Mounting Adapters & Sub Strap Mounts

Schroth Reinforcement Plates M10 Schrtoth SG55 reinforcement plates, also called back-up plates by many chassis builders, are used when reinforcing a harness mount point when the location has not been engineered by the auto manufacturer. Any time you mount a harness to sheet metal, you will need to put a reinforcement plate under it to keep it from ripping out of the floor. Schroth Racing SG55 Reinforcement Plate Details: Manufacturer: Schroth Manufacturer part number: SG55 Length: 3.25" Width: 2" Welded Nut Size/Pitch: M10 Finish: Zinc Plated Material: Steel Quantity in kit: 1 Schroth M8 Reinforcement Back-Up Plates make for a perfect harness install. This Schroth back-up plate measures 3.25" long x 2" wide with a M10 nut welded to it. This is what comes with most Schroth harness sets to mount your harness eye bolt to. This back-up plate is what comes standard issue with most Schroth Racing Harness kits

Schroth Reinforcement Plates M8 Schrtoth SG54 reinforcement plates, also called back-up plates by many chassis builders, are used when reinforcing a harness mount point when the location has not been engineered by the auto manufacturer. Any time you mount a harness to sheet metal, you will need to put a reinforcement plate under it to keep it from ripping out of the floor. Schroth Racing SG39 Reinforcement Plate Details: Manufacturer: Schroth Manufacturer part number: SG54 Length: 3.25" Width: 2" Welded Nut Size/Pitch: M8 Finish: Zinc Plated Material: Steel Quantity in kit: 1 Schroth M8 Reinforcement Back-Up Plates make for a perfect harness install. This Schroth back-up plate measures 3.25" long x 2" wide with a M8 nut welded to it. This is what comes with most Schroth harness sets to mount your harness eye bolt to. This back-up plate is what comes standard issue with most Schroth Racing Harness kits

Discovery Parts Seat Mounting Hardware Kit (4) 8x1.25 25mm Bolts (4) 8x1.25 16mm Bolts (4) 8x1.25 Locking Nuts (8) Washers Sparco Part Numbers: 50001 and 50002 - everything you need in one place!

Sparco 600 Series Seat Mounting Base Refer to the chart below for SKU and fitment Sparco 600 Series seat bases utilize the factory seat mounts on your car or trucks floor to provide a flat surface for mounting your Sparco racing seat. These racing seat bases are vehicle specific for an easy, bolt-in installation. The 600 Series Sparco racing seat bases are constructed with 3/16" thick steel to provide a strong flex-free mount. These racing seat bases are powder coated in a black wrinkle finish for a cleaner look. In addition to the mounting holes provided for standard bolt-on installation, the Sparco base has a wide metal platform to allow custom mounting of side mounts direct to the base (drilling required). This direct installation is an option for race vehicles where the lowest seat position is desired. Please note that these seat mounting bases are available for hundreds of vehicles. As such Discovery Parts cannot stock all makes/models/years and it could take up to 10 business days for your bracket to ship. FEATURES: 3/16" steel construction Wrinkle-finish powder coating Outer set mounting locations allow for wider side-mount racing seats Wide mounting surface allows direct mounting of side mounts (some drilling may be required) PROPER INSTALLATION OF SPARCO RACING SEAT REQUIRES THE FOLLOWING: (1) Seat base (600 series) (1) Side mount bracket set (steel or aluminum) (1) Side mounting hardware kit (50002) (1) Track set seat slider* (00493) *The Track Set allows for forward and backward adjustment of the seat, and is not certified. Check with your sanctioning body before installing. Copy the SKU from the chart below into the "Input Part Number" field above when adding to cart.