AiM 4-Port CAN Data Hub for AiM MXL, EVO3, EVO4
Extend The Capabilities Of Your AiM Solo DL, Solo 2 DL, MXS, MXG, MXL, Pista / Pro Data Logger without occupying any more channels or running more cables to your dash. AiM 4-Port CAN Data Hub connects up to four CAN peripherals to each Data Hub. AiM 4-Port CAN Data Hub connects up to four CAN peripherals to each Data Hub. You can even "stack" Data Hubs, connecting up to four more hubs to each hub, multiplying the number of available connections!
Accepts any AiM CAN accessory, including GPS, LCU-One Lambda Controller, Memory Key, or TC (Thermocouple) Hubs. Any channel can be selected for display on the dash. 15" cable.
- AiM 4-Port CAN Data Hub for AiM MXG, MXS, & Pista Details:
- Manufacturer: AiM
- Manufacturer part number: X08HUB010
- Manufacturer alternate part number: MC-329
- Connector 1: 712 Male (to dash)
- Connector 2/3/4/5: 712 Female (from SmartyCams or other CAN appliances)
This allows you to add multiple SmartyCams to your AiM system.
A V-8 engined car with EGT on every cylinder, two CHTs on each cylinder bank, one Lambda sensor on each cylinder bank, GPS, and a Memory Key would need three TC Hubs and two Data Hubs. The EGT and CHT thermocouples would all connect to the three TC Hubs. The TC Hubs and the GPS can all be connected to one Data Hub. That Data Hub would be connected, along with the two Lambda controllers and Memory Key, to a second Data Hub which would be connected to the dash or data logger. Sixteen channels are monitored in addition to the channels still available in the dash or data logger!