Racecar Parts - Batteries - Seats - Data Systems and more – Page 13

SPA Technique SPA Extreme Novec SFI Spare Fire Bottle 5lb $363.00

Spa Extreme Novec SFI 17.1 Fire System 5lb Spare Bottle SPA Technique Extreme Novec 1230 5LB SFI 17.1 certified spare bottle is a complete, ready-to-install, filled and charged 5-lbs. aluminum spare bottle with a mechanical lever valve. SPA Extreme Novec SFI 17.1 Spare Bottle 5lb Details: Manufacturer: SPA Technique Manufacturer part number: EX-SFI5-B Certification: SFI 17.1 Agent: Novec 1230 Toxic: No Conductive: No Clean-up required: No Bottle height: 13.75" Bottle diameter: 4.25" 3M Novec 1230 is not only safer for drivers and crew, but also safer for the environment. It's also non-conductive (i.e., safe for electronics) and leaves no residue to clean up. SPA Technique fire systems are the perfect choice for drivers that want the best in SFI 17.1 certified fire safety. This pressurized fire bottle can only be shipped via Ground.

SPA Technique SPA Dip Tube Assembly for LWE50 Electric Bottles $77.00

SPA Dip Tube Assembly for LWE50 Electric Bottles Not A User Serviceable Item Inside your Spa Technique LWE50 electrically discharged bottles there is a flexible pick-up tube with a weighted end. This is the "straw" that picks up your AFFF agent inside the bottle when discharged and will always find the lowest-gravity position in case your vehicle is other than right-side-up on track. SPA Dip Tube Assembly for LWE50 Electric Bottles Details: Manufacturer: SPA Technique Manufacturer part number: 02-SP-046 The SPA Dip Tube Assembly LWE50, part number 02-SP-046 is not a user-serviceable part as it is inside the sealed fire bottle. It is changed during a fire bottle service if shows any degradation or if the service time has been exceeded. The reason for this is AFFF hardens with age and gets lodged between the seal and mating surface. This will not allow proper sealing at 8 or 16 BAR.

SPA Technique SPA Dip Tube Assembly MFM75A & MFM400A $56.15

SPA Dip Tube Assembly MFM75 & MFM400A SPA Dip Tube Assembly for all MFM75A and MFM400A Series Aluminum Bottle Fire Systems. The Spa Technique 02-SP-047 is not a user servicable item and must be replaced by a Spa Technique authorized service center. This is the pick-up tube assembly with a weighted pick-up on the end that is internal of the bottle and is threaded into the discharge handle. SPA Dip Tube Assembly MFM75A & MFM400A Details: Manufacturer: Spa Technique Manufacturer part number: 02-SP-047 Fits: MFM75A and MFM400A Aluminum Bottles Fits any other SPA bottles: No

Image of Ferodo FCP4665H DS2500 Porsche 991 GT3, Turbo & 981 GT4 Rear Brake Pads

Ferodo Ferodo FCP4665H DS2500 Porsche 991 GT3, Turbo & 981 GT4 Rear Brake Pads $440.43

Ferodo FCP4665H DS2500 Porsche 991 GT3, Turbo & 981 GT4 Rear Brake Pads Fitting the Porsche 991 GT3, 991 Turbo & Cayman GT4 rear brake pads, The Ferodo FCP4665H in the DS2500 compound is one of the best street/track pads available. No need to change to track pads and then to street pads every weekend. Now enjoy linear high-torque braking on the best of mountain rides and mild track days. Ferodo FCP4665H DS2500 Details: Manufacturer: Ferodo Manufacturer part number: FCP 4664H-N Primary Use: Street Performance & Light Track Application: Touring Car, GT, Single Seat Average Coefficient of Friction: 0.41µ Working temperature range: 0 - 500 C Working temperature range: 32 - 932 F Ferodo DS2500 Brake Compound Details:The Ferodo DS2500 is the best hybrid street and track day pad available. Designed for driving on the street, mountain runs and light track day with a stable average friction coefficient of 0,41 over a wide working temperature range of 32 to 932 F, (0 to 500 C)Featuring a moderately high initial bite and the solid fade resistance of a trackpad, but with relatively low dust and noise levels of a street pad. When the Ferodo DS2500 is used as a street pad, it can produce some squeal on most vehicle platforms. The most common use of the Ferodo DS2500 is mountain runs, autocross, and some light track duty on street tires in colder temperatures.When used on track on heavy (3,000+ lbs.+) track cars with high horsepower and R Compound tires, the DS2500 pad wear rates tend to be considerably higher vs. Ferodo Racing's other compounds. Do not expect to win the WRL GTU class on Ferodo DS2500 brake pads, but it is the perfect dual purpose street and light track day pad. Ferodo FCP4665H DS2500 Rear Brake Pad Fitment: Porsche 991 GT3 Rear, Porsche 991 Turbo Rear, Porsche 981 GT4 Rear 2016 Porsche 911 Turbo Iron disc (F380x34, R380x30) 2016 Porsche Cayman GT4 Iron disc (F380x34, R380x30) 2015 Porsche 911 GT3, GT3 RS Iron disc (F380x34, R380x30) 2015 Porsche 911 Turbo Iron disc (F380x34, R380x30) 2015 Porsche Cayman GT4 Iron disc (F380x34, R380x30) 2016 Porsche 911 GT3, GT3 RS Iron disc (F380x34, R380x30) 2016 Porsche 911 R Iron Disc 2017 Porsche 911 Turbo Iron Disc (F380x34, R380x30) 2017 Porsche 991 GT3, GT3 RS Iron Disc (F380x34, R380x30) 2017 Porsche Cayman GT4 Iron Disc (F380x34, R380x30) 2018 Porsche 911 Turbo Iron Disc 2018 Porsche 911 Turbo S Iron Disc Porsche 991.2 GT3, GT3RS

SPA Technique SPA 1/8 NPT x 6mm 90-Degree Decabon Fitting $9.95

SPA Technique 1/8 NPT x 6mm 90º Fitting SPA 1/8 NPT to SPA 6mm Decabon 90-degree connector fitting for 6mm Decabon tubing used with SPA firing heads. If you need to install a firing head in a tight location, this is the way to do it correctly. SPA 6mm Straight Connector Details: Manufacturer: SPA Technique Manufacturer part number: SP-021-90 Trade name: 1/8 NPT x 6mm 90 Fitting Usage: Installing a firing head 90 degrees from 6mm tubing Can I run this SPA Technique 90 degree connector fitting with my aluminum line from another manufacturer? No. SPA Technique Decabon tubing and fittings are unique unto themselves and are not interchangeable with products from other manufacturers.

Image of Ferodo FRP3133W DS1.11 C7 Corvette, Camaro G5 & G6, & CTS-V Front Brake Pads

Ferodo Ferodo FRP3133W DS1.11 C7 Corvette, Camaro G5 & G6, & CTS-V Front Brake Pads $744.91

Ferodo FRP3133W DS1.11 C7 Corvette, Camaro G5 & G6, & CTS-V Front Brake Pads Fitting many Corvette, Camaro G5/G6, and Cadillac CTS models, the Ferodo FRP3133W in the DS1.11 compound is a long duration endurance race brake pad that is also used in the Red Group of advanced track day drivers. Featuring a flat torque curve with an intermediate profile, the Ferodo DS1.11 is repeatable across the entire temperature range, making it a great choice for many track drivers and racers. Ferodo FRP3133W DS1.11 Details: Manufacturer: Ferodo Manufacturer part number: FRP3133W-N Compound: DS1.11 Primary Use: Heavy Duty Endurance Race Street use: No Track only: Yes Application: All vehicle types Average Coefficient of Friction: 0.46µ Temperature Range C: 200 - 750 C Temperature Range F: 392 - 1382 F Compatible with ceramic discs: No Compatible with iron discs: Yes Ferodo DS1.11 Brake Compound Details:The Ferodo DS1.11 is a long duration endurance pad with an incredible flat torque curve across the workable range of 392 to 1382 . Designed to put you on the podium of your next World Racing League race, the Ferodo DS1.11 is a track only pad that is designed for repeatable stopping performance and feel across a very wide temperature spectrum. The Ferodo DS1.11 brake compound makes the chassis repeatable in every brake zone, lap after lap. The cold friction profile of the Ferodo DS1.11 is predictable and grows linear as your pad heats up with very good fade resistance all the way to its maximum 1382 F limit. Another common use of the Ferodo DS1.11 is an advanced track day driver in the red group in a well set-up chassis with sticky rubber and aero. Ferodo FRP3133W DS1.11 Brake Pad Fitment: 2015 Chevrolet Corvette Z06 2016 Chevrolet Corvette Z06 2017 Chevrolet Corvette Grand Sport 2017 Chevrolet Corvette Z06 2017 Chevrolet Camaro SS 1LE 2013 Cadillac CTS-V Sedan 2013 Cadillac CTS-V Wagon 2013 Cadillac CTS-V Coupe 2012 Cadillac CTS-V Sedan 2012 Cadillac CTS-V Wagon 2012 Cadillac CTS-V Coupe 2011 Cadillac CTS-V Sedan 2011 Cadillac CTS-V Wagon 2011 Cadillac CTS-V Coupe 2010 Cadillac CTS-V Sedan 2010 Cadillac CTS-V Wagon 2010 Cadillac CTS-V Coupe 2009 Cadillac CTS-V Sedan 2009 Cadillac CTS-V Wagon 2009 Cadillac CTS-V Coupe 2015 Chevrolet Camaro ZL1 2014 Chevrolet Camaro ZL1 2013 Chevrolet Camaro ZL1 2012 Chevrolet Camaro ZL1 2016 Chevrolet Camaro SS 1LE 2017 Chevrolet Camaro ZL1

Carbotech Brakes Carbotech 2015 VW Golf GTI S "Non-Performance Version" Brake Pad Set from $278.00

Carbotech Brake Pads Carbotech Brake Pads for 2015 VW Golf GTI S, Non-Performance Version, Front Brake pad in AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer Part Number: CT1760 Material thickness of pad material and backing plate: FMSI number: D1760 [img-12105-left-large_default] Carbotech Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. [img-12105-left-large_default]

Carbotech Brakes Carbotech Race Pads Brembo Gran Turismo 4 Piston 17mm from $156.00

CARBOTECH BRAKE PADS Carbotech Race Pads For Brembo Gran Turismo 4 Piston Caliper in 17mm (.665") thickness. Available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. Front. AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer Part Number BRAKE COMPOUNDS Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F.

Recaro Recaro Pole Position N.G. (FIA) Racing Seat from $1,295.00

Recaro Pole Position N.G. (FIA) Racing Seat The Recaro Pole Position N.G. (FIA) racing seat provides the best starting position for beginners and professionals alike who are looking to compete for podium places from the front row. The Pole Position's generous array of features and numerous options for personalizing the cushions and seat covers make it a popular favorite in GT, touring cars and club-racing motorsport. Your Racing Seat Makes a Competitive Difference For racing drivers, the seat is one of the most important parts of the car. A racing seat with optimal body support during high g-forces, plus great long-term driver comfort equals a competitive edge in driving performance. It’s also a safety device that protects the driver from injury. The Recaro Pole Position N.G. (FIA) gives you both performance and safety. More than 50 years of experience in racing seat technology goes into its design. The Pole Position is amazingly comfortable, providing the best-possible protection with support that holds the driver firmly in the right position to get the job done. The Recaro Pole Position N.G. (FIA) is available trimmed in Black Velour, Red Jersey/Suede, Black Leather/Grey Suede, or Full Black Leather. Recaro Steel Side Mount Brackets for the Recaro Pole Position N.G. are included. (Part #7223825) Recaro Pole Position N.G. (FIA) Racing Seat Details: FIA certified and crash tested Certified for five years' use in FIA-sanctioned races RECARO proprietary ergonomics: S-shaped backrest with built-in lumbar support that protects against spinal compression in high-impact accidents Weight: ~16.9 lbs (7.7 kg) Aggressive thigh and torso bolstering Long-lasting, high-quality and flame retardant upholstery High quality durable foam Screw-mounted panels at belt slots Replaceable seat and backrest cushions Suitable for 4-, 5- or 6-point harnesses Includes FIA-approved Pole Position N.G. (FIA) Steel Side Mount (item #7223825) Racing Seat Dimensions:

OMP OMP Replacement Center Horn Button $10.00

OMP Center Replacement Horn Button

OMP OMP Targa 330 Steering Wheel $259.00

OMP Targa 330 Steering Wheel The Targa 330 steering wheel from OMP is a flat steering wheel with 3 anodized aluminium spokes. Supplied with horn button. Diameter: 330 mm. Handgrip: Oval 37x24mm Color: Black Suede

OMP OMP Velocita Steering Wheel $259.00

OMP Velocita Steering Wheel The Velocita steering wheel from OMP is a flat steering wheel with 3 anodized aluminium spokes. Supplied with horn button. Diameter: 350 mm. Handgrip: Oval 30x25mm Color: Black Suede

Chillout Systems Chillout Systems 4" 285 CFM Blower $65.00

Chillout Systems 4-Inch 285 CFM Blower Chillout 4-inch 285 CFM blower offers high air output at a low 4.7 amp draw. Lightweight composite ABS housing makes the Chillout 4" blower the most powerful and reliable in its class. CHILLOUT 4-INCH BLOWER FEATURES 285 cubic feet per minute (CFM) 4.7 Amps 12 Volts Lightweight, durable, and ultra-reliable

Girodisc A2-242 Girodisc 2pc Rear Brake Rotors (C8 Corvette) $1,050.00

Discovery Parts is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. Fits Corvette C8 The GiroDisc system is a direct replacement for the OEM brake disc. The 2-piece floating disc will bolt directly to the car and work with OEM calipers perfectly. By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Giro Disc rotors are lighter than OEM pieces. The reduction in rotational and unsprung weight allows for quicker acceleration and suspension response. When used with Pagid or PFC performance brake pads, and Discovery Parts RF-1 brake fluid (also available from CompetitionMotorsport.com), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations. The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece GiroDisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling. Sold/Priced per pair.

Carbotech Brakes Carbotech CT460 Front Brake Pad Set from $170.00

Carbotech CT460 Subaru Front Brake Pad Set Fitting many Subaru front axle applications, the Carbotech CT460 brake pad set is available in AX6, XP8, XP10, XP12, and RP2 compounds to be ready for every type of driving, from spirited daily driving to the deepest of braking at Road Atlanta turn 10. Carbotech CT460 Subaru Front Brake Pad Set Details: Manufacturer: Carbotech Manufacturer part number: CT460 Compounds available: 1521, XP6, XP8, XP10, XP12, XP20, XP24, RP2 Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.

Find anything you need

Racecar