Stilo
Stilo ST5 Top Ram Air Vent Kit
$52.53
Stilo ST5 Top Ram Air Vent Kit
Force cool air into your helmet with The Stilo ST5 Top Ram Air Vent Kit . Every formula car, open wheel and kart racer puts this hi-impact ABS clear ram air vent on. Does it work? Just jump out of the draft and feel the rush of cool air as you make that offline last corner pass.
Stilo ST5 Top Ram Air Vent Kit Details:
Manufacturer: Stilo
Manufacturer part number: YA0822
Qty in kit: two (sold as a pair)
Material: Impact Plastic
Attaches how: 3M VHB 2 Sided Tape
Fits all Stilo ST5 Helmets: Yes
Fits Stilo ST4 Helmets: No, Use Stilo YA0620 ST4 Ram Air Intake Kit
For those customers in open cockpit cars, some additional aerodynamics may be desired by the driver. We offer a Top air vent to help move the cool air into the helmet, a rear spoiler for stability and slight downforce, as well as a vent blockoff kit to allow for more control of the airflow inside the helmet.
All pieces are made of clear plastic, and easily adhere with double-sided adhesive tape (pre-installed).
Stilo
Stilo ST5 Front Spoiler Kit
$52.53
Stilo ST5 Front Spoiler Kit
For Open Cockpit Racers, The Stilo ST5 Front Spoiler stabilizes your helmet and stops buffeting and lifting at high speeds. Used in WKA kart racing to compensate for the extreme upright seats some kart racers have.
For those customers in open cockpit cars, some additional aerodynamics may be desired by the driver. We offer a front spoiler to help split air around the helmet. No more helmet lifting and instability under the highest speeds in a car with questionable driver aero.
All pieces are made of clear plastic, and adhere with double-sided adhesive tape.
Stilo ST5 Front Spoiler Kit Details:
Manufacturer: Stilo
Manufacturer part number: YA0823
Reduce Helmet Buffeting
Removable
Fits All Stilo ST5 Models
Can be painted
Roux Helmets
Roux Peak Visor White Fits Roux R-1 Helmets
$50.00
Roux Peak Visor White Fits Roux R-1 Helmets
Analogous to the brim of a hat, peak visors are designed to keep the sun out of your eyes. Roux peak visors will fit your your Roux R-1 Helmet perfectly.
Roux Peak Visor White, Fits Roux R-1 Helmets Details:
Manufacturer: Roux
Manufacturer part number: RXHS05-15G00
Color: Gloss White
Roux hardware kit ROU-RXHS07-15D is required to install this peak visor
Roux Helmets
Roux Peak Visor Silver Fits Roux R-1 Helmets
$50.00
Roux Peak Visor Silver Fits Roux R-1 Helmets
Analogous to the brim of a hat, peak visors are designed to keep the sun out of your eyes. Roux peak visors will fit your your Roux R-1 Helmet perfectly.
Roux Peak Visor Silver, Fits Roux R-1 Helmets Details:
Manufacturer: Roux
Manufacturer part number: RXHS05-15444
Color: Silver
Roux hardware kit ROU-RXHS07-15D is required to install this peak visor
[img-6519-left-large_default]
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Stilo
Stilo Pivot Kit ST5 Shield Only Gold
$49.95
$64.95
Stilo ST5 Shield Pivot Kit In Gold
Stilo ST5 replacement shield pivot kit for all Stilo ST5 helmets in gold. This is the same pivot kit that came standard on all Stilo ST5 Composite, Offshore, Carbon, 8860 and 8860 Zero helmets but with deep gold anodizing. Comprising of both the special Stilo knurled pivot screw and machined washer, this kit will stop the "drooping visor" that may happen after years of racing.
Stilo ST5 Pivot Kit For Shield Only in Gold Details:
Manufacturer: Stilo
Manufacturer part number: YA0817G
Fitment: Stilo ST5 all versions
Color: Gold
[img-10740-left-large_default]
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Stilo
Stilo Pivot Kit ST5 Shield Only Blue
$49.95
$64.95
Stilo ST5 Shield Pivot Kit In Blue
Stilo ST5 replacement shield pivot kit for all Stilo ST5 helmets in blue. This is the same pivot kit that comes standard on all Stilo ST5 Composite, Offshore, Carbon, 8860, and 8860 Zero helmets but with deep blue anodizing. Comprised of both the special Stilo knurled pivot screw and machined washer, this kit will stop the "drooping visor" that may happen after years of racing.
Stilo ST5 Pivot Kit For Shield Only in Blue Details:
Manufacturer: Stilo
Manufacturer part number: YA0817B
Fitment: Stilo ST5 all versions
Color: Blue
[img-10741-left-large_default]
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Stilo
Stilo Pivot Kit ST5 Shield Only Aluminum
$49.95
$64.95
Stilo ST5 Shield Pivot Kit In Aluminum
Stilo ST5 replacement shield pivot kit for all Stilo ST5 helmets in natural aluminum. This is the same pivot kit that came standard on all Stilo ST5 Composite, Offshore, Carbon, 8860 and 8860 Zero helmets. Comprising of both the special Stilo knurled pivot screw and machined washer, this kit will stop the "drooping visor" that may happen after years of racing.
Stilo ST5 Pivot Kit For Shield Only in Aluminum Details:
Manufacturer: Stilo
Manufacturer part number: YA0817
Fitment: Stilo ST5 all versions
Color: Natural Aluminum
Roux Helmets
Roux Top Forced Air Adapter
$49.00
Roux Top Forced Air Adapter
Now you can easily attach your helmet blower to your Roux Helmet with the Roux Helmet Top Forced Air Adapter. Easily install your helmet top air adapter with the enclosed mini-screws and enjoy a shield that never fogs and keeps your head even cooler. Roux top forced air adapter the lightweight and the prefect addition to your Roux helmet.
Roux Top Forced Air Adapter Details:
Manufacturer: Roux
Manufacturer part number: RXHI01-15888
Color: Clear
Screws included: Yes
Hose barb shape: Oval
[img-6514-left-large_default]
[img-6513-left-large_default]
NecksGen
Sparco Helmet kit AIR/SKY
$45.00
Replacement hardwares for our Air Pro and Sky RF full face helmets
Air/Sky Helmet Visor Fastener Kit by Sparco .This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship.Manufactured from industry-leading ...
Rigorously tested to withstand years of abuse
Built for maximum strength and endurance
Designed and manufactured using innovative technologies
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Stilo
Stilo Ear Pillows for ST4 and ST5
$34.95
$49.95
Stilo Ear Pillows for ST4 and ST5
Stilo Spare Ear Pillows for ST4 and ST5
Details:
Manufacturer: Stilo
Manufacturer new part number: YA0016
Fitment: All ST4 and ST5 helmets
Stilo
Stilo Seal Visor Rubber ST5, ST4 F and ST4 GTW
$29.95
Stilo Seal Visor Rubber ST5, ST4 F and ST4 GTW
Replacement rubber seal For your Stilo helmet visor that fits ST5, ST4 F and ST4 GTW style helmets. This Genuine Stilo part fits the eyeport seal of all modern Stilo full face helmets.
Stilo Seal Visor Rubber ST5, ST4 F and ST4 GTW Details:
Manufacturer: Stilo
Manufacturer part number: YA0660
Fitment: ST4F All Models, ST4W All Models, Stilo ST5 Models, Trophy and WRC, SA2010, SA2015, FIA 8858, FIA 8859, FIA 8860
In general, YA0660 is the eye port rubber for all ST5 except ABP. YA0874 can be used on all helmets both auto and karting.
Bell
Bell Forced Air Adaptor QL Nozzle 90°
$29.95
Bell Forced Air Adaptor QL Nozzle 90°
Bell's forced air helmets feature the new Quick Lock forced air nozzle that locks the forced air connector in place and allows for easy release when it's time to leave the vehicle.
Bell Forced Air Adaptor QL Nozzle 90° Details:
Manufacturer: Bell
Manufacturer Global part number: 2070067
Manufacturer old part number 2029001
Angle: 90
Material: Soft
The smaller nozzle design helps accelerate airflow into the helmet with more force. The Quick Lock nozzle can be used with traditional 1.5 inch diameter forced air hoses by using the air adaptor kits that connect the hose with the Bell Quick Lock nozzle.
This Bell part also connects to the Stilo New Style Top Air Adapter perfectly.
Bell
Bell Forced Air Adaptor QL Nozzle Straight
$29.95
Bell Forced Air Adaptor QL Nozzle Straight
Bell Helmets 2070066 Helmet Hose Adapter Small helmet fitting to large supply hose. This Bell Adapter attachment hose to air vents on Bell helmets. For use with the smaller 0.875" helmet air intake tubes.
This Bell part also connects to the Stilo New Style Top Air Adapter perfectly.
Bell Forced Air Adaptor QL Nozzle Straight Details:
Manufacturer: Bell
Big end I.D. 1.3225" & Big end O.D. 1.6230"
Small end I.D. .8750" & Small end O.D. .9915"
Manufacturer US part number: BR-2029000
Manufacturer Global part number: 2070066
Color: Black
Material: Synthetic hi-temp
Stilo
Stilo Bottom Rubber Trim for ST5, CMR, and KRT
$12.50
Stilo Bottom Rubber Trim for ST5, CMR, and KRT
Did you put your Stilo helmet on your Hans device then then in your helmet bag? After a while, the Hans grip material will start to wear through the Stilo bottom rubber seal. One way to prevent this is to place a towel between your Hans device and your helmet so keep the abrasion to a minimum. If you have not been doing this, the this Stilo Replacement Rubber Seal For the Bottom of Your Stilo Helmet is the fix. Fits all Stilo SA2010 and SA2015 helmets. This is a Genuine Stilo Part for a perfect fit.
Stilo Bottom Rubber Trim for ST5, CMR, and KRT Details:
Manufacturer: Stilo
Manufacturer new part number: YA0874
Fitment: ST5, CMR and KRT Helmets
In general, YA0660 is the eye port rubber for all ST5 except ABP. YA0874 can be used on all helmets both auto and karting.
Molecule
Molecule Wash & Spot Cleaner Kit 4oz ea
$11.95
Molecule SaRefresh/Wash Kit 4oz ea
Save some money and try both. Molecule Nomex Suit Wash Effectively Cleans Nomex Fabric (and other technical fabrics) in standard washing machines. It is formulated specifically for the critical requirements of Nomex racing suits. It is expressly designed to remove the unique oils, fuel, and soils that are often encountered in the racing environment.
Molecule Sample Kit-Refresh/Wash 4oz ea Details:
Manufacturer: Molecule Labs
Manufacturer part number: MSAK-442
Molecule Wash: 4oz
Molecule Spot Cleaner: 4oz
Concentrated formula effectively cleans technical fabrics in standard washing machines
Removes contaminants that can degrade fabric performance
Contains an antimicrobial agent to inhibit the growth of bacterial odors
Maintains fabric breathability
Contains a fabric brightener to help you look your best
Recommended for Nomex® and other technical fabrics
[img-14452-left-large_default]
Molecule Refresh keeps your suits and helmets clean and fresh over long racing weekends and between washings. This spray is designed to reduce odors on all technical fabrics and contains an anti-microbial agent that inhibits the growth of bacterial odors. Molecule Labs Refresher has a light, fresh scent and contains skin-friendly ingredients.
Motor sports injuries have decreased in recent years, thanks to improvements in the quality of protective gear. But despite driver and industry precautions, racing is still a dangerous sport.
Exposure to a flash fire for even a few seconds can lead to serious injury or loss of life. Severe skin burns occur more often than they should because protective clothing is not properly cared for or has not been made resistant to flammable liquids.
Racing suits made from Nomex® technical fabric have extraordinary properties to protect drivers from flames and heat. Care instructions published by Nomex® manufacturer DuPont state that this unique fabric requires special care to be fully effective.
DuPont's laundering guide cautions Nomex® users that the fabric must be kept clean. "Flame resistance can be compromised by the presence of flammable contaminants on the garment, " the guide explains.
However, DuPont advises against using ordinary soaps for removing these contaminants. "Soap scums may be flammable and could adversely affect the thermal ensure safety and comfort.
Molecule is the right way to care for Nomex. Molecule Wash effectively cleans Nomex® fabric in standard washing machines. Removes contaminants that can degrade fabric performance. Antimicrobial agent inhibits the growth of bacterial odors.
Dissolve and suspend tough spots and stains that can create combustible hot spots with Molecule Spot Cleaner. This cleaner is a concentrated formula that penetrates deeply into Nomex and technical fabrics to safely dissolve embedded spots and stains.
Molecule Protector spray extends the effectiveness of your clean firesuit. Protector spray bonds to Nomex fabric to help reduce flammable stains from oil, grease, fuel, dirt, and other contaminants that may compromise the efficiency of your racing suit. Armor your suit with Simpson Molecule Protector spray.
Do you have a long race weekend coming up? Molecule Refresh spray revives your suit for another day at the track. Molecule Refresh contains an antimicrobial agent to inhibit the growth of bacterial odors and has a light, fresh scent. It's formulated with cosmetic-grade, skin-friendly ingredients and maintains fabric breathability. You can even use it on helmet liners and gloves. Can't wash your suit? Freshen it up with Simpson Molecule Refresh spray.
Molecule works and has been tested with Nomex, CarbonX, Proban, Fire retardant cotton and all technical fabrics.
[img-14452-left-large_default]
Molecule SaRefresh/Wash Kit 4oz ea
Save some money and try both. Molecule Nomex Suit Wash Effectively Cleans Nomex Fabric (and other technical fabrics) in standard washing machines. It is formulated specifically for the critical requirements of Nomex racing suits. It is expressly designed to remove the unique oils, fuel, and soils that are often encountered in the racing environment.
Molecule Sample Kit-Refresh/Wash 4oz ea Details:
Manufacturer: Molecule Labs
Manufacturer part number: MSAK-442
Concentrated formula effectively cleans technical fabrics in standard washing machines
Removes contaminants that can degrade fabric performance
Contains an antimicrobial agent to inhibit the growth of bacterial odors
Maintains fabric breathability
Contains a fabric brightener to help you look your best
Recommended for Nomex® and other technical fabrics
Molecule Refresh keeps your suits and helmets clean and fresh over long racing weekends and between washings. This spray is designed to reduce odors on all technical fabrics and contains an anti-microbial agent that inhibits the growth of bacterial odors. Molecule Labs Refresher has a light, fresh scent and contains skin-friendly ingredients.
Motor sports injuries have decreased in recent years, thanks to improvements in the quality of protective gear. But despite driver and industry precautions, racing is still a dangerous sport.
Exposure to a flash fire for even a few seconds can lead to serious injury or loss of life. Severe skin burns occur more often than they should because protective clothing is not properly cared for or has not been made resistant to flammable liquids.
Racing suits made from Nomex® technical fabric have extraordinary properties to protect drivers from flames and heat. Care instructions published by Nomex® manufacturer DuPont state that this unique fabric requires special care to be fully effective.
DuPont's laundering guide cautions Nomex® users that the fabric must be kept clean. "Flame resistance can be compromised by the presence of flammable contaminants on the garment, " the guide explains.
However, DuPont advises against using ordinary soaps for removing these contaminants. "Soap scums may be flammable and could adversely affect the thermal ensure safety and comfort.
Molecule is the right way to care for Nomex. Molecule Wash effectively cleans Nomex® fabric in standard washing machines. Removes contaminants that can degrade fabric performance. Antimicrobial agent inhibits the growth of bacterial odors.
Dissolve and suspend tough spots and stains that can create combustible hot spots with Molecule Spot Cleaner. This cleaner is a concentrated formula that penetrates deeply into Nomex and technical fabrics to safely dissolve embedded spots and stains.
Molecule Protector spray extends the effectiveness of your clean firesuit. Protector spray bonds to Nomex fabric to help reduce flammable stains from oil, grease, fuel, dirt, and other contaminants that may compromise the efficiency of your racing suit. Armor your suit with Simpson Molecule Protector spray.
Do you have a long race weekend coming up? Molecule Refresh spray revives your suit for another day at the track. Molecule Refresh contains an antimicrobial agent to inhibit the growth of bacterial odors and has a light, fresh scent. It's formulated with cosmetic-grade, skin-friendly ingredients and maintains fabric breathability. You can even use it on helmet liners and gloves. Can't wash your suit? Freshen it up with Simpson Molecule Refresh spray.
Molecule works and has been tested with Nomex, CarbonX, Proban, Fire retardant cotton and all technical fabrics.