Harness Pads & Hardware

CMS Performance Harness Install Kit For C7 Corvette This Product Fits The Following Cars: Chevrolet Corvette Stingray & Z51, C7 (2014-2019) Chevrolet Corvette Z06, C7 (2015-2019) Quick and Easy Installation of Harness Lap Belts in the C7 Corvette The CMS Performance Harness Install Kit for the C7 Corvette provides two strong, secure anchors for the lap belts of your racing harness using the factory seats of your C7 Corvette. Each CMS Performance C7 Corvette Harness Install Kit is for one seat (driver or passenger side, the kit works on either seat). Ordering two kits saves you $25 overall and you can install a harness for your passenger or instructor. CMS Performance is 100% Designed and Built in the USA All CMS Performance products are designed, constructed, and finished in our USA manufacturing and powder coating facility. The CMS Performance C7 Corvette Harness Install Kit is CNC cut and fully TIG-welded from high-strength stainless steel, then powder coated a rich satin black to blend seamlessly into your interior when you don't have harnesses installed. Complete detailed instructions make installation straightforward (figure about an hour if you're reasonably handy). Click here for installation instructions. For the C7 Corvette, we recommend the Schroth Profi II ASM or Sabelt Steel Series four-point harnesses for use with this kit. Schroth's proprietary Anti-Submarine (ASM) technology was developed specifically for use in street cars like the C7 Corvette without a sub strap a pass-through in the seats. Sabelt's four point Steel Series offers an alternative that gives you a significant safety upgrade at a reasonable price! CMS Performance Harness Install Kit Details: Manufacturer: CMS Performance manufacturer Part: Harninstall-C7 Construction: 360o TIG welded stainless steel Finish: Satin black powder coat Designed, manufactured, and powder coated by CMS Performance in the USA This product is intended for off-road use only.

CMS Performance Harness Install Kit For C8 Corvette This Product Fits The Following Cars: Chevrolet Corvette Stingray & Z51, C8 (2020+) Chevrolet Corvette Z06, C8 (2023+) Quick and Easy Installation of Harness Lap Belts in the C8 Corvette The CMS Performance Harness Install Kit for the C8 Corvette provides two strong, secure anchors for the lap belts of your racing harness using the factory seats of your C8 Corvette. The kit is typically used along with the CMS Performance C8 Harness Bar or Deluxe C8 Harness Bar. Together they give C8 Corvette driving enthusiasts an elegant, secure way to use a racing harness. Each CMS Performance C8 Corvette Harness Install Kit is for one seat (driver or passenger side, the kit works on either seat). Ordering two kits now, you save $25 and you can install a harness for your passenger or instructor. CMS Performance is 100% Designed and Built in the USA All CMS Performance products are designed, constructed, and finished in our USA manufacturing and powder coating facility. The CMS Performance C8 Corvette Harness Install Kit is CNC cut and fully TIG-welded from high-strength stainless steel, then powder coated a rich satin black to blend seamlessly into your interior when you don't have harnesses installed. Complete detailed instructions make installation straightforward (figure about an hour if you're reasonably handy). Click here for installation instructions. For the C8 Corvette, we recommend the Schroth Profi II ASM Harness for use with this kit. Schroth's proprietary Anti-Submarine (ASM) technology was developed specifically for use in street cars like the C8 Corvette that don't have a pass-through in the seat cushions to accommodate the sub straps of a six-point racing harness. CMS Performance Harness Install Kit Details: Manufacturer: CMS Performance manufacturer Part: Harninstall-C8 Construction: 360o TIG welded stainless steel Finish: Satin black powder coat Designed, built, and powder coated in the USA This product is intended for off-road use only.

CMS Performance Harness Install Kit For Gen 6 Camaro This Product Fits The Following Cars: Chevrolet Camaro Coupe, all (2016+) Quick, Easy Installation of Harness Lap Belts in the Gen 6 Camaro The CMS Performance Harness Install Kit for the Gen 6 Camaro provides two strong, secure anchors for the lap belts of your racing harness using the factory seats of your Gen 6 Camaro. Each CMS Performance Gen 6 Camaro Harness Install Kit is for one seat (driver or passenger side, the kit works on either seat). Ordering two kits saves you $25 overall and you can install a harness for your passenger or instructor. CMS Performance is 100% Designed and Built in the USA All CMS Performance products are designed, constructed, and finished in our USA manufacturing and powder coating facility. The CMS Performance Gen 6 Camaro Harness Install Kit is CNC cut and fully TIG-welded from high-strength stainless steel, then powder coated a rich satin black to blend seamlessly into your interior when you don't have harnesses installed. Complete detailed instructions make installation straightforward (figure about an hour if you're reasonably handy). Click here for installation instructions. For the Gen 6 Camaro, we recommend the Schroth Profi II ASM or Sabelt Steel Series four-point harnesses for use with this kit. Schroth's proprietary Anti-Submarine (ASM) technology was developed specifically for use in street cars like the Gen 6 Camaro without a sub strap a pass-through in the seats. Sabelt's four point Steel Series offers an alternative that gives you a significant safety upgrade at a reasonable price! CMS Performance Harness Install Kit Details: Manufacturer: CMS Performance manufacturer Part: Harninstall-G6C Construction: 360o TIG welded stainless steel Finish: Satin black powder coat Designed, manufactured, and powder coated by CMS Performance in the USA This product is intended for off-road use only.

CMS Performance Sub Strap + Lap Belt Mount for BMW This Mount Fits All Sub-Models Of Current BMW Cars The Best Way to Mount Harness Lap and Sub Belts in Your BMW  The CMS Performance Sub Strap + Lap Belt Mount is designed to be installed and used with your factory BMW seats, giving you strong, secure mounting points for your racing harness lap- and sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original BMW mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap + Lap Belt Mount provides an extremely strong structure to which you can clip or bolt your harness lap belts and wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap + Lap Belt Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap + Lap Belt Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap + Lap Belt Mount for BMW Details: Manufacturer: CMS Performance Manufacturer part no.: CMSP-SS-BLACK-BMW Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

CMS Performance Sub Strap + Lap Belt Mount for GT350/GT350R/S550 This Mount Fits All Variants of the Following Cars: Ford Performance Shelby GT350 (2015-2020) Ford Performance Shelby GT350R (2016-2020) Ford Performance Shelby GT500 (2021+) Ford S550 Mustang GT (2015-2023) The Best Way to Mount Harness Lap and Sub Belts in Your Shelby Mustang The CMS Performance Sub Strap + Lap Belt Mount is designed to be installed and used with your factory Ford Performance seats, giving you strong, secure mounting points for racing harness lap- and sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original Ford mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap + Lap Belt Mount provides an extremely strong structure to which you can clip or bolt your harness lap belts and wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap + Lap Belt Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap + Lap Belt Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap + Lap Belt Mount Details: Manufacturer: CMS Performance Manufacturer part no.: CMS-SL-003 Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

CMS Performance Sub Strap + Lap Belt Mount for Toyota GR Supra/GR86 This Mount Fits All Variants of the Following Cars: Toyota GR Supra A90/A91 (2019+) Toyota GR86 (2021+) The Best Way to Mount Harness Lap and Sub Belts in Your GR Supra or GR86 The CMS Performance Sub Strap + Lap Belt Mount is designed to be installed and used with your factory Toyota seats, giving you strong, secure mounting points for racing harness lap- and sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original seat mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap + Lap Belt Mount provides an extremely strong structure to which you can clip or bolt your harness lap belts and wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap + Lap Belt Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap + Lap Belt Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap + Lap Belt Mount Details: Manufacturer: CMS Performance Manufacturer part no.: CMS-SL-005 Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

CMS Performance Sub Strap Mount for Corvette C8 This Mount Fits All Variants of the Following Cars: Chevrolet Corvette C8  Chevrolet Corvette C8 Z51 Chevrolet Corvette C8 Z06 Chevrolet Corvette C8 ZR-1 The Best Way to Mount Harness Lap and Sub Belts in Your C8 Corvette The CMS Performance Sub Strap Mount is designed to be installed and used with your factory seats, giving you strong, secure mounting points for racing harness sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap Mount provides an extremely strong structure to which you can wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap Mount Details Manufacturer: CMS Performance Manufacturer Part Number: Harninstall-C8 Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

Sub Strap Mount for Porsche LWB   For cars with Porsche OEM CFRP Full Bucket ("Lightweight Bucket" or "LWB") Seats Only. FITMENT: 992 GT3/GT3RS 991.1 & .2 GT3/GT3RS 992 GT3/GT3RS 991.2 GT2RS 981 Cayman GT4 718 Cayman GT4 The Performance Sub Strap Mount is a must-have for Porsche GT2RS, GT3/GT3RS, and GT4 owners using five-, six-, or seven-point harnesses with the factory CFRP Full Bucket Seats (also called Lighweight Bucket Seats). Designed to easily bolt in using existing seat hardware without having to fully remove the seats from the car, the Performance Sub Strap Mount properly anchors your harness anti-submarine straps ("sub straps") to your seat base. The Performance Sub Strap Mount fits either driver- or passenger-side seats. Performance Sub Strap Mounts are designed, manufactured, and powder-coated entirely in-house in the USA. Made of solid steel while only weighing 1.4 lbs (625g), there's not a stronger, more affordable solution available. The Sub Strap Mounts allow full seat adjustment, fore/aft and up/down, while maintaining the ideal sub strap angle to your body for maximum safety.     FEATURES: Solid steel construction for maximum safety Allows full fore/aft and up/down seat adjustment Powder-coated to match OEM seat base Fits driver or passenger seat (Porsche LWB only) Simple to install Compatible with OEM seat belt and airbag hardware

Harness Belt Roll Bar Guide Clamp Keep your shoulder belts or head containment net straps in place with our heavy duty but lightweight aluminum 2 piece harness guide clamp that fits 1.5" and 1.75" roll bars perfectly. Harness Belt Roll Bar Guide Clamp Details: Manufacturer: DiscoveryParts Manufacturer part number 1.5": RB-COLLAR-AL15-BLK Manufacturer part number: 1.75": RB-COLLAR-AL175-BLK Material: Steel Finish: Black oxide Keeps your belts or cage nets in place, assisting in protection in a multiple impact. 2 Piece design makes installation easy Assists in perfect belt geometry Smooth radius on all edges so no scrapes or cuts when working in the area Sold in qty one each Perfectly sized to fit all roll bars with either 1.75" or 1.50" harness cross-bars. Precision-machined roll bar harness collars help keep your harness shoulder straps in exactly the right place on your roll bar. Easy to install double-split collars with high-strength Allen bolt hardware, they are available in satin black powder-coated aluminum.

7/16" eye bolt to attach harness snap-hook fittings.

Sabelt 2 Inch Harness Pads Sabelt 2-inch harness pads offer additional padding for your harness shoulder straps, with easy-to-use Velcro closure. Sold in pairs.

Schroth B23A Bendable Harness Snap End Kit Schroth B23A harness ends are bendable and make racing harnesses easier where there is very little clearance. The Schroth B23A bendable snap-on harness adapter lets you bolt one end to the chassis, bend it to the needed shape, and attach your harness snap end. Schroth B23A Bendable Harness Snap End Kit Details: Manufacturer: Schroth Manufacturer part number: B23A Manufacturer alternate part number: SR 01324 Bendable Fittings: Yes (2) Bolts: Yes (2) 7/16-24 Wavy Washers: Yes (2) Combination Washers: Yes (2) The B23A End Fitting Kit is a set of bolt in brackets that are usually sewn into 2" Lap belts. Schroth slang calls it a "Rallye End" kit because it usually comes on the street legal Rallye style belts. Like the 01323 kit, it is designed to be bent. These pieces are commonly used in Porsche applications where space for an Eye bolt is insufficient. This bracket can be bolted to the car, then bent so that a Snap-In bracket can be used to fix the harness to the bracket. We use Schroth B23A brackets in many applications where stock mounting locations do not leave sufficient space, or if the thread pitch is different from the eye bolts. If you have a Miata, S2000 or are putting a large/very large seat in a full interior car this is the harness mount kit you want.

Schroth Harness Adjuster Grips Schroth's street legal harnesses have loops sewn into the end of each adjusting strap. Schroth Harness Adjuster Grips are customized high-impact plastic dowels that go through those loops, giving you a firmer grip when adjusting the belts. This is especially an advantage when temperatures are high and hands get sweaty, or when you're wearing racing gloves. Schroth Harness Adjuster Grips make it easier to get your harness belts as tight as they should be. Priced/sold as a set of four, enough for one street legal harness. SCHROTH HARNESS ADJUSTER GRIP DETAILS Manufacturer: Schroth Manufacturer part number:00092 Material: high-impact plastic Color: black Contents: four harness adjuster grips Harness not included.

Schroth Reinforcement Plates 7/16" x 20TPI Schrtoth SG39 reinforcement plates, also called back-up plates by many chassis builders, are used when reinforcing a harness mount point when the location has not been engineered by the auto manufacturer. Any time you mount a harness to sheet metal, you will need to put a reinforcement plate under it to keep it from ripping out of the floor. Schroth Racing SG39 Reinforcement Plate Details: Manufacturer: Schroth Manufacturer part number: SG39 Length: 3.25" Width: 2" Welded Nut Size/Pitch: 7/16 x 20TPI Finish: Zinc Plated Material: Steel Quantity in kit: 1 Schroth 7/16" x 20TPI Reinforcement Back-Up Plates make for a perfect harness install. This Schroth back-up plate measures 3.25" long x 2" wide with a 7/16 x 20 TPI nut welded to it. This is what comes with most Schroth harness sets to mount your harness eye bolt to. This back-up plate is what comes standard issue with most Schroth Racing Harness kits