBARU IMPREZA WRX STI ALL (2010) 2011 SUBARU IMPREZA WRX STI (2011) 2011 SUBARU IMPREZA WRX STI ALL (2011) 2012 SUBARU IMPREZA WRX STI (2012) 2012 SUBARU IMPREZA WRX STI ALL (2012) 2013 SUBARU IMPREZA WRX STI (2013) 2013 SUBARU IMPREZA WRX STI ALL (2013) 2014 SUBARU IMPREZA WRX STI (2014) 2014 SUBARU IMPREZA WRX STI ALL (2014) 2015 SUBARU WRX STI 26696FG000 (2015)
Carbotech CT1134 Brake Pads Porsche 997-987-991-981 Rear
Carbotech Brakes Carbotech CT1134 Brake Pads Porsche 997-987-991-981 Rear from $164.00
Carbotech CT1134 Brake Pads Porsche 997/987/991/981 Rear Brake Pads Carbotech Race and Track Pads CT 1134 is a popular Porsche 997, 991, 981 981 Cayman and Boxster rear pad. Measuring 16mm thick and available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer part number: CT1134 Most popular track combination: R10 Front, R8 Rear G-Loc cross reference: GP1134 Hawk cross reference: HB665._577 Material thickness of pad of backing plate and pad material: .577" Material thickness of pad of backing plate and pad material: 15mm Carbotech Brake Compounds Carbotech 1521 The Carbotech 1521 is our high performance street compound. The 1521 compound is known for its release and modulation, along with unmatched rotor friendliness. 1521 is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech 1521 operating range starts out at ambient and goes up to 800F (426C+). 1521 is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotech 1521 is NOT recommended for ANY track use. Carbotech AX6 The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotech XP8 A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F.
Carbotech Dynapro Low Profile Caliper Brake Pads CTW4812
Carbotech Brakes Carbotech Dynapro Low Profile Caliper Brake Pads CTW4812 from $160.00
Carbotech Dynapro Caliper Brake Pads CTW4812 (Low Profile) Fitting many Wilwood Dynapro caliper fitments and nick-named the "Dynapro Low Profile", the Carbotech CTW4812 brake pad set is available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer Part Number: CTW4812 Most popular track combination: XP10 Front, XP8 Rear G-Loc cross reference: GP4812 Wilwood cross reference: 150-11363K, 150-14355K, 150-14356K Material thickness of pad of backing plate and pad material: .490" Material thickness of pad of backing plate and pad material: 12mm [img-13001-left-large_default] Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. [img-13001-left-large_default]
Carbotech FRS-BRZ-GT86 w- Brembo Package Front Brake Pad Set CT929
Carbotech Brakes Carbotech FRS-BRZ-GT86 w- Brembo Package Front Brake Pad Set CT929 from $139.00
Carbotech FRS/BRZ/GT86 w/ Brembo Package Front Brake Pad Set Carbotech brake pads for the front of Subaru BRZ, Scion FRS, or Toyota GT86 with the Brembo package. AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer Part Number: CT929 Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F.

© 2014-2022 DiscoveryParts